Provided by: wimtools_1.14.2-1_amd64 
NAME
wimapply - Apply a WIM image
SYNOPSIS
wimapply WIMFILE [IMAGE] TARGET [OPTION...]
DESCRIPTION
wimapply, or equivalently wimlib-imagex apply, extracts ("applies") an image, or all
images, from the Windows Imaging (WIM) archive WIMFILE.
IMAGE specifies the image in WIMFILE to extract. It may be the 1-based index of an image,
the name of an image, or the keyword "all" to specify all images. It may be omitted if
WIMFILE contains only one image. You can use wiminfo(1) to list the images contained in
WIMFILE.
TARGET specifies where to extract the image(s) to. If TARGET is a directory, then the
image(s) will be extracted to that directory as per DIRECTORY EXTRACTION (UNIX) or
DIRECTORY EXTRACTION (WINDOWS). If TARGET does not exist, then a directory will be
created there first. Alternatively, if TARGET specifies a UNIX block device, then the
image will be extracted to it as described in NTFS VOLUME EXTRACTION (UNIX).
Note that wimapply is designed to extract, or "apply", full WIM images. If you instead
want to extract only certain files or directories from a WIM image, use wimextract(1)
instead.
If IMAGE is "all", then all images in WIMFILE will be extracted into subdirectories of
TARGET named after the images, falling back to the image index when an image has no name
or an unusual name. This is not yet supported in NTFS VOLUME EXTRACTION (UNIX) mode.
If WIMFILE is "-", then the WIM is read from standard input rather than from disk. See
PIPABLE WIMS for more information.
DIRECTORY EXTRACTION (UNIX)
On UNIX-like systems, a WIM image may be extracted to a directory. This mode has the
limitation that NTFS or Windows-specific metadata will not be extracted. Although some
concepts such as hard links, symbolic links, last access timestamps, and last modification
timestamps will be translated to their UNIX equivalents, other metadata will be lost (with
warnings given). Notably, the following types of metadata will not be extracted in this
mode:
• Windows file attribute flags
• Windows security descriptors (e.g. file owners and DACLs)
• File creation timestamps
• Reparse points other than symbolic links and junction points
• Named data streams
• Short filenames (also known as 8.3 names or DOS names).
• Object IDs
These same limitations apply to wimextract. As such, this mode is most useful in
situations where NTFS or Windows-specific metadata is unimportant, e.g. when wanting to
extract specific files, or when doing file archiving only on UNIX-like systems, possibly
in combination with --unix-data. When Windows-specific metadata is important, then either
the NTFS VOLUME EXTRACTION (UNIX) mode should be used, or the Windows version of wimlib
should be used (see DIRECTORY EXTRACTION (WINDOWS)).
NTFS VOLUME EXTRACTION (UNIX)
On UNIX-like systems, TARGET may also be specified as a block device (e.g. /dev/sda3)
containing an unmounted NTFS volume. In this mode, wimapply uses libntfs-3g to apply the
specified WIM image to the root directory of the NTFS volume. The target volume should be
empty, e.g. newly created by mkntfs(8). In this mode, NTFS-specific and Windows-specific
data and metadata will be extracted, including the following:
• All data streams of all files except encrypted files, including the unnamed data
stream as well as all named data streams.
• Reparse points, including symbolic links, junction points, and other reparse points.
• File and directory creation, access, and modification timestamps, using the native
NTFS resolution of 100 nanoseconds.
• Windows security descriptors, including all components (owner, group, DACL, and SACL).
• Windows file attribute flags
• All names of all files, including names in the Win32 namespace, DOS namespace,
Win32+DOS namespace, and POSIX namespace. This includes hard links.
• Object IDs.
However, encrypted files will not be extracted.
Restoring extended attributes (EAs) is also not yet supported in this mode.
Regardless, since almost all information from the WIM image is restored in this mode, it
is possible (and fully supported) to restore an image of an actual Windows installation
using wimapply on a UNIX-like system as an alternative to using wimapply or DISM on
Windows. In the EXAMPLES section below, there is an example of applying an image from an
"install.wim" file as may be found in the Windows installation media.
Note that to actually boot Windows (Vista or later) from an applied "install.wim" image,
you also need to mark the partition as "bootable" and set up various boot files, such as
\BOOTMGR and \BOOT\BCD. The latter task is most easily accomplished by running
bcdboot.exe from a live Windows system such as Windows PE, but there are other options as
well.
