Provided by: libpdf-reuse-barcode-perl_0.07-2_all 
NAME
PDF::Reuse::Barcode - Create barcodes for PDF documents with PDF::Reuse
SYNOPSIS
use PDF::Reuse;
use PDF::Reuse::Barcode;
use strict;
prFile('bars.pdf');
PDF::Reuse::Barcode::ITF (x => 70,
y => 530,
value => '0123456789',
prolong => 2.96);
prEnd();
DESCRIPTION
This is a sub-module to PDF::Reuse. It creates barcode "images" to be used in PDF
documents. It uses GD::Barcode and its sub-modules: GD::Barcode::Code39, COOP2of5, EAN13
and so on, to calculate the barcode pattern. For Code128 it uses Barcode::Code128.
Normally the barcodes are displayed on a white background and with the characters under
the bars. You can rotate the "image", make it smaller or bigger, prolong the bars and
change the background. (But then, don't forget to test that your barcode scanner still
understands it.)
If you don't change the size of the "image", the bars are approximately 24 pixels high
(the guard bars a few pixels longer) and the box/background is 38 pixels high and
something like 20 pixels wider than the barcodes. The text under the bars are 10 pixels
high.
FUNCTIONS
All functions are called in a similar way. Just replace 'ITF' in the example under
SYNOPSIS with some other function name and let the value parameter follow the rules of
that function.
Code128
Creates Code128 barcodes with the help of Barcode::Code128. Look at that module for
further information.
# code128.pl
use PDF::Reuse;
use PDF::Reuse::Barcode;
prFile('code128.pdf');
PDF::Reuse::Barcode::Code128(x => 100,
y => 730,
value => '00000123455555555558');
prEnd();
The constants CodeA, FNC1, SHIFT and so on, are not imported, but if you really need them
(??), try to use the character values instead.
CodeA 0xf4 CodeB 0xf5 CodeC 0xf6
FNC1 0xf7 FNC2 0xf8 FNC3 0xf9
FNC4 0xfa Shift 0xfb StartA 0xfc
StartB 0xfd StartC 0xfe Stop 0xff
# unusual.pl
# Instead of FCN1
use PDF::Reuse;
use PDF::Reuse::Barcode;
prFile('unusual.pdf');
PDF::Reuse::Barcode::Code128(x => 100,
y => 430,
value => chr(0xf7) . '00000123455555555558',
text => 0 );
# Font and font size has to be chosen
# Text could be put manually at x => 110
# y => 431
# The size, xSize, ySize and rotation doesn't influence the text
# in this case ...
prEnd();
Code39
Translates the characters 0-9, A-Z, '-', '*', '+', '$', '%', '/', '.' and ' ' to a barcode
pattern.
In Code39, the asterisk is used as the start and stop bar, but PDF::Reuse::Barcode expects
you to supply the asterisks. If you do not want them to display in the text version, pass
the option "hide_asterisk" as in
PDF::Reuse::Barcode::Code39 (x => 10,
y => 20,
value => '*62002*',
hide_asterisk => 1);
COOP2of5
Creates COOP2of5 barcodes from a string consisting of the numeric characters 0-9
EAN13
Creates EAN13 barcodes from a string of 12 or 13 digits. The check number (the 13:th
digit) is calculated if not supplied. If there is given check number it is not
controlled.
EAN8
Translates a string of 7 or 8 digits to EAN8 barcodes. The check number (the 8:th digit)
is calculated if not supplied. If there is given check number it is not controlled.
IATA2of5
Creates IATA2of5 barcodes from a string consisting of the numeric characters 0-9
Industrial2of5
Creates Industrial2of5 barcodes from a string consisting of the numeric characters 0-9
ITF
Translates the characters 0-9 to a barcodes. These barcodes could also be called
'Interleaved2of5'.
Matrix2of5
Creates Matrix2of5 barcodes from a string consisting of the numeric characters 0-9
NW7
Creates a NW7 barcodes from a string consisting of the numeric characters 0-9
QRcode
Creates QRcodes from numeric, alphanumeric, binary or Kanji data (or a mixture of these).
UPCA
Translates a string of 11 or 12 digits to UPCA barcodes. The check number (the 12:th
digit) is calculated if not supplied. If there is given check number it is not controlled.
UPCE
Translates a string of 6, 7 or 8 digits to UPCE barcodes. If the string is 6 digits long,
'0' is added first in the string. The check number (the 8:th digit) is calculated if not
supplied. If there is given check number it is not controlled.
COMMON PARAMETERS
All functions accepts these parameters. The parameters should be put in a hash. All of
them are optional, except 'value'.
value
A string of characters which will be translated to barcodes.
x
Number of pixels along the x-axis where to put the lower left "corner" of the barcode
image.
y
Number of pixels along the y-axis where to put the lower left "corner" of the barcode
image.
size
A (decimal) number. If you define a number for this parameter, all sizes along the x- and
y-axes will multiplied by this number. Also the text under the bars will be scaled.
For QRcodes, the square of this number determines the number of 'modulesize' rectangles
used to represent a single module (so 1=1, 2=4, 3=9, etc).
xSize
A (decimal) number. If you define a number for this parameter, all sizes along the x-axis
will multiplied by this number. The text under the bars are also affected.
ySize
A (decimal) number. If you define a number for this parameter, all sizes along the y-axis
will multiplied by this number. The text under the bars are also affected.
prolong
0 or a decimal number greater than 1. Prolongs the bars with this factor. In reality
tells the module to prolong the bars by repeatedly rewriting the barcode pattern.
text
Normally this parameter is 'yes', which will cause the digits to be written as text under
the barcodes. If this parameter is '' or 0, the text will be suppressed.
drawbackground
By default this parameter is 1, which will cause the barcodes to be drawn on a prepared
background. If this parameter is '' or 0, the current background will be used, and the
module will not try change it.
