Provided by: nvme-cli_2.5-1_amd64 
NAME
nvme-compare - Send an NVMe Compare command, provide results
SYNOPSIS
nvme-compare <device> [--start-block=<slba> | -s <slba>]
[--block-count=<nlb> | -c <nlb>]
[--data-size=<size> | -z <size>]
[--metadata-size=<metasize> | -y <metasize>]
[--ref-tag=<reftag> | -r <reftag>]
[--data=<data-file> | -d <data-file>]
[--metadata=<meta> | -M <meta>]
[--prinfo=<prinfo> | -p <prinfo>]
[--app-tag-mask=<appmask> | -m <appmask>]
[--app-tag=<apptag> | -a <apptag>]
[--limited-retry | -l]
[--force-unit-access | -f]
[--dir-type=<type> | -T <type>]
[--dir-spec=<spec> | -S <spec>]
[--dsm=<dsm> | -D <dsm>]
[--show-command | -v]
[--dry-run | -w]
[--latency | -t]
[--storage-tag<storage-tag> | -g <storage-tag>]
[--storage-tag-check | -C]
[--force]
DESCRIPTION
The Compare command reads the logical blocks specified by the command from the medium and
compares the data read to a comparison data buffer transferred as part of the command. If
the data read from the controller and the comparison data buffer are equivalent with no
miscompares, then the command completes successfully. If there is any miscompare, the
command completes with an error of Compare Failure. If metadata is provided, then a
comparison is also performed for the metadata.
OPTIONS
-s <slba>, --start-block=<slba>
64-bit address of the first block to access.
-c <nlb>, --block-count=<nlb>
Number of blocks to be accessed (zero-based).
-z <size>, --data-size=<size>
Size of data to be compared in bytes.
-y <metasize>, --metadata-size=<metasize>
Size of metadata to be transferred in bytes.
-r <reftag>, --ref-tag=<reftag>
Reference Tag for Protection Information
-d <data-file>, --data=<data-file>
Data file.
-M <meta>, --metadata=<meta>
Metadata file.
-p <prinfo>, --prinfo=<prinfo>
Protection Information and check field.
+
┌────┬──────────────────────────────────┐
│ │ │
│Bit │ Description │
├────┼──────────────────────────────────┤
│ │ │
│3 │ PRACT: Protection Information │
│ │ Action. When set to 1, PI is │
│ │ stripped/inserted on read/write │
│ │ when the block format’s metadata │
│ │ size is 8. When set to 0, │
│ │ metadata is passes. │
├────┼──────────────────────────────────┤
│ │ │
│2:0 │ PRCHK: Protection Information │
│ │ Check: │
├────┼──────────────────────────────────┤
│ │ │
│2 │ Set to 1 enables checking the │
│ │ guard tag │
├────┼──────────────────────────────────┤
│ │ │
│1 │ Set to 1 enables checking the │
│ │ application tag │
├────┼──────────────────────────────────┤
│ │ │
│0 │ Set to 1 enables checking the │
│ │ reference tag │
└────┴──────────────────────────────────┘
-m <appmask>, --app-tag-mask=<appmask>
App Tag Mask for Protection Information
-a <apptag>, --app-tag=<apptag>
App Tag for Protection Information
-l, --limited-retry
Number of limited attempts to media.
-f, --force-unit-access
FUA option to guarantee that data is stored to media.
-T <type>, --dir-type=<type>
Optional directive type. The nvme-cli only enforces the value be in the defined range
for the directive type, though the NVMe specification (1.3a) defines only one
directive, 01h, for write stream identifiers.
-S <spec>, --dir-spec=<spec>
Optional field for directive specifics. When used with write streams, this value is
defined to be the write stream identifier. The nvme-cli will not validate the stream
requested is within the controller’s capabilities.
-D <dsm>, --dsm=<dsm>
The optional data set management attributes for this command. The argument for this is
the least significant 8 bits of the DSM field in a write command; the most significant
16 bits of the field come from the directive specific field, if used. This may be used
to set attributes for the LBAs being written, like access frequency, type, latency,
among other things, as well as yet to be defined types. Please consult the NVMe
specification for detailed breakdown of how to use this field.
-v, --show-cmd
Print out the command to be sent.
-w, --dry-run
Do not actually send the command. If want to use --dry-run option, --show-cmd option
must be set. Otherwise --dry-run option will be ignored.
-t, --latency
Print out the latency the IOCTL took (in us).
-g <storage-tag>, --storage-tag=<storage-tag>
Variable Sized Expected Logical Block Storage Tag(ELBST).
-C, --storage-tag-check
This flag enables Storage Tag field checking as part of end-to-end data protection
processing.
--force
Ignore namespace is currently busy and performed the operation even though.
EXAMPLES
No examples yet.
NVME
Part of the nvme-user suite