Provided by: libsnmp-info-perl_3.92-1_all 
NAME
SNMP::Info::Airespace - SNMP Interface to data from AIRESPACE-WIRELESS-MIB and
AIRESPACE-SWITCHING-MIB
AUTHOR
Eric Miller
SYNOPSIS
my $airespace = new SNMP::Info(
AutoSpecify => 1,
Debug => 1,
DestHost => 'myswitch',
Community => 'public',
Version => 2
)
or die "Can't connect to DestHost.\n";
my $class = $airespace->class();
print " Using device sub class : $class\n";
DESCRIPTION
SNMP::Info::Airespace is a subclass of SNMP::Info that provides an interface to AIRESPACE-
WIRELESS-MIB and AIRESPACE-SWITCHING-MIB. These MIBs are used in Airespace wireless
switches, as well as, products from Cisco, Nortel, and Alcatel which are based upon the
Airespace platform.
The Airespace platform utilizes intelligent wireless switches which control thin access
points. The thin access points themselves are unable to be polled for end station
information.
This class emulates bridge functionality for the wireless switch. This enables end station
MAC addresses collection and correlation to the thin access point the end station is using
for communication.
Use or create a subclass of SNMP::Info that inherits this one. Do not use directly.
Inherited Classes
None.
Required MIBs
AIRESPACE-WIRELESS-MIB
AIRESPACE-SWITCHING-MIB
GLOBALS
These are methods that return scalar value from SNMP
$airespace->airespace_type()
("agentInventoryMachineType")
$airespace->airespace_model()
("agentInventoryMachineModel")
$airespace->airespace_serial()
("agentInventorySerialNumber")
$airespace->airespace_maint_ver()
("agentInventoryMaintenanceLevel")
$airespace->airespace_mac()
("agentInventoryBurnedInMacAddress")
$airespace->airespace_os()
("agentInventoryOperatingSystem")
$airespace->airespace_vendor()
("agentInventoryManufacturerName")
$airespace->airespace_prod_name()
("agentInventoryProductName")
$airespace->os_ver()
("agentInventoryProductVersion")
$airespace->airespace_bssid_mode()
("agentNetworkBroadcastSsidMode")
$airespace->airespace_mc_mode()
("agentNetworkMulticastMode")
$airespace->airespace_lwapp_mode()
The LWAPP transport mode decides if the switch is operating in the Layer2 or Layer3
mode.
("agentSwitchLwappTransportMode")
$airespace->airespace_ul_mode()
Transfer upload mode configures the mode to use when uploading from the switch.
Normal usage tftp.
("agentTransferUploadMode")
$airespace->airespace_ul_ip()
Transfer upload tftp server ip configures the IP address of the server. It is valid
only when the Transfer Mode is tftp.
("agentTransferUploadServerIP")
$airespace->airespace_ul_path()
Transfer upload tftp path configures the directory path where the file is to be
uploaded to. The switch remembers the last file path used.
("agentTransferUploadPath")
$airespace->airespace_ul_file()
("agentTransferUploadFilename")
$airespace->airespace_ul_type()
Transfer upload datatype configures the type of file to upload from the switch.
The types for upload are:
config(2)
errorlog(3)
systemtrace(4)
traplog(5)
crashfile(6)
("agentTransferUploadDataType")
$airespace->airespace_ul_start()
("agentTransferUploadStart")
$airespace->airespace_ul_status()
("agentTransferUploadStatus")
Overrides
$airespace->layers()
Returns 00000111. Class emulates Layer 2 functionality for Thin APs through
proprietary MIBs.
$airespace->serial()
("agentInventorySerialNumber")
TABLE METHODS
These are methods that return tables of information in the form of a reference to a hash.
$airespace->i_ssidlist()
Returns reference to hash. SSID's recognized by the radio interface.
$airespace->i_ssidbcast()
Returns reference to hash. Indicates whether the SSID is broadcast.
$airespace->i_80211channel()
Returns reference to hash. Current operating frequency channel of the radio
interface.
$airespace->dot11_cur_tx_pwr_mw()
Returns reference to hash. Current transmit power, in milliwatts, of the radio
interface.
$airespace->i_ssidmac()
With the same keys as i_ssidlist, returns the Basic service set identification
(BSSID), MAC address, the AP is using for the SSID.
