Provided by: libtest-output-perl_1.034-1_all 
NAME
Test::Output - Utilities to test STDOUT and STDERR messages.
SYNOPSIS
use Test::More tests => 4;
use Test::Output;
sub writer {
print "Write out.\n";
print STDERR "Error out.\n";
}
stdout_is(\&writer,"Write out.\n",'Test STDOUT');
stderr_isnt(\&writer,"No error out.\n",'Test STDERR');
combined_is(
\&writer,
"Write out.\nError out.\n",
'Test STDOUT & STDERR combined'
);
output_is(
\&writer,
"Write out.\n",
"Error out.\n",
'Test STDOUT & STDERR'
);
# Use bare blocks.
stdout_is { print "test" } "test", "Test STDOUT";
stderr_isnt { print "bad test" } "test", "Test STDERR";
output_is { print 'STDOUT'; print STDERR 'STDERR' }
"STDOUT", "STDERR", "Test output";
DESCRIPTION
Test::Output provides a simple interface for testing output sent to "STDOUT" or "STDERR".
A number of different utilities are included to try and be as flexible as possible to the
tester.
Likewise, Capture::Tiny provides a much more robust capture mechanism without than the
original Test::Output::Tie.
TESTS
STDOUT
stdout_is
stdout_isnt
stdout_is ( $coderef, $expected, 'description' );
stdout_is { ... } $expected, 'description';
stdout_isnt( $coderef, $expected, 'description' );
stdout_isnt { ... } $expected, 'description';
"stdout_is()" captures output sent to "STDOUT" from $coderef and compares it against
$expected. The test passes if equal.
"stdout_isnt()" passes if "STDOUT" is not equal to $expected.
stdout_like
stdout_unlike
stdout_like ( $coderef, qr/$expected/, 'description' );
stdout_like { ... } qr/$expected/, 'description';
stdout_unlike( $coderef, qr/$expected/, 'description' );
stdout_unlike { ... } qr/$expected/, 'description';
"stdout_like()" captures the output sent to "STDOUT" from $coderef and compares it to
the regex in $expected. The test passes if the regex matches.
"stdout_unlike()" passes if STDOUT does not match the regex.
STDERR
stderr_is
stderr_isnt
stderr_is ( $coderef, $expected, 'description' );
stderr_is {... } $expected, 'description';
stderr_isnt( $coderef, $expected, 'description' );
stderr_isnt {... } $expected, 'description';
"stderr_is()" is similar to "stdout_is", except that it captures "STDERR". The test
passes if "STDERR" from $coderef equals $expected.
"stderr_isnt()" passes if "STDERR" is not equal to $expected.
stderr_like
stderr_unlike
stderr_like ( $coderef, qr/$expected/, 'description' );
stderr_like { ...} qr/$expected/, 'description';
stderr_unlike( $coderef, qr/$expected/, 'description' );
stderr_unlike { ...} qr/$expected/, 'description';
"stderr_like()" is similar to "stdout_like()" except that it compares the regex
$expected to "STDERR" captured from $codref. The test passes if the regex matches.
"stderr_unlike()" passes if "STDERR" does not match the regex.
COMBINED OUTPUT
combined_is
combined_isnt
combined_is ( $coderef, $expected, 'description' );
combined_is {... } $expected, 'description';
combined_isnt ( $coderef, $expected, 'description' );
combined_isnt {... } $expected, 'description';
"combined_is()" directs "STDERR" to "STDOUT" then captures "STDOUT". This is
equivalent to UNIXs "2>&1". The test passes if the combined "STDOUT" and "STDERR" from
$coderef equals $expected.
"combined_isnt()" passes if combined "STDOUT" and "STDERR" are not equal to $expected.
combined_like
combined_unlike
combined_like ( $coderef, qr/$expected/, 'description' );
combined_like { ...} qr/$expected/, 'description';
combined_unlike ( $coderef, qr/$expected/, 'description' );
combined_unlike { ...} qr/$expected/, 'description';
"combined_like()" is similar to "combined_is()" except that it compares a regex
("$expected)" to "STDOUT" and "STDERR" captured from $codref. The test passes if the
regex matches.
"combined_unlike()" passes if the combined "STDOUT" and "STDERR" does not match the
regex.
OUTPUT
output_is
output_isnt
output_is ( $coderef, $expected_stdout, $expected_stderr, 'description' );
output_is {... } $expected_stdout, $expected_stderr, 'description';
output_isnt( $coderef, $expected_stdout, $expected_stderr, 'description' );
output_isnt {... } $expected_stdout, $expected_stderr, 'description';
The "output_is()" function is a combination of the "stdout_is()" and "stderr_is()"
functions. For example:
output_is(sub {print "foo"; print STDERR "bar";},'foo','bar');
is functionally equivalent to
stdout_is(sub {print "foo";},'foo')
&& stderr_is(sub {print STDERR "bar";},'bar');
except that $coderef is only executed once.
