Provided by: cmake-data_3.27.4-1_all bug

NAME

       cmake-variables - CMake Variables Reference

       This page documents variables that are provided by CMake or have meaning to CMake when set
       by project code.

       For general information on variables, see the  Variables  section  in  the  cmake-language
       manual.

       NOTE:
          CMake reserves identifiers that:

          • begin with CMAKE_ (upper-, lower-, or mixed-case), or

          • begin with _CMAKE_ (upper-, lower-, or mixed-case), or

          • begin with _ followed by the name of any CMake Command.

VARIABLES THAT PROVIDE INFORMATION

   CMAKE_AR
       Name of archiving tool for static libraries.

       This specifies the name of the program that creates archive or static libraries.

   CMAKE_ARGC
       Number of command line arguments passed to CMake in script mode.

       When  run  in  -P  script  mode,  CMake  sets  this variable to the number of command line
       arguments.  See also CMAKE_ARGV0, 1, 2 ...

   CMAKE_ARGV0
       Command line argument passed to CMake in script mode.

       When run in -P script mode, CMake sets this variable to the first command  line  argument.
       It  then  also  sets  CMAKE_ARGV1, CMAKE_ARGV2, ... and so on, up to the number of command
       line arguments given.  See also CMAKE_ARGC.

   CMAKE_BINARY_DIR
       The path to the top level of the build tree.

       This is the full path to the top level of the current CMake build tree.  For an  in-source
       build, this would be the same as CMAKE_SOURCE_DIR.

       When   run   in   cmake  -P  script  mode,  CMake  sets  the  variables  CMAKE_BINARY_DIR,
       CMAKE_SOURCE_DIR, CMAKE_CURRENT_BINARY_DIR and  CMAKE_CURRENT_SOURCE_DIR  to  the  current
       working directory.

   CMAKE_BUILD_TOOL
       This  variable  exists  only  for  backwards compatibility.  It contains the same value as
       CMAKE_MAKE_PROGRAM.  Use that variable instead.

   CMAKE_CACHE_MAJOR_VERSION
       Major version of CMake used to create the CMakeCache.txt file

       This stores the major version of CMake used to write a  CMake  cache  file.   It  is  only
       different when a different version of CMake is run on a previously created cache file.

   CMAKE_CACHE_MINOR_VERSION
       Minor version of CMake used to create the CMakeCache.txt file

       This  stores  the  minor  version  of  CMake used to write a CMake cache file.  It is only
       different when a different version of CMake is run on a previously created cache file.

   CMAKE_CACHE_PATCH_VERSION
       Patch version of CMake used to create the CMakeCache.txt file

       This stores the patch version of CMake used to write a  CMake  cache  file.   It  is  only
       different when a different version of CMake is run on a previously created cache file.

   CMAKE_CACHEFILE_DIR
       This  variable  is  used  internally  by  CMake,  and  may  not  be  set  during the first
       configuration of a build tree.  When it is set, it has the same value as CMAKE_BINARY_DIR.
       Use that variable instead.

   CMAKE_CFG_INTDIR
       Deprecated  since  version 3.21: This variable has poor support on Ninja Multi-Config, and
       predates the existence of the $<CONFIG> generator expression. Use $<CONFIG> instead.

       Build-time reference to per-configuration output subdirectory.

       For native build systems supporting multiple configurations in the  build  tree  (such  as
       Visual  Studio  Generators  and  Xcode), the value is a reference to a build-time variable
       specifying the name of the per-configuration output subdirectory.  On Makefile  Generators
       this  evaluates  to  .  because  there is only one configuration in a build tree.  Example
       values:

          $(ConfigurationName) = Visual Studio 9
          $(Configuration)     = Visual Studio 11 and above
          $(CONFIGURATION)     = Xcode
          .                    = Make-based tools
          .                    = Ninja
          ${CONFIGURATION}     = Ninja Multi-Config

       Since these values are evaluated by the native build system,  this  variable  is  suitable
       only  for  use in command lines that will be evaluated at build time.  Example of intended
       usage:

          add_executable(mytool mytool.c)
          add_custom_command(
            OUTPUT out.txt
            COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool
                    ${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt
            DEPENDS mytool in.txt
            )
          add_custom_target(drive ALL DEPENDS out.txt)

       Note that CMAKE_CFG_INTDIR is no longer necessary for this purpose but has been  left  for
       compatibility  with existing projects.  Instead add_custom_command() recognizes executable
       target         names         in          its          COMMAND          option,          so
       ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool can be replaced by just mytool.

       This  variable  is  read-only.   Setting it is undefined behavior.  In multi-configuration
       build systems the value of this variable is passed as the  value  of  preprocessor  symbol
       CMAKE_INTDIR to the compilation of all source files.

   CMAKE_COMMAND
       The full path to the cmake(1) executable.

       This  is  the  full  path  to  the  CMake  executable cmake(1) which is useful from custom
       commands that want to use the  cmake  -E  option  for  portable  system  commands.   (e.g.
       /usr/local/bin/cmake)

   CMAKE_CPACK_COMMAND
       New in version 3.13.

       Full path to cpack(1) command installed with CMake.

       This  is  the  full  path  to  the  CPack  executable cpack(1) that can be used for custom
       commands or tests to invoke CPack commands.

   CMAKE_CROSSCOMPILING
       This variable is set by CMake  to  indicate  whether  it  is  cross  compiling,  but  note
       limitations discussed below.

       This  variable will be set to true by CMake if the CMAKE_SYSTEM_NAME variable has been set
       manually (i.e. in a toolchain file or as a cache entry from the cmake  command  line).  In
       most  cases,  manually  setting  CMAKE_SYSTEM_NAME  will only be done when cross compiling
       since, if not manually set, it will be given the  same  value  as  CMAKE_HOST_SYSTEM_NAME,
       which  is correct for the non-cross-compiling case. In the event that CMAKE_SYSTEM_NAME is
       manually set to the same value as CMAKE_HOST_SYSTEM_NAME, then  CMAKE_CROSSCOMPILING  will
       still be set to true.

       Another  case to be aware of is that builds targeting Apple platforms other than macOS are
       handled  differently  to  other  cross  compiling  scenarios.  Rather  than   relying   on
       CMAKE_SYSTEM_NAME to select the target platform, Apple device builds use CMAKE_OSX_SYSROOT
       to  select  the  appropriate  SDK,  which  indirectly  determines  the  target   platform.
       Furthermore,  when  using  the  Xcode  generator, developers can switch between device and
       simulator builds at build time rather than having a single choice at  configure  time,  so
       the concept of whether the build is cross compiling or not is more complex. Therefore, the
       use of CMAKE_CROSSCOMPILING is not recommended for projects targeting Apple devices.

   CMAKE_CROSSCOMPILING_EMULATOR
       New in version 3.3.

       This variable is only used when CMAKE_CROSSCOMPILING is on. It should point to  a  command
       on the host system that can run executable built for the target system.

       New  in version 3.15: If this variable contains a semicolon-separated list, then the first
       value is the command and remaining values are its arguments.

       The command will be used to run  try_run()  generated  executables,  which  avoids  manual
       population of the TryRunResults.cmake file.

       It  is  also  used as the default value for the CROSSCOMPILING_EMULATOR target property of
       executables.

   CMAKE_CTEST_COMMAND
       Full path to ctest(1) command installed with CMake.

       This is the full path to the CTest  executable  ctest(1)  that  can  be  used  for  custom
       commands or tests to invoke CTest commands.

   CMAKE_CURRENT_BINARY_DIR
       The path to the binary directory currently being processed.

       This  is  the full path to the build directory that is currently being processed by cmake.
       Each directory added by add_subdirectory() will create a binary  directory  in  the  build
       tree,  and  as it is being processed this variable will be set.  For in-source builds this
       is the current source directory being processed.

       When  run  in  cmake  -P  script  mode,  CMake  sets   the   variables   CMAKE_BINARY_DIR,
       CMAKE_SOURCE_DIR,  CMAKE_CURRENT_BINARY_DIR  and  CMAKE_CURRENT_SOURCE_DIR  to the current
       working directory.

   CMAKE_CURRENT_FUNCTION
       New in version 3.17.

       When executing code inside a function(), this variable contains the name  of  the  current
       function.  It can be useful for diagnostic or debug messages.

       See    also    CMAKE_CURRENT_FUNCTION_LIST_DIR,    CMAKE_CURRENT_FUNCTION_LIST_FILE    and
       CMAKE_CURRENT_FUNCTION_LIST_LINE.

   CMAKE_CURRENT_FUNCTION_LIST_DIR
       New in version 3.17.

       When executing code inside a function(), this variable contains the full directory of  the
       listfile that defined the current function.

       It  is  quite  common  practice in CMake for modules to use some additional files, such as
       templates to be copied in after substituting CMake variables.  In such cases,  a  function
       needs  to  know  where  to  locate  those  files in a way that doesn't depend on where the
       function is called.  Without CMAKE_CURRENT_FUNCTION_LIST_DIR, the code to  do  that  would
       typically use the following pattern:

          set(_THIS_MODULE_BASE_DIR "${CMAKE_CURRENT_LIST_DIR}")

          function(foo)
            configure_file(
              "${_THIS_MODULE_BASE_DIR}/some.template.in"
              some.output
            )
          endfunction()

       Using  CMAKE_CURRENT_FUNCTION_LIST_DIR inside the function instead eliminates the need for
       the extra variable which would otherwise be visible outside  the  function's  scope.   The
       above example can be written in the more concise and more robust form:

          function(foo)
            configure_file(
              "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/some.template.in"
              some.output
            )
          endfunction()

       See       also      CMAKE_CURRENT_FUNCTION,      CMAKE_CURRENT_FUNCTION_LIST_FILE      and
       CMAKE_CURRENT_FUNCTION_LIST_LINE.

   CMAKE_CURRENT_FUNCTION_LIST_FILE
       New in version 3.17.

       When executing code inside a function(), this variable  contains  the  full  path  to  the
       listfile that defined the current function.

       See       also       CMAKE_CURRENT_FUNCTION,      CMAKE_CURRENT_FUNCTION_LIST_DIR      and
       CMAKE_CURRENT_FUNCTION_LIST_LINE.

   CMAKE_CURRENT_FUNCTION_LIST_LINE
       New in version 3.17.

       When executing code inside a function(), this variable contains the  line  number  in  the
       listfile where the current function was defined.

       See       also       CMAKE_CURRENT_FUNCTION,      CMAKE_CURRENT_FUNCTION_LIST_DIR      and
       CMAKE_CURRENT_FUNCTION_LIST_FILE.

   CMAKE_CURRENT_LIST_DIR
       Full directory of the listfile currently being processed.

       As CMake processes the listfiles in your project this variable will always be set  to  the
       directory  where the listfile which is currently being processed (CMAKE_CURRENT_LIST_FILE)
       is located.  The value has dynamic scope.  When CMake  starts  processing  commands  in  a
       source file it sets this variable to the directory where this file is located.  When CMake
       finishes processing commands from the file it restores the previous value.  Therefore  the
       value of the variable inside a macro or function is the directory of the file invoking the
       bottom-most entry on the call stack, not the directory of the file containing the macro or
       function definition.

       See also CMAKE_CURRENT_LIST_FILE.

   CMAKE_CURRENT_LIST_FILE
       Full path to the listfile currently being processed.

       As  CMake  processes the listfiles in your project this variable will always be set to the
       one currently being processed.  The value has dynamic scope.  When CMake starts processing
       commands  in  a source file it sets this variable to the location of the file.  When CMake
       finishes processing commands from the file it restores the previous value.  Therefore  the
       value  of  the  variable  inside  a macro or function is the file invoking the bottom-most
       entry on the call stack, not the file containing the macro or function definition.