Dot11 Ess Table ("bsnDot11EssTable")
Ess(WLAN) Configuration Table. Maximum of 17 WLANs can be created on Airespace Switch.
Index of 17 is reserved for WLAN for Third Party APs(non-Airespace APs).
$airespace->airespace_ess_idx()
("bsnDot11EssIndex")
$airespace->airespace_ess_ssid()
SSID assigned to ESS(WLAN)
("bsnDot11EssSsid")
$airespace->airespace_ess_macflt()
Select to filter clients by MAC address. By selecting this Security, you need to
create MAC Filters in "bsnUsersTable" or have MAC Filters configured on Radius Servers
specified in "bsnRadiusAuthenticationTable"
("bsnDot11EssMacFiltering")
$airespace->airespace_ess_status()
Administrative Status of ESS(WLAN).
("bsnDot11EssAdminStatus")
$airespace->airespace_ess_sec_auth()
Type of 802.11 Authentication.
("bsnDot11EssSecurityAuthType")
$airespace->airespace_ess_radio_pol()
Radio Policy for a WLAN. It can either be All where it will be applicable to ALL types
of protocols or it can be set to apply to combinations of 802.11a, 802.11b, 802.11g.
("bsnDot11EssRadioPolicy")
$airespace->airespace_ess_qos()
Quality of Service for a WLAN.
("bsnDot11EssQualityOfService")
$airespace->airespace_ess_ifname()
Name of the interface used by this WLAN.
("bsnDot11EssInterfaceName")
$airespace->airespace_ess_aclname()
Name of ACL for the WLAN. This is applicable only when Web Authentication is enabled.
("bsnDot11EssAclName")
$airespace->airespace_ess_bcast()
This attribute when enabled allows the switch to broadcast this SSID.
("bsnDot11EssBroadcastSsid")
AP Table ("bsnAPTable")
Table of Airespace APs managed by this Airespace Switch.
$airespace->airespace_ap_mac()
The MAC address of the 802.3 interface of the AP.
("bsnAPDot3MacAddress")
$airespace->airespace_ap_name()
Name assigned to this AP. If an AP is not configured its factory default name will be
ap:<last three byte of MAC Address>. e.g. ap:af:12:be
("bsnAPName")
$airespace->airespace_ap_ip()
Ip address of the AP. This will not be available when the switch is operating in the
Layer2 mode. In this case, the attribute will return 0 as value.
("bsnApIpAddress")
$airespace->airespace_ap_loc()
User specified location of this AP.
("bsnAPLocation")
$airespace->airespace_ap_sw()
("bsnAPSoftwareVersion")
$airespace->airespace_ap_fw()
("bsnAPBootVersion")
$airespace->airespace_ap_model()
("bsnAPModel")
$airespace->airespace_ap_serial()
("bsnAPSerialNumber")
$airespace->airespace_ap_type()
("bsnAPType")
$airespace->airespace_ap_status()
("bsnAPAdminStatus")
AP Interface Table ("bsnAPIfTable")
Table of 802.11 interfaces in an Airespace APs.
$airespace->airespace_apif_slot()
The slot Id of this interface. Value will be 0 for a 802.11a (5Ghz) interface and will
be 1 for 802.11b/g (2.4Ghz) interface.
("bsnAPIfSlotId")
$airespace->airespace_apif_type()
("bsnAPIfType")
$airespace->airespace_apif_ch_num()
("bsnAPIfPhyChannelNumber")
$airespace->airespace_apif_power()
The transmit power level N currently being used to transmit data.
("bsnAPIfPhyTxPowerLevel")
$airespace->airespace_apif()
("bsnAPIfOperStatus")
$airespace->airespace_apif_oride()
This flag when disabled implies that all WLANs are available from this radio.
However, if this is enabled, then only those WLANs that appear in the
("bsnApIfWlanOverrideTable") will be available from this radio.
("bsnAPIfWlanOverride")
$airespace->airespace_apif_admin()
("bsnAPIfAdminStatus")
$airespace->airespace_apif_a_pwr()
List of comma separated absolute power levels supported by the radio.
("bsnAPIfAbsolutePowerList")
Mobile Station Table ("bsnMobileStationTable")
$airespace->airespace_sta_mac()
Mac Address of the AP on which Mobile Station is associated.
("bsnMobileStationAPMacAddr")
$airespace->airespace_sta_slot()
Slot Id of AP If on which mobile station is associated.
