Provided by: libdevice-gsm-perl_1.61-3_all 
NAME
Device::Gsm - Perl extension to interface GSM phones / modems
SYNOPSIS
use Device::Gsm;
my $gsm = new Device::Gsm( port => '/dev/ttyS1', pin => 'xxxx' );
if( $gsm->connect() ) {
print "connected!\n";
} else {
print "sorry, no connection with gsm phone on serial port!\n";
}
# Register to GSM network (you must supply PIN number in above new() call)
# See 'assume_registered' in the new() method documentation
$gsm->register();
# Send quickly a short text message
$gsm->send_sms(
recipient => '+3934910203040',
content => 'Hello world! from Device::Gsm'
);
# Get list of Device::Gsm::Sms message objects
# see `examples/read_messages.pl' for all the details
my @messages = $gsm->messages();
DESCRIPTION
"Device::Gsm" class implements basic GSM functions, network registration and SMS sending.
This class supports also "PDU" mode to send "SMS" messages, and should be fairly usable.
In the past, I have developed and tested it under Linux RedHat 7.1 with a 16550 serial
port and Siemens C35i/C45 GSM phones attached with a Siemens-compatible serial cable.
After some years, I have developed and tested it with Linux Slackware 10.2 and a Cambridge
Silicon Radio (CSR) USB bluetooth dongle, connecting to a Nokia 6600 phone.
Currently I don't use this software anymore. It should probably still work, but it's
unlikely I will ever be able to test it with a real gsm module.
Feel free to contact me if you have any trouble or you are interested in improving this
software.
If you need a way to test your gsm module or phone, and you don't mind spending an SMS,
use the "examples/send_to_cosimo.pl" script to notify me that "Device::Gsm" still works
and works well with your device (thanks!).
Over the years, I have collected hundreds of messages from all over the world :-)
WHY?
Why would you want to use this?
When I started writing this software, around year 2000, I needed a practical way to
automatically send tens of SMS messages through my phone.
Fast forward to 2016, I barely use SMS messages anymore, and you can find plenty of TCP/IP
based services to send SMS messages, maybe even for free.
The only motivation left would be to learn how AT commands work for GSM modules. I had
lots of fun learning this, but it was so many years ago, and YMMV, as they say.
METHODS
The following documents all supported methods with simple examples of usage.
new()
Inherited from Device::Modem. See Device::Modem documentation for more details.
The only mandatory argument is the "port" you want to use to connect to the GSM device:
my $gsm = Device::Gsm->new(
port => '/dev/ttyS0',
);
On some phones, you may experience problems in the GSM network registration step. For this
reasons, you can pass a special "assume_registered" option to have Device::Gsm ignore the
registration step and assume the device is already registered on the GSM network. Example:
my $gsm = Device::Gsm->new(
port => '/dev/ttyS0',
assume_registered => 1,
);
If you want to send debugging information to your own log file instead of the default
setting, you can:
my $gsm = Device::Gsm->new(
port => '/dev/ttyS1',
log => 'file,/tmp/myfile.log',
loglevel => 'debug', # default is 'warning'
);
connect()
This is the main call that connects to the appropriate device. After the connection has
been established, you can start issuing commands. The list of accepted parameters (to be
specified as hash keys and values) is the same of "Device::SerialPort" (or
"Win32::SerialPort" on Windows platform), as all parameters are passed to those classes'
connect() method.
The default value for "baudrate" parameter is 19200.
Example:
my $gsm = Device::Gsm->new( port=>'/dev/ttyS0', log=>'syslog' );
# ...
if( $gsm->connect(baudrate => 19200) ) {
print "Connected!";
} else {
print "Could not connect, sorry!";
}
# ...
datetime()
Used to get or set your phone/gsm modem date and time.
If called without parameters, it gets the current phone/gsm date and time in "gsm" format,
"YY/MM/DD,HH:MN:SS". For example "03/12/15,22:48:59" means December the 15th, at 10:48:59
PM. Example:
$datestr = $gsm->datetime();
If called with parameters, sets the current phone/gsm date and time to that of supplied
value. Example:
$newdate = $gsm->datetime( time() );
where "time()" is the perl's builtin "time()" function (see "perldoc -f time" for
details). Another variant allows one to pass a "localtime" array to set the correspondent
datetime. Example:
$newdate = $gsm->datetime( localtime() );
(Note the list context). Again you can read the details for "localtime" function with
"perldoc -f localtime".
If your device does not support this command, an undefined value will be returned in
either case.
delete_sms()
This method deletes a message from your SIM card, given the message index number.
