Provided by: mylvmbackup_0.15-1.3_all 
NAME
mylvmbackup - a utility for creating MySQL backups using LVM snapshots
SYNOPSIS
mylvmbackup [OPTIONS]
DESCRIPTION
mylvmbackup is a tool for quickly creating full physical backups of a MySQL server's data
files. To perform a backup, mylvmbackup obtains a read lock on all tables and flushes all
server caches to disk, makes an LVM snapshot of the volume containing the MySQL data
directory, and unlocks the tables again. The snapshot process takes only a small amount of
time. When it is done, the server can continue normal operations, while the actual file
backup proceeds.
The LVM snapshot is mounted to a temporary directory and all data is backed up using the
tar program by default. The archive files are created using names in the form of
backup-YYYYMMDD_hhmmss_mysql.tar.gz, where YYYY, MM, DD, hh, mm and ss represent the year,
month, day, hour, minute, and second of the time at which the backup occurred. The default
prefix backup, date format and file suffix may be modified. The use of timestamped archive
names allows you to run mylvmbackup many times without risking to overwrite old archives.
It is possible to preserve only a defined number of last backups, to avoid running out of
disk space.
Alternatively, instead of tar, you can use rsync, rsnap or zbackup to perform the
archiving.
The rsync backup can perform both local backups as well as backing up to a remote server
using rsyncd or rsync via SSH.
rsnap is a wrapper around rsync to automatically maintain and rotate a given number of
last backups (7 by default). It utilizes hard links to link to unchanged files for saving
disk space.
zbackup is a globally-deduplicating backup tool. Feed a large .tar into it, and it will
store duplicate regions of it only once, then compress and optionally encrypt the result.
Feed another .tar file, and it will also re-use any data found in any previous backups.
This way only new changes are stored, and as long as the files are not very different, the
amount of storage required is very low. Any of the backup files stored previously can be
read back in full at any time.
Moreover, a backup type none is provided for cases where the user wants to use mylvmbackup
only for creating the snapshots and intends to perform the actual backup by using the
appropriate hooks. (Or for cases where the snapshot itself is considered to be the
backup).
mylvmbackup also provides several methods for logging and reporting the progress and
success of a backup run. The log messages can either be printed to the console (STDOUT) or
logged via syslog. Additionally, a report can be sent to you via email.
GENERAL HINTS
It is required to run mylvmbackup on the same host where the MySQL server runs. If your
MySQL daemon is not listening on localhost or using the default socket location, you must
specify --host or --socket. Even though mylvmbackup communicates with the server through a
normal client connection to obtain the read lock and flush data, it performs the actual
backup by accessing the file system directly. It is also a requirement that the MySQL
server's data directory resides on an LVM volume. (It is, however, a good idea to do the
LVM backup to a different partition than the one where the data directory resides.
Otherwise, there is a good chance that LVM will run out of undo space for LVM snapshot
maintenance and the backup will fail.)
The user who invokes mylvmbackup must have sufficient filesystem permissions to create the
LVM snapshot and mount it. This includes read/write access to the backup directory.
If you plan to back up InnoDB tables using LVM snapshots, be advised that it is not
sufficient to lock the tables and issue the FLUSH TABLES command to get the table files
into a consistent state. When starting the MySQL server from these restored files, InnoDB
will detect these tables as being in an inconsistent state and will perform a log recovery
run before the tables can be accessed again. As this can potentially take some time (which
you may not want to spend after restoring a server and trying to get it back on its feet
as fast as possible), consider using the option --innodb_recover, which will perform the
recovery operation on the backup snapshot prior to archiving it.
The recovery operation is performed by spawning a second mysqld instance that uses the
snapshot volume as the data directory. Note that this functionality currently assumes a
default InnoDB configuration in which all InnoDB table spaces and log files are stored
inside of the data directory - it does not work properly if you use options like
--innodb-data-home-dir, --innodb-data-file-path or --innodb-log-group-home-dir that modify
the default file layout for InnoDB tables.
If you use InnoDB tables exclusively, you may also want to consider to include the option
--skip_flush_tables, to avoid the probably time-consuming and in this case unnecessary
flushing of buffers. But don't enable this option when MyISAM tables are involved!