       See also CMAKE_PARENT_LIST_FILE.

   CMAKE_CURRENT_LIST_LINE
       The line number of the current file being processed.

       This is the line number of the file currently being processed by cmake.

       If CMake is currently processing deferred calls  scheduled  by  the  cmake_language(DEFER)
       command, this variable evaluates to DEFERRED instead of a specific line number.

   CMAKE_CURRENT_SOURCE_DIR
       The path to the source directory currently being processed.

       This is the full path to the source directory that is currently being processed by cmake.

       When   run   in   cmake  -P  script  mode,  CMake  sets  the  variables  CMAKE_BINARY_DIR,
       CMAKE_SOURCE_DIR, CMAKE_CURRENT_BINARY_DIR and  CMAKE_CURRENT_SOURCE_DIR  to  the  current
       working directory.

   CMAKE_DEBUG_TARGET_PROPERTIES
       Enables tracing output for target properties.

       This variable can be populated with a list of properties to generate debug output for when
       evaluating target properties.  Currently it can only be used when evaluating:

       • AUTOUIC_OPTIONSCOMPILE_DEFINITIONSCOMPILE_FEATURESCOMPILE_OPTIONSINCLUDE_DIRECTORIESLINK_DIRECTORIESLINK_OPTIONSPOSITION_INDEPENDENT_CODESOURCES

       target properties and any other property listed in COMPATIBLE_INTERFACE_STRING  and  other
       COMPATIBLE_INTERFACE_  properties.   It  outputs  an  origin  for each entry in the target
       property.  Default is unset.

   CMAKE_DIRECTORY_LABELS
       New in version 3.10.

       Specify labels for the current directory.

       This is used to initialize the LABELS directory property.

   CMAKE_DL_LIBS
       Name of library containing dlopen and dlclose.

       The name of the library that has dlopen and dlclose in  it,  usually  -ldl  on  most  UNIX
       machines.

   CMAKE_DOTNET_SDK
       New in version 3.23.

       Default value for DOTNET_SDK property of targets.

       This  variable  is  used  to  initialize  the DOTNET_SDK property on all targets. See that
       target property for additional information.

   CMAKE_DOTNET_TARGET_FRAMEWORK
       New in version 3.17.

       Default value for DOTNET_TARGET_FRAMEWORK property  of targets.

       This variable is used to initialize the DOTNET_TARGET_FRAMEWORK property on  all  targets.
       See that target property for additional information.

       Setting CMAKE_DOTNET_TARGET_FRAMEWORK may be necessary when working with C# and newer .NET
       framework versions to avoid referencing errors with the ALL_BUILD CMake target.

       This variable is only evaluated for Visual Studio Generators VS 2010 and above.

   CMAKE_DOTNET_TARGET_FRAMEWORK_VERSION
       New in version 3.12.

       Default value for DOTNET_TARGET_FRAMEWORK_VERSION property of targets.

       This variable is used to initialize the DOTNET_TARGET_FRAMEWORK_VERSION  property  on  all
       targets.    See   that   target   property   for   additional   information.   When   set,
       CMAKE_DOTNET_TARGET_FRAMEWORK takes precednece over this variable. See  that  variable  or
       the associated target property DOTNET_TARGET_FRAMEWORK for additional information.

       Setting  CMAKE_DOTNET_TARGET_FRAMEWORK_VERSION  may  be necessary when working with C# and
       newer .NET framework versions to avoid referencing errors with the ALL_BUILD CMake target.

       This variable is only evaluated for Visual Studio Generators VS 2010 and above.

   CMAKE_EDIT_COMMAND
       Full path to cmake-gui(1) or ccmake(1).  Defined only for Makefile  Generators  and  Ninja
       Generators when not using any Extra Generators.

       This  is  the  full path to the CMake executable that can graphically edit the cache.  For
       example, cmake-gui(1) or ccmake(1).

   CMAKE_EXECUTABLE_SUFFIX
       The suffix for executables on this platform.

       The suffix to use for the end of an executable filename if any, .exe on Windows.

       CMAKE_EXECUTABLE_SUFFIX_<LANG> overrides this for language <LANG>.

   CMAKE_EXECUTABLE_SUFFIX_<LANG>
       The suffix to use for the  end  of  an  executable  filename  of  <LANG>  compiler  target
       architecture, if any.

       It overrides CMAKE_EXECUTABLE_SUFFIX for language <LANG>.

   CMAKE_EXTRA_GENERATOR
       Deprecated  since  version  3.27:  Support  for Extra Generators is deprecated and will be
       removed from a future version of CMake.   IDEs  may  use  the  cmake-file-api(7)  to  view
       CMake-generated project build trees.

       The extra generator used to build the project.  See cmake-generators(7).

       When  using the Eclipse, CodeBlocks, CodeLite, Kate or Sublime generators, CMake generates
       Makefiles (CMAKE_GENERATOR) and additionally project files for the respective  IDE.   This
       IDE project file generator is stored in CMAKE_EXTRA_GENERATOR (e.g.  Eclipse CDT4).

   CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
       Additional suffixes for shared libraries.

       Extensions  for shared libraries other than that specified by CMAKE_SHARED_LIBRARY_SUFFIX,
       if any.  CMake uses this to recognize external shared library  files  during  analysis  of
       libraries linked by a target.

   CMAKE_FIND_DEBUG_MODE
       New in version 3.17.

       Print extra find call information for the following commands to standard error:

       • find_program()find_library()find_file()find_path()find_package()

       Output  is  designed for human consumption and not for parsing.  Enabling this variable is
       equivalent to using cmake --debug-find with the added ability to enable  debugging  for  a
       subset of find calls.

          set(CMAKE_FIND_DEBUG_MODE TRUE)
          find_program(...)
          set(CMAKE_FIND_DEBUG_MODE FALSE)

       Default is unset.

   CMAKE_FIND_PACKAGE_NAME
       New in version 3.1.1.

       Defined  by  the  find_package()  command  while  loading  a  find  module  to  record the
       caller-specified package name.  See command documentation for details.

   CMAKE_FIND_PACKAGE_REDIRECTS_DIR
       New in version 3.24.

       This read-only variable specifies a directory that the find_package() command  will  check
       first  before  searching  anywhere  else  for  a  module or config package file.  A config
       package file in this directory will always be found in preference to any other Find module
       file or config package file.

       The  primary  purpose of this variable is to facilitate integration between find_package()
       and  FetchContent_MakeAvailable().   The  latter  command  may   create   files   in   the
       CMAKE_FIND_PACKAGE_REDIRECTS_DIR  directory  when  it populates a dependency.  This allows
       subsequent calls to find_package()  for  the  same  dependency  to  re-use  the  populated
       contents instead of trying to satisfy the dependency from somewhere external to the build.
       Projects may also want to  write  files  into  this  directory  in  some  situations  (see
       Integrating With find_package() for examples).

       The  directory  that  CMAKE_FIND_PACKAGE_REDIRECTS_DIR points to will always be erased and
       recreated empty at the start of every CMake run.  Any files written  into  this  directory
       during the CMake run will be lost the next time CMake configures the project.

       CMAKE_FIND_PACKAGE_REDIRECTS_DIR  is  only  set in CMake project mode.  It is not set when
       CMake is run in script mode (i.e. cmake -P).

   CMAKE_FIND_PACKAGE_SORT_DIRECTION
       New in version 3.7.

       The sorting direction used by CMAKE_FIND_PACKAGE_SORT_ORDER.  It can  assume  one  of  the
       following values:

       DEC    Default.   Ordering  is  done in descending mode.  The highest folder found will be
              tested first.

       ASC    Ordering is done in ascending mode.  The lowest folder found will be tested first.

       If CMAKE_FIND_PACKAGE_SORT_ORDER is not set or is set to NONE this variable has no effect.

   CMAKE_FIND_PACKAGE_SORT_ORDER
       New in version 3.7.

       The default order for sorting packages found using find_package().  It can assume  one  of
       the following values:

       NONE   Default.   No attempt is done to sort packages.  The first valid package found will
              be selected.

       NAME   Sort packages lexicographically before selecting one.

       NATURAL
              Sort packages using natural  order  (see  strverscmp(3)  manual),  i.e.  such  that
              contiguous digits are compared as whole numbers.

       Natural  sorting  can  be employed to return the highest version when multiple versions of
       the same library are found by find_package().  For  example  suppose  that  the  following
       libraries have been found:

       • libX-1.1.0

       • libX-1.2.9

       • libX-1.2.10

       By  setting  NATURAL  order  we  can  select  the  one  with  the  highest  version number
       libX-1.2.10.

          set(CMAKE_FIND_PACKAGE_SORT_ORDER NATURAL)
          find_package(libX CONFIG)

       The sort direction can be controlled using the CMAKE_FIND_PACKAGE_SORT_DIRECTION  variable
       (by default decrescent, e.g. lib-B will be tested before lib-A).

   CMAKE_GENERATOR
       The generator used to build the project.  See cmake-generators(7).

       The  name  of  the  generator that is being used to generate the build files.  (e.g.  Unix
       Makefiles, Ninja, etc.)

       The value of this variable should never be modified by project code.  A generator  may  be
       selected   via   the   cmake   -G  option,  interactively  in  cmake-gui(1),  or  via  the
       CMAKE_GENERATOR environment variable.

   CMAKE_GENERATOR_INSTANCE
       New in version 3.11.

       Generator-specific instance specification provided by user.

       Some CMake generators support selection of an instance of the  native  build  system  when
       multiple instances are available.  If the user specifies an instance (e.g. by setting this
       cache entry or via the CMAKE_GENERATOR_INSTANCE environment variable), or after a  default
       instance  is  chosen when a build tree is first configured, the value will be available in
       this variable.

       The value of this variable should never be modified by project  code.   A  toolchain  file
       specified  by the CMAKE_TOOLCHAIN_FILE variable may initialize CMAKE_GENERATOR_INSTANCE as
       a cache entry.  Once a given build tree has been initialized with a particular  value  for
       this variable, changing the value has undefined behavior.

       Instance specification is supported only on specific generators.

   Visual Studio Instance Selection
       Visual  Studio Generators support instance specification for Visual Studio 2017 and above.
       The CMAKE_GENERATOR_INSTANCE variable may be set as a cache entry selecting an instance of
       Visual Studio via one of the following forms:

       • locationlocation[,key=value]*key=value[,key=value]*

       The   location  specifies  the  absolute  path  to  the  top-level  directory  of  the  VS
       installation.

       The key=value pairs form a comma-separated list of  options  to  specify  details  of  the
       instance selection.  Supported pairs are:

       version=<major>.<minor>.<date>.<build>
              New in version 3.23.

              Specify the 4-component VS Build Version, a.k.a. Build Number.

              The components are:

              <major>.<minor>
                 The  VS  major  and  minor  version  numbers.  These are the same as the release
                 version numbers.

              <date>
                 A build date in the format MMMDD, where MMM is a month index since an epoch used
                 by Microsoft, and DD is a day in that month.

              <build>
                 A build index on the day represented by <date>.

              The  build  number  is reported by vswhere as installationVersion.  For example, VS
              16.11.10 has build number 16.11.32126.315.

       New in version 3.23: A portable VS instance, which is  not  known  to  the  Visual  Studio
       Installer, may be specified by providing both location and version=.

       If  the  value  of  CMAKE_GENERATOR_INSTANCE  is not specified explicitly by the user or a
       toolchain file, CMake queries the Visual Studio Installer to locate VS instances,  chooses
       one,  and  sets  the  variable  as  a  cache  entry to hold the value persistently.  If an
       environment variable of the form VS##0COMNTOOLS, where ## the Visual Studio major  version
       number,  is  set and points to the Common7/Tools directory within one of the VS instances,
       that instance will be used.  Otherwise, if more than one VS instance is  installed  we  do
       not define which one is chosen by default.

