Provided by: liblog-agent-perl_1.005-2_all 
NAME
Log::Agent - logging agent
SYNOPSIS
use Log::Agent; # in all reusable components
logerr "error";
logtrc "notice:12", "notice that" if ...;
logdie "log and die";
use Log::Agent; # in application's main
logconfig(-prefix => $0); # simplest, uses default driver
use Log::Agent; # another more complex example
require Log::Agent::Driver::File; # logging made to file
logconfig(-driver =>
Log::Agent::Driver::File->make(
-prefix => $0,
-showpid => 1,
-channels => {
'error' => "$0.err",
'output' => "$0.out",
'debug' => "$0.dbg",
},
)
);
DESCRIPTION
The "Log::Agent" module provides an abstract layer for logging and tracing, which is
independent from the actual method used to physically perform those activities. It acts as
an agent (hence the name) that collects the requests and delegates processing to a
sublayer: the logging driver.
The "Log::Agent" module is meant to be used in all reusable components, since they cannot
know in advance how the application which ends up using them will perform its logging
activities: either by emitting messages on stdout and errors on stderr, or by directing
messages to logfiles, or by using syslog(3).
The logging interface is common for all the logging drivers, and is therefore the result
of a compromise between many logging schemes: any information given at this level must be
either handled by all drivers, or may be ignored depending on the application's final
choice.
PRIORITIES AND LEVEL
The "Log::Agent" module can use both priorities (as defined by syslog(3)) or logging
levels, or either, in which case there is an implicit computation of the missing item
(i.e. the level 4, for instance, corresponds to the "warning" priority, and vice-versa).
See Log::Agent::Priorities for more details.
A logging level is defined as being a threshold: any level lesser than or equal to that
threshold will be logged.
At the "Log::Agent" level, it is possible to define a trace level and a debug level. Only
the messages below those levels (inclusive) will be handed out to the underlying driver
for logging. They are used by the logtrc() and logdbg() routines, respectively.
CHANNELS
The "Log::Agent" class defines three logging channels, which are "error", "output" and
"debug". Depending on the driver used for logging, those channels are ignored (typically
with syslog()) or may be implicitly defined (default logging, i.e. the one achieved by the
"Log::Agent::Driver::Default" driver, remaps "error" and "debug" to stderr, "output" to
stdout).
INTERFACE
Anywhere a message is expected, it can be a single string, or a printf()-like format
string followed by the required arguments. The special macro %m is handled directly by
"Log::Agent" and is replaced by the string version of $!, which is the last error message
returned by the last failing system call.
NOTE: There should not be any trailing "\n" in the message strings, nor any embededed one,
although this is not enforced. Remember that the main purpose of "Log::Agent" is to
specify logging messages in a standard way! Therefore, most of the time, a "should"
should be read as "must" and "should not" as "must not", which is the strongest
interdiction form available in English, as far as I know.
Here are valid message examples:
"started since $time"
"started since %s", $time
"fork: %m"
The following logging interface is made available to modules:
logdbg priority, message
Debug logging of message to the "debug" channel.
You may specify any priority you want, i.e. a "debug" priority is not enforced here.
You may even specify "notice:4" if you wish, to have the message logged if the debug
level is set to 4 or less. If handed over to syslog(3), the message will nonetheless
be logged at the "notice" priority.
logtrc priority, message
Trace logging of message to the "output" channel.
Like logdbg() above, you are not restricted to the "info" priority. This routine
checks the logging level (either explicit as in "info:14" or implicit as in "notice")
against the trace level.
logdebug message
Log the message at the "debug" priority to the "output" channel.
The difference with logdbg() is twofold: logging is done on the "output" channel, not
the "debug" one, and the priority is implicit.
loginfo message
Log the message at the "info" priority to the "output" channel.
logsay message
Log the message at the "notice" priority to the "output" channel. The logging always
takes place under the default "-trace" settings, but only if the routine is called,
naturally. This means you can still say:
logsay "some trace message" if $verbose;
and control whether the message is emitted by using some external configuration for
your module (e.g. by adding a -verbose flag to the creation routine of your class).
logwarn message
Log a warning message at the "warning" priority to the "error" channel.
logcarp message
Same as logwarn(), but issues a Carp::carp(3) call instead, which will warn from the
perspective of the routine's caller.
logcluck message
Same as logwarn(), but dumps a full stacktrace as well.
logerr message
Log an error message at the "error" priority to the "error" channel.
logdie message
Log a fatal message at the "critical" priority to the "error" channel, and then dies.
logconfess message
Same as logdie(), but issues a Carp::confess(3) call instead. It is possible to
configure the "Log::Agent" module via the "-confess" switch to automatically redirect
a logdie() to logconfess(), which is invaluable during unit testing.
logcroak message
Same as logdie(), but issues a Carp::croak(3) call instead. It is possible to
configure the "Log::Agent" module via the "-confess" switch to automatically redirect
a logcroak() to logconfess(), which is invaluable during unit testing.
Log::Agent::inited
Returns true when "Log::Agent" was initialized, either explicitly via a logconfig() or
implicitly via any logxxx() call.
Modules sometimes wish to report errors from the perspective of their caller's caller, not
really their caller. The following interface is therefore provided:
logxcarp offset, message
Same a logcarp(), but with an additional offset to be applied on the stack. To warn
one level above your caller, set it to 1.
logxcroak offset, message
Same a logcroak(), but with an additional offset to be applied on the stack. To
report an error one level above your caller, set it to 1.