HOOKS
It is possible to run arbitrary external programs or scripts (hooks) at various stages of
the backup process, to perform additional actions as part of the backup process.
These scripts or symbolic links to executables should be placed in the directory that the
hooksdir configuration option points to (/usr/share/mylvmbackup by default). They should
return zero upon successful completion, any non-zero return value will be considered a
failure which will be logged.
Hook scripts can also be implemented as Perl modules. The module must be named hookname.pm
and must be a package of type hookname. The module must implement execute() which is
called by mylvmbackup to initiate the hook. It must return boolean true/false (1 or 0) on
success/failure. execute() will be passed 2 parameters. The first parameter is a clone()
of the global database handle $dbh. This will allow hook scripts to interact with the
database using the established connection. The second parameter is a string containing
any messages passed to the run_hook() function. The module must also implement errmsg()
which will return a string error message to be sent to log_msg(). This will be called by
mylvmbackup when execute() returns false/0.
The names of the scripts or symbolic links reflect the stage in which the hook will be
called. Currently, the following stages exist:
preconnect
before a connection to the database server is established
preflush
before calling FLUSH TABLES
presnapshot
before the file system snapshot is created
preunlock
before the database tables are unlocked again
predisconnect
before the connection to the database server is released
premount
before the snapshot volume is mounted
prebackup
before the snapshot backup will be performed
backupsuccess
after a successful backup
backupfailure
after a failed backup
logerr
when an error is logged
precleanup
before the snapshot is unmounted and discarded
These hooks are optional and will only be called if a file for the particular stage exists
and is executable. Note that hooks implemented as Perl modules (hookname.pm) have priority
over "plain" hook scripts (hookname), if both exist, only the first one will be used. The
execution of all hooks can be suppressed by passing the --skip_hooks option or by setting
the skip_hooks configuration option to 1;
OPTIONS
mylvmbackup supports the following command line options. The same options can also be
defined in the /etc/mylvmbackup.conf configuration file (omitting the leading dashes, of
course). A sample configuration file is included in the distribution.
--action=string
Selects the mode of action. Possible values are backup and purge.
When this option is omitted, the backup action is assumed by default, which performs
the actual backup creation. Older backup files are preserved.
The purge action can be used to remove older tar or local rsync backups from the
backup directory, except for the a configurable number of most recent backups, defined
by the backupretention option. The backup creation process is skipped in this case.
Note that this option erases all files contained in this directory that match the
criterion of being older than the last n backup files (with the exception of hidden
(dot) files!
--user=string
Specifies the username to use for connecting to the MySQL server. The default is
root.
--password=string
Specifies the password to use for connecting to the MySQL server. The default is the
empty string (no password). Alternatively, you can set the password by defining the
environment variable MYSQL_PWD prior to starting the script. Note however that this
method is considered to be highly insecure, as it's possible for other users to obtain
the password by examining the environment variables of the running process. See the
MySQL Reference manual for more details on password security.
--host=string
Specifies the host name to use for connecting to the MySQL server. Note that
mylvmbackup needs to be run on the same system that the MySQL server to be backed up
runs on - do not enter a remote host's host name or IP address here! A non-empty
value for host other than localhost overrides any given socket path value. The
default is the empty string.
--port=number
Specifies the TCP port number to use for connecting to the MySQL server. This value
is only honoured, if host is provided as well and is not equal to localhost. The
default is the empty string.
--socket=string
Specifies the path to the local socket file, if it is not located at the default
location. The default is the empty string.
--quiet
Suppresses logging of informal messages. Warnings and errors will still be printed or
logged (depending on the selected logging mechanism). The default is verbose logging.
--innodb_recover
Run InnoDB recovery on the writable snapshot prior to performing the backup.
--recoveryopts
Additional values to pass to the startup options of the separate MySQL instance that
gets spawned to perform the InnoDB log recovery option. Depending on your MySQL
Server version, you may have to modify these startup parameters.
The default is --skip-networking --skip-grant --bootstrap --skip-syslog
--skip-slave-start.