       The   VS   version   build  number  of  the  selected  VS  instance  is  provided  in  the
       CMAKE_VS_VERSION_BUILD_NUMBER variable.

   CMAKE_GENERATOR_PLATFORM
       New in version 3.1.

       Generator-specific target platform specification provided by user.

       Some CMake generators support a target platform name to  be  given  to  the  native  build
       system  to  choose  a compiler toolchain.  If the user specifies a platform name (e.g. via
       the cmake -A option or via the CMAKE_GENERATOR_PLATFORM environment  variable)  the  value
       will be available in this variable.

       The  value  of  this  variable should never be modified by project code.  A toolchain file
       specified by the CMAKE_TOOLCHAIN_FILE variable  may  initialize  CMAKE_GENERATOR_PLATFORM.
       Once  a  given  build tree has been initialized with a particular value for this variable,
       changing the value has undefined behavior.

       Platform specification is supported only on specific generators:

       • For Visual  Studio  Generators  with  VS  2005  and  above  this  specifies  the  target
         architecture.

       • For Green Hills MULTI this specifies the target architecture.

       See native build system documentation for allowed platform names.

   Visual Studio Platform Selection
       The Visual Studio Generators support platform specification using one of these forms:

       • platformplatform[,key=value]*key=value[,key=value]*

       The  platform  specifies the target platform (VS target architecture), such as x64, ARM64,
       or Win32.  The selected platform name is provided in the CMAKE_VS_PLATFORM_NAME variable.

       The key=value pairs form a comma-separated list of options to  specify  generator-specific
       details of the platform selection.  Supported pairs are:

       version=<version>
              New in version 3.27.

              Specify  the  Windows  SDK  version to use.  This is supported by VS 2015 and above
              when   targeting   Windows   or   Windows    Store.     CMake    will    set    the
              CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION variable to the selected SDK version.

              The <version> may be one of:

              10.0   Specify  that  any  10.0 SDK version may be used, and let Visual Studio pick
                     one.  This is supported by VS 2019 and above.

              10.0.<build>.<increment>
                     Specify  the  exact  4-component  SDK  version,  e.g.,  10.0.19041.0.    The
                     specified version of the SDK must be installed.  It may not exceed the value
                     of CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION_MAXIMUM,  if  that  variable  is
                     set.

              8.1    Specify  the  8.1  SDK version.  This is always supported by VS 2015.  On VS
                     2017 and above the 8.1 SDK must be installed.

              If the version field is not specified, CMake selects a version as described in  the
              CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION variable documentation.

   CMAKE_GENERATOR_TOOLSET
       Native build system toolset specification provided by user.

       Some  CMake generators support a toolset specification to tell the native build system how
       to choose a compiler.  If the user specifies a toolset (e.g. via the cmake  -T  option  or
       via  the CMAKE_GENERATOR_TOOLSET environment variable) the value will be available in this
       variable.

       The value of this variable should never be modified by project  code.   A  toolchain  file
       specified  by  the  CMAKE_TOOLCHAIN_FILE  variable may initialize CMAKE_GENERATOR_TOOLSET.
       Once a given build tree has been initialized with a particular value  for  this  variable,
       changing the value has undefined behavior.

       Toolset specification is supported only on specific generators:

       • Visual Studio Generators for VS 2010 and above

       • The Xcode generator for Xcode 3.0 and above

       • The Green Hills MULTI generator

       See native build system documentation for allowed toolset names.

   Visual Studio Toolset Selection
       The Visual Studio Generators support toolset specification using one of these forms:

       • toolsettoolset[,key=value]*key=value[,key=value]*

       The  toolset  specifies  the  toolset  name.  The selected toolset name is provided in the
       CMAKE_VS_PLATFORM_TOOLSET variable.

       The key=value pairs form a comma-separated list of options to  specify  generator-specific
       details of the toolset selection.  Supported pairs are:

       cuda=<version>|<path>
              Specify  the  CUDA  toolkit version to use or the path to a standalone CUDA toolkit
              directory.  Supported by VS 2010 and above. The version can only be used  with  the
              CUDA     toolkit     VS     integration     globally     installed.      See    the
              CMAKE_VS_PLATFORM_TOOLSET_CUDA    and     CMAKE_VS_PLATFORM_TOOLSET_CUDA_CUSTOM_DIR
              variables.

       host=<arch>
              Specify the host tools architecture as x64 or x86.  Supported by VS 2013 and above.
              See the CMAKE_VS_PLATFORM_TOOLSET_HOST_ARCHITECTURE variable.

       version=<version>
              Specify the toolset version to use.  Supported  by  VS  2017  and  above  with  the
              specified toolset installed.  See the CMAKE_VS_PLATFORM_TOOLSET_VERSION variable.

       VCTargetsPath=<path>
              Specify  an  alternative VCTargetsPath value for Visual Studio project files.  This
              allows use of VS platform extension configuration files (.props and .targets)  that
              are not installed with VS.

   Visual Studio Toolset Customization
       These  are  unstable  interfaces  with  no compatibility guarantees because they hook into
       undocumented internal  CMake  implementation  details.   Institutions  may  use  these  to
       internally  maintain support for non-public Visual Studio platforms and toolsets, but must
       accept responsibility to make updates as changes are made to CMake.

       Additional key=value pairs are available:

       customFlagTableDir=<path>
              New in version 3.21.

              Specify the absolute path to a directory from which  to  load  custom  flag  tables
              stored     as     JSON     documents     with    file    names    of    the    form
              <platform>_<toolset>_<tool>.json or <platform>_<tool>.json, where <platform> is the
              CMAKE_VS_PLATFORM_NAME,  <toolset>  is the CMAKE_VS_PLATFORM_TOOLSET, and <tool> is
              the tool for which the flag table is meant.  This naming  pattern  is  an  internal
              CMake implementation detail.  The <tool> names are undocumented.  The format of the
              .json flag table files is undocumented.

   CMAKE_IMPORT_LIBRARY_PREFIX
       The prefix for import libraries that you link to.

       The prefix to use for the name of an import library if used on this platform.

       CMAKE_IMPORT_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.

   CMAKE_IMPORT_LIBRARY_SUFFIX
       The suffix for import libraries that you link to.

       The suffix to use for the end of an import library filename if used on this platform.

       CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.

   CMAKE_JOB_POOL_COMPILE
       This variable is used to initialize the JOB_POOL_COMPILE property on all the targets.  See
       JOB_POOL_COMPILE for additional information.

   CMAKE_JOB_POOL_LINK
       This  variable  is  used  to initialize the JOB_POOL_LINK property on all the targets. See
       JOB_POOL_LINK for additional information.

   CMAKE_JOB_POOL_PRECOMPILE_HEADER
       New in version 3.17.

       This variable is used to initialize the JOB_POOL_PRECOMPILE_HEADER  property  on  all  the
       targets. See JOB_POOL_PRECOMPILE_HEADER for additional information.

   CMAKE_JOB_POOLS
       New in version 3.11.

       If  the  JOB_POOLS  global  property is not set, the value of this variable is used in its
       place.  See JOB_POOLS for additional information.

   CMAKE_<LANG>_COMPILER_AR
       New in version 3.9.

       A wrapper around ar adding the appropriate --plugin option for the compiler.

       See also CMAKE_AR.

   CMAKE_<LANG>_COMPILER_FRONTEND_VARIANT
       New in version 3.14.

       Identification string of the compiler frontend variant.

       Some compilers have multiple, different frontends  for  accepting  command  line  options.
       (For  example  Clang  originally  only had a frontend compatible with the GNU compiler but
       since its port to Windows (Clang-Cl) it now  also  supports  a  frontend  compatible  with
       MSVC.)   When  CMake detects such a compiler it sets this variable to what would have been
       the CMAKE_<LANG>_COMPILER_ID for the compiler whose frontend it resembles.

       NOTE:
          In other words,  this  variable  describes  what  command  line  options  and  language
          extensions the compiler frontend expects.

       Changed in version 3.26: This variable is set for GNU, MSVC, and AppleClang compilers that
       have only one frontend variant.

   CMAKE_<LANG>_COMPILER_RANLIB
       New in version 3.9.

       A wrapper around ranlib adding the appropriate --plugin option for the compiler.

       See also CMAKE_RANLIB.

   CMAKE_<LANG>_LINK_LIBRARY_SUFFIX
       New in version 3.16.

       Language-specific suffix for libraries that you link to.

       The suffix to use for the end of a library filename, .lib on Windows.

   CMAKE_LINK_LIBRARY_SUFFIX
       The suffix for libraries that you link to.

       The suffix to use for the end of a library filename, .lib on Windows.

   CMAKE_LINK_SEARCH_END_STATIC
       New in version 3.4.

       End a link line such that static system libraries are used.

       Some linkers support switches such as -Bstatic and -Bdynamic to determine whether  to  use
       static  or  shared  libraries for -lXXX options.  CMake uses these options to set the link
       type for libraries whose full paths are not known or (in some cases) are in implicit  link
       directories  for  the platform.  By default CMake adds an option at the end of the library
       list (if necessary) to set the linker  search  type  back  to  its  starting  type.   This
       property switches the final linker search type to -Bstatic regardless of how it started.

       This  variable  is  used  to initialize the target property LINK_SEARCH_END_STATIC for all
       targets. If set, its value is also used by the try_compile() command.

       See also CMAKE_LINK_SEARCH_START_STATIC.

   CMAKE_LINK_SEARCH_START_STATIC
       New in version 3.4.

       Assume the linker looks for static libraries by default.

       Some linkers support switches such as -Bstatic and -Bdynamic to determine whether  to  use
       static  or  shared  libraries for -lXXX options.  CMake uses these options to set the link
       type for libraries whose full paths are not known or (in some cases) are in implicit  link
       directories  for  the  platform.   By  default  the  linker  search  type is assumed to be
       -Bdynamic at the beginning of the library list.  This property switches the assumption  to
       -Bstatic.   It  is  intended for use when linking an executable statically (e.g.  with the
       GNU -static option).

       This variable is used to initialize the target property LINK_SEARCH_START_STATIC  for  all
       targets.  If set, its value is also used by the try_compile() command.

       See also CMAKE_LINK_SEARCH_END_STATIC.

   CMAKE_MAJOR_VERSION
       First version number component of the CMAKE_VERSION variable.

   CMAKE_MAKE_PROGRAM
       Tool  that  can  launch  the  native  build  system.  The value may be the full path to an
       executable or just the tool name if it is expected to be in the PATH.

       The tool selected depends on the CMAKE_GENERATOR used to configure the project:

       • The Makefile Generators set this to make, gmake,  or  a  generator-specific  tool  (e.g.
         nmake for NMake Makefiles).

         These generators store CMAKE_MAKE_PROGRAM in the CMake cache so that it may be edited by
         the user.

       • The Ninja generator sets this to ninja.

         This generator stores CMAKE_MAKE_PROGRAM in the CMake cache so that it may be edited  by
         the user.

       • The Xcode generator sets this to xcodebuild.

         This  generator  prefers  to  lookup  the  build tool at build time rather than to store
         CMAKE_MAKE_PROGRAM in the CMake cache ahead of time.  This is because xcodebuild is easy
         to find.

         For  compatibility  with versions of CMake prior to 3.2, if a user or project explicitly
         adds CMAKE_MAKE_PROGRAM to the CMake cache then CMake will use the specified value.

       • The Visual Studio Generators set this to the  full  path  to  MSBuild.exe  (VS  >=  10),
         devenv.com  (VS  7,8,9),  or  VCExpress.exe  (VS  Express  8,9).   (See  also  variables
         CMAKE_VS_MSBUILD_COMMAND and CMAKE_VS_DEVENV_COMMAND.