("bsnMobileStationAPIfSlotId")
$airespace->airespace_sta_ess_idx()
Ess Index of the Wlan(SSID) that is being used by Mobile Station to connect to the AP.
("bsnMobileStationEssIndex")
$airespace->airespace_sta_ssid()
The SSID Advertised by the Mobile Station.
("bsnMobileStationSsid")
$airespace->airespace_sta_delete()
Action to Deauthenticate the Mobile Station. Set the State to delete.
("bsnMobileStationDeleteAction")
Users Table ("bsnUsersTable")
The (conceptual) table listing Wlan Users.
$airespace->airespace_user_name()
User name. For MAC filters, this will be the MAC address (e.g. 000123456789).
("bsnUserName")
$airespace->airespace_user_pw()
User Password. For MAC filters, this will be "nopassword".
("bsnUserPassword")
$airespace->airespace_user_ess_idx()
User WLAN ID. Value 0 implies that this applies to any WLAN ID.
("bsnUserEssIndex")
$airespace->airespace_user_access()
For MAC filters, this will be "readOnly".
("bsnUserAccessMode")
$airespace->airespace_user_type()
User Access Mode. For MAC filters, this will be "macFilter".
("bsnUserType")
$airespace->airespace_user_ifname()
ACL for MAC Filters. An interface name from "agentInterfaceConfigTable"
("bsnUserInterfaceName")
$airespace->airespace_user_rstat()
("bsnUserRowStatus")
Black List Client Table ("bsnBlackListClientTable")
The table listing Wlan Black Listed Clients
$airespace->airespace_bl_mac()
("bsnBlackListClientMacAddress")
$airespace->airespace_bl_descr()
("bsnBlackListClientDescription")
$airespace->airespace_bl_rstat()
("bsnBlackListClientRowStatus")
AP Interface WLAN Override Table ("bsnAPIfWlanOverrideTable")
Each entry represents an SSID added to the AP when the attribute "bsnAPIfWlanOverride" on
the radio is enabled. This means only those WLANs on the switch that are added to this
table will be available on such a radio.
$airespace->airespace_oride_id()
Index of the WLAN ("bsnDot11EssIndex") added to the radio.
("bsnAPIfWlanOverrideId")
$airespace->airespace_oride_ssid()
SSID assigned to the override WLAN.
("bsnAPIfWlanOverrideSsid")
Interface Config Table ("agentInterfaceConfigTable")
A table of the switch's Interface Config entries. Typically, it will contain entries for
Service Port Interface, DS Port Interface and Virtual Gateway Interface apart from other
entries.
$airespace->airespace_if_name()
Interface Name. This values is 'management' for DS port, 'service-port' for service
port and 'virtual' for virtual gateway. For other interfaces, the name can be
anything. These interfaces are already created by default.
("agentInterfaceName")
$airespace->airespace_if_vlan()
VLAN Id configured for the Interface.
("agentInterfaceVlanId")
$airespace->airespace_if_type()
The interface's type. The static type is set for the interfaces that are created by
default on the switch and these cannot be deleted. Any other interface that is created
is of type dynamic which can be deleted.
("agentInterfaceType")
$airespace->airespace_if_mac()
Interface MAC Address. This is only applicable in case of management and service-port
interfaces.
("agentInterfaceMacAddress")
$airespace->airespace_if_ip()
("agentInterfaceIPAddress")
$airespace->airespace_if_mask()
("agentInterfaceIPNetmask")
$airespace->airespace_if_acl()
Name of the Access Control List applied to the interface. This attribute is applicable
only to the management interface and other dynamic interfaces. If it is required to
remove the ACL name for an interface, it should be set to an empty string.
("agentInterfaceAclName")
$airespace->airespace_if_rstat()
("agentInterfaceRowStatus")
Port Config Table ("agentPortConfigTable")
$airespace->airespace_duplex_admin()
("agentPortPhysicalMode")
$airespace->airespace_duplex()
("agentPortPhysicalStatus")
Overrides
$airespace->i_index()
Returns reference to map of IIDs to Interface index.
Extends "ifIndex" to support thin APs and WLAN virtual interfaces as device
interfaces.