--skip_flush_tables
Don't issue a FLUSH TABLES WITH READ LOCK command before creating the snapshot. Only
use this option when backing up InnoDB tables (as they don't support this function
anyway and will require recovery in any case). This option skips the (probably time
consuming) flushing of buffers.
--extra_flush_tables
If your database performs a lot of writes, it may help to perform an extra initial
FLUSH TABLES so that the lvcreate can finish within the interactivity timeout during
the read-locked flush.
--pidfile=string
Specifies the full path and file name to the PID file of the server instance that is
spawned to perform the InnoDB recovery (see option --innodb_recover). Must be
different from the PID file that the actual running server uses. The default is
/var/run/mysqld/mylvmbackup_recoverserver.pid
--lvcreate=string
Specifies the pathname for the lvcreate program. The default is lvcreate.
--lvremove=string
Specifies the pathname for the lvremove program. The default is lvremove.
--lvs=string
Specifies the pathname for the lvs program. The default is lvs.
--mysqld_safe=string
Specifies the pathname for the mysqld_safe program. The default is mysqld_safe. Only
used to perform InnoDB recovery.
--mycnf=string
Specifies the name of a MySQL config file (e.g. /etc/my.cnf) or an entire config
directory (e.g. /etc/mysql) to include in the backup. The default is /etc/my.cnf.
--skip_mycnf
Skip backing up the MySQL configuration. The default is to include a copy of the
MySQL configuration in the backup.
--hooksdir=string
The location of external scripts or executable to be called during various stages of
the backup. See the HOOKS section in this manual page for more info. The default is
/usr/share/mylvmbackup.
--skip_hooks
Skip invoking any external hooks during the backup.
--vgname=string
Specifies the volume group of the logical volume where the MySQL data directory is
located. The default is mysql.
--lvname=string
Specifies the name of the logical volume where the MySQL data directory is located.
The default is data.
--backuplv=string
Specifies the name used for the snapshot volume. If left empty, _snapshot will simply
be appended to the original volume name (e.g. data_snapshot).
It is possible to use selected timestr() formatting sequences to create snapshot
volume names which contain a dynamic date value. This can be useful if you use thin
provisioned snapshots as the actual backup, by enabling the keep_snapshot option.
Currently, the following format strings are supported:
%Y 4-digit year (e.g. 2009)
%m Month (01..12)
%d Day of month, leading zero
%h Month abbreviation,
%H Hour, 24 hour clock, leading zero
%M Minute, leading zero
%S Seconds, leading zero
Example: $backuplv=backup-%Y-%m-%d-%H-%M-%S will expand to backup-2013-06-07-14-08-45.
--keep_snapshot
If this option is given, mylvmbackup will not remove the snapshot before terminating.
Note that keeping multiple LVM snapshots open at the same time can reduce I/O
performance and you will need to manually discard the snapshot before invoking
mylvmbackup again.
--keep_mount
If this option is given, mylvmbackup will not remove the mounted partition before
terminating. This option also implies keep_snapshot=1, as it would not be useful if
the snapshot is removed. You need to manually unmount this directory before invoking
mylvmbackup again.
--thin
If this option is given, mylvmbackup will expect that the LVM volume is using thin
provisioning and that the snapshot will use physical space from the existing thin
pool. Any size specified with lvsize is ignored.
--relpath=string
Relative path on the logical volume to the MySQL data directory (no leading or
trailing slash). Example: the logical volume is mounted on /var/lib, but the MySQL
data directory is /var/lib/mysql. In this case, relpath should be set to mysql. The
default is the empty string.
--lvsize=string
Specifies the size for the snapshot volume. The default is 5G (5 gigabytes).
--backuptype=string
Specifies what type of backup to perform. The available options are tar, rsync, rsnap,
zbackup and none. Note that using zbackup still requires a tar executable to prepare
the backup archives.
--backupretention=string
Specifies how many previous backups (tar archives or rsync directories only) to keep
in the backup directory when performing the purge action. The default is 0 (keep all
backups).
Note that this feature only works on a local backup directory with a static directory
name! If you use timestr() formatting sequences for the backup directory, the
retention mode will not work.
The script looks at the last modification time (mtime) of each file and directory to
determine which files will be removed.