         These generators prefer to lookup the build tool at build  time  rather  than  to  store
         CMAKE_MAKE_PROGRAM  in  the  CMake  cache  ahead of time.  This is because the tools are
         version-specific and can be located using the Windows Registry.  It  is  also  necessary
         because  the proper build tool may depend on the project content (e.g. the Intel Fortran
         plugin to VS 10 and 11 requires devenv.com to  build  its  .vfproj  project  files  even
         though MSBuild.exe is normally preferred to support the CMAKE_GENERATOR_TOOLSET).

         For  compatibility  with versions of CMake prior to 3.0, if a user or project explicitly
         adds CMAKE_MAKE_PROGRAM to the CMake cache then CMake will use the  specified  value  if
         possible.

       • The  Green  Hills  MULTI  generator sets this to the full path to gbuild.exe(Windows) or
         gbuild(Linux) based upon the toolset being used.

         Once the generator has initialized a particular value for this  variable,  changing  the
         value has undefined behavior.

       The CMAKE_MAKE_PROGRAM variable is set for use by project code.  The value is also used by
       the cmake --build and ctest --build-and-test tools to launch the native build process.

   CMAKE_MATCH_COUNT
       New in version 3.2.

       The number of matches with the last regular expression.

       When a regular expression match is used, CMake fills in CMAKE_MATCH_<n> variables with the
       match contents.  The CMAKE_MATCH_COUNT variable holds the number of match expressions when
       these are filled.

   CMAKE_MATCH_<n>
       New in version 3.9.

       Capture group <n> matched by the last regular expression, for groups 0 through 9.  Group 0
       is the entire match.  Groups 1 through 9 are the subexpressions captured by () syntax.

       When a regular expression match is used, CMake fills in CMAKE_MATCH_<n> variables with the
       match contents.  The CMAKE_MATCH_COUNT variable holds the number of match expressions when
       these are filled.

   CMAKE_MINIMUM_REQUIRED_VERSION
       The    <min>    version    of   CMake   given   to   the   most   recent   call   to   the
       cmake_minimum_required(VERSION) command in  the  current  variable  scope  or  any  parent
       variable scope.

   CMAKE_MINOR_VERSION
       Second version number component of the CMAKE_VERSION variable.

   CMAKE_NETRC
       New in version 3.11.

       This  variable  is  used  to  initialize  the  NETRC  option  for  the  file(DOWNLOAD) and
       file(UPLOAD) commands.  See those commands for additional information.

       This variable is also used by the ExternalProject and FetchContent  modules  for  internal
       calls to file(DOWNLOAD).

       The local option takes precedence over this variable.

   CMAKE_NETRC_FILE
       New in version 3.11.

       This  variable  is  used  to  initialize  the NETRC_FILE option for the file(DOWNLOAD) and
       file(UPLOAD) commands.  See those commands for additional information.

       This variable is also used by the ExternalProject and FetchContent  modules  for  internal
       calls to file(DOWNLOAD).

       The local option takes precedence over this variable.

   CMAKE_PARENT_LIST_FILE
       Full path to the CMake file that included the current one.

       While processing a CMake file loaded by include() or find_package() this variable contains
       the full path to the file including it.  The top  of  the  include  stack  is  always  the
       CMakeLists.txt for the current directory.  See also CMAKE_CURRENT_LIST_FILE.

   CMAKE_PATCH_VERSION
       Third version number component of the CMAKE_VERSION variable.

   CMAKE_PROJECT_DESCRIPTION
       New in version 3.9.

       The description of the top level project.

       This  variable  holds  the  description  of  the  project  as  specified  in the top level
       CMakeLists.txt  file  by  a  project()  command.   In  the  event  that  the   top   level
       CMakeLists.txt  contains  multiple project() calls, the most recently called one from that
       top level CMakeLists.txt will determine the value that CMAKE_PROJECT_DESCRIPTION contains.
       For example, consider the following top level CMakeLists.txt:

          cmake_minimum_required(VERSION 3.0)
          project(First DESCRIPTION "I am First")
          project(Second DESCRIPTION "I am Second")
          add_subdirectory(sub)
          project(Third DESCRIPTION "I am Third")

       And sub/CMakeLists.txt with the following contents:

          project(SubProj DESCRIPTION "I am SubProj")
          message("CMAKE_PROJECT_DESCRIPTION = ${CMAKE_PROJECT_DESCRIPTION}")

       The  most  recently  seen  project()  command  from  the top level CMakeLists.txt would be
       project(Second ...), so this will print:

          CMAKE_PROJECT_DESCRIPTION = I am Second

       To obtain the description from the most recent call to project() in the current  directory
       scope or above, see the PROJECT_DESCRIPTION variable.

   CMAKE_PROJECT_HOMEPAGE_URL
       New in version 3.12.

       The homepage URL of the top level project.

       This  variable  holds  the  homepage  URL  of  the  project  as specified in the top level
       CMakeLists.txt  file  by  a  project()  command.   In  the  event  that  the   top   level
       CMakeLists.txt  contains  multiple project() calls, the most recently called one from that
       top  level  CMakeLists.txt  will  determine  the  value  that   CMAKE_PROJECT_HOMEPAGE_URL
       contains.  For example, consider the following top level CMakeLists.txt:

          cmake_minimum_required(VERSION 3.0)
          project(First HOMEPAGE_URL "http://first.example.com")
          project(Second HOMEPAGE_URL "http://second.example.com")
          add_subdirectory(sub)
          project(Third HOMEPAGE_URL "http://third.example.com")

       And sub/CMakeLists.txt with the following contents:

          project(SubProj HOMEPAGE_URL "http://subproj.example.com")
          message("CMAKE_PROJECT_HOMEPAGE_URL = ${CMAKE_PROJECT_HOMEPAGE_URL}")

       The  most  recently  seen  project()  command  from  the top level CMakeLists.txt would be
       project(Second ...), so this will print:

          CMAKE_PROJECT_HOMEPAGE_URL = http://second.example.com

       To obtain the homepage URL from the most recent call to project() in the current directory
       scope or above, see the PROJECT_HOMEPAGE_URL variable.

   CMAKE_PROJECT_NAME
       The name of the top level project.

       This  variable  holds the name of the project as specified in the top level CMakeLists.txt
       file by a project() command.  In the event that  the  top  level  CMakeLists.txt  contains
       multiple  project() calls, the most recently called one from that top level CMakeLists.txt
       will determine the name that  CMAKE_PROJECT_NAME  contains.   For  example,  consider  the
       following top level CMakeLists.txt:

          cmake_minimum_required(VERSION 3.0)
          project(First)
          project(Second)
          add_subdirectory(sub)
          project(Third)

       And sub/CMakeLists.txt with the following contents:

          project(SubProj)
          message("CMAKE_PROJECT_NAME = ${CMAKE_PROJECT_NAME}")

       The  most  recently  seen  project()  command  from  the top level CMakeLists.txt would be
       project(Second), so this will print:

          CMAKE_PROJECT_NAME = Second

       To obtain the name from the most recent call to project() in the current  directory  scope
       or above, see the PROJECT_NAME variable.

   CMAKE_PROJECT_VERSION
       New in version 3.12.

       The version of the top level project.

       This   variable  holds  the  version  of  the  project  as  specified  in  the  top  level
       CMakeLists.txt  file  by  a  project()  command.   In  the  event  that  the   top   level
       CMakeLists.txt  contains  multiple project() calls, the most recently called one from that
       top level CMakeLists.txt will determine the  value  that  CMAKE_PROJECT_VERSION  contains.
       For example, consider the following top level CMakeLists.txt:

          cmake_minimum_required(VERSION 3.0)
          project(First VERSION 1.2.3)
          project(Second VERSION 3.4.5)
          add_subdirectory(sub)
          project(Third VERSION 6.7.8)

       And sub/CMakeLists.txt with the following contents:

          project(SubProj VERSION 1)
          message("CMAKE_PROJECT_VERSION = ${CMAKE_PROJECT_VERSION}")

       The  most  recently  seen  project()  command  from  the top level CMakeLists.txt would be
       project(Second ...), so this will print:

          CMAKE_PROJECT_VERSION = 3.4.5

       To obtain the version from the most recent call to  project()  in  the  current  directory
       scope or above, see the PROJECT_VERSION variable.

   CMAKE_PROJECT_VERSION_MAJOR
       New in version 3.12.

       The major version of the top level project.

       This  variable  holds  the  major  version  of  the  project as specified in the top level
       CMakeLists.txt file by a project() command. Please see CMAKE_PROJECT_VERSION documentation
       for the behavior when multiple project() commands are used in the sources.

   CMAKE_PROJECT_VERSION_MINOR
       New in version 3.12.

       The minor version of the top level project.

       This  variable  holds  the  minor  version  of  the  project as specified in the top level
       CMakeLists.txt file by a project() command. Please see CMAKE_PROJECT_VERSION documentation
       for the behavior when multiple project() commands are used in the sources.

   CMAKE_PROJECT_VERSION_PATCH
       New in version 3.12.

       The patch version of the top level project.

       This  variable  holds  the  patch  version  of  the  project as specified in the top level
       CMakeLists.txt file by a project() command. Please see CMAKE_PROJECT_VERSION documentation
       for the behavior when multiple project() commands are used in the sources.

   CMAKE_PROJECT_VERSION_TWEAK
       New in version 3.12.

       The tweak version of the top level project.

       This  variable  holds  the  tweak  version  of  the  project as specified in the top level
       CMakeLists.txt file by a project() command. Please see CMAKE_PROJECT_VERSION documentation
       for the behavior when multiple project() commands are used in the sources.

   CMAKE_RANLIB
       Name of randomizing tool for static libraries.

       This specifies name of the program that randomizes libraries on UNIX, not used on Windows,
       but may be present.

   CMAKE_ROOT
       Install directory for running cmake.

       This is the install root for the running CMake and the  Modules  directory  can  be  found
       here.  This is commonly used in this format: ${CMAKE_ROOT}/Modules

   CMAKE_RULE_MESSAGES
       New in version 3.13.

       Specify whether to report a message for each make rule.

       If  set  in  the  cache  it is used to initialize the value of the RULE_MESSAGES property.
       Users may disable the option in their local build tree to disable  granular  messages  and
       report only as each target completes in Makefile builds.

   CMAKE_SCRIPT_MODE_FILE
       Full path to the cmake -P script file currently being processed.

       When  run in cmake -P script mode, CMake sets this variable to the full path of the script
       file.  When run to configure a CMakeLists.txt file, this variable is not set.

   CMAKE_SHARED_LIBRARY_PREFIX
       The prefix for shared libraries that you link to.

       The prefix to use for the name of a shared library, lib on UNIX.

       CMAKE_SHARED_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.

   CMAKE_SHARED_LIBRARY_SUFFIX
       The suffix for shared libraries that you link to.

       The suffix to use for the end of a shared library filename, .dll on Windows.

       CMAKE_SHARED_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.

   CMAKE_SHARED_MODULE_PREFIX
       The prefix for loadable modules that you link to.

       The prefix to use for the name of a loadable module on this platform.

       CMAKE_SHARED_MODULE_PREFIX_<LANG> overrides this for language <LANG>.

   CMAKE_SHARED_MODULE_SUFFIX
       The suffix for shared libraries that you link to.

       The suffix to use for the end of a loadable module filename on this platform

       CMAKE_SHARED_MODULE_SUFFIX_<LANG> overrides this for language <LANG>.

   CMAKE_SIZEOF_VOID_P
       Size of a void pointer.

       This is set to the size of a pointer on the target machine, and is  determined  by  a  try
       compile.   If a 64-bit size is found, then the library search path is modified to look for
       64-bit libraries first.