For applications that wish to implement a debug layer on top of "Log::Agent", the
following routine is provided. Note that it is not imported by default, i.e. it needs to
be explicitly mentioned at "use" time, since it is not meant to be used directly under
regular usage.
logwrite channel, priority, message
Unconditionally write the message at the given priority on channel. The channel can
be one of "debug", "error" or "output".
At the application level, one needs to commit once and for all about the logging scheme to
be used. This is done thanks to the logconfig() routine which takes the following
switches, in alphabetical order:
"-caller" => [ parameters ]
Request that caller information (relative to the logxxx() call) be part of the log
message. The given parameters are handed off to the creation routine of
"Log::Agent::Tag::Caller" and are documented there.
I usually say something like:
-caller => [ -display => '($sub/$line)', -postfix => 1 ]
which I find informative enough. On occasion, I found myself using more complex
sequences. See Log::Agent::Tag::Caller.
"-confess" => flag
When true, all logdie() calls will be automatically masqueraded as logconfess().
"-debug" => priority or level
Sets the priority threshold (can be expressed as a string or a number, the string
being mapped to a logging level as described above in PRIORITIES AND LEVEL) for
logdbg() calls.
Calls tagged with a level less than or equal to the given threshold will pass through,
others will return prematurely without logging anything.
"-driver" => driver_object
This switch defines the driver object to be used, which must be an heir of the
"Log::Agent::Driver" class. See Log::Agent::Driver(3) for a list of the available
drivers.
"-level" => priority or level
Specifies both "-debug" and "-trace" levels at the same time, to a common value.
"-prefix" => name
Defines the application name which will be pre-pended to all messages, followed by ":
" (a colon and a space). Using this switch alone will configure the default driver to
use that prefix (stripped down to its basename component).
When a driver object is used, the "-prefix" switch is kept at the "Log::Agent" level
only and is not passed to the driver: it is up to the driver's creation routine to
request the "-prefix". Having this information in Log::Agent enables the module to die
on critical errors with that error prefix, since it cannot rely on the logging driver
for that, obviously.
"-priority" => [ parameters ]
Request that message priority information be part of the log message. The given
parameters are handed off to the creation routine of "Log::Agent::Tag::Priority" and
are documented there.
I usually say something like:
-priority => [ -display => '[$priority]' ]
which will display the whole priority name at the beginning of the messages, e.g.
"[warning]" for a logwarn() or "[error]" for logerr(). See Log::Agent::Tag::Priority
and Log::Agent::Priorities.
NOTE: Using "-priority" does not prevent the "-duperr" flag of the file driver to also
add its own hardwired prefixing in front of duplicated error messages. The two
options act at a different level.
"-tags" => [ list of "Log::Agent::Tag" objects ]
Specifies user-defined tags to be added to each message. The objects given here must
inherit from "Log::Agent::Tag" and conform to its interface. See Log::Agent::Tag for
details.
At runtime, well after logconfig() was issued, it may be desirable to add (or remove)
a user tag. Use the "logtags()" routine for this purpose, and iteract directly with
the tag list object.
For instance, a web module might wish to tag all the messages with a session ID,
information that might not have been available by the time logconfig() was issued.
"-trace" => priority or level
Same a "-debug" but applies to logsay(), logwarn(), logerr() and logtrc().
When unspecified, "Log::Agent" runs at the "notice" level.
Additional routines, not exported by default, are:
logtags
Returns a "Log::Agent::Tag_List" object, which holds all user-defined tags that are to
be added to each log message.
The initial list of tags is normally supplied by the application at logconfig() time,
via the "-tags" argument. To add or remove tags after configuration time, one needs
direct access to the tag list, obtained via this routine. See Log::Agent::Tag_List
for the operations that can be performed.
KNOWN LIMITATIONS
The following limitations exist in this early version. They might be addressed in future
versions if they are perceived as annoying limitatons instead of being just documented
ones. :-)
• A module which calls logdie() may have its die trapped if called from within an
eval(), but unfortunately, the value of $@ is unpredictable: it may be prefixed or not
depending on the driver used. This is harder to fix as one might think of at first
glance.
• Some drivers lack customization and hardwire a few things that come from my personal
taste, like the prefixing done when duperr is set in Log::Agent::Driver::File, or the
fact that the "debug" and "stderr" channels are merged as one in the
Log::Agent::Driver::Default driver.
• When using logcroak() or logconfess(), the place where the call was made can still be
visible when -caller is used, since the addition of the caller information to the
message is done before calling the logging driver. Is this a problem?
AUTHOR
Log::Agent was originally authored by Raphael Manfredi <Raphael_Manfredi@pobox.com> and is
currently maintained by Mark Rogaski <mrogaski@cpan.org>.
LICENSE
Copyright (c) 1999-2000 Raphael Manfredi.
Copyright (c) 2002-2003, 2005, 2013 Mark Rogaski; all rights reserved.
This module is free software. You can redistribute it and/or modify it under the terms of
the Artistic License 2.0.
This program is distributed in the hope that it will be useful, but without any warranty;
without even the implied warranty of merchantability or fitness for a particular purpose.
SEE ALSO
Log::Agent::Driver(3), Carp(3).