Be advised that this operation deletes all files and directories in the backup
directory that are older than the last n files (with the exception of hidden (dot)
files!
--prefix=string
Prefix added to the backup file names. It is also appended to the name of the
directory used to mount the snapshot volume. The default value is backup.
--suffix=string
Suffix added to the backup file names (after the time stamp). The default value is
_mysql.
--datefmt=string
Format of the time stamp included in the backup file name. See the Date::Format
perldoc page for a description of the format. The default value is %Y%m%d_%H%M%S,
which creates a time stamp like YYYYMMDD_HHMMSS, e.g. 20070531_112549 Can be empty as
well, to suppress adding a time stamp (e.g. when using rsync to always sync into the
same backup directory).
--mountdir=string
Path for mounting the snapshot volume to. The default value is
/var/run/mysqld/mylvmbackup/mnt/. If the directory does not exist, it will be
created.
It is possible to use selected timestr() formatting sequences to create directory
names which contain a dynamic date value. Currently, the following format strings are
supported:
%Y 4-digit year (e.g. 2009)
%m Month (01..12)
%d Day of month, leading zero
%h Month abbreviation,
%H Hour, 24 hour clock, leading zero
%M Minute, leading zero
%S Seconds, leading zero
Example: $mountdir=/path/to/%Y-%m-%d will expand to /path/to/2009-06-13
--backupdir=string
Specifies the pathname of the directory where the archive files will be written to.
The backup directory must not be on the same volume as the MySQL data directory. If
the directory does not exist, it will be created.
It is possible to use selected timestr() formatting sequences to create directory
names which contain a dynamic date value. Currently, the following format strings are
supported:
%Y 4-digit year (e.g. 2009)
%m Month (01..12)
%d Day of month, leading zero
%h Month abbreviation,
%H Hour, 24 hour clock, leading zero
%M Minute, leading zero
%S Seconds, leading zero
Example: $mountdir=/path/to/%Y-%m-%d will expand to /path/to/2009-06-13
Instead of a local directory, you can also provide a valid rsync URL here, e.g.
username@hostname:/path, hostname:path or hostname::rsync-module/path. This requires
a properly configured remote rsync setup (e.g. pre-setup SSH keys or a working rsyncd
configuration).
Note that the backupretention option does not work for rsync URLs or directory names
that use format strings. You need to define a static local directory name in backupdir
if you want to use the purge action to automatically remove older backups from the
backup directory.
The default is /var/run/mysqld/mylvmbackup/backup/
--mount=string
Specifies the pathname for the mount program. The default is mount.
--umount=string
Specifies the pathname for the umount program. The default is umount.
--tar=string
Specifies the pathname for the tar program. The default is tar.
--tararg=string
Specifies the initial arguments for the tar program. The default is cvf.
--tarsuffixarg=string
Specifies the suffix arguments for the tar program. The default is the empty string.
To exclude a database, you would pass --exclude dbname here.
--tarfilesuffix=string
Specifies the suffix for the tarball. This value should be set according to the
selected compression method (e.g. .tar.bz2 for bzip2 compression). The default is
.tar.gz.
--compress=string
Specifies the name of the compression program. Only used if backuptype is set to tar.
Some possibilities are gzip, bzip2 or lzma. The program must support reading the to
be compressed data from stdin and writing to stdout, without requiring intermediate
temporary files (for this reason, 7zip cannot be used). It's also possible to use cat.
In this case, no compression will be done. Make sure to update the compressarg option
and the tarfilesuffix accordingly. The default is gzip. Can be left empty.
--compressarg=string
Specifies the command line options given to the compress program. For gzip, that would
be --stdout --verbose --best, for lzma or bzip2 --stdout --verbose -7 and for cat, it
would be empty. The default is --stdout --verbose --best.
--rsnap=string
Specifies the pathname for the rsnap program. The default is rsnap.
--rsnaparg=string
Specifies the arguments for the rsnap program. The default is 7, which causes it to
keep the last 7 snapshot (useful when running mylvmbackup once per day).