   CMAKE_SKIP_INSTALL_RULES
       Whether to disable generation of installation rules.

       If  TRUE,  CMake  will  neither  generate  installation  rules  nor   will   it   generate
       cmake_install.cmake files. This variable is FALSE by default.

   CMAKE_SKIP_RPATH
       If true, do not add run time path information.

       If  this  is set to TRUE, then the rpath information is not added to compiled executables.
       The default is to add rpath information if the platform supports it.  This allows for easy
       running  from  the build tree.  To omit RPATH in the install step, but not the build step,
       use  CMAKE_SKIP_INSTALL_RPATH  instead.  To  omit   RPATH   in   the   build   step,   use
       CMAKE_SKIP_BUILD_RPATH.

       For  more  information  on  RPATH  handling  see  the INSTALL_RPATH and BUILD_RPATH target
       properties.

   CMAKE_SOURCE_DIR
       The path to the top level of the source tree.

       This is the full path to the top level of the current CMake source tree.  For an in-source
       build, this would be the same as CMAKE_BINARY_DIR.

       When   run   in   cmake  -P  script  mode,  CMake  sets  the  variables  CMAKE_BINARY_DIR,
       CMAKE_SOURCE_DIR, CMAKE_CURRENT_BINARY_DIR and  CMAKE_CURRENT_SOURCE_DIR  to  the  current
       working directory.

   CMAKE_STATIC_LIBRARY_PREFIX
       The prefix for static libraries that you link to.

       The prefix to use for the name of a static library, lib on UNIX.

       CMAKE_STATIC_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.

   CMAKE_STATIC_LIBRARY_SUFFIX
       The suffix for static libraries that you link to.

       The suffix to use for the end of a static library filename, .lib on Windows.

       CMAKE_STATIC_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.

   CMAKE_Swift_MODULE_DIRECTORY
       New in version 3.15.

       Swift module output directory.

       This  variable  is  used  to  initialize  the  Swift_MODULE_DIRECTORY  property on all the
       targets.  See the target property for additional information.

   CMAKE_Swift_NUM_THREADS
       New in version 3.15.1.

       Number of threads for parallel compilation for Swift targets.

       This variable controls the number of parallel jobs  that  the  swift  driver  creates  for
       building  targets.  If not specified, it will default to the number of logical CPUs on the
       host.

   CMAKE_TOOLCHAIN_FILE
       Path to toolchain file supplied to cmake(1).

       This variable is specified on the command line when cross-compiling with CMake.  It is the
       path  to  a  file  which  is read early in the CMake run and which specifies locations for
       compilers and  toolchain  utilities,  and  other  target  platform  and  compiler  related
       information.

       Relative  paths  are allowed and are interpreted first as relative to the build directory,
       and if not found, relative to the source directory.

       This is initialized by the CMAKE_TOOLCHAIN_FILE environment variable if it is set  when  a
       new build tree is first created.

       See  the  CMAKE_PROJECT_TOP_LEVEL_INCLUDES  variable for setting other things not directly
       related to the toolchain.

   CMAKE_TWEAK_VERSION
       Defined to 0 for compatibility with code written for older CMake versions  that  may  have
       defined higher values.

       NOTE:
          In  CMake  versions 2.8.2 through 2.8.12, this variable holds the fourth version number
          component of the CMAKE_VERSION variable.

   CMAKE_VERBOSE_MAKEFILE
       Enable verbose output from Makefile builds.

       This variable is a cache entry initialized (to FALSE) by the project() command.  Users may
       enable  the  option  in  their  local  build tree to get more verbose output from Makefile
       builds and show each command line as it is launched.

   CMAKE_VERSION
       The CMake version string as three non-negative  integer  components  separated  by  .  and
       possibly  followed  by  -  and  other information.  The first two components represent the
       feature level and the third component represents either a  bug-fix  level  or  development
       date.

       Release versions and release candidate versions of CMake use the format:

          <major>.<minor>.<patch>[-rc<n>]

       where  the <patch> component is less than 20000000.  Development versions of CMake use the
       format:

          <major>.<minor>.<date>[-<id>]

       where the <date> component is of format CCYYMMDD and  <id>  may  contain  arbitrary  text.
       This  represents development as of a particular date following the <major>.<minor> feature
       release.

       Individual component values are also available in variables:

       • CMAKE_MAJOR_VERSIONCMAKE_MINOR_VERSIONCMAKE_PATCH_VERSIONCMAKE_TWEAK_VERSION

       Use the if() command VERSION_LESS, VERSION_GREATER, VERSION_EQUAL, VERSION_LESS_EQUAL,  or
       VERSION_GREATER_EQUAL  operators  to  compare  version string values against CMAKE_VERSION
       using a component-wise test.  Version component values may be  10  or  larger  so  do  not
       attempt to compare version strings as floating-point numbers.

       NOTE:
          CMake  versions  2.8.2  through  2.8.12  used  three  components for the feature level.
          Release  versions  represented  the  bug-fix  level  in  a   fourth   component,   i.e.
          <major>.<minor>.<patch>[.<tweak>][-rc<n>].    Development   versions   represented  the
          development date in the fourth component, i.e. <major>.<minor>.<patch>.<date>[-<id>].

          CMake versions prior to 2.8.2 used three components for the feature level  and  had  no
          bug-fix  component.   Release  versions  used  an  even-valued  second  component, i.e.
          <major>.<even-minor>.<patch>[-rc<n>].  Development versions used an  odd-valued  second
          component    with    the    development    date    as   the   third   component,   i.e.
          <major>.<odd-minor>.<date>.

          The CMAKE_VERSION variable is defined by CMake  2.6.3  and  higher.   Earlier  versions
          defined only the individual component variables.

   CMAKE_VS_DEVENV_COMMAND
       The  generators  for  Visual  Studio  9 2008 and above set this variable to the devenv.com
       command installed with the corresponding Visual Studio version.  Note that  this  variable
       may be empty on Visual Studio Express editions because they do not provide this tool.

       This  variable  is  not defined by other generators even if devenv.com is installed on the
       computer.

       The CMAKE_VS_MSBUILD_COMMAND is also provided for Visual Studio 11 2012  and  above.   See
       also the CMAKE_MAKE_PROGRAM variable.

   CMAKE_VS_MSBUILD_COMMAND
       The  generators  for  Visual Studio 11 2012 and above set this variable to the MSBuild.exe
       command installed with the corresponding Visual Studio version.

       This variable is not defined by other generators even if MSBuild.exe is installed  on  the
       computer.

       The  CMAKE_VS_DEVENV_COMMAND  is  also  provided  for  the  non-Express editions of Visual
       Studio.  See also the CMAKE_MAKE_PROGRAM variable.

   CMAKE_VS_NsightTegra_VERSION
       New in version 3.1.

       When using a Visual Studio generator with the CMAKE_SYSTEM_NAME variable set  to  Android,
       this  variable  contains  the  version  number of the installed NVIDIA Nsight Tegra Visual
       Studio Edition.

   CMAKE_VS_NUGET_PACKAGE_RESTORE
       New in version 3.23.

       When using a Visual Studio generator, this  cache  variable  controls  if  msbuild  should
       automatically  attempt  to  restore NuGet packages prior to a build. NuGet packages can be
       defined using the VS_PACKAGE_REFERENCES property on a target. If no package references are
       defined, this setting will do nothing.

       The  command line option --resolve-package-references can be used alternatively to control
       the resolve behavior globally. This option will take precedence over the cache variable.

       Targets that use the DOTNET_SDK are required to run a restore before  building.  Disabling
       this option may cause the build to fail in such projects.

       This setting is stored as a cache entry. Default value is ON.

       See also the VS_PACKAGE_REFERENCES property.

   CMAKE_VS_PLATFORM_NAME
       New in version 3.1.

       Visual Studio target platform name used by the current generator.

       VS  8 and above allow project files to specify a target platform.  CMake provides the name
       of the chosen platform in this variable.  See the  CMAKE_GENERATOR_PLATFORM  variable  for
       details.

       See also the CMAKE_VS_PLATFORM_NAME_DEFAULT variable.

   CMAKE_VS_PLATFORM_NAME_DEFAULT
       New in version 3.14.3.

       Default  for  the  Visual  Studio  target  platform name for the current generator without
       considering the  value  of  the  CMAKE_GENERATOR_PLATFORM  variable.   For  Visual  Studio
       Generators  for  VS  2017  and  below this is always Win32.  For VS 2019 and above this is
       based on the host platform.

       See also the CMAKE_VS_PLATFORM_NAME variable.

   CMAKE_VS_PLATFORM_TOOLSET
       Visual Studio Platform Toolset name.

       VS 10 and above use MSBuild under the  hood  and  support  multiple  compiler  toolchains.
       CMake may specify a toolset explicitly, such as v110 for VS 11 or Windows7.1SDK for 64-bit
       support in VS 10 Express.  CMake provides the name of the chosen toolset in this variable.

       See the CMAKE_GENERATOR_TOOLSET variable for details.

   CMAKE_VS_PLATFORM_TOOLSET_CUDA
       New in version 3.9.

       NVIDIA CUDA Toolkit version whose Visual Studio toolset to use.

       The Visual Studio Generators for VS 2010 and above support using a CUDA  toolset  provided
       by  a  CUDA  Toolkit.   The  toolset  version  number  may  be  specified  by  a  field in
       CMAKE_GENERATOR_TOOLSET of the form cuda=8.0. Or it is automatically detected if a path to
       a  standalone  CUDA  directory  is specified in the form cuda=C:\path\to\cuda.  If none is
       specified CMake will choose a default version.  CMake provides the selected  CUDA  toolset
       version  in  this  variable.  The value may be empty if no CUDA Toolkit with Visual Studio
       integration is installed.

   CMAKE_VS_PLATFORM_TOOLSET_CUDA_CUSTOM_DIR
       New in version 3.16.

       Path to standalone NVIDIA CUDA Toolkit (eg. extracted from installer).

       The  Visual  Studio  Generators  for  VS  2010  and  above  support  using  a   standalone
       (non-installed)   NVIDIA  CUDA  toolkit.   The  path  may  be  specified  by  a  field  in
       CMAKE_GENERATOR_TOOLSET of the form cuda=C:\path\to\cuda.  The  given  directory  must  at
       least  contain  the nvcc compiler in path .\bin and must provide Visual Studio integration
       files in path .\extras\visual_studio_integration\ MSBuildExtensions\.  One  can  create  a
       standalone  CUDA  toolkit directory by either opening a installer with 7zip or copying the
       files that are extracted by the running installer. The value may be empty if no path to  a
       standalone CUDA Toolkit was specified.

   CMAKE_VS_PLATFORM_TOOLSET_HOST_ARCHITECTURE
       New in version 3.8.

       Visual Studio preferred tool architecture.

       The  Visual  Studio  Generators  for  VS 2013 and above support using either the 32-bit or
       64-bit  host  toolchains  by  specifying   a   host=x86   or   host=x64   value   in   the
       CMAKE_GENERATOR_TOOLSET  option.   CMake  provides  the  selected  toolchain  architecture
       preference in this variable (x86, x64, ARM64 or empty).

   CMAKE_VS_PLATFORM_TOOLSET_VERSION
       New in version 3.12.

       Visual Studio Platform Toolset version.

       The Visual Studio Generators for VS 2017 and above allow to select minor versions  of  the
       same   toolset.   The   toolset   version   number   may   be  specified  by  a  field  in
       CMAKE_GENERATOR_TOOLSET of the form version=14.11. If none is specified CMake will  choose
       a default toolset. The value may be empty if no minor version was selected and the default
       is used.

       If the  value  is  not  empty,  it  is  the  version  number  that  MSBuild  uses  in  its
       Microsoft.VCToolsVersion.*.props file names.