Finally, note that this mode uses libntfs-3g directly, without going through the
ntfs-3g(8) driver. Hence, there is no special support for applying a WIM image to a
directory on which an NTFS filesystem has been mounted using ntfs-3g(8); you have to
unmount it first. There is also no support for applying a WIM image to some subdirectory
of the NTFS volume; you can only apply to the root directory.
DIRECTORY EXTRACTION (WINDOWS)
On Windows, wimapply (and wimextract) natively support NTFS and Windows-specific metadata.
For best results, the target directory should be located on an NTFS volume and the program
should be run with Administrator privileges; however, non-NTFS filesystems and running
without Administrator privileges are also supported, subject to limitations.
On Windows, wimapply tries to extract as much data and metadata as possible, including:
• All data streams of all files. This includes the default file contents, as well as
named data streams if supported by the target volume.
• Reparse points, including symbolic links, junction points, and other reparse points,
if supported by the target volume. Restoring symlinks requires Administrator
privileges. Also see --rpfix and --norpfix for details on how absolute symbolic links
and junctions are extracted.
• File and directory creation, access, and modification timestamps, to the highest
resolution supported by the target volume.
• Security descriptors, if supported by the filesystem and --no-acls is not specified.
Note that this, in general, requires Administrator privileges, and may be only
partially successful if the program is run without Administrator privileges (see
--strict-acls).
• File attribute flags, including hidden, compressed, encrypted, sparse, etc, when
supported by the filesystem.
• Short filenames (also known as 8.3 names or DOS names).
• Hard links, if supported by the target filesystem.
• Object IDs, if supported by the target filesystem.
• Extended attributes (EAs), if supported by the target filesystem.
Additional notes about extracting files on Windows:
• wimapply will issue warnings if unable to extract the exact metadata and data of the
WIM image due to limitations of the target filesystem.
• Since encrypted files (with FILE_ATTRIBUTE_ENCRYPTED) are not stored in plaintext in
the WIM image, wimapply cannot restore encrypted files to filesystems not supporting
encryption. Therefore, on such filesystems, encrypted files will not be extracted.
Furthermore, even if encrypted files are restored to a filesystem that supports
encryption, they will only be decryptable if the decryption key is available.
• Files with names that cannot be represented on Windows will not be extracted by
default; see --include-invalid-names.
• Files with full paths over 260 characters (the so-called MAX_PATH) will be extracted,
but beware that such files will be inaccessible to most Windows software and may not
be able to be deleted easily.
• On Windows, unless the --no-acls option is specified, wimlib will attempt to restore
files' security descriptors exactly as they are provided in the WIM image. Beware
that typical Windows installations contain files whose security descriptors do not
allow the Administrator to delete them. Therefore, such files will not be able to be
deleted, or in some cases even read, after extracting, unless processed with a
specialized program that knows to acquire the SE_RESTORE_NAME and/or SE_BACKUP_NAME
privileges which allow overriding access control lists. This is not a bug in wimlib,
which works as designed to correctly restore the data that was archived, but rather a
problem with the access rights Windows uses on certain files. But if you just want
the file data and don't care about security descriptors, use --no-acls to skip
restoring all security descriptors.
• A similar caveat to the above applies to file attributes such as Readonly, Hidden, and
System. By design, on Windows wimlib will restore such file attributes; therefore,
extracted files may have those attributes. If this is not what you want, use the
--no-attributes option.
SPLIT WIMS
You may use wimapply to apply images from a split WIM, or wimextract to extract files from
a split WIM. The WIMFILE argument must specify the first part of the split WIM, while the
additional parts of the split WIM must be specified in one or more --ref="GLOB" options.
Since globbing is built into the --ref option, typically only one --ref option is
necessary. For example, the names for the split WIM parts usually go something like:
mywim.swm
mywim2.swm
mywim3.swm
mywim4.swm
mywim5.swm
To apply the first image of this split WIM to the directory "dir", run:
wimapply mywim.swm 1 dir --ref="mywim*.swm"
PIPABLE WIMS
wimapply also supports applying a WIM from a nonseekable file, such as a pipe, provided
that the WIM was captured in the wimlib-specific pipable format using --pipable (see
wimcapture(1)). To use standard input as the WIM, specify "-" as WIMFILE. A possible use
of this feature is to apply a WIM image being streamed from the network. For example, to
apply the first image from a WIM file available on a HTTP server to an NTFS volume on
/dev/sda1, run something like:
wget -O - https://myserver/mywim.wim | wimapply - 1 /dev/sda1
Pipable WIMs may also be split into multiple parts, just like normal WIMs. To apply a
split pipable WIM from a pipe, the parts must be concatenated and all written to the pipe.
