Provided by: rauc_1.10.1-1_amd64 
NAME
rauc - safe and secure updating
SYNOPSIS
rauc [OPTIONS...] bundle INPUTDIR BUNDLE
rauc [OPTIONS...] resign INBUNDLE OUTBUNDLE
rauc [OPTIONS...] extract BUNDLE OUTPUTDIR
rauc [OPTIONS...] extract-signature BUNDLE OUTPUTSIG
rauc [OPTIONS...] convert INBUNDLE OUTBUNDLE
rauc [OPTIONS...] encrypt INBUNDLE OUTBUNDLE
rauc [OPTIONS...] install BUNDLE
rauc [OPTIONS...] info BUNDLE
rauc [OPTIONS...] mount BUNDLE
rauc [OPTIONS...] status [SLOTNAME | mark-{good,bad,active} [booted|other|SLOTNAME]]
rauc [OPTIONS...] write-slot SLOTNAME IMAGEFILE
DESCRIPTION
RAUC is a lightweight update client that runs on an Embedded Linux device and reliably
controls the procedure of updating the device with a new firmware.
RAUC is also the tool on the host system that is used to create, inspect and modify update
artifacts for the device.
This manual page documents briefly the rauc command line utility.
It was written for the Debian GNU/Linux distribution to satisfy the packaging
requirements. Thus it should only serve as a summary, reading the comprehensive online
manual (https://rauc.readthedocs.io/) is recommended.
OPTIONS
The following general options can be used with most commands, however not all combinations
make sense.
-c FILENAME, --conf=FILENAME
use the given config file instead of the one at the compiled-in default path
--keyring=PEMFILE
use specific keyring file
--mount=PATH
mount prefix (/mnt/rauc by default)
-d, --debug
enable debug output
--version
display version
-h, --help
print usage
COMMANDS
bundle INPUTDIR BUNDLE
Create a bundle from a content directory.
Options:
--cert=PEMFILE|PKCS11-URL
use given certificate file or the certificate referenced by the given
PKCS#11 URL
--key=PEMFILE|PKCS11-URL
use given private key file or the key referenced by the given PKCS#11 URL
--intermediate=PEMFILE|PKCS11-URL
intermediate CA file or the certificate referenced by the given PKCS#11 URL
--signing-keyring=PEMFILE
verification keyring file
--mksquashfs-args=ARGS
mksquashfs extra args
resign INBUNDLE OUTBUNDLE
Resign an already signed bundle.
Options:
--cert=PEMFILE|PKCS11-URL
use given certificate file or the certificate referenced by the given
PKCS#11 URL
--key=PEMFILE|PKCS11-URL
use given private key file or the key referenced by the given PKCS#11 URL
--intermediate=PEMFILE|PKCS11-URL
intermediate CA file or the certificate referenced by the given PKCS#11 URL
--no-verify
disable bundle verification
--no-check-time
don't check validity period of certificates against current time
--signing-keyring=PEMFILE
verification keyring file
extract BUNDLE OUTPUTDIR
Extract the bundle content to a directory.
Options:
--key=PEMFILE|PKCS11-URL
use given decryption key file or the decryption key referenced by the given
PKCS#11 URL
--trust-environment
trust environment and skip bundle access checks
extract-signature BUNDLE OUTPUTSIG
Extract the bundle signature.
Options:
--key=PEMFILE|PKCS11-URL
use given decryption key file or the decryption key referenced by the given
PKCS#11 URL
--trust-environment
trust environment and skip bundle access checks
convert INBUNDLE OUTBUNDLE
Convert an existing bundle to casync index bundle and store.
Options:
--cert=PEMFILE|PKCS11-URL
use given certificate file or the certificate referenced by the given
PKCS#11 URL
--key=PEMFILE|PKCS11-URL
use given private key file or the key referenced by the given PKCS#11 URL
--intermediate=PEMFILE|PKCS11-URL
intermediate CA file or the certificate referenced by the given PKCS#11 URL
--trust-environment
trust environment and skip bundle access checks
--no-verify
disable bundle verification
--signing-keyring=PEMFILE
verification keyring file
--mksquashfs-args=ARGS
mksquashfs extra args
--casync-args=ARGS
casync extra args
encrypt INBUNDLE OUTBUNDLE
Encrypt a crypt bundle.
Options:
--to PEMFILE
recipient cert(s)
install BUNDLE
Install a bundle.
Options:
--ignore-compatible
disable compatible check
--transaction-id=UUID
custom transaction ID
--progress
show progress bar
--handler-args=ARGS
extra arguments for full custom handler
--override-boot-slot=BOOTNAME
overrides auto-detection of booted slot
info BUNDLE
Print bundle info.
Options:
--no-verify
disable bundle verification
--no-check-time
don't check validity period of certificates against current time
--key=PEMFILE|PKCS11-URL
use given decryption key file or the decryption key referenced by the given
PKCS#11 URL
--output-format=[readable|shell|json|json-pretty|json-2]
select output format
The json-2 output format matches the structure of the InspectBundle D-Bus
API and should be used instead of json or json-pretty.
--dump-cert
dump certificate
--dump-recipients
dump recipients
mount BUNDLE
Mount a bundle for development purposes to the bundle directory in RAUC's mount
prefix. It must be unmounted manually by the user.
status [SLOTNAME | mark-{good,bad,active} [booted|other|SLOTNAME]]
Without further subcommand, it simply shows the system status or status of a specific
slot.
The subcommands mark-good and mark-bad can be used to set the state of a slot
explicitly. These subcommands usually operate on the currently booted slot if not
specified per additional parameter.
The subcommand mark-active allows one to manually switch to a different slot. Here
too, the desired slot can be given per parameter, otherwise the currently booted one
is used.
Options:
--detailed
show more status details
--output-format=[readable|shell|json|json-pretty]
select output format
--override-boot-slot=BOOTNAME
overrides auto-detection of booted slot
write-slot SLOTNAME IMAGEFILE
Write image to slot and bypass all update logic.
ENVIRONMENT
RAUC_KEY_PASSPHRASE
Passphrase to use for accessing key files (signing only)
RAUC_PKCS11_MODULE
Library filename for PKCS#11 module (signing only)
RAUC_PKCS11_PIN
PIN to use for accessing PKCS#11 keys (signing only)
FILES
/etc/rauc/system.conf
The system configuration file is the central configuration in RAUC that abstracts
the loosely coupled storage setup, partitioning and boot strategy of your board to
a coherent redundancy setup world view for RAUC.
RAUC expects its central configuration file /etc/rauc/system.conf to describe the
system it runs on in a way that all relevant information for performing updates and
making decisions are given.
Similar to other configuration files used by RAUC, the system configuration uses a
key-value syntax (similar to those known from .ini files).
AUTHORS
rauc is developed by Jan Luebbe, Enrico Joerns, Juergen Borleis and contributors.
This manual page was written by Michael Heimpold <mhei@heimpold.de>, for the Debian
GNU/Linux system (but may be used by others).
SEE ALSO
casync(1), mksquashfs(1), unsquashfs(1)
RAUC(1)