       New  in  version  3.19.7: VS 16.9's toolset may also be specified as 14.28.16.9 because VS
       16.10 uses the file name Microsoft.VCToolsVersion.14.28.16.9.props.

   Three-Component MSVC Toolset Versions
       New in version 3.19.7.

       The version= field may be given a three-component toolset version such as 14.28.29910, and
       CMake  will convert it to the name used by MSBuild Microsoft.VCToolsVersion.*.props files.
       This is useful to  distinguish  between  VS  16.8's  14.28.29333  toolset  and  VS  16.9's
       14.28.29910 toolset.  It also matches vcvarsall's -vcvars_ver= behavior.

   CMAKE_VS_TARGET_FRAMEWORK_IDENTIFIER
       New in version 3.22.

       Visual Studio target framework identifier.

       In  some  cases,  the  Visual  Studio Generators may use an explicit value for the MSBuild
       TargetFrameworkIdentifier setting in .csproj files.  CMake provides the  chosen  value  in
       this variable.

       See also CMAKE_VS_TARGET_FRAMEWORK_VERSION and CMAKE_VS_TARGET_FRAMEWORK_TARGETS_VERSION.

   CMAKE_VS_TARGET_FRAMEWORK_TARGETS_VERSION
       New in version 3.22.

       Visual Studio target framework targets version.

       In  some  cases,  the  Visual  Studio Generators may use an explicit value for the MSBuild
       TargetFrameworkTargetsVersion setting in .csproj files.  CMake provides the  chosen  value
       in this variable.

       See also CMAKE_VS_TARGET_FRAMEWORK_VERSION and CMAKE_VS_TARGET_FRAMEWORK_IDENTIFIER.

   CMAKE_VS_TARGET_FRAMEWORK_VERSION
       New in version 3.22.

       Visual Studio target framework version.

       In  some  cases,  the  Visual  Studio Generators may use an explicit value for the MSBuild
       TargetFrameworkVersion setting in .csproj files.  CMake provides the chosen value in  this
       variable.

       See the CMAKE_DOTNET_TARGET_FRAMEWORK_VERSION variable and DOTNET_TARGET_FRAMEWORK_VERSION
       target property to specify custom TargetFrameworkVersion values for project targets.

       See              also               CMAKE_VS_TARGET_FRAMEWORK_IDENTIFIER               and
       CMAKE_VS_TARGET_FRAMEWORK_TARGETS_VERSION.

   CMAKE_VS_VERSION_BUILD_NUMBER
       New in version 3.26.

       Visual Studio version.

       Visual  Studio  Generators  for  VS  2017 and above set this variable to the Visual Studio
       version build number in the format <major>.<minor>.<date>.<build>.

       The components are:

       <major>.<minor>
          The VS major and minor version numbers.  These are the  same  as  the  release  version
          numbers.

       <date>
          A  build  date  in  the format MMMDD, where MMM is a month index since an epoch used by
          Microsoft, and DD is a day in that month.

       <build>
          A build index on the day represented by <date>.

       The build number is reported by vswhere as installationVersion.  For example, VS  16.11.10
       has build number 16.11.32126.315.

       See also the CMAKE_GENERATOR_INSTANCE variable.

   CMAKE_VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION
       New in version 3.27.

       Tell Visual Studio Generators to use the given Windows Target Platform Minimum Version.

       This variable is used to initialize the VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION property on
       all targets when they are created.  See that target property for additional information.

   CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION
       New in version 3.4.

       Visual Studio Windows Target Platform Version.

       When targeting Windows 10 and above, Visual  Studio  Generators  for  VS  2015  and  above
       support specification of a Windows SDK version:

       • If  CMAKE_GENERATOR_PLATFORM  specifies a version= field, as documented by Visual Studio
         Platform Selection, that SDK version is selected.

       • Otherwise, if the WindowsSDKVersion environment variable is  set  to  an  available  SDK
         version, that version is selected.  This is intended for use in environments established
         by vcvarsall.bat or similar scripts.

         New in version 3.27: This is enabled by policy CMP0149.

       • Otherwise, if CMAKE_SYSTEM_VERSION is set to an available SDK version, that  version  is
         selected.

         Changed in version 3.27: This is disabled by policy CMP0149.

       • Otherwise, CMake uses the latest Windows SDK version available.

       The      chosen      Windows      target     version     number     is     provided     in
       CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION.  If no Windows 10 SDK is  available  this  value
       will be empty.

       One  may  set a CMAKE_WINDOWS_KITS_10_DIR environment variable to an absolute path to tell
       CMake to look for Windows 10 SDKs in  a  custom  location.   The  specified  directory  is
       expected to contain Include/10.0.* directories.

       See also CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION_MAXIMUM.

   CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION_MAXIMUM
       New in version 3.19.

       Override the Windows 10 SDK Maximum Version for VS 2015 and beyond.

       The  CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION_MAXIMUM variable may be set to a false value
       (e.g. OFF, FALSE, or 0) or the SDK version to use as the maximum (e.g. 10.0.14393.0).   If
       unset,  the  default  depends on which version of Visual Studio is targeted by the current
       generator.

       This  can  be  used   to   exclude   Windows   SDK   versions   from   consideration   for
       CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION.

   CMAKE_XCODE_BUILD_SYSTEM
       New in version 3.19.

       Xcode build system selection.

       The  Xcode  generator  defines  this variable to indicate which variant of the Xcode build
       system will be used.  The value is the version of Xcode in which the  corresponding  build
       system first became mature enough for use by CMake.  The possible values are:

       1      The  original  Xcode  build  system.   This is the default when using Xcode 11.x or
              below.

       12     The Xcode "new build system" introduced by Xcode 10.  It became mature  enough  for
              use by CMake in Xcode 12.  This is the default when using Xcode 12.x or above.

       The  CMAKE_XCODE_BUILD_SYSTEM  variable  is  informational  and  should not be modified by
       project code.  See the Toolset and Build System Selection documentation section to  select
       the Xcode build system.

   CMAKE_XCODE_PLATFORM_TOOLSET
       Xcode compiler selection.

       Xcode supports selection of a compiler from one of the installed toolsets.  CMake provides
       the name of the chosen toolset in this variable, if any is explicitly selected (e.g.   via
       the cmake -T option).

   <PROJECT-NAME>_BINARY_DIR
       Top level binary directory for the named project.

       A  variable  is  created  with  the  name used in the project() command, and is the binary
       directory for the project.  This can be useful when add_subdirectory() is used to  connect
       several projects.

   <PROJECT-NAME>_DESCRIPTION
       New in version 3.12.

       Value  given  to  the  DESCRIPTION option of the most recent call to the project() command
       with project name <PROJECT-NAME>, if any.

   <PROJECT-NAME>_HOMEPAGE_URL
       New in version 3.12.

       Value given to the HOMEPAGE_URL option of the most recent call to  the  project()  command
       with project name <PROJECT-NAME>, if any.

   <PROJECT-NAME>_IS_TOP_LEVEL
       New in version 3.21.

       A  boolean  variable  indicating  whether  the  named  project  was  called in a top level
       CMakeLists.txt file.

       To obtain the value from the most recent call to project() in the current directory  scope
       or above, see the PROJECT_IS_TOP_LEVEL variable.

       The variable value will be true in:

       • the top-level directory of the project

       • the top-level directory of an external project added by ExternalProject

       • a directory added by add_subdirectory() that does not also contain a project() call

       • a  directory  added  by  FetchContent_MakeAvailable(),  if  the fetched content does not
         contain a project() call

       The variable value will be false in:

       • a directory added by add_subdirectory() that also contains a project() call

       • a directory added by FetchContent_MakeAvailable(), if the  fetched  content  contains  a
         project() call

   <PROJECT-NAME>_SOURCE_DIR
       Top level source directory for the named project.

       A  variable  is  created  with  the  name used in the project() command, and is the source
       directory for the project.  This can be useful when add_subdirectory() is used to  connect
       several projects.

   <PROJECT-NAME>_VERSION
       Value  given  to  the VERSION option of the most recent call to the project() command with
       project name <PROJECT-NAME>, if any.

       See   also   the   component-wise    version    variables    <PROJECT-NAME>_VERSION_MAJOR,
       <PROJECT-NAME>_VERSION_MINOR,               <PROJECT-NAME>_VERSION_PATCH,              and
       <PROJECT-NAME>_VERSION_TWEAK.

   <PROJECT-NAME>_VERSION_MAJOR
       First version number component of  the  <PROJECT-NAME>_VERSION  variable  as  set  by  the
       project() command.

   <PROJECT-NAME>_VERSION_MINOR
       Second  version  number  component  of  the  <PROJECT-NAME>_VERSION variable as set by the
       project() command.

   <PROJECT-NAME>_VERSION_PATCH
       Third version number component of  the  <PROJECT-NAME>_VERSION  variable  as  set  by  the
       project() command.

   <PROJECT-NAME>_VERSION_TWEAK
       Fourth  version  number  component  of  the  <PROJECT-NAME>_VERSION variable as set by the
       project() command.

   PROJECT_BINARY_DIR
       Full path to build directory for project.

       This is the binary directory of the most recent project() command.

   PROJECT_DESCRIPTION
       New in version 3.9.

       Short project description given to the project command.

       This is the description given to the most recently called project() command in the current
       directory  scope  or  above.   To obtain the description of the top level project, see the
       CMAKE_PROJECT_DESCRIPTION variable.

   PROJECT_HOMEPAGE_URL
       New in version 3.12.

       The homepage URL of the project.

       This is the homepage URL given to the  most  recently  called  project()  command  in  the
       current  directory  scope  or above.  To obtain the homepage URL of the top level project,
       see the CMAKE_PROJECT_HOMEPAGE_URL variable.

   PROJECT_IS_TOP_LEVEL
       New in version 3.21.

       A boolean variable indicating whether the most recently called project()  command  in  the
       current scope or above was in the top level CMakeLists.txt file.

       Some  modules  should only be included as part of the top level CMakeLists.txt file to not
       cause unintended side effects in the  build  tree,  and  this  variable  can  be  used  to
       conditionally  execute  such  code.  For example, consider the CTest module, which creates
       targets and options:

          project(MyProject)
          ...
          if(PROJECT_IS_TOP_LEVEL)
            include(CTest)
          endif()

       The variable value will be true in:

       • the top-level directory of the project

       • the top-level directory of an external project added by ExternalProject

       • a directory added by add_subdirectory() that does not also contain a project() call

       • a directory added by FetchContent_MakeAvailable(),  if  the  fetched  content  does  not
         contain a project() call

       The variable value will be false in:

       • a directory added by add_subdirectory() that also contains a project() call

       • a  directory  added  by  FetchContent_MakeAvailable(), if the fetched content contains a
         project() call

   PROJECT_NAME
       Name of the project given to the project command.

       This is the name given to the most  recently  called  project()  command  in  the  current
       directory  scope  or  above.   To  obtain  the  name  of  the  top  level project, see the
       CMAKE_PROJECT_NAME variable.

   PROJECT_SOURCE_DIR
       This is the source directory of the last call to the project() command made in the current
       directory scope or one of its parents. Note, it is not affected by calls to project() made
       within a child directory scope (i.e. from within a call  to  add_subdirectory()  from  the
       current scope).

   PROJECT_VERSION
       Value  given  to  the  VERSION option of the most recent call to the project() command, if
       any.

       See    also    the     component-wise     version     variables     PROJECT_VERSION_MAJOR,
       PROJECT_VERSION_MINOR, PROJECT_VERSION_PATCH, and PROJECT_VERSION_TWEAK.

   PROJECT_VERSION_MAJOR
       First  version  number  component  of the PROJECT_VERSION variable as set by the project()
       command.

