Provided by: ocaml-man_4.13.1-6ubuntu1_all
NAME
Stdlib.Float - no description
Module
Module Stdlib.Float
Documentation
Module Float : (module Stdlib__Float) val zero : float The floating point 0. Since 4.08.0 val one : float The floating-point 1. Since 4.08.0 val minus_one : float The floating-point -1. Since 4.08.0 val neg : float -> float Unary negation. val add : float -> float -> float Floating-point addition. val sub : float -> float -> float Floating-point subtraction. val mul : float -> float -> float Floating-point multiplication. val div : float -> float -> float Floating-point division. val fma : float -> float -> float -> float fma x y z returns x * y + z , with a best effort for computing this expression with a single rounding, using either hardware instructions (providing full IEEE compliance) or a software emulation. On 64-bit Cygwin, 64-bit mingw-w64 and MSVC 2017 and earlier, this function may be emulated owing to known bugs on limitations on these platforms. Note: since software emulation of the fma is costly, make sure that you are using hardware fma support if performance matters. Since 4.08.0 val rem : float -> float -> float rem a b returns the remainder of a with respect to b . The returned value is a -. n *. b , where n is the quotient a /. b rounded towards zero to an integer. val succ : float -> float succ x returns the floating point number right after x i.e., the smallest floating-point number greater than x . See also Float.next_after . Since 4.08.0 val pred : float -> float pred x returns the floating-point number right before x i.e., the greatest floating-point number smaller than x . See also Float.next_after . Since 4.08.0 val abs : float -> float abs f returns the absolute value of f . val infinity : float Positive infinity. val neg_infinity : float Negative infinity. val nan : float A special floating-point value denoting the result of an undefined operation such as 0.0 /. 0.0 . Stands for 'not a number'. Any floating-point operation with nan as argument returns nan as result. As for floating-point comparisons, = , < , <= , > and >= return false and <> returns true if one or both of their arguments is nan . val pi : float The constant pi. val max_float : float The largest positive finite value of type float . val min_float : float The smallest positive, non-zero, non-denormalized value of type float . val epsilon : float The difference between 1.0 and the smallest exactly representable floating-point number greater than 1.0 . val is_finite : float -> bool is_finite x is true if and only if x is finite i.e., not infinite and not Float.nan . Since 4.08.0 val is_infinite : float -> bool is_infinite x is true if and only if x is Float.infinity or Float.neg_infinity . Since 4.08.0 val is_nan : float -> bool is_nan x is true if and only if x is not a number (see Float.nan ). Since 4.08.0 val is_integer : float -> bool is_integer x is true if and only if x is an integer. Since 4.08.0 val of_int : int -> float Convert an integer to floating-point. val to_int : float -> int Truncate the given floating-point number to an integer. The result is unspecified if the argument is nan or falls outside the range of representable integers. val of_string : string -> float Convert the given string to a float. The string is read in decimal (by default) or in hexadecimal (marked by 0x or 0X ). The format of decimal floating-point numbers is [-] dd.ddd (e|E) [+|-] dd , where d stands for a decimal digit. The format of hexadecimal floating-point numbers is [-] 0(x|X) hh.hhh (p|P) [+|-] dd , where h stands for an hexadecimal digit and d for a decimal digit. In both cases, at least one of the integer and fractional parts must be given; the exponent part is optional. The _ (underscore) character can appear anywhere in the string and is ignored. Depending on the execution platforms, other representations of floating-point numbers can be accepted, but should not be relied upon. Raises Failure if the given string is not a valid representation of a float. val of_string_opt : string -> float option Same as of_string , but returns None instead of raising. val to_string : float -> string Return the string representation of a floating-point number. type fpclass = fpclass = | FP_normal (* Normal number, none of the below *) | FP_subnormal (* Number very close to 0.0, has reduced precision *) | FP_zero (* Number is 0.0 or -0.0 *) | FP_infinite (* Number is positive or negative infinity *) | FP_nan (* Not a number: result of an undefined operation *) The five classes of floating-point numbers, as determined by the Float.classify_float function. val classify_float : float -> fpclass Return the class of the given floating-point number: normal, subnormal, zero, infinite, or not a number. val pow : float -> float -> float Exponentiation. val sqrt : float -> float Square root. val cbrt : float -> float Cube root. Since 4.13.0 val exp : float -> float Exponential. val exp2 : float -> float Base 2 exponential function. Since 4.13.0 val log : float -> float Natural logarithm. val log10 : float -> float Base 10 logarithm. val log2 : float -> float Base 2 logarithm. Since 4.13.0 val expm1 : float -> float expm1 x computes exp x -. 