Unlike "stdout_is()" and "stderr_is()" which ignore STDERR and STDOUT respectively,
"output_is()" requires both "STDOUT" and "STDERR" to match in order to pass. Setting
either $expected_stdout or $expected_stderr to "undef" ignores "STDOUT" or "STDERR"
respectively.
output_is(sub {print "foo"; print STDERR "bar";},'foo',undef);
is the same as
stdout_is(sub {print "foo";},'foo')
"output_isnt()" provides the opposite function of "output_is()". It is a combination
of "stdout_isnt()" and "stderr_isnt()".
output_isnt(sub {print "foo"; print STDERR "bar";},'bar','foo');
is functionally equivalent to
stdout_isnt(sub {print "foo";},'bar')
&& stderr_isnt(sub {print STDERR "bar";},'foo');
As with "output_is()", setting either $expected_stdout or $expected_stderr to "undef"
ignores the output to that facility.
output_isnt(sub {print "foo"; print STDERR "bar";},undef,'foo');
is the same as
stderr_is(sub {print STDERR "bar";},'foo')
output_like
output_unlike
output_like ( $coderef, $regex_stdout, $regex_stderr, 'description' );
output_like { ... } $regex_stdout, $regex_stderr, 'description';
output_unlike( $coderef, $regex_stdout, $regex_stderr, 'description' );
output_unlike { ... } $regex_stdout, $regex_stderr, 'description';
"output_like()" and "output_unlike()" follow the same principles as "output_is()" and
"output_isnt()" except they use a regular expression for matching.
"output_like()" attempts to match $regex_stdout and $regex_stderr against "STDOUT" and
"STDERR" produced by $coderef. The test passes if both match.
output_like(sub {print "foo"; print STDERR "bar";},qr/foo/,qr/bar/);
The above test is successful.
Like "output_is()", setting either $regex_stdout or $regex_stderr to "undef" ignores
the output to that facility.
output_like(sub {print "foo"; print STDERR "bar";},qr/foo/,undef);
is the same as
stdout_like(sub {print "foo"; print STDERR "bar";},qr/foo/);
"output_unlike()" test pass if output from $coderef doesn't match $regex_stdout and
$regex_stderr.
EXPORTS
By default, all subroutines are exported by default.
• :stdout - the subs with "stdout" in the name.
• :stderr - the subs with "stderr" in the name.
• :functions - the subs with "_from" at the end.
• :output - the subs with "output" in the name.
• :combined - the subs with "combined" in the name.
• :tests - everything that outputs TAP
• :all - everything (which is the same as the default)
FUNCTIONS
stdout_from
my $stdout = stdout_from($coderef)
my $stdout = stdout_from { ... };
stdout_from() executes $coderef and captures STDOUT.
stderr_from
my $stderr = stderr_from($coderef)
my $stderr = stderr_from { ... };
"stderr_from()" executes $coderef and captures "STDERR".
output_from
my ($stdout, $stderr) = output_from($coderef)
my ($stdout, $stderr) = output_from {...};
"output_from()" executes $coderef one time capturing both "STDOUT" and "STDERR".
combined_from
my $combined = combined_from($coderef);
my $combined = combined_from {...};
"combined_from()" executes $coderef one time combines "STDOUT" and "STDERR", and captures
them. "combined_from()" is equivalent to using "2>&1" in UNIX.
AUTHOR
Currently maintained by brian d foy, "bdfoy@cpan.org".
Shawn Sorichetti, "<ssoriche@cpan.org>"
SOURCE AVAILABILITY
This module is in Github:
http://github.com/briandfoy/test-output
BUGS
Please report any bugs or feature requests to "bug-test-output@rt.cpan.org", or through
the web interface at <http://rt.cpan.org>. I will be notified, and then you'll
automatically be notified of progress on your bug as I make changes.
ACKNOWLEDGEMENTS
Thanks to chromatic whose TieOut.pm was the basis for capturing output.
Also thanks to rjbs for his help cleaning the documentation, and pushing me to
Sub::Exporter. (This feature has been removed since it uses none of Sub::Exporter's
strengths).
Thanks to David Wheeler for providing code block support and tests.
Thanks to Michael G Schwern for the solution to combining "STDOUT" and "STDERR".
COPYRIGHT & LICENSE
Copyright 2005-2021 Shawn Sorichetti, All Rights Reserved.
This module is licensed under the Artistic License 2.0.