   PROJECT_VERSION_MINOR
       Second version number component of the PROJECT_VERSION variable as set  by  the  project()
       command.

   PROJECT_VERSION_PATCH
       Third  version  number  component  of the PROJECT_VERSION variable as set by the project()
       command.

   PROJECT_VERSION_TWEAK
       Fourth version number component of the PROJECT_VERSION variable as set  by  the  project()
       command.

VARIABLES THAT CHANGE BEHAVIOR

   BUILD_SHARED_LIBS
       Global flag to cause add_library() to create shared libraries if on.

       If  present  and true, this will cause all libraries to be built shared unless the library
       was explicitly added as a static library.  This variable is often added to projects as  an
       option() so that each user of a project can decide if they want to build the project using
       shared or static libraries.

   CMAKE_ABSOLUTE_DESTINATION_FILES
       List of files which have been installed using an ABSOLUTE DESTINATION path.

       This variable is defined by CMake-generated cmake_install.cmake scripts.  It can  be  used
       (read-only)  by  programs  or  scripts that source those install scripts.  This is used by
       some CPack generators (e.g.  RPM).

   CMAKE_ADD_CUSTOM_COMMAND_DEPENDS_EXPLICIT_ONLY
       New in version 3.27.

       Whether to enable the DEPENDS_EXPLICIT_ONLY option by default in add_custom_command().

       This variable affects the default behavior of the add_custom_command()  command.   Setting
       this variable to ON is equivalent to using the DEPENDS_EXPLICIT_ONLY option in all uses of
       that command.

       See also CMAKE_OPTIMIZE_DEPENDENCIES.

   CMAKE_APPBUNDLE_PATH
       Semicolon-separated list of directories specifying a search  path  for  macOS  application
       bundles used by the find_program(), and find_package() commands.

       There is also an environment variable CMAKE_APPBUNDLE_PATH, which is used as an additional
       list of search directories.

   CMAKE_AUTOMOC_RELAXED_MODE
       Deprecated since version 3.15.

       Switch between strict and relaxed automoc mode.

       By default, AUTOMOC behaves exactly as described  in  the  documentation  of  the  AUTOMOC
       target  property.   When  set to TRUE, it accepts more input and tries to find the correct
       input file for moc even if it differs from the documented behavior.  In this mode it  e.g.
       also checks whether a header file is intended to be processed by moc when a "foo.moc" file
       has been included.

       Relaxed mode has to be enabled for KDE4 compatibility.

   CMAKE_BACKWARDS_COMPATIBILITY
       Deprecated.  See CMake Policy CMP0001 documentation.

   CMAKE_BUILD_TYPE
       Specifies the build type on single-configuration generators (e.g.  Makefile Generators  or
       Ninja).   Typical values include Debug, Release, RelWithDebInfo and MinSizeRel, but custom
       build types can also be defined.

       This variable is initialized by the first project() or enable_language() command called in
       a  project  when  a  new build tree is first created.  If the CMAKE_BUILD_TYPE environment
       variable is set, its value is used.  Otherwise, a  toolchain-specific  default  is  chosen
       when  a  language  is  enabled.   The  default value is often an empty string, but this is
       usually not desirable  and  one  of  the  other  standard  build  types  is  usually  more
       appropriate.

       Depending  on the situation, the value of this variable may be treated case-sensitively or
       case-insensitively.  See Build Configurations for discussion of  this  and  other  related
       topics.

       For multi-config generators, see CMAKE_CONFIGURATION_TYPES.

   CMAKE_CLANG_VFS_OVERLAY
       New in version 3.19.

       When  cross  compiling  for  windows  with clang-cl, this variable can be an absolute path
       pointing to a clang virtual file system yaml file, which will enable clang-cl  to  resolve
       windows header names on a case sensitive file system.

   CMAKE_CODEBLOCKS_COMPILER_ID
       New in version 3.11.

       Change the compiler id in the generated CodeBlocks project files.

       CodeBlocks  uses  its  own compiler id string which differs from CMAKE_<LANG>_COMPILER_ID.
       If this variable is left empty, CMake  tries  to  recognize  the  CodeBlocks  compiler  id
       automatically.   Otherwise  the  specified  string is used in the CodeBlocks project file.
       See the CodeBlocks documentation for valid compiler id strings.

       Other IDEs like QtCreator that also use the CodeBlocks generator may ignore this setting.

   CMAKE_CODEBLOCKS_EXCLUDE_EXTERNAL_FILES
       New in version 3.10.

       Change the way the CodeBlocks generator creates project files.

       If this variable evaluates to ON the generator excludes from the project  file  any  files
       that are located outside the project root.

   CMAKE_CODELITE_USE_TARGETS
       New in version 3.7.

       Change the way the CodeLite generator creates projectfiles.

       If  this  variable  evaluates  to  ON at the end of the top-level CMakeLists.txt file, the
       generator creates projectfiles based on targets rather than projects.

   CMAKE_COLOR_DIAGNOSTICS
       New in version 3.24.

       Enable color diagnostics throughout.

       This variable uses three states: ON, OFF and not defined.

       When not defined:

       • Makefile Generators initialize the CMAKE_COLOR_MAKEFILE variable  to  ON.   It  controls
         color buildsystem messages.

       • GNU/Clang compilers are not invoked with any color diagnostics flag.

       When ON:

       • Makefile Generators produce color buildsystem messages by default.  CMAKE_COLOR_MAKEFILE
         is not initialized, but may be explicitly  set  to  OFF  to  disable  color  buildsystem
         messages.

       • GNU/Clang   compilers   are   invoked   with   a   flag   enabling   color   diagnostics
         (-fcolor-diagnostics).

       When OFF:

       • Makefile  Generators  do  not   produce   color   buildsystem   messages   by   default.
         CMAKE_COLOR_MAKEFILE is not initialized, but may be explicitly set to ON to enable color
         buildsystem messages.

       • GNU/Clang  compilers   are   invoked   with   a   flag   disabling   color   diagnostics
         (-fno-color-diagnostics).

       If the CMAKE_COLOR_DIAGNOSTICS environment variable is set, its value is used.  Otherwise,
       CMAKE_COLOR_DIAGNOSTICS is not defined by default.

   CMAKE_COLOR_MAKEFILE
       Enables color output when using the Makefile Generators.

       When enabled, the generated Makefiles will produce colored output.  Default is ON.

   CMAKE_CONFIGURATION_TYPES
       Specifies the available build types  (configurations)  on  multi-config  generators  (e.g.
       Visual  Studio,  Xcode,  or  Ninja  Multi-Config)  as a semicolon-separated list.  Typical
       entries include Debug, Release, RelWithDebInfo and MinSizeRel, but custom build types  can
       also be defined.

       This variable is initialized by the first project() or enable_language() command called in
       a project when a new build  tree  is  first  created.   If  the  CMAKE_CONFIGURATION_TYPES
       environment  variable  is  set,  its  value  is  used.   Otherwise,  the  default value is
       generator-specific.

       Depending on the situation, the values in this variable may be treated case-sensitively or
       case-insensitively.   See  Build  Configurations  for discussion of this and other related
       topics.

       For single-config generators, see CMAKE_BUILD_TYPE.

   CMAKE_DEPENDS_IN_PROJECT_ONLY
       New in version 3.6.

       When set to TRUE in a directory, the build system produced by the Makefile  Generators  is
       set  up  to only consider dependencies on source files that appear either in the source or
       in the binary directories.  Changes to source files outside of these directories will  not
       cause rebuilds.

       This  should  be  used  carefully  in  cases where some source files are picked up through
       external headers during the build.

   CMAKE_DISABLE_FIND_PACKAGE_<PackageName>
       Variable for disabling find_package() calls.

       Every non-REQUIRED find_package() call in  a  project  can  be  disabled  by  setting  the
       variable  CMAKE_DISABLE_FIND_PACKAGE_<PackageName>  to  TRUE.  This can be used to build a
       project without an optional package, although that package is installed.

       This switch should be used during the initial CMake run.  Otherwise  if  the  package  has
       already  been  found  in a previous CMake run, the variables which have been stored in the
       cache will still be there.  In that case it is recommended to remove the  cache  variables
       for this package from the cache using the cache editor or cmake -U.

       See also the CMAKE_REQUIRE_FIND_PACKAGE_<PackageName> variable.

   CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES
       New in version 3.6.

       This cache variable is used by the Eclipse project generator.  See cmake-generators(7).

       The  Eclipse project generator generates so-called linked resources e.g. to the subproject
       root dirs in the source tree or to the source files of targets.  This can be  disabled  by
       setting this variable to FALSE.

   CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
       New in version 3.6.

       This cache variable is used by the Eclipse project generator.  See cmake-generators(7).

       If  this  variable  is set to TRUE, the Eclipse project generator will generate an Eclipse
       project in CMAKE_SOURCE_DIR . This project can then  be  used  in  Eclipse  e.g.  for  the
       version  control  functionality.  CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT defaults to FALSE;
       so nothing is written into the source directory.

   CMAKE_ECLIPSE_MAKE_ARGUMENTS
       New in version 3.6.

       This cache variable is used by the Eclipse project generator.  See cmake-generators(7).

       This variable holds arguments which are used  when  Eclipse  invokes  the  make  tool.  By
       default it is initialized to hold flags to enable parallel builds (using -j typically).

   CMAKE_ECLIPSE_RESOURCE_ENCODING
       New in version 3.16.

       This  cache variable tells the Eclipse CDT4 project generator to set the resource encoding
       to the given value in generated project files.  If no value is given, no encoding will  be
       set.

   CMAKE_ECLIPSE_VERSION
       New in version 3.6.

       This cache variable is used by the Eclipse project generator.  See cmake-generators(7).

       When  using  the Eclipse project generator, CMake tries to find the Eclipse executable and
       detect the version of it. Depending on the version it finds, some features are enabled  or
       disabled.  If CMake doesn't find Eclipse, it assumes the oldest supported version, Eclipse
       Callisto (3.2).

   CMAKE_ERROR_DEPRECATED
       Whether to issue errors for deprecated functionality.

       If TRUE, use of deprecated functionality will issue fatal errors.  If this variable is not
       set, CMake behaves as if it were set to FALSE.

   CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
       Ask  cmake_install.cmake  script  to  error  out  as  soon as a file with absolute INSTALL
       DESTINATION is encountered.

       The fatal error is emitted before the installation of  the  offending  file  takes  place.
       This  variable  is  used by CMake-generated cmake_install.cmake scripts.  If one sets this
       variable to ON while running the script, it may get fatal error messages from the script.

   CMAKE_EXECUTE_PROCESS_COMMAND_ECHO
       New in version 3.15.

       If this variable is set to STDERR, STDOUT or NONE then commands in execute_process() calls
       will be printed to either stderr or stdout or not at all.

   CMAKE_EXPORT_COMPILE_COMMANDS
       New in version 3.5.

       Enable/Disable output of compile commands during generation.

       If enabled, generates a compile_commands.json file containing the exact compiler calls for
       all translation units of the project in machine-readable form.  The  format  of  the  JSON
       file looks like:

          [
            {
              "directory": "/home/user/development/project",
              "command": "/usr/bin/c++ ... -c ../foo/foo.cc",
              "file": "../foo/foo.cc"
            },

            ...

            {
              "directory": "/home/user/development/project",
              "command": "/usr/bin/c++ ... -c ../foo/bar.cc",
              "file": "../foo/bar.cc"
            }
          ]

       This  is  initialized  by  the  CMAKE_EXPORT_COMPILE_COMMANDS  environment  variable,  and
       initializes the EXPORT_COMPILE_COMMANDS target property for all targets.

       NOTE:
          This option is implemented only by Makefile Generators and  Ninja  Generators.   It  is
          ignored on other generators.

