Provided by: libmoosex-params-validate-perl_0.21-2_all 
NAME
MooseX::Params::Validate - an extension of Params::Validate using Moose's types
VERSION
version 0.21
SYNOPSIS
package Foo;
use Moose;
use MooseX::Params::Validate;
sub foo {
my ( $self, %params ) = validated_hash(
\@_,
bar => { isa => 'Str', default => 'Moose' },
);
return "Hooray for $params{bar}!";
}
sub bar {
my $self = shift;
my ( $foo, $baz, $gorch ) = validated_list(
\@_,
foo => { isa => 'Foo' },
baz => { isa => 'ArrayRef | HashRef', optional => 1 },
gorch => { isa => 'ArrayRef[Int]', optional => 1 }
);
[ $foo, $baz, $gorch ];
}
DESCRIPTION
This module fills a gap in Moose by adding method parameter validation to Moose. This is
just one of many developing options, it should not be considered the "official" one by any
means though.
You might also want to explore "MooseX::Method::Signatures" and "MooseX::Declare".
CAVEATS
It is not possible to introspect the method parameter specs; they are created as needed
when the method is called and cached for subsequent calls.
EXPORTS
validated_hash( \@_, %parameter_spec )
This behaves similarly to the standard Params::Validate "validate" function and
returns the captured values in a HASH. The one exception is where if it spots an
instance in the @_, then it will handle it appropriately (unlike Params::Validate
which forces you to shift you $self first).
The values in @_ can either be a set of name-value pairs or a single hash reference.
The %parameter_spec accepts the following options:
isa The "isa" option can be either; class name, Moose type constraint name or an anon
Moose type constraint.
does
The "does" option can be either; role name or an anon Moose type constraint.
default
This is the default value to be used if the value is not supplied.
optional
As with Params::Validate, all options are considered required unless otherwise
specified. This option is passed directly to Params::Validate.
coerce
If this is true and the parameter has a type constraint which has coercions, then
the coercion will be called for this parameter. If the type does have coercions,
then this parameter is ignored.
depends
Another parameter that this one depends on. See the Params::Validate documentation
for more details.
This function is also available under its old name, "validate".
validated_list( \@_, %parameter_spec )
The %parameter_spec accepts the same options as above, but returns the parameters as
positional values instead of a HASH. This is best explained by example:
sub foo {
my ( $self, $foo, $bar ) = validated_list(
\@_,
foo => { isa => 'Foo' },
bar => { isa => 'Bar' },
);
$foo->baz($bar);
}
We capture the order in which you defined the parameters and then return them as a
list in the same order. If a param is marked optional and not included, then it will
be set to "undef".
The values in @_ can either be a set of name-value pairs or a single hash reference.
Like "validated_hash", if it spots an object instance as the first parameter of @_, it
will handle it appropriately, returning it as the first argument.
This function is also available under its old name, "validatep".
pos_validated_list( \@_, $spec, $spec, ... )
This function validates a list of positional parameters. Each $spec should validate
one of the parameters in the list:
sub foo {
my $self = shift;
my ( $foo, $bar ) = pos_validated_list(
\@_,
{ isa => 'Foo' },
{ isa => 'Bar' },
);
...
}
Unlike the other functions, this function cannot find $self in the argument list. Make
sure to shift it off yourself before doing validation.
The values in @_ must be a list of values. You cannot pass the values as an array
reference, because this cannot be distinguished from passing one value which is itself
an array reference.
If a parameter is marked as optional and is not present, it will simply not be
returned.
If you want to pass in any of the cache control parameters described below, simply
pass them after the list of parameter validation specs:
sub foo {
my $self = shift;
my ( $foo, $bar ) = pos_validated_list(
\@_,
{ isa => 'Foo' },
{ isa => 'Bar' },
MX_PARAMS_VALIDATE_NO_CACHE => 1,
);
...
}
EXCEPTION FOR FAILED VALIDATION
If a type constraint check for a parameter fails, then the error is thrown as a
MooseX::Params::Validate::Exception::ValidationFailedForTypeConstraint object. When
stringified, this object will use the error message generated by the type constraint that
failed.
Other errors are simply percolated up from Params::Validate as-is, and are not turned into
exception objects. This may change in the future (or more likely, Params::Validate may
start throwing objects of its own).
ALLOWING EXTRA PARAMETERS
By default, any parameters not mentioned in the parameter spec cause this module to throw
an error. However, you can have this module simply ignore them by setting
"MX_PARAMS_VALIDATE_ALLOW_EXTRA" to a true value when calling a validation subroutine.
When calling "validated_hash" or "pos_validated_list" the extra parameters are simply
returned in the hash or list as appropriate. However, when you call "validated_list" the
extra parameters will not be returned at all. You can get them by looking at the original
value of @_.
EXPORTS
By default, this module exports the "validated_hash", "validated_list", and
"pos_validated_list".
If you would prefer to import the now deprecated functions "validate" and "validatep"
instead, you can use the ":deprecated" tag to import them.
IMPORTANT NOTE ON CACHING
When a validation subroutine is called the first time, the parameter spec is prepared and
cached to avoid unnecessary regeneration. It uses the fully qualified name of the
subroutine (package + subname) as the cache key. In 99.999% of the use cases for this
module, that will be the right thing to do.
However, I have (ab)used this module occasionally to handle dynamic sets of parameters. In
this special use case you can do a couple things to better control the caching behavior.
• Passing in the "MX_PARAMS_VALIDATE_NO_CACHE" flag in the parameter spec this will
prevent the parameter spec from being cached.
sub foo {
my ( $self, %params ) = validated_hash(
\@_,
foo => { isa => 'Foo' },
MX_PARAMS_VALIDATE_NO_CACHE => 1,
);
}
• Passing in "MX_PARAMS_VALIDATE_CACHE_KEY" with a value to be used as the cache key
will bypass the normal cache key generation.
sub foo {
my ( $self, %params ) = validated_hash(
\@_,
foo => { isa => 'Foo' },
MX_PARAMS_VALIDATE_CACHE_KEY => 'foo-42',
);
}
MAINTAINER
Dave Rolsky <autarch@urth.org>
BUGS
Please submit bugs to the CPAN RT system at
http://rt.cpan.org/NoAuth/ReportBug.html?Queue=moosex-params-validate or via email at
bug-moosex-params-validate@rt.cpan.org.
AUTHORS
• Stevan Little <stevan@cpan.org>
• Dave Rolsky <autarch@urth.org>
CONTRIBUTORS
• Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
• Hans Staugaard <h.staugaard@tweakker.com>
• Karen Etheridge <ether@cpan.org>
COPYRIGHT AND LICENSE
This software is copyright (c) 2013 - 2015 by Stevan Little <stevan@cpan.org>.
This is free software; you can redistribute it and/or modify it under the same terms as
the Perl 5 programming language system itself.