Provided by: llvm-15_15.0.7-10_amd64 
NAME
llvm-symbolizer - convert addresses into source code locations
SYNOPSIS
llvm-symbolizer [options] [addresses…]
DESCRIPTION
llvm-symbolizer reads input names and addresses from the command-line and prints
corresponding source code locations to standard output. It can also symbolize logs
containing Symbolizer Markup via --filter-markup.
If no address is specified on the command-line, it reads the addresses from standard
input. If no input name is specified on the command-line, but addresses are, or if at any
time an input value is not recognized, the input is simply echoed to the output.
Input names can be specified together with the addresses either on standard input or as
positional arguments on the command-line. By default, input names are interpreted as
object file paths. However, prefixing a name with BUILDID: states that it is a hex build
ID rather than a path. This will look up the corresponding debug binary. For consistency,
prefixing a name with FILE: explicitly states that it is an object file path (the
default).
A positional argument or standard input value can be preceded by “DATA” or “CODE” to
indicate that the address should be symbolized as data or executable code respectively. If
neither is specified, “CODE” is assumed. DATA is symbolized as address and symbol size
rather than line number.
llvm-symbolizer parses options from the environment variable LLVM_SYMBOLIZER_OPTS after
parsing options from the command line. LLVM_SYMBOLIZER_OPTS is primarily useful for
supplementing the command-line options when llvm-symbolizer is invoked by another program
or runtime.
EXAMPLES
All of the following examples use the following two source files as input. They use a
mixture of C-style and C++-style linkage to illustrate how these names are printed
differently (see --demangle).
// test.h
extern "C" inline int foz() {
return 1234;
}
// test.cpp
#include "test.h"
int bar=42;
int foo() {
return bar;
}
int baz() {
volatile int k = 42;
return foz() + k;
}
int main() {
return foo() + baz();
}
These files are built as follows:
$ clang -g test.cpp -o test.elf
$ clang -g -O2 test.cpp -o inlined.elf
Example 1 - addresses and object on command-line:
$ llvm-symbolizer --obj=test.elf 0x4004d0 0x400490
foz
/tmp/test.h:1:0
baz()
/tmp/test.cpp:11:0
Example 2 - addresses on standard input:
$ cat addr.txt
0x4004a0
0x400490
0x4004d0
$ llvm-symbolizer --obj=test.elf < addr.txt
main
/tmp/test.cpp:15:0
baz()
/tmp/test.cpp:11:0
foz
/tmp/./test.h:1:0
Example 3 - object specified with address:
$ llvm-symbolizer "test.elf 0x400490" "FILE:inlined.elf 0x400480"
baz()
/tmp/test.cpp:11:0
foo()
/tmp/test.cpp:8:10
$ cat addr2.txt
FILE:test.elf 0x4004a0
inlined.elf 0x400480
$ llvm-symbolizer < addr2.txt
main
/tmp/test.cpp:15:0
foo()
/tmp/test.cpp:8:10
Example 4 - BUILDID and FILE prefixes:
$ llvm-symbolizer "FILE:test.elf 0x400490" "DATA BUILDID:123456789abcdef 0x601028"
baz()
/tmp/test.cpp:11:0
bar
6295592 4
$ cat addr3.txt
FILE:test.elf 0x400490
DATA BUILDID:123456789abcdef 0x601028
$ llvm-symbolizer < addr3.txt
baz()
/tmp/test.cpp:11:0
bar
6295592 4
Example 5 - CODE and DATA prefixes:
$ llvm-symbolizer --obj=test.elf "CODE 0x400490" "DATA 0x601028"
baz()
/tmp/test.cpp:11:0
bar
6295592 4
$ cat addr4.txt
CODE test.elf 0x4004a0
DATA inlined.elf 0x601028
$ llvm-symbolizer < addr4.txt
main
/tmp/test.cpp:15:0
bar
6295592 4
Example 6 - path-style options:
This example uses the same source file as above, but the source file’s full path is
/tmp/foo/test.cpp and is compiled as follows. The first case shows the default absolute
path, the second –basenames, and the third shows –relativenames.