1.0 , giving numerically-accurate results even if x is close to 0.0 . val log1p : float -> float log1p x computes log(1.0 +. x) (natural logarithm), giving numerically-accurate results even if x is close to 0.0 . val cos : float -> float Cosine. Argument is in radians. val sin : float -> float Sine. Argument is in radians. val tan : float -> float Tangent. Argument is in radians. val acos : float -> float Arc cosine. The argument must fall within the range [-1.0, 1.0] . Result is in radians and is between 0.0 and pi . val asin : float -> float Arc sine. The argument must fall within the range [-1.0, 1.0] . Result is in radians and is between -pi/2 and pi/2 . val atan : float -> float Arc tangent. Result is in radians and is between -pi/2 and pi/2 . val atan2 : float -> float -> float atan2 y x returns the arc tangent of y /. x . The signs of x and y are used to determine the quadrant of the result. Result is in radians and is between -pi and pi . val hypot : float -> float -> float hypot x y returns sqrt(x *. x + y *. y) , that is, the length of the hypotenuse of a right-angled triangle with sides of length x and y , or, equivalently, the distance of the point (x,y) to origin. If one of x or y is infinite, returns infinity even if the other is nan . val cosh : float -> float Hyperbolic cosine. Argument is in radians. val sinh : float -> float Hyperbolic sine. Argument is in radians. val tanh : float -> float Hyperbolic tangent. Argument is in radians. val acosh : float -> float Hyperbolic arc cosine. The argument must fall within the range [1.0, inf] . Result is in radians and is between 0.0 and inf . Since 4.13.0 val asinh : float -> float Hyperbolic arc sine. The argument and result range over the entire real line. Result is in radians. Since 4.13.0 val atanh : float -> float Hyperbolic arc tangent. The argument must fall within the range [-1.0, 1.0] . Result is in radians and ranges over the entire real line. Since 4.13.0 val erf : float -> float Error function. The argument ranges over the entire real line. The result is always within [-1.0, 1.0] . Since 4.13.0 val erfc : float -> float Complementary error function ( erfc x = 1 - erf x ). The argument ranges over the entire real line. The result is always within [-1.0, 1.0] . Since 4.13.0 val trunc : float -> float trunc x rounds x to the nearest integer whose absolute value is less than or equal to x . Since 4.08.0 val round : float -> float round x rounds x to the nearest integer with ties (fractional values of 0.5) rounded away from zero, regardless of the current rounding direction. If x is an integer, +0. , -0. , nan , or infinite, x itself is returned. On 64-bit mingw-w64, this function may be emulated owing to a bug in the C runtime library (CRT) on this platform. Since 4.08.0 val ceil : float -> float Round above to an integer value. ceil f returns the least integer value greater than or equal to f . The result is returned as a float. val floor : float -> float Round below to an integer value. floor f returns the greatest integer value less than or equal to f . The result is returned as a float. val next_after : float -> float -> float next_after x y returns the next representable floating-point value following x in the direction of y . More precisely, if y is greater (resp. less) than x , it returns the smallest (resp. largest) representable number greater (resp. less) than x . If x equals y , the function returns y . If x or y is nan , a nan is returned. Note that next_after max_float infinity = infinity and that next_after 0. infinity is the smallest denormalized positive number. If x is the smallest denormalized positive number, next_after x 0. = 0. Since 4.08.0 val copy_sign : float -> float -> float copy_sign x y returns a float whose absolute value is that of x and whose sign is that of y . If x is nan , returns nan . If y is nan , returns either x or -. x , but it is not specified which. val sign_bit : float -> bool sign_bit x is true if and only if the sign bit of x is set. For example sign_bit 1. and signbit 0. are false while sign_bit (-1.) and sign_bit (-0.) are true . Since 4.08.0 val frexp : float -> float * int frexp f returns the pair of the significant and the exponent of f . When f is zero, the significant x and the exponent n of f are equal to zero. When f is non-zero, they are defined by f = x *. 2 ** n and 0.5 <= x < 1.0 . val ldexp : float -> int -> float ldexp x n returns x *. 2 ** n . val modf : float -> float * float modf f returns the pair of the fractional and integral part of f . type t = float An alias for the type of floating-point numbers. val compare : t -> t -> int compare x y returns 0 if x is equal to y , a negative integer if x is less than y , and a positive integer if x is greater than y . compare treats nan as equal to itself and less than any other float value. This treatment of nan ensures that compare defines a total ordering relation. val equal : t -> t -> bool The equal function for floating-point numbers, compared using Float.compare . val min : t -> t -> t min x y returns the minimum of x and y . It returns nan when x or y is nan . Moreover min (-0.) (+0.) = -0. Since 4.08.0 val max : float -> float -> float max x y returns the maximum of x and y . It returns nan when x or y is nan . Moreover max (-0.) (+0.) = +0. Since 4.08.0 val min_max : float -> float -> float * float min_max x y is (min x y, max x y) , just more efficient. Since 4.08.0 val min_num : t -> t -> t min_num x y returns the minimum of x and y treating nan as missing values. If both x and y are nan , nan is returned. Moreover min_num (-0.) (+0.) = -0. Since 4.08.0 val max_num : t -> t -> t max_num x y returns the maximum of x and y treating nan as missing values. If both x and y are nan nan is returned. Moreover max_num (-0.) (+0.) = +0. Since 4.08.0 val min_max_num : float -> float -> float * float min_max_num x y is (min_num x y, max_num x y) , just more efficient. Note that in particular min_max_num x nan = (x, x) and min_max_num nan y = (y, y) . Since 4.08.0 val hash : t -> int The hash function for floating-point numbers. module Array : sig end Float arrays with packed representation. module ArrayLabels : sig end Float arrays with packed representation (labeled functions).