Ubuntu Manpage: virt-p2v-make-kickstart - Build the virt-p2v kickstart

NAME

       virt-p2v-make-kickstart - Build the virt-p2v kickstart

SYNOPSIS

        virt-p2v-make-kickstart [-o p2v.ks] [--proxy=http://...] repo [repo...]

DESCRIPTION

       virt-p2v(1) converts a physical machine to run virtualized on KVM, managed by libvirt,
       OpenStack, oVirt, Red Hat Enterprise Virtualisation (RHEV), or one of the other targets
       supported by virt-v2v(1).

       Kickstart is a format used by Red Hat-derived distributions (such as Fedora, Red Hat
       Enterprise Linux, CentOS, Scientific Linux, and others) to describe how to make live CDs,
       install the distro, make "Spins" and so on.  It is driven by a kickstart file.

       virt-p2v-make-kickstart builds a kickstart file which can be used to build a bootable P2V
       ISO, live CD, USB key, or PXE image.  This tool only builds the kickstart file, but this
       manual page describes some of the ways you can use the kickstart file.

       The root user on the disk image uses "p2v" as its initial password.

BUILDING THE KICKSTART FILE

       Using virt-p2v-make-kickstart is very simple:

        virt-p2v-make-kickstart fedora

       will build a kickstart file for Fedora.  The kickstart file will be called p2v.ks and
       located in the current directory.

       The parameters are a list of one or more repositories.  Some built-in repositories are
       available: "fedora", "rawhide", "koji" or "rhel-VERSION" (eg. "rhel-7.1").  You can also
       use a URL as a parameter to point to a repository, for example:

        virt-p2v-make-kickstart https://dl.fedoraproject.org/pub/fedora/linux/releases/21/Everything/x86_64/os/

       To control the name of the output file, use the -o parameter.  To tell kickstart to use a
       proxy server or web cache to download files, use the --proxy parameter.

BUILDING A LIVE CD / ISO

       Once you have the kickstart file, you can use livecd-creator(8) to make a live CD:

        sudo livecd-creator p2v.ks

       Before running this note that you should probably run "livecd-creator" in a disposable
       virtual machine for these reasons:

       •   You have to disable SELinux when running the tool.

       •   This tool has to be run as root, and has some nasty failure modes.

       •   You can only create the exact same Live CD distro as the host distro.  Cross-builds
           will fail in strange ways (eg. RHBZ#1092327).

BUILDING A FEDORA SPIN USING KOJI

       This requires "spin-livecd" permissions on Koji, which are not given out usually, even to
       Fedora packagers.  However assuming you have been given these permissions (or have your
       own Koji instance, I guess), then you can do:

        koji spin-livecd [--scratch] virt-p2v 1.XX.YY rawhide x86_64 p2v.ks

       •   Add the "--scratch" option to do a scratch build (recommended for testing).

       •   "1.XX.YY" should match the libguestfs version

       •   Instead of "rawhide" you can use any Koji target.

BUILDING A BOOTABLE USB KEY

       Use the livecd-iso-to-disk(8) program to convert the ISO created above to a USB key:

        sudo livecd-iso-to-disk livecd-p2v.iso /dev/sdX

BUILDING A PXE BOOT IMAGE

       Use the "livecd-iso-to-pxeboot" program to convert the ISO created above to a PXE boot
       image.

        sudo livecd-iso-to-pxeboot livecd-p2v.iso

       This creates a "tftpboot" subdirectory under the current directory containing the files
       required to PXE boot virt-p2v:

        $ ls -1R tftpboot/
        tftpboot/:
        initrd0.img
        pxelinux.0
        pxelinux.cfg/
        vmlinuz0

        tftpboot/pxelinux.cfg:
        default

32 OR 64 BIT VIRT-P2V?

       Virt-p2v can convert any 32 or 64 bit guest, regardless of whether virt-p2v itself is
       built as a 32 or 64 bit binary.  The only restriction is that 64 bit virt-p2v cannot run
       on 32 bit hardware.

       Old virt-p2v 0.9 was always built as a 32 bit (i686) ISO.  This meant that the CD could be
       booted on any 32- or 64-bit i686 or x86-64 hardware, and could convert any guest.  The old
       virt-p2v ISO shipped by Red Hat was based on Red Hat Enterprise Linux (RHEL) 6.

       Since RHEL 7 dropped support for 32 bit machines, current virt-p2v on RHEL can only be
       built for 64 bit.  It cannot run on old 32 bit only hardware.

       Fedora virt-p2v ISOs are generally built for 32 bit, so like the old RHEL 6-based virt-p2v
       0.9 they can boot on any hardware.

TESTING VIRT-P2V USING QEMU

   TESTING THE P2V ISO USING QEMU
       You can use qemu to test-boot the P2V ISO (BIOS mode):

        qemu-kvm -m 1024 -hda /tmp/guest.img -cdrom /tmp/livecd-p2v.iso -boot d

       Note that "-hda" is the (virtual) system that you want to convert (for test purposes).  It
       could be any guest type supported by virt-v2v(1), including Windows or Red Hat Enterprise
       Linux.