$airespace->interfaces()
Returns reference to map of IIDs to ports. Thin APs are implemented as device
interfaces. The thin AP MAC address airespace_ap_mac() and Slot ID
airespace_apif_slot() are used as the port identifier. Virtual interfaces use
airespace_if_name() as the port identifier.
$airespace->i_name()
Returns reference to map of IIDs to interface names. Returns "ifName" for Ethernet
interfaces, airespace_ap_name() for thin AP interfaces, and airespace_if_name() for
virtual interfaces.
$airespace->i_description()
Returns reference to map of IIDs to interface descriptions. Returns "ifDescr" for
Ethernet interfaces, airespace_ap_loc() for thin AP interfaces, and
airespace_if_name() for virtual interfaces.
$airespace->i_type()
Returns reference to map of IIDs to interface types. Returns "ifType" for Ethernet
interfaces, airespace_apif_type() for thin AP interfaces, and airespace_if_type() for
virtual interfaces.
$airespace->i_up()
Returns reference to map of IIDs to link status of the interface. Returns
"ifOperStatus" for Ethernet interfaces and airespace_apif() for thin AP interfaces.
$airespace->i_up_admin()
Returns reference to map of IIDs to administrative status of the interface. Returns
"ifAdminStatus" for Ethernet interfaces and airespace_apif_admin() for thin AP
interfaces.
$airespace->i_mac()
Returns reference to map of IIDs to MAC address of the interface. Returns
"ifPhysAddress" for Ethernet interfaces and airespace_if_mac() for virtual interfaces.
$airespace->i_vlan()
Returns reference to map of IIDs to VLAN ID of the interface. Returns
airespace_if_vlan() for virtual interfaces.
$airespace->i_duplex()
Returns reference to map of IIDs to current link duplex. Ethernet interfaces only.
$airespace->i_duplex_admin()
Returns reference to hash of IIDs to admin duplex setting. Ethernet interfaces only.
$airespace->ip_index()
Extends table by mapping airespace_if_ip() to the interface IID.
$airespace->ip_netmask()
Extends IP table by mapping airespace_if_mask() to airespace_if_ip()
$airespace->bp_index()
Simulates bridge MIB by returning reference to a hash mapping i_index() to the
interface iid.
$airespace->fw_port()
Returns reference to a hash, value being airespace_sta_mac() and airespace_sta_slot()
combined to match the interface iid.
$airespace->fw_mac()
("bsnMobileStationMacAddress")
Pseudo ENTITY-MIB information
These methods emulate ENTITY-MIB Physical Table methods using AIRESPACE-SWITCHING-MIB and
AIRESPACE-WIRELESS-MIB. Thin APs are included as subcomponents of the wireless
controller.
$airespace->e_index()
Returns reference to hash. Key: IID and Value: Integer. The index for APs is created
with an integer representation of the last three octets of the AP MAC address.
$airespace->e_class()
Returns reference to hash. Key: IID, Value: General hardware type. Return ap for
wireless access points.
$airespace->e_descr()
Returns reference to hash. Key: IID, Value: Human friendly name.
$airespace->e_model()
Returns reference to hash. Key: IID, Value: Model name.
$airespace->e_name()
More computer friendly name of entity. Name is either 'WLAN Controller' or 'AP'.
$airespace->e_vendor()
Returns reference to hash. Key: IID, Value: cisco.
$airespace->e_serial()
Returns reference to hash. Key: IID, Value: Serial number.
$airespace->e_pos()
Returns reference to hash. Key: IID, Value: The relative position among all entities
sharing the same parent.
$airespace->e_type()
Returns reference to hash. Key: IID, Value: Type of component.
$airespace->e_fwver()
Returns reference to hash. Key: IID, Value: Firmware revision.
$airespace->e_swver()
Returns reference to hash. Key: IID, Value: Software revision.
$airespace->e_parent()
Returns reference to hash. Key: IID, Value: The value of e_index() for the entity
which 'contains' this entity.
Arp Cache Table Augmentation
The controller has knowledge of MAC->IP mappings for wireless clients. Augmenting the arp
cache data with these MAC->IP mappings enables visibility for stations that only
communicate locally.
$airespace->at_paddr()
Adds MAC addresses extracted from the index of "bsnMobileStationIpAddress".
$airespace->at_netaddr()
Adds IP addresses from "bsnMobileStationIpAddress".
Data Munging Callback Subroutines
munge_64bits()
Truncate packet values to 32 bits.