Provided by: libncarg-dev_6.6.2.dfsg.1-2_amd64 
NAME
Conrec_family_params - Includes a brief description of all Conrec_family internal
parameters.
DESCRIPTION
No parameter setting functions are available for the Conrec_family utility. Parameters
were set through common blocks CONRE1 and CONRE4. There are three versions of the CONREC
code. The normal version is in the standard NCAR Graphics library. The other two
versions are in optional libraries one of which is linked when the ncargf77 option -quick,
or -super is declared on the command line.
The CONREC and EZCNTR entries can be invoked in four different ways to create contour
plots which vary considerably in appearance. The four variations include quick, normal,
smooth, and super contour lines. This progression represents a tradeoff between speed of
computation and the appearance of the contour plots. These variations are specified
through selected command line options of the ncargf77 command.
For normal or smooth options the parameter set is:
COMMON /CONRE1/ IOFFP ,SPVAL
COMMON /CONRE4/ ISIZEL ,ISIZEM ,ISIZEP ,NREP ,
1 NCRT ,ILAB ,NULBLL ,IOFFD ,
2 EXT ,IOFFM ,ISOLID ,NLA ,
3 NLM ,XLT ,YBT ,SIDE
For the quick option the parameter set is:
COMMON /CONRE1/ IOFFP ,SPVAL
COMMON /CONRE4/ ISIZEM ,ISIZEP ,NLA ,NLM ,
1 XLT ,YBT ,SIDE ,ISOLID ,
2 EXT ,IOFFD ,IOFFM
For the super option the parameter set is:
COMMON /CONRE1/ IOFFP ,SPVAL ,IHILO
DATA ISIZEL,ISIZEM,ISIZEP,NLA,NLM,XLT,YBT,SIDE,ISOLID,NREP,NCRT/
1 1, 2, 0, 16, 40,.05,.05, .9, 1023, 6, 4/
DATA EXT,IOFFD,NULBLL,IOFFM,ILAB/.25,0,3,0,1/
Definitions of the inclusive set follow:
ISIZEL Size of line labels in Plotter Address Units (PAUs).
0 = 8 PAUs, 1 = 12 PAUs, 2 = 16 PAUs, 3 = 24 PAUs,
> 3 means use this number of PAUs. [Default = 1]
ISIZEM Size of labels for minimums and maximums, as per
the size definitions given for ISIZEL.
[Default = 2]
ISIZEP Size of labels for data point values as per the
size definitions given for ISIZEL. [Default = 0]
NLA Approximate number of contour levels when
internally generated. [Default = 16]
NLM Maximum number of contour levels. If this is to be
increased, the dimensions of CL and RWORK in conrec.f
must be increased by the same amount. [Default = 40]
XLT Left hand edge of the plot (0.0 is the left edge of
the frame and 1.0 is the right edge of the frame.)
[Default = .05]
YBT Bottom edge of the plot (0.0 is the bottom of the
frame and 1.0 is the top of the frame.)
[Default = .05]
SIDE Length of longer edge of plot (see also EXT).
[Default = .90]
NREP Number of repetitions of the dash pattern between
line labels. [Default = 6]
NCRT Number of CRT units per element (bit) in the dash
pattern. [Default = 4]
ILAB Flag to control the drawing of line labels.
- ILAB non-zero means label the lines.
- ILAB = 0 means do not label the lines.
[Default = 1]
NULBUL Number of unlabeled lines between labeled lines.
For example, when NULBLL = 3, every fourth level
is labeled. [Default = 3]
IOFFD Flag to control normalization of label numbers.
- IOFFD = 0 means include decimal point when
possible (do not normalize unless required).
- IOFFD non-zero means normalize all label
numbers and output a scale factor in the
message below the graph. [Default = 0]
EXT Lengths of the sides of the plot are proportional
to M and N (when CONREC sets the window and viewport).
In extreme cases, when MIN(M,N)/MAX(M,N) is less
than EXT, Conrec produces a square plot.
[Default = .25]
IOFFP Flag to control special value feature.
- IOFFP = 0 means the special value feature is
not in use.
- IOFFP non-zero means the special value feature
is in use. (SPVAL is set to the special value.)
Contour lines will then be omitted from any cell
with any corner equal to the special value.
[Default = 0]
SPVAL Contains the special value when IOFFP is non-zero.
[Default = 0.]
IOFFM Flag to control the message below the plot.
- IOFFM = 0 if the message is to be plotted.
- IOFFM non-zero if the message is to be omitted.
[Default = 0]
ISOLID Dash pattern for non-negative contour lines.
[Default = 1023]
SEE ALSO
Online: conrec_family, conpack, conpack_params, ezcntr, conrec Hardcopy: NCAR Graphics
Contouring and Mapping Tutorial; NCAR Graphics Fundamentals, UNIX Version; User's Guide
for NCAR GKS-0A Graphics
COPYRIGHT
Copyright (C) 1987-2009
University Corporation for Atmospheric Research
The use of this Software is governed by a License Agreement.