       For UEFI:

        qemu-kvm -m 1024 -M q35 \
            -drive if=pflash,format=raw,file=/usr/share/OVMF/OVMF_CODE.fd,readonly=on \
            -drive if=pflash,format=raw,file=/usr/share/OVMF/OVMF_VARS.fd,snapshot=on \
            \
            -drive if=none,format=raw,file=/tmp/guest.img,media=disk,id=guest-disk \
            -device ide-hd,drive=guest-disk,bus=ide.0 \
            \
            -drive if=none,format=raw,file=/tmp/livecd-p2v.iso,media=cdrom,id=p2v-cdrom \
            -device ide-cd,drive=p2v-cdrom,bus=ide.1,bootindex=1

   TESTING PXE SUPPORT USING QEMU
       •   Unpack the tftpboot directory into /tmp (so it appears as /tmp/tftpboot).

       •   Copy pxelinux.0 and ldlinux.c32 from syslinux (usually from /usr/share/syslinux) into
           /tmp/tftpboot.

       •   Adjust the "APPEND" line in /tmp/tftpboot/pxelinux.cfg/default if required.  See
           "KERNEL COMMAND LINE CONFIGURATION" in virt-p2v(1).

       •   Run qemu like this so that it acts as a TFTP and BOOTP server, emulating a netboot:

            qemu-kvm \
                -m 4096 -hda /tmp/guest.img \
                -boot n \
                -netdev user,id=unet,tftp=/tmp/tftpboot,bootfile=/pxelinux.0 \
                -device virtio-net-pci,netdev=unet \
                -serial stdio

           Note that this requires considerably more memory because the PXE image is loaded into
           memory.  Also that qemu’s TFTP server is very slow and the virt-p2v PXE image is very
           large, so it can appear to "hang" after pxelinux starts up.

ADDING EXTRA PACKAGES

       You can install extra packages using the --install option.  This can be useful for making
       a more fully-featured virt-p2v disk with extra tools for debugging and troubleshooting.
       Give a list of packages, separated by commas.  For example:

        virt-p2v-make-kickstart [...] --install tcpdump,traceroute

ADDING AN SSH IDENTITY

       You can inject an SSH identity (private key) file to the kickstart and hence into the ISO
       using the --inject-ssh-identity option.  Note that you cannot inject a key once the ISO
       has been built.

       First create a key pair.  It must have an empty passphrase:

        ssh-keygen -t rsa -N '' -f id_rsa

       This creates a private key ("id_rsa") and a public key ("id_rsa.pub") pair.  The public
       key should be appended to the "authorized_keys" file on the virt-v2v conversion server
       (usually to "/root/.ssh/authorized_keys").

       The private key should be added to the kickstart file and then discarded:

        virt-p2v-make-kickstart [...] --inject-ssh-identity id_rsa
        rm id_rsa

       The ISO can then be built from the kickstart in the usual way (see above), and it will
       contain the embedded SSH identity (/var/tmp/id_rsa).

       When booting virt-p2v, specify the URL of the injected file like this:

        │         User name: [root_____________________________] │
        │                                                        │
        │          Password: [    <leave this field blank>     ] │
        │                                                        │
        │  SSH Identity URL: [file:///var/tmp/id_rsa___________] │

       or if using the kernel command line, add:

        p2v.identity=file:///var/tmp/id_rsa

       For more information, see "SSH IDENTITIES" in virt-p2v(1).

OPTIONS

       --help
           Display help.

       --inject-ssh-identity id_rsa
           Add an SSH identity (private key) file into the kickstart.  See "ADDING AN SSH
           IDENTITY" above.

       --install pkg,pkg,...
           Add extra packages to the kickstart %packages section.  See "ADDING EXTRA PACKAGES"
           above.

       -o OUTPUT
       --output OUTPUT
           Write kickstart to "OUTPUT".  If not specified, the default is p2v.ks in the current
           directory.

       --proxy URL
           Tell the kickstart to use a proxy server or web cache for downloads.

       -v
       --verbose
           Enable verbose output.  Use this if you need to debug problems with the script or if
           you are filing a bug.

       -V
       --version
           Display version number and exit.

FILES

       $libdir/virt-p2v/virt-p2v.xz
           The virt-p2v(1) binary which is copied into the kickstart file.

           The location of the binary can be changed by setting the "VIRT_P2V_DATA_DIR"
           environment variable.

       $datadir/virt-p2v/issue
       $datadir/virt-p2v/launch-virt-p2v.in
       $datadir/virt-p2v/p2v.ks.in
       $datadir/virt-p2v/p2v.service
           Various data files that are used to make the kickstart.

           The location of these files can be changed by setting the "VIRT_P2V_DATA_DIR"
           environment variable.

ENVIRONMENT VARIABLES

       "VIRT_P2V_DATA_DIR"
           The directory where virt-p2v-make-kickstart looks for data files and the virt-p2v
           binary (see "FILES" above).  If not set, a compiled-in location is used.

AUTHORS

       Richard W.M. Jones http://people.redhat.com/~rjones/

COPYRIGHT

       Copyright (C) 2009-2019 Red Hat Inc.

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program.
       If not, see <https://www.gnu.org/licenses/>.

BUGS

       To get a list of bugs against libguestfs (which include virt-p2v), use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of virt-p2v.

       •   Where you got virt-p2v (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

NAME

SYNOPSIS

DESCRIPTION

BUILDING THE KICKSTART FILE

BUILDING A LIVE CD / ISO

BUILDING A FEDORA SPIN USING KOJI

BUILDING A BOOTABLE USB KEY

BUILDING A PXE BOOT IMAGE

32 OR 64 BIT VIRT-P2V?

TESTING VIRT-P2V USING QEMU

ADDING EXTRA PACKAGES

ADDING AN SSH IDENTITY

OPTIONS

FILES

ENVIRONMENT VARIABLES

SEE ALSO

AUTHORS

COPYRIGHT

LICENSE

BUGS