--rsnaprsyncarg=string
Specifies the arguments for the rsync process that is spawned by rsnap, e.g. --exclude
\*.o --bwlimit=8. You don't need to provide the double dashes usually required by
rsnap to separate these arguments. Default value is the empty string.
--rsync=string
Specifies the pathname for the rsync program. The default is rsync.
--rsyncarg=string
Specifies the arguments for the rsync program. The default is -avWP. You must ensure
that the recursive option is included either implicitly by -a, or explicitly by using
-r.
--zbackup=string
Specifies the pathname for the zbackup program. The default is zbackup.
--zbackuparg=string
Specifies the arguments for the zbackup program. The default is --non-encrypted.
You may use --password-file /path/to/pass to create an encrypted zbackup repository.
The backup repository located in backupdir will be initialized automatically by
running zbackup init before the first invocation.
--xfs
Use the nouuid mount option to safely mount snapshot partitions that use the XFS file
system.
--log_method=string
How to log output from this script. Valid options are console, syslog or both. The
default value is console. Enabling the syslog option requires an installed Sys::Syslog
Perl module.
--syslog_socktype=string
What type of socket to use for connecting to the syslog service. Valid options are
native, tcp and udp. The default value is native.
--syslog_facility=string
Define a particular syslog facility Default value is the empty string.
--syslog_remotehost=string
Host name of a remote syslog server.
--mail_report_on=string
Enable sending the logging output via email to a specified email address.
This option requires an installed MIME::Lite Perl module as well as a functional local
sendmail (or alternative) facility.
You should also review and adjust the mail_from, mail_to and mail_subject
configuration options to match you requirements.
Supported values are never, this disables the mail reporting completely. A value of
always sends an email report for each invocation of mylvmbackup, errors only sends a
report in case of an error condition.
The default value is never.
--mail_from=string
The email address to be used in the From: header for email reports (requires the
mail_report option to be set). The default value is root@localhost.
--mail_to=string
The email address to be used to send email reports to (requires the mail_report option
to be set). The default value is root@localhost.
--mail_subject=string
The text to be used in the Subject: header for email reports (requires the mail_report
option to be set). The default value is "mylvmbackup report for localhost".
--configfile=string
Specify an alternative configuration file. The default is /etc/mylvmbackup.conf.
--help
Displays a help message showing the available options.
FILES
/etc/mylvbackup.conf
The mylvmbackup configuration file
mylvmbackup
The executable Perl script that performs the work.
REQUIREMENTS
For proper operation mylvmbackup requires Perl 5 with the DBI and DBD::mysql modules. It
also needs the Config::IniFiles to read the global configuration file of the program.
Date::Format is required to create the time stamp used in the backup file names. In
addition, it utilizes Getopt::Long, File::Basename and File::Temp, which usually are part
of the default Perl distribution. File::Copy::Recursive is used to copy the MySQL
configuration file(s). Sys::Syslog is only required in case you want to enable the syslog
log facility. The MIME::Lite module is required when you enable the mail reporting
functionality. It also requires a functional local sendmail (or alternative) facility.
It also requires several other external programs: GNU tar and gzip to back up the data,
LVM utilities (lvcreate, lvremove and lvs) to create and remove the LVM snapshot, and the
system utilities mount and umount. Please note that mylvmbackup requires Linux LVM
Version 2 or higher. It does not work on LVMv1, as this version does not support writable
snapshots.
Optionally, rsync or rsnap may be required instead of tar and gzip, depending on which
backup type you choose.
SEE ALSO
mount(8), tar(1), lvcreate(8), lvremove(8), lvs(8), umount(8), rsync(1)
AUTHOR
This program was initially written by Aleksey "Walrus" Kishkin from MySQL AB, with
suggestions from Peter Zaitsev and Lenz Grimmer.
It is currently maintained by Lenz Grimmer <lenz@grimmer.com>
RESOURCES
Main web site: <http://www.lenzg.net/mylvmbackup>
Mailing list: <https://launchpad.net/~mylvmbackup-discuss>
Source code, bug tracker: <https://launchpad.net/mylvmbackup>
CREDITS
See the file CREDITS included in the distribution for a list of individual contributors.
COPYING
mylvmbackup is distributed under the GNU public license. See the file COPYING for details.