For QRcodes, this will use the 'graybackground' color to draw a rectangle including the
"quiet zone" around the QRcode.
background
Normally it is '1 1 1', which will draw a white background/box around the barcodes.
Choose another RGB-combination if you want another color.
For QRcodes, see 'graybackground'.
rotate
A degree to rotate the barcode image counter-clockwise
QRCODE SPECIFIC PARAMETERS
When generating QRcodes, some of the common parameters are ignored and some QRcode
specific parameters are available for modifying features of the QRcode. QRcodes are
generated with a Gray colorspace.
graybackground
Normally it is 1, which will draw a white background/box around the QRcodes. Choose
another value between 0 and 1 (inclusive) to specify a different shade of gray for the
background.
modulesize
Defaults to 1. Sets the size in Postscript points of the rectangle drawn for a single
rectangle when drawing a QRcode.
qr_ecc
Defaults to 'M'. Sets the error correction mode for the QRcode and can be set to L (Low),
M (Medium), Q (Quartile), or H (High).
qr_version
Defaults to 1. Set to an integer value from 1 to 40 to select the size and data capacity
of the QRcode.
qr_padding
Defaults to 0. Sets an amount of padding to insert between modules in the QRcode (may be
useful if prints do not scan well).
EXAMPLE
use PDF::Reuse;
use PDF::Reuse::Barcode;
use strict;
prFile('bars.pdf');
#################################################################
# First a rectangle is drawn in the upper part of the page
#################################################################
my $str = "q\n"; # save the graphic state
$str .= "0.9 0.5 0.5 rg\n"; # a fill color
$str .= "10 400 440 410 re\n"; # a rectangle
$str .= "b\n"; # fill (and a little more)
$str .= "Q\n"; # restore the graphic state
prAdd($str);
#################################
# An image with prolonged bars,
#################################
PDF::Reuse::Barcode::ITF (x => 50,
y => 700,
value => '0123456789',
prolong => 2.96);
#############################
# A magnified barcode image
#############################
PDF::Reuse::Barcode::EAN13 (x => 250,
y => 700,
value => '012345678901',
size => 1.5);
######################################################
# A barcode image magnified a little along the y-axis
######################################################
PDF::Reuse::Barcode::EAN8 (x => 150,
y => 500,
value => '0123456',
ySize => 1.2);
################################
# With the box in a light color
################################
PDF::Reuse::Barcode::Code39 (x => 70,
y => 300,
value => '*THIS IS SOMETHING*',
background => '0.99 0.97 0.97',
hide_asterisk => 1);
#############################################
# With everything expanded along the x-axis
#############################################
PDF::Reuse::Barcode::NW7 (x => 70,
y => 100,
value => '012345678901',
xSize => 2);
#################################################
# An image, 90 degrees rotated, might look
# strange on the screen, should be ok as printed
#################################################
PDF::Reuse::Barcode::UPCA (x => 400,
y => 100,
value => '12345678901',
drawbackground => 0,
rotate => 90);
#################################################
# A QRcode with a 10% gray "quiet zone"
#################################################
PDF::Reuse::Barcode::QRcode (x => 300,
y => 500,
value => 'http://example.org/',
drawbackground => 1,
graybackground => 0.9, # 10% gray
qr_version => 2,
modulesize => 2);
prEnd();
LIMITATION
EAN13, EAN8, UPCA and UPCE have "guard" bars. These, a little longer bars, are often a
little blurred at the lower ends when they are displayed on a screen. If you magnify the
image, the lines are displayed correctly. When you print the image there shouldn't be any
problem, if you use at least 600 dpi.
Also rotated barcodes might look strange on a screen. Most often they are much better as
printed on paper. Try to use "size" rather than "prolong", when you have a rotated barcode
"image". (If it has been rotated 90 or 270 degrees, you can make the bars longer with the
help of xSize.)
SEE ALSO
These modules are used for calculation of the barcode pattern
Barcode::Code128
GD::Barcode
GD::Barcode::Code39
GD::Barcode::COOP2of5
GD::Barcode::EAN13
GD::Barcode::EAN8
GD::Barcode::IATA2of5
GD::Barcode::Industrial2of5
GD::Barcode::ITF
GD::Barcode::Matrix2of5
GD::Barcode::NW7
GD::Barcode::QRcode
GD::Barcode::UPCA
GD::Barcode::UPCE
AUTHOR
Lars Lundberg, larslund@cpan.org Chris Nighswonger, cnighs@cpan.org
THANKS TO
Everyone who has helped me with corrections and ideas, Martin Langhoff among others. And
of course credits to Kawai Takanori and William R. Ward who have written the modules for
calculating the barcode patterns.
COPYRIGHT
Copyright (C) 2003 - 2009 Lars Lundberg, Solidez HB. All rights reserved. Copyright (C)
2010 - 2014 Chris Nighswonger This program is free software; you can redistribute it
and/or modify it under the same terms as Perl itself.
DISCLAIMER
You get this module free as it is, but nothing is guaranteed to work, whatever implicitly
or explicitly stated in this document, and everything you do, you do at your own risk - I
will not take responsibility for any damage, loss of money and/or health that may arise
from the use of this module!