$ pwd
/tmp
$ clang -g foo/test.cpp -o test.elf
$ llvm-symbolizer --obj=test.elf 0x4004a0
main
/tmp/foo/test.cpp:15:0
$ llvm-symbolizer --obj=test.elf 0x4004a0 --basenames
main
test.cpp:15:0
$ llvm-symbolizer --obj=test.elf 0x4004a0 --relativenames
main
foo/test.cpp:15:0
OPTIONS
--adjust-vma <offset>
Add the specified offset to object file addresses when performing lookups. This
can be used to perform lookups as if the object were relocated by the offset.
--basenames, -s
Print just the file’s name without any directories, instead of the absolute path.
--build-id
Look up the object using the given build ID, specified as a hexadecimal string.
Mutually exclusive with --obj.
--color [=<always|auto|never>]
Specify whether to use color in --filter-markup mode. Defaults to auto, which
detects whether standard output supports color. Specifying --color alone is
equivalent to --color=always.
--debuginfod, --no-debuginfod
Whether or not to try debuginfod lookups for debug binaries. Unless specified,
debuginfod is only enabled if libcurl was compiled in (LLVM_ENABLE_CURL) and at
least one server URL was provided by the environment variable DEBUGINFOD_URLS.
--demangle, -C
Print demangled function names, if the names are mangled (e.g. the mangled name
_Z3bazv becomes baz(), whilst the non-mangled name foz is printed as is). Defaults
to true.
--dwp <path>
Use the specified DWP file at <path> for any CUs that have split DWARF debug data.
--fallback-debug-path <path>
When a separate file contains debug data, and is referenced by a GNU debug link
section, use the specified path as a basis for locating the debug data if it cannot
be found relative to the object.
--filter-markup
Reads from standard input, converts contained Symbolizer Markup into human-readable
form, and prints the results to standard output. The following markup elements are
not yet supported:
• {{{hexdict}}}
• {{{dumpfile}}}
The {{{bt}}} backtrace element reports frames using the following syntax:
#<number>[.<inline>] <address> <function> <file>:<line>:<col> (<module>+<relative
address>)
<inline> provides frame numbers for calls inlined into the caller coresponding to
<number>. The inlined call numbers start at 1 and increase from callee to caller.
<address> is an address inside the call instruction to the function. The address
may not be the start of the instruction. <relative address> is the corresponding
virtual offset in the <module> loaded at that address.
--functions [=<none|short|linkage>], -f
Specify the way function names are printed (omit function name, print short
function name, or print full linkage name, respectively). Defaults to linkage.
--help, -h
Show help and usage for this command.
--inlining, --inlines, -i
If a source code location is in an inlined function, prints all the inlined frames.
This is the default.
--no-inlines
Don’t print inlined frames.
--no-demangle
Don’t print demangled function names.
--obj <path>, --exe, -e
Path to object file to be symbolized. If - is specified, read the object directly
from the standard input stream. Mutually exclusive with --build-id.
--output-style <LLVM|GNU|JSON>
Specify the preferred output style. Defaults to LLVM. When the output style is set
to GNU, the tool follows the style of GNU’s addr2line. The differences from the
LLVM style are:
• Does not print the column of a source code location.
• Does not add an empty line after the report for an address.
• Does not replace the name of an inlined function with the name of the topmost
caller when inlined frames are not shown.
• Prints an address’s debug-data discriminator when it is non-zero. One way to
produce discriminators is to compile with clang’s -fdebug-info-for-profiling.
JSON style provides a machine readable output in JSON. If addresses are
supplied via stdin, the output JSON will be a series of individual objects.
Otherwise, all results will be contained in a single array.
