Provided by: wavpack_5.6.0-1_amd64 
NAME
wavpack - encode audio files to wavpack
SYNOPSIS
wavpack [-options] INFILE... [-o OUTFILE]
DESCRIPTION
wavpack encodes the specified source file(s) into WavPack files using the options
provided. The source files may be any of the file format types listed below, and the audio
data may be either uncompressed PCM or DSD (depending on the format). Raw audio may also
be specified (see --raw-pcm). The output filename will be source-name.wv unless overridden
with the -o switch. Multiple input files may be specified resulting in multiple WavPack
files, and in that case -o may be used to specify an alternate target directory. Stdin
and stdout may be specified with “-”. In the case of transcoding from existing WavPack
files, all tags are copied (and may be modified with additional args) and unless an
alternate name or directory is specified, the source files are safely overwritten. To
decode WavPack files back to their original format (or raw audio) use the wvunpack
program.
INPUT FILE FORMATS
• Microsoft RIFF, extension “.wav”, includes BWF and RF64 variants
• WavPack, extension “.wv”, transcode operation, tags copied
• Apple AIFF, extension “.aif”
• Apple Core Audio, extension “.caf”
• Sony Wave64, extension “.w64”
• Philips DSDIFF, extension “.dff”
• Sony DSD Stream, extension “.dsf”
OPTIONS
-a
Adobe Audition (CoolEdit) mode for 32-bit floats
--allow-huge-tags
allow tag data up to 16 MB (embedding > 1 MB is not recommended for portable devices
and may not work with some programs including WavPack pre-4.70)
-bn
enable hybrid compression, n = 2.0 to 23.9 bits/sample, or n = 24-9600 kbits/second
(kbps), not available with DSD audio
--blocksize=n
specify block size in samples (max = 131072 and min = 16 with --merge-blocks,
otherwise 128)
-c
create correction file (.wvc) for hybrid mode (results in 2-file lossless compression)
-cc
maximum hybrid compression (hurts lossy quality & decode speed)
--channel-order=list
specify (comma separated) channel order if not Microsoft standard (which is
FL,FR,FC,LFE,BL,BR,FLC,FRC,BC,SL,SR,TC,TFL,TFC,TFR,TBL,TBC,TBR); specify “...” to
indicate that channels are not assigned to specific speakers, or terminate list with
“...” to indicate that any channels beyond those specified are unassigned
--cross-decorr
use cross-channel correlation in hybrid mode (on by default in lossless mode and with
-cc option)
-d
delete source file if successful (use with caution!)
-f
fast mode (fast, but some compromise in compression ratio)
--force-even-byte-depth
round the bit depth specified in the source file up to the next even byte (e.g.,
20-bit is rounded up to 24-bit) to handle cases where the value specified is not
correct (i.e., padding bits are non-zero)
-g
general/normal mode, cancels previously specified -f and -h options
-h
high quality (better compression ratio, but slightly slower encode and decode than
normal mode)
-hh
very high quality (best compression, but slowest and NOT recommended for use on
vintage playback devices)
--help
display extended help
-i
ignore length in wav header and allow WAV files greater than 4 GB (note that this will
attempt to fix the WAV header stored in the WavPack file, combine with -r to create a
fresh header instead)
--import-id3
import applicable tag items from ID3v2.3 tag present in DSF (and other) files into
APEv2 tag (if there are > 1 MB cover images present add --allow-huge-tags to include
them, and -r if you do not want large images appearing twice in the WavPack file,
although this will remove the entire original ID3v2 tag)
-jn
joint-stereo override (0 = left/right, 1 = mid/side)
-m
compute & store MD5 signature of raw audio data
--merge-blocks
merge consecutive blocks with equal redundancy (used with --blocksize option and is
useful for files generated by the lossyWAV program or decoded HDCD files)
-n
calculate average and peak quantization noise (hybrid only, reference fullscale sine)
--no-overwrite
never overwrite, nor ask to overwrite, an existing file (this is handy for resuming a
cancelled batch operation and obviously cannot be mixed with -y)
--no-utf8-convert
don't recode passed tags from local encoding to UTF-8, assume they are in UTF-8
already
-o OUTFILE
specify output filename (only if single source file) or target directory (must exist)
--pair-unassigned-chans
encode unassigned channels into stereo pairs
--pre-quantize=bits
pre-quantize samples to bits depth BEFORE encoding and MD5 calculation (common use
would be --pre-quantize=20 for 24-bit or float material recorded with typical
converters)
-q
quiet (keep console output to a minimum)
-r
parse headers to determine audio format and length but do not store the headers in the
resulting WavPack file (a minimum header will be generated by wvunpack, but some
non-audio metadata might be lost)
--raw-pcm
input data is raw pcm (44,100 Hz, 16-bit, 2-channels)
--raw-pcm=sr,bits[f|s|u],chans,[le|be]
input data is raw pcm with specified sample-rate, bit-depth (float,unsigned,signed),
number of channels, and endianness (defaulted parameters may be omitted, specify
bits=1 for DSD)
--raw-pcm-skip=begin[,end]
skip begin bytes before encoding raw PCM (header) and skip end bytes at the EOF
(trailer)
-sn
override default hybrid mode noise shaping where n is a float value between -1.0 and
1.0; negative values move noise lower in freq, positive values move noise higher in
freq, use 0 for no shaping (white noise)
-t
copy input file's time stamp to output file(s)
--use-dns
force use of dynamic noise shaping (hybrid mode only)
-v
verify output file integrity after write (not for piped output)
--version
write program version to stdout
-w Encoder
write actual encoder metadata to APEv2 tag (e.g., “Encoder=WavPack 5.5.0”)
-w Settings
write actual user settings metadata to APEv2 tag (e.g., “Settings=-hb384cx3”)
-w “Field=Value”
write specified text metadata to APEv2 tag
-w “Field=@file.ext”
write specified text metadata from file to APEv2 tag, normally used for embedded
cuesheets and logs (field names “Cuesheet” and “Log”)
--write-binary-tag “Field=@file.ext”
write the specified binary metadata file to APEv2 tag, normally used for cover art
with the specified field name “Cover Art (Front)”
-x[n]
extra encode processing (optional n = 0 to 6, 1=default), -x0 for no extra processing,
-x1 to -x3 to choose best of predefined filters, -x4 to -x6 to generate custom filters
(very slow!)
-y
yes to all warnings (use with caution!)
-z[n]
don't set (n = 0 or omitted) or set (n = 1) console title to indicate progress (leaves
"WavPack Completed")
SEE ALSO
wvunpack(1), wvgain(1), wvtag(1)
Please visit www.wavpack.com for more information
COPYRIGHT
This manual page was written by Sebastian Dröge <slomo@debian.org> and David Bryant
<david@wavpack.com>. Permission is granted to copy, distribute and/or modify this document
under the terms of the BSD License.
AUTHORS
Sebastian Dröge <slomo@debian.org>
Original author
David Bryant <david@wavpack.com>
Updates
COPYRIGHT
Copyright © 2005 Sebastian Dröge
Copyright © 2022 David Bryant