The first part must be sent first, but the remaining parts may be sent in any order.
OPTIONS
--check
Before applying the image, verify the integrity of WIMFILE if it has extra integrity
information.
--ref="GLOB"
File glob of additional WIMs or split WIM parts to reference resources from. See
SPLIT_WIMS. This option can be specified multiple times. Note: GLOB is listed in
quotes because it is interpreted by wimapply and may need to be quoted to protect
against shell expansion.
--rpfix, --norpfix
Set whether to fix targets of absolute symbolic links (reparse points in Windows
terminology) or not. When enabled (--rpfix), extracted absolute symbolic links that
are marked in the WIM image as being fixed are assumed to have absolute targets
relative to the image root, and therefore wimapply prepends the absolute path to the
extraction target directory to their targets. The intention is that you can apply
an image containing absolute symbolic links and still have them be valid after it
has been applied to any location.
The default behavior is --rpfix if any images in WIMFILE have been captured with
reparse-point fixups done. Otherwise, it is --norpfix.
Reparse point fixups are never done in the NTFS volume extraction mode on UNIX-like
systems.
--unix-data
(UNIX-like systems only) Restore UNIX-specific metadata and special files that were
captured by wimcapture with the --unix-data option. This includes: standard UNIX
file permissions (owner, group, and mode); device nodes, named pipes, and sockets;
and extended attributes (Linux-only).
--no-acls
Do not restore security descriptors on extracted files and directories.
--strict-acls
Fail immediately if the full security descriptor of any file or directory cannot be
set exactly as specified in the WIM file. If this option is not specified, when
wimapply on Windows does not have permission to set a security descriptor on an
extracted file, it falls back to setting it only partially (e.g. with SACL omitted),
and in the worst case omits it entirely. However, this should only be a problem
when running wimapply without Administrator rights. Also, on UNIX-like systems,
this flag can also be combined with --unix-data to cause wimapply to issue an error
if UNIX permissions are unable to be applied to an extracted file.
--no-attributes
Do not restore Windows file attributes such as readonly, hidden, etc.
--include-invalid-names
Extract files and directories with invalid names by replacing characters and
appending a suffix rather than ignoring them. Exactly what is considered an
"invalid" name is platform-dependent.
On POSIX-compliant systems, filenames are case-sensitive and may contain any byte
except '\0' and ´/', so on a POSIX-compliant system this option will only have an
effect in the unlikely case that the WIM image for some reason has a filename
containing one of these characters.
On Windows, filenames are case-insensitive(*), cannot include control characters,
and cannot include the characters '/', ´\0', '\', ':', '*', '?', ´"', '<', '>', or
'|'. Ordinarily, files in WIM images should meet these conditions as well. However,
it is not guaranteed, and in particular a WIM image captured with wimcapture on a
POSIX-compliant system could contain such files. By default, invalid names will be
ignored, and if there are multiple names differing only in case, one will be chosen
to extract arbitrarily; however, with --include-invalid-names, all names will be
sanitized and extracted in some form.
(*) Unless the ObCaseInsensitive setting has been set to 0 in the Windows registry,
in which case certain software, including the Windows version of wimapply, will
honor case-sensitive filenames on NTFS and other compatible filesystems.
--wimboot
Windows only: Instead of extracting the files themselves, extract "pointer files"
back to the WIM archive(s). This can result in significant space savings. However,
it comes at several potential costs, such as not being able to delete the WIM
archive(s) and possibly having slower access to files. See Microsoft's
documentation for "WIMBoot" for more information.
If it exists, the [PrepopulateList] section of the file
\Windows\System32\WimBootCompress.ini in the WIM image will be read. Files matching
any of these patterns will be extracted normally, not as WIMBoot "pointer files".
This is helpful for certain files that Windows needs to read early in the boot
process.
This option only works when the program is run as an Administrator and the target
volume is NTFS or another filesystem that supports reparse points.
In addition, this option works best when running on Windows 8.1 Update 1 or later,
since that is the first version of Windows that contains the Windows Overlay
Filesystem filter driver ("WOF"). If the WOF driver is detected, wimlib will create
the WIMBoot "pointer files" using documented ioctls provided by WOF.
