Provided by: libssl-doc_3.0.10-1ubuntu2.3_all 
NAME
SSL_read_ex, SSL_read, SSL_peek_ex, SSL_peek - read bytes from a TLS/SSL connection
SYNOPSIS
#include <openssl/ssl.h>
int SSL_read_ex(SSL *ssl, void *buf, size_t num, size_t *readbytes);
int SSL_read(SSL *ssl, void *buf, int num);
int SSL_peek_ex(SSL *ssl, void *buf, size_t num, size_t *readbytes);
int SSL_peek(SSL *ssl, void *buf, int num);
DESCRIPTION
SSL_read_ex() and SSL_read() try to read num bytes from the specified ssl into the buffer
buf. On success SSL_read_ex() will store the number of bytes actually read in *readbytes.
SSL_peek_ex() and SSL_peek() are identical to SSL_read_ex() and SSL_read() respectively
except no bytes are actually removed from the underlying BIO during the read, so that a
subsequent call to SSL_read_ex() or SSL_read() will yield at least the same bytes.
NOTES
In the paragraphs below a "read function" is defined as one of SSL_read_ex(), SSL_read(),
SSL_peek_ex() or SSL_peek().
If necessary, a read function will negotiate a TLS/SSL session, if not already explicitly
performed by SSL_connect(3) or SSL_accept(3). If the peer requests a re-negotiation, it
will be performed transparently during the read function operation. The behaviour of the
read functions depends on the underlying BIO.
For the transparent negotiation to succeed, the ssl must have been initialized to client
or server mode. This is being done by calling SSL_set_connect_state(3) or
SSL_set_accept_state() before the first invocation of a read function.
The read functions work based on the SSL/TLS records. The data are received in records
(with a maximum record size of 16kB). Only when a record has been completely received, can
it be processed (decryption and check of integrity). Therefore, data that was not
retrieved at the last read call can still be buffered inside the SSL layer and will be
retrieved on the next read call. If num is higher than the number of bytes buffered then
the read functions will return with the bytes buffered. If no more bytes are in the
buffer, the read functions will trigger the processing of the next record. Only when the
record has been received and processed completely will the read functions return reporting
success. At most the contents of one record will be returned. As the size of an SSL/TLS
record may exceed the maximum packet size of the underlying transport (e.g. TCP), it may
be necessary to read several packets from the transport layer before the record is
complete and the read call can succeed.
If SSL_MODE_AUTO_RETRY has been switched off and a non-application data record has been
processed, the read function can return and set the error to SSL_ERROR_WANT_READ. In this
case there might still be unprocessed data available in the BIO. If read ahead was set
using SSL_CTX_set_read_ahead(3), there might also still be unprocessed data available in
the SSL. This behaviour can be controlled using the SSL_CTX_set_mode(3) call.
If the underlying BIO is blocking, a read function will only return once the read
operation has been finished or an error occurred, except when a non-application data
record has been processed and SSL_MODE_AUTO_RETRY is not set. Note that if
SSL_MODE_AUTO_RETRY is set and only non-application data is available the call will hang.
If the underlying BIO is nonblocking, a read function will also return when the underlying
BIO could not satisfy the needs of the function to continue the operation. In this case a
call to SSL_get_error(3) with the return value of the read function will yield
SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE. As at any time it's possible that non-
application data needs to be sent, a read function can also cause write operations. The
calling process then must repeat the call after taking appropriate action to satisfy the
needs of the read function. The action depends on the underlying BIO. When using a
nonblocking socket, nothing is to be done, but select() can be used to check for the
required condition. When using a buffering BIO, like a BIO pair, data must be written
into or retrieved out of the BIO before being able to continue.
SSL_pending(3) can be used to find out whether there are buffered bytes available for
immediate retrieval. In this case the read function can be called without blocking or
actually receiving new data from the underlying socket.
RETURN VALUES
SSL_read_ex() and SSL_peek_ex() will return 1 for success or 0 for failure. Success means
that 1 or more application data bytes have been read from the SSL connection. Failure
means that no bytes could be read from the SSL connection. Failures can be retryable
(e.g. we are waiting for more bytes to be delivered by the network) or non-retryable (e.g.
a fatal network error). In the event of a failure call SSL_get_error(3) to find out the
reason which indicates whether the call is retryable or not.
For SSL_read() and SSL_peek() the following return values can occur:
> 0 The read operation was successful. The return value is the number of bytes actually
read from the TLS/SSL connection.
<= 0
The read operation was not successful, because either the connection was closed, an
error occurred or action must be taken by the calling process. Call SSL_get_error(3)
with the return value ret to find out the reason.
Old documentation indicated a difference between 0 and -1, and that -1 was retryable.
You should instead call SSL_get_error() to find out if it's retryable.
SEE ALSO
SSL_get_error(3), SSL_write_ex(3), SSL_CTX_set_mode(3), SSL_CTX_new(3), SSL_connect(3),
SSL_accept(3) SSL_set_connect_state(3), SSL_pending(3), SSL_shutdown(3),
SSL_set_shutdown(3), ssl(7), bio(7)
HISTORY
The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1.
COPYRIGHT
Copyright 2000-2020 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except
in compliance with the License. You can obtain a copy in the file LICENSE in the source
distribution or at <https://www.openssl.org/source/license.html>.