NAME

       nbdkit-error-filter - inject errors for testing clients

SYNOPSIS

        nbdkit --filter=error PLUGIN
            [error=EPERM|EIO|ENOMEM|EINVAL|ENOSPC|ESHUTDOWN]
            [error-rate=10%|0.1]
            [error-file=/tmp/inject]
            [error-pread=...] [error-pread-rate=...] [error-pread-file=...]
            [error-pwrite=...] [error-pwrite-rate=...] [error-pwrite-file=...]
            [error-trim=...] [error-trim-rate=...] [error-trim-file=...]
            [error-zero=...] [error-zero-rate=...] [error-zero-file=...]
            [error-extents=...] [error-extents-rate=...] [error-extents-file=...]
            [error-cache=...] [error-cache-rate=...] [error-cache-file=...]

DESCRIPTION

       "nbdkit-error-filter" is an nbdkit filter that injects random errors into replies from the
       server.  This is used for testing that NBD clients can handle errors.

       All parameters are optional, but you should usually specify one of the "error-rate" or
       "error-*-rate" parameters, otherwise this filter will do nothing.

EXAMPLES

       Inject a low rate of errors randomly into the connection:

        nbdkit --filter=error file disk.img error-rate=1%

       Reading, trimming, cache and extents (block status) requests will be successful, but all
       writes and zeroing will return "No space left on device":

        nbdkit --filter=error file disk.img \
                                   error=ENOSPC \
                                   error-pwrite-rate=100% \
                                   error-zero-rate=100%

       To make all connections fail hard 60 seconds after the server is started, use:

        rm -f /tmp/inject
        nbdkit --filter=error file disk.img \
                                   error-rate=100% \
                                   error-file=/tmp/inject
        sleep 60; touch /tmp/inject

PARAMETERS

       error=EPERM|EIO|ENOMEM|EINVAL|ENOSPC|ESHUTDOWN
           When a random error is injected, you can select which one from the range of possible
           NBD errors (the NBD protocol only supports a limited range of error codes).

           This parameter is optional and the default is "EIO" ("Input/output error").

       error-rate=N%
       error-rate=0..1
           The rate of injected errors per NBD request.  This can be expressed as either a
           percentage between "0%" and "100%" or as a probability between 0 and 1.  If "0%" or 0
           is used then no errors are ever injected, and if "100%" or 1 is used then all requests
           return errors.

           This parameter is optional and the default is "0%".  Unless you set this, the filter
           will do nothing.

       error-file=FILENAME
           Errors will only be injected when FILENAME exists.  (Note you must also specify the
           "error-rate").

           You can use this for fine-grained control over when to inject errors, for example if
           you want to trigger an error at an exact moment during a test, arrange for this file
           to be created at the appropriate time.  Or conversely to test error recovery in a
           client, create the file initially, and then delete it to check the client can recover.

           This parameter is optional.

       error-pread, error-pread-rate, error-pread-file.
           Same as "error", "error-rate" and "error-file" but only apply the settings to NBD
           pread requests.

       error-pwrite, error-pwrite-rate, error-pwrite-file.
           Same as "error", "error-rate" and "error-file" but only apply the settings to NBD
           pwrite requests.

       error-trim, error-trim-rate, error-trim-file.
           Same as "error", "error-rate" and "error-file" but only apply the settings to NBD trim
           requests.

       error-zero, error-zero-rate, error-zero-file.
           Same as "error", "error-rate" and "error-file" but only apply the settings to NBD zero
           requests.

       error-extents, error-extents-rate, error-extents-file.
           (nbdkit ≥ 1.12)

           Same as "error", "error-rate" and "error-file" but only apply the settings to NBD
           block status requests to read extents.

       error-cache, error-cache-rate, error-cache-file.
           (nbdkit ≥ 1.14)

           Same as "error", "error-rate" and "error-file" but only apply the settings to NBD
           cache requests.

NOTES

   Peculiar debug output
       If you are looking at the debugging output (using "nbdkit -f -v") references to the name
       of this filter show up as "error-inject:", and such lines indicate that the filter is not
       altering output, for example:

        nbdkit: file.9: debug: error-inject: pread count=1024 offset=0 flags=0x0

       Conversely, references to the string "error:" occur when the nbdkit_error(3) API was used,
       including when this filter injects an error, as in:

        nbdkit: file.4: error: injecting ENOSPC error into pwrite

FILES

       $filterdir/nbdkit-error-filter.so
           The filter.

           Use "nbdkit --dump-config" to find the location of $filterdir.

VERSION

       "nbdkit-error-filter" first appeared in nbdkit 1.6.

SEE ALSO

       nbdkit(1), nbdkit-file-plugin(1), nbdkit-full-plugin(1), nbdkit-retry-filter(1),
       nbdkit-retry-request-filter(1), nbdkit-filter(3).

AUTHORS

       Richard W.M. Jones

COPYRIGHT

       Copyright Red Hat

LICENSE

       Redistribution and use in source and binary forms, with or without modification, are
       permitted provided that the following conditions are met:

       •   Redistributions of source code must retain the above copyright notice, this list of
           conditions and the following disclaimer.

       •   Redistributions in binary form must reproduce the above copyright notice, this list of
           conditions and the following disclaimer in the documentation and/or other materials
           provided with the distribution.

       •   Neither the name of Red Hat nor the names of its contributors may be used to endorse
           or promote products derived from this software without specific prior written
           permission.

       THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED
       WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
       FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS
       BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
       DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
       OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
       LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
       OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
       POSSIBILITY OF SUCH DAMAGE.