Example:
$gsm->delete_sms(3);
An optional second parameter specifies the "storage". It allows one to delete messages
from gsm phone memory or sim card memory. Example:
# Deletes first message from gsm phone memory
$gsm->delete_sms(1, 'ME');
# Deletes 3rd message from sim card
$gsm->delete_sms(3, 'SM');
By default, it uses the currently set storage, via the "storage()" method.
forward()
Sets call forwarding. Accepts three arguments: reason, mode and number. Reason can be the
string "unconditional", "busy", "no reply" and "unreachable". Mode can be the string
"disable", "enable", "query", "register", "erase".
Example:
# Set unconditional call forwarding to +47 123456789
$gsm->forward('unconditional','register','+47123456789');
# Erase unconditional call forwarding
$gsm->forward('unconditional','erase');
hangup()
Hangs up the phone, terminating the active calls, if any. This method has been never
tested on real "live" conditions, but it needs to be specialized for GSM phones, because
it relies on "+HUP" GSM command. Example:
$gsm->hangup();
imei()
Returns the device own IMEI number (International Mobile Station Equipment Identity).
This identifier is numeric and is supposed to be unique among all GSM mobile devices and
phones. Example:
my $imei = $gsm->imei();
manufacturer()
Returns the device manufacturer, usually only the first word (example: "Nokia", "Siemens",
"Falcom", ...). Example:
my $man_name = $gsm->manufacturer();
if( $man_name eq 'Nokia' ) {
print "We have a nokia phone...";
} else {
print "We have a $man_name phone...";
}
messages()
This method is a somewhat unstable and subject to change, but for now it seems to work. It
is meant to extract all text SMS messages stored on your SIM card or gsm phone. In list
context, it returns a list of messages (or undefined value if no message or errors), every
message being a "Device::Gsm::Sms" object.
The only parameter specifies the "storage" where you want to read the messages, and can
assume some of the following values (but check your phone/modem manual for special
manufacturer values):
"ME"
Means gsm phone MEmory
"MT"
Means gsm phone MEmory on Nokia phones?
"SM"
Means Sim card Memory (default value)
Example:
my $gsm = Device::Gsm->new();
$gsm->connect(port=>'/dev/ttyS0') or die "Can't connect!";
for( $gsm->messages('SM') )
{
print $_->sender(), ': ', $_->content(), "\n";
}
mode()
Sets the device GSM command mode. Accepts one parameter to set the new mode that can be
the string "text" or "pdu". Example:
# Set text mode
$gsm->mode('text');
# Set pdu mode
$gsm->mode('pdu');
model()
Returns phone/device model name or number. Example:
my $model = $gsm->model();
For example, for Siemens C45, $model holds "C45"; for Nokia 6600, $model holds 6600.
network()
Returns the current registered or preferred GSM network operator. Example:
my $net_name = $gsm->network();
# Returns 'Wind Telecom Spa'
my($net_name, $net_code) = $gsm->network();
# Returns ('Wind Telecom Spa', '222 88')
This obviously varies depending on country and network operator. For me now, it holds
"Wind Telecomunicazioni SpA". It is not guaranteed that the mobile phone returns the
decoded network name. It can also return a gsm network code, like "222 88". In this case,
an attempt to decode the network name is made.
Be sure to call the "network()" method when already registered to gsm network. See
"register()" method.
signal_quality()
Returns the measure of signal quality expressed in dBm units, where near to zero is
better. An example value is -91 dBm, and reported value is "-91". Values should range
from -113 to -51 dBm, where -113 is the minimum signal quality and -51 is the theoretical
maximum quality.
my $level = $gsm->signal_quality();
If signal quality can't be read or your device does not support this command, an undefined
value will be returned.
software_version()
Returns the device firmware version, as stored by the manufacturer. Example:
my $rev = $gsm->software_revision();
For example, for my Siemens C45, $rev holds 06.
storage()
Allows getting/setting the current sms storage, that is where the sms messages are saved,
either the sim card or gsm phone memory. Phones/modems that do not support this feature
(implemented by "+CPMS" AT command won't be affected by this method.
my @msg;
my $storage = $gsm->storage();
print "Current storage is $storage\n";
# Read all messages on sim card
$gsm->storage('SM');
@msg = $gsm->messages();
# Read messages from gsm phone memory
$gsm->storage('ME');
push @msg, $gsm->messages();
test_command()
This method queries the device to know if a specific AT GSM command is supported. This is
used only with GSM commands (those with "AT+" prefix). For example, if I want to know if
my device supports the "AT+GXXX" command:
my $gsm = Device::Gsm->new( port => '/dev/myport' );
...
if( $gsm->test_command('GXXX') ) {
# Ok, command is supported
} else {
# Nope, no GXXX command
}
Note that if you omit the starting "+" character, it is automatically added. You can also
test commands like "^SNBR" or the like, without "+" char being added.