$ llvm-symbolizer --obj=inlined.elf 0x4004be 0x400486 -p
baz() at /tmp/test.cpp:11:18
(inlined by) main at /tmp/test.cpp:15:0
foo() at /tmp/test.cpp:6:3
$ llvm-symbolizer --output-style=LLVM --obj=inlined.elf 0x4004be 0x400486 -p --no-inlines
main at /tmp/test.cpp:11:18
foo() at /tmp/test.cpp:6:3
$ llvm-symbolizer --output-style=GNU --obj=inlined.elf 0x4004be 0x400486 -p --no-inlines
baz() at /tmp/test.cpp:11
foo() at /tmp/test.cpp:6
$ clang -g -fdebug-info-for-profiling test.cpp -o profiling.elf
$ llvm-symbolizer --output-style=GNU --obj=profiling.elf 0x401167 -p --no-inlines
main at /tmp/test.cpp:15 (discriminator 2)
$ llvm-symbolizer --output-style=JSON --obj=inlined.elf 0x4004be 0x400486 -p
[
{
"Address": "0x4004be",
"ModuleName": "inlined.elf",
"Symbol": [
{
"Column": 18,
"Discriminator": 0,
"FileName": "/tmp/test.cpp",
"FunctionName": "baz()",
"Line": 11,
"StartAddress": "0x4004be",
"StartFileName": "/tmp/test.cpp",
"StartLine": 9
},
{
"Column": 0,
"Discriminator": 0,
"FileName": "/tmp/test.cpp",
"FunctionName": "main",
"Line": 15,
"StartAddress": "0x4004be",
"StartFileName": "/tmp/test.cpp",
"StartLine": 14
}
]
},
{
"Address": "0x400486",
"ModuleName": "inlined.elf",
"Symbol": [
{
"Column": 3,
"Discriminator": 0,
"FileName": "/tmp/test.cpp",
"FunctionName": "foo()",
"Line": 6,
"StartAddress": "0x400486",
"StartFileName": "/tmp/test.cpp",
"StartLine": 5
}
]
}
]
--pretty-print, -p
Print human readable output. If --inlining is specified, the enclosing scope is
prefixed by (inlined by). For JSON output, the option will cause JSON to be
indented and split over new lines. Otherwise, the JSON output will be printed in a
compact form.
$ llvm-symbolizer --obj=inlined.elf 0x4004be --inlining --pretty-print
baz() at /tmp/test.cpp:11:18
(inlined by) main at /tmp/test.cpp:15:0
--print-address, --addresses, -a
Print address before the source code location. Defaults to false.
$ llvm-symbolizer --obj=inlined.elf --print-address 0x4004be
0x4004be
baz()
/tmp/test.cpp:11:18
main
/tmp/test.cpp:15:0
$ llvm-symbolizer --obj=inlined.elf 0x4004be --pretty-print --print-address
0x4004be: baz() at /tmp/test.cpp:11:18
(inlined by) main at /tmp/test.cpp:15:0
--print-source-context-lines <N>
Print N lines of source context for each symbolized address.
$ llvm-symbolizer --obj=test.elf 0x400490 --print-source-context-lines=3
baz()
/tmp/test.cpp:11:0
10 : volatile int k = 42;
11 >: return foz() + k;
12 : }
--relativenames
Print the file’s path relative to the compilation directory, instead of the
absolute path. If the command-line to the compiler included the full path, this
will be the same as the default.
--verbose
Print verbose address, line and column information.
$ llvm-symbolizer --obj=inlined.elf --verbose 0x4004be
baz()
Filename: /tmp/test.cpp
Function start filename: /tmp/test.cpp
Function start line: 9
Function start address: 0x4004b6
Line: 11
Column: 18
main
Filename: /tmp/test.cpp
Function start filename: /tmp/test.cpp
Function start line: 14
Function start address: 0x4004b0
Line: 15
Column: 18
--version, -v
Print version information for the tool.
@<FILE>
Read command-line options from response file <FILE>.
WINDOWS/PDB SPECIFIC OPTIONS
--dia Use the Windows DIA SDK for symbolization. If the DIA SDK is not found,
llvm-symbolizer will fall back to the native implementation.
MACH-O SPECIFIC OPTIONS
--default-arch <arch>
If a binary contains object files for multiple architectures (e.g. it is a Mach-O
universal binary), symbolize the object file for a given architecture. You can
also specify the architecture by writing binary_name:arch_name in the input (see
example below). If the architecture is not specified in either way, the address
will not be symbolized. Defaults to empty string.
$ cat addr.txt
/tmp/mach_universal_binary:i386 0x1f84
/tmp/mach_universal_binary:x86_64 0x100000f24
$ llvm-symbolizer < addr.txt
_main
/tmp/source_i386.cc:8
_main
/tmp/source_x86_64.cc:8
--dsym-hint <path/to/file.dSYM>
If the debug info for a binary isn’t present in the default location, look for the
debug info at the .dSYM path provided via this option. This flag can be used
multiple times.
EXIT STATUS
llvm-symbolizer returns 0. Other exit codes imply an internal program error.
SEE ALSO
llvm-addr2line(1)
AUTHOR
Maintained by the LLVM Team (https://llvm.org/).
COPYRIGHT
2003-2023, LLVM Project