Otherwise, if the WOF driver is not detected, wimlib will create the reparse points
and edit the file "\System Volume Information\WimOverlay.dat" on the target volume
manually. This is potentially subject to problems, since although the code works in
certain tested cases, neither of these data formats is actually documented by
Microsoft. Before overwriting this file, wimlib will save the previous version in
"\System Volume Information\WimOverlay.wimlib_backup", which you potentially could
restore if you needed to.
You actually can still do a --wimboot extraction even if the WIM image is not marked
as "WIMBoot-compatible". This option causes the extracted files to be set as
"externally backed" by the WIM file. Microsoft's driver which implements this
"external backing" functionality seemingly does not care whether the image(s) in the
WIM are really marked as WIMBoot-compatible. Therefore, the "WIMBoot-compatible"
tag (<WIMBOOT> in the XML data) seems to be a marker for intent only. In addition,
the Microsoft driver can externally back files from WIM files that use XPRESS chunks
of size 8192, 16384, and 32768, or LZX chunks of size 32768, in addition to the
default XPRESS chunks of size 4096 that are created when wimcapture is run with the
--wimboot option.
--compact=FORMAT
Windows-only: compress the extracted files using System Compression, when possible.
This only works on either Windows 10 or later, or on an older Windows to which
Microsoft's wofadk.sys driver has been added. Several different compression formats
may be used with System Compression, and one must be specified as FORMAT. The
choices are: xpress4k, xpress8k, xpress16k, and lzx.
Exclusions are handled in the same way as with the --wimboot option. That is: if it
exists, the [PrepopulateList] section of the file
\Windows\System32\WimBootCompress.ini in the WIM image will be read, and files
matching any of the patterns in this section will not be compressed. In addition,
wimlib has a hardcoded list of files for which it knows, for compatibility with the
Windows bootloader, to override the requested compression format.
--recover-data
If a file is corrupted (its stored hash doesn't match its actual hash, or some parts
of it can't be decompressed), extract the corrupted file anyway with a warning,
rather than aborting with an error. This may be useful to recover data if a WIM
archive was corrupted. Note that recovering data is not guaranteed to succeed, as
it depends on the type of corruption that occurred.
NOTES
Data integrity: WIM files include checksums of file data. To detect accidental (non-
malicious) data corruption, wimlib calculates the checksum of every file it extracts and
issues an error if it does not have the expected value, unless the --recover-data option
is given. (This default behavior seems equivalent to the /verify option of ImageX.) In
addition, a WIM file can include an integrity table (extra checksums) over the raw data of
the entire WIM file. For performance reasons wimlib does not check the integrity table by
default, but the --check option can be passed to make it do so.
ESD files: wimlib can extract files from solid-compressed WIMs, or "ESD" (.esd) files,
just like from normal WIM (.wim) files. However, Microsoft sometimes distributes ESD
files with encrypted segments; wimlib cannot extract such files until they are first
decrypted.
Security: wimlib has been carefully written to validate all input and is believed to be
secure against some types of attacks which often plague other file archiving programs,
e.g. directory traversal attacks (which, as it happens, Microsoft's WIM software is
vulnerable to). Important parts of wimlib, e.g. the decompressors, have also been fuzz
tested. However, wimlib is not currently designed to protect against some types of
denial-of-service (DOS) attacks, e.g. memory exhaustion or "zip bombs".
EXAMPLES
Extract the first image from the Windows PE WIM on the Windows installation media to the
directory "boot":
wimapply /mnt/windows/sources/boot.wim 1 boot
On Windows, apply an image of an entire volume, for example from "install.wim" which can
be found on the Windows installation media:
wimapply install.wim 1 E:\
Same as above, but running on a UNIX-like system where the corresponding partition is
/dev/sda2:
wimapply install.wim 1 /dev/sda2
Note that before running either of the above commands, an NTFS filesystem may need to be
created on the partition, for example with format.exe on Windows or mkntfs(8) on UNIX-like
systems. For example, on UNIX you might run:
mkntfs /dev/sda2 && wimapply install.wim 1 /dev/sda2
(Of course don't do that if you don't want to destroy all existing data on the partition!)
See SPLIT WIMS and PIPABLE WIMS for examples of applying split and pipable WIMs,
respectively.
SEE ALSO
wimlib-imagex(1) wimcapture(1) wimextract(1) wiminfo(1)