This method caches the results of the test to use in future tests (at least until the next
"connect()" or "disconnect()" is executed).
register()
"Registering" on the GSM network is what happens when you turn on your mobile phone or GSM
equipment and the device tries to reach the GSM operator network. If your device requires
a PIN number, it is used here (but remember to supply the "pin" parameter in new() object
constructor for this to work.
Registration can take some seconds, don't worry for the wait. After that, you are ready
to send your SMS messages or do some voice calls. Normally you don't need to call
register() explicitly because it is done automatically for you when/if needed.
If return value is true, registration was successful, otherwise there is something wrong;
probably you supplied the wrong PIN code or network unreachable.
send_sms()
Obviously, this sends out SMS text messages. I should warn you that you cannot send (for
now) MMS, ringtone, smart, ota messages of any kind with this method.
Send out an SMS message quickly:
my $sent = $gsm->send_sms(
content => 'Hello, world!', # SMS text
recipient => '+99000123456', # recipient phone number
);
if( $sent ) {
print "OK!";
} else {
print "Troubles...";
}
The allowed parameters to send_sms() are:
"class"
Class parameter can assume two values: "normal" and "flash". Flash (or class zero)
messages are particular because they are immediately displayed (without user confirm)
and never stored on phone memory, while "normal" is the default.
"content"
This is the text you want to send, consisting of max 160 chars if you use PDU mode and
140 (?) if in text mode (more on this later).
"mode"
Can assume two values (case insensitive): "pdu" and "text". "PDU" means Protocol Data
Unit and it is a sort of binary encoding of commands, to save time/space, while "text"
is the normal GSM commands text mode.
Recent mobile phones and GSM equipment surely have support for "PDU" mode. Older OEM
modules (like Falcom Swing, for example) don't have PDU mode, but only text mode. It
is just a matter of trying.
"recipient"
Phone number of message recipient
"status_report"
If present with a true value, it enables sending of SMS messages (only for PDU mode,
text mode SMS won't be influenced by this parameter) with the status report, also
known as delivery report, that is a short message that reports the status of your sent
message. Usually this is only available if your mobile company supports this feature,
and probably you will be charged a small amount for this service.
More information on this would be welcome.
service_center()
If called without parameters, returns the actual SMS Service Center phone number. This is
the number your phone automatically calls when receiving and sending SMS text messages,
and your network operator should tell you what this number is.
Example:
my $gsm = Device::Gsm->new( port => 'COM1' );
$gsm->connect() or die "Can't connect";
$srv_cnt = $gsm->service_center();
print "My service center number is: $srv_cnt\n";
If you want to set or change this number (if used improperly this can disable sending of
SMS messages, so be warned!), you can try something like:
my $ok = $gsm->service_center('+99001234567');
print "Service center changed!\n" if $ok;
REQUIRES
• Device::Modem, which in turn requires
• Device::SerialPort (or Win32::SerialPort on Windows machines)
EXPORT
None
TROUBLESHOOTING
If you experience problems, please double check:
Device permissions
Maybe you don't have necessary permissions to access your serial, irda or bluetooth
port device. Try executing your script as root, or try, if you don't mind, "chmod a+rw
/dev/ttyS1" (or whatever device you use instead of "/dev/ttyS1").
Connection speed
Try switching "baudrate" parameter from 19200 (the default value) to 9600 or
viceversa. This one is the responsible of 80% of the problems, because there is no
baudrate auto-detection.
Device autoscan
If all else fails, please use the autoscan utility in the "bin/" folder of the
"Device::Gsm" distribution. Try running this autoscan utility and examine the log file
produced in the current directory.
If you lose any hope, send me this log file so I can eventually have any clue about
the problem / failure.
Also this is a profiling tool, to know which commands are supported by your device, so
please send me profiles of your devices, so I can add better support for all devices
in the future!
TO-DO
Spooler
Build a simple spooler program that sends all SMS stored in a special queue (that
could be a simple filesystem folder).
Validity Period
Support "validity" period option on SMS sending. Tells how much time the SMS Service
Center must hold the SMS for delivery when not received.
AUTHOR
Cosimo Streppone, cosimo@cpan.org
SEE ALSO
Device::Modem, Device::SerialPort, Win32::SerialPort, perl(1)