NAME

       pambayer - interpret Bayer patterns

SYNOPSIS

       pambayer -type={1|2|3|4} [-nointerpolate] [pamfile]

       Minimum  unique  abbreviation of option is acceptable.  You may use double hyphens instead
       of single hyphen to denote options.  You may use white space in place of the  equals  sign
       to separate an option name from its value.

DESCRIPTION

       This program is part of Netpbm(1).

       pambayer  reads a Bayer pattern in a 1-deep Netpbm image and produces a color image in PAM
       RGB format as output.

       A Bayer pattern is what you get from the optical sensor in some digital cameras.   Such  a
       camera  doesn't  have  a  red,  green,  and  blue  sensor  in  the exact same place for an
       individual pixel.  Instead, it has red,  green,  and  blue  sensors  laid  out  in  a  two
       dimensional  array.   The  pattern  in  which they are laid out is the Bayer pattern.  The
       input to pambayer is one sample value for each of those sensors, so some samples are  red,
       some are green, and some are blue.

       pambayer  turns  that  into a regular visual image with one pixel per sensor.  For the two
       components of each pixel that are missing  in  the  corresponding  Bayer  input,  pambayer
       averages the sample values from the adjacent pixels that do have that component.

       But  you  can  have pambayer fill in black instead (see the -noninterpolate option), which
       gives you a simpler representation of what the camera saw, on which you might  do  further
       processing.  Such an image still looks right, though considerably dimmer, if you stand far
       enough away and let your eyes do the interpolation.

       The input image is a pseudo-PNM image (pseudo- because while the structure  is  the  same,
       the sample values have different meanings) or PAM image of arbitrary tuple type.  pambayer
       looks at only the first plane of the input.

       The output image is a PAM image of tuple type "RGB", i.e.  a standard  color  image.   You
       can convert this to PPM with pamtopnm(1).

       If  you're  interested  in just one of the primary colors, use pamchannel on the output of
       pambayer to extract it.

OPTIONS

       In addition to the options common to all programs based on libnetpbm (most notably -quiet,
       see
        Common  Options  ⟨index.html#commonoptions⟩  ), pambayer recognizes the following command
       line options:

       -type=n
              This tells which Bayer pattern the input is:

       1      GBG/RGR/GBG matrix

       2      RGR/GBG/RGR matrix

       3      BGB/GRG/BGB matrix

       4      GRG/BGB/GRG matrix

              This option is mandatory.

       -nointerpolate
              Each output pixel position corresponds to one position in the input Bayer  pattern,
              which  means  only one of the three color components is supplied by the input.  For
              the other two, this option  says  to  user  zero.   Without  it,  pambayer  instead
              interpolates from the adjacent pixels that do have that color component.

              This option was new in Netpbm 10.49 (December 2009).

SEE ALSO

       cameratopam(1) pam(1)

HISTORY

       pambayer was new in Netpbm 10.30 (October 2005).

DOCUMENT SOURCE

       This  manual page was generated by the Netpbm tool 'makeman' from HTML source.  The master
       documentation is at

              http://netpbm.sourceforge.net/doc/pambayer.html