          This  option  currently  does  not work well in combination with the UNITY_BUILD target
          property or the CMAKE_UNITY_BUILD variable.

   CMAKE_EXPORT_PACKAGE_REGISTRY
       New in version 3.15.

       Enables the export(PACKAGE) command when CMP0090 is set to NEW.

       The export(PACKAGE) command does nothing by default.  In some cases  it  is  desirable  to
       write  to  the user package registry, so the CMAKE_EXPORT_PACKAGE_REGISTRY variable may be
       set to enable it.

       If   CMP0090   is   not   set   to   NEW   this   variable   does   nothing,    and    the
       CMAKE_EXPORT_NO_PACKAGE_REGISTRY variable controls the behavior instead.

       See also Disabling the Package Registry.

   CMAKE_EXPORT_NO_PACKAGE_REGISTRY
       New in version 3.1.

       Disable the export(PACKAGE) command when CMP0090 is not set to NEW.

       In  some  cases,  for  example  for packaging and for system wide installations, it is not
       desirable to write the user package  registry.   If  the  CMAKE_EXPORT_NO_PACKAGE_REGISTRY
       variable is enabled, the export(PACKAGE) command will do nothing.

       If CMP0090 is set to NEW this variable does nothing, and the CMAKE_EXPORT_PACKAGE_REGISTRY
       variable controls the behavior instead.

       See also Disabling the Package Registry.

   CMAKE_FIND_APPBUNDLE
       New in version 3.4.

       This variable affects how find_* commands choose between  macOS  Application  Bundles  and
       unix-style package components.

       On  Darwin  or  systems  supporting  macOS  Application  Bundles, the CMAKE_FIND_APPBUNDLE
       variable can be set to empty or one of the following:

       FIRST  Try to find application bundles before standard programs.  This is the  default  on
              Darwin.

       LAST   Try to find application bundles after standard programs.

       ONLY   Only try to find application bundles.

       NEVER  Never try to find application bundles.

   CMAKE_FIND_FRAMEWORK
       New in version 3.4.

       This  variable  affects how find_* commands choose between macOS Frameworks and unix-style
       package components.

       On Darwin or systems supporting macOS Frameworks, the CMAKE_FIND_FRAMEWORK variable can be
       set to empty or one of the following:

       FIRST  Try  to  find frameworks before standard libraries or headers.  This is the default
              on Darwin.

       LAST   Try to find frameworks after standard libraries or headers.

       ONLY   Only try to find frameworks.

       NEVER  Never try to find frameworks.

   CMAKE_FIND_LIBRARY_CUSTOM_LIB_SUFFIX
       New in version 3.9.

       Specify a <suffix> to tell the find_library() command to search in a lib<suffix> directory
       before each lib directory that would normally be searched.

       This overrides the behavior of related global properties:

       • FIND_LIBRARY_USE_LIB32_PATHSFIND_LIBRARY_USE_LIB64_PATHSFIND_LIBRARY_USE_LIBX32_PATHS

   CMAKE_FIND_LIBRARY_PREFIXES
       Prefixes to prepend when looking for libraries.

       This specifies what prefixes to add to library names when the find_library() command looks
       for libraries.  On UNIX systems this is typically lib, meaning that when  trying  to  find
       the foo library it will look for libfoo.

   CMAKE_FIND_LIBRARY_SUFFIXES
       Suffixes to append when looking for libraries.

       This specifies what suffixes to add to library names when the find_library() command looks
       for libraries.  On Windows systems this is typically .lib and, depending on the  compiler,
       .dll.a,  .a  (e.g.  GCC and Clang), so when it tries to find the foo library, it will look
       for [<prefix>]foo.lib and/or [<prefix>]foo[.dll].a, depending on the compiler used and the
       <prefix> specified in the CMAKE_FIND_LIBRARY_PREFIXES.

   CMAKE_FIND_NO_INSTALL_PREFIX
       Exclude  the  values  of  the CMAKE_INSTALL_PREFIX and CMAKE_STAGING_PREFIX variables from
       CMAKE_SYSTEM_PREFIX_PATH.    CMake   adds   these    project-destination    prefixes    to
       CMAKE_SYSTEM_PREFIX_PATH  by  default  in  order to support building a series of dependent
       packages and installing them into a common prefix.   Set  CMAKE_FIND_NO_INSTALL_PREFIX  to
       TRUE to suppress this behavior.

       The  CMAKE_SYSTEM_PREFIX_PATH  is  initialized  on  the  first  call  to  a  project()  or
       enable_language() command.  Therefore one  must  set  CMAKE_FIND_NO_INSTALL_PREFIX  before
       this in order to take effect.  A user may set the variable as a cache entry on the command
       line to achieve this.

       Note that the prefix(es) may still be searched for other reasons, such as being  the  same
       prefix as the CMake installation, or for being a built-in system prefix.

   CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY
       New in version 3.1.

       Deprecated since version 3.16: Use the CMAKE_FIND_USE_PACKAGE_REGISTRY variable instead.

       By  default  this  variable  is  not  set.  If neither CMAKE_FIND_USE_PACKAGE_REGISTRY nor
       CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY is set,  then  find_package()  will  use  the  User
       Package Registry unless the NO_CMAKE_PACKAGE_REGISTRY option is provided.

       CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY  is  ignored  if CMAKE_FIND_USE_PACKAGE_REGISTRY is
       set.

       In some cases, for example to locate only system wide installations, it is  not  desirable
       to   use   the   User   Package   Registry   when   searching   for   packages.   If   the
       CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY variable is TRUE, all the  find_package()  commands
       will   skip   the   User   Package   Registry   as   if   they   were   called   with  the
       NO_CMAKE_PACKAGE_REGISTRY argument.

       See also Disabling the Package Registry.

   CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY
       New in version 3.1.

       Deprecated since version 3.16:  Use  the  CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY  variable
       instead.

       By default this variable is not set. If neither CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY nor
       CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY is set, then  find_package()  will  use  the
       System Package Registry unless the NO_CMAKE_SYSTEM_PACKAGE_REGISTRY option is provided.

       CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY            is           ignored           if
       CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY is set.

       In some cases, it is not desirable to use the System Package Registry when  searching  for
       packages.  If  the CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY variable is TRUE, all the
       find_package() commands will skip the System Package Registry as if they were called  with
       the NO_CMAKE_SYSTEM_PACKAGE_REGISTRY argument.

       See also Disabling the Package Registry.

   CMAKE_FIND_PACKAGE_PREFER_CONFIG
       New in version 3.15.

       Tell find_package() to try "Config" mode before "Module" mode if no mode was specified.

       The command find_package() operates without an explicit mode when the reduced signature is
       used without the MODULE option. In this case, by default, CMake first tries Module mode by
       searching  for a Find<pkg>.cmake module.  If it fails, CMake then searches for the package
       using Config mode.

       Set CMAKE_FIND_PACKAGE_PREFER_CONFIG to TRUE to tell find_package() to first search  using
       Config mode before falling back to Module mode.

       This  variable  may  be  useful when a developer has compiled a custom version of a common
       library and wishes to link it to a dependent project.  If this variable is set to TRUE, it
       would  prevent  a  dependent  project's  call to find_package() from selecting the default
       library located by the system's Find<pkg>.cmake  module  before  finding  the  developer's
       custom built library.

       Once  this  variable  is  set,  it is the responsibility of the exported <pkg>Config.cmake
       files to provide the  same  result  variables  as  the  Find<pkg>.cmake  modules  so  that
       dependent projects can use them interchangeably.

   CMAKE_FIND_PACKAGE_RESOLVE_SYMLINKS
       New in version 3.14.

       Set  to  TRUE  to  tell  find_package()  calls  to  resolve symbolic links in the value of
       <PackageName>_DIR.

       This is helpful in use cases where the package search path points at a proxy directory  in
       which  symlinks  to  the  real  package  locations appear.  This is not enabled by default
       because there are also common use cases in which the symlinks should be preserved.

   CMAKE_FIND_PACKAGE_TARGETS_GLOBAL
       New in version 3.24.

       Setting to TRUE promotes all IMPORTED targets discoverd  by  find_package()  to  a  GLOBAL
       scope.

       Setting  this  to  TRUE  is  akin  to  specifying GLOBAL as an argument to find_package().
       Default value is OFF.

   CMAKE_FIND_PACKAGE_WARN_NO_MODULE
       Tell find_package() to warn if called without an explicit mode.

       If find_package() is called without an explicit mode option (MODULE, CONFIG, or NO_MODULE)
       and  no  Find<pkg>.cmake module is in CMAKE_MODULE_PATH then CMake implicitly assumes that
       the  caller  intends  to  search  for  a  package  configuration  file.   If  no   package
       configuration  file is found then the wording of the failure message must account for both
       the case that the package is really missing and the case that the project has  a  bug  and
       failed  to  provide the intended Find module.  If instead the caller specifies an explicit
       mode option then the failure message can be more specific.

       Set CMAKE_FIND_PACKAGE_WARN_NO_MODULE to TRUE to  tell  find_package()  to  warn  when  it
       implicitly  assumes Config mode.  This helps developers enforce use of an explicit mode in
       all calls to find_package() within a project.

       This variable has no effect if CMAKE_FIND_PACKAGE_PREFER_CONFIG is set to TRUE.

   CMAKE_FIND_ROOT_PATH
       Semicolon-separated list of root paths to search on the filesystem.

       This variable is most useful when cross-compiling. CMake uses the paths in  this  list  as
       alternative roots to find filesystem items with find_package(), find_library() etc.

   CMAKE_FIND_ROOT_PATH_MODE_INCLUDE
       This  variable  controls  whether  the  CMAKE_FIND_ROOT_PATH and CMAKE_SYSROOT are used by
       find_file() and find_path().

       If set to ONLY, then only the roots in CMAKE_FIND_ROOT_PATH will be searched.  If  set  to
       NEVER,  then  the  roots  in CMAKE_FIND_ROOT_PATH will be ignored and only the host system
       root will be used. If  set  to  BOTH,  then  the  host  system  paths  and  the  paths  in
       CMAKE_FIND_ROOT_PATH will be searched.

   CMAKE_FIND_ROOT_PATH_MODE_LIBRARY
       This  variable  controls  whether  the  CMAKE_FIND_ROOT_PATH and CMAKE_SYSROOT are used by
       find_library().

       If set to ONLY, then only the roots in CMAKE_FIND_ROOT_PATH will be searched.  If  set  to
       NEVER,  then  the  roots  in CMAKE_FIND_ROOT_PATH will be ignored and only the host system
       root will be used. If  set  to  BOTH,  then  the  host  system  paths  and  the  paths  in
       CMAKE_FIND_ROOT_PATH will be searched.

   CMAKE_FIND_ROOT_PATH_MODE_PACKAGE
       This  variable  controls  whether  the  CMAKE_FIND_ROOT_PATH and CMAKE_SYSROOT are used by
       find_package().

       If set to ONLY, then only the roots in CMAKE_FIND_ROOT_PATH will be searched.  If  set  to
       NEVER,  then  the  roots  in CMAKE_FIND_ROOT_PATH will be ignored and only the host system
       root will be used. If  set  to  BOTH,  then  the  host  system  paths  and  the  paths  in
       CMAKE_FIND_ROOT_PATH will be searched.

   CMAKE_FIND_ROOT_PATH_MODE_PROGRAM
       This  variable  controls  whether  the  CMAKE_FIND_ROOT_PATH and CMAKE_SYSROOT are used by
       find_program().

       If set to ONLY, then only the roots in CMAKE_FIND_ROOT_PATH will be searched.  If  set  to
       NEVER,  then  the  roots  in CMAKE_FIND_ROOT_PATH will be ignored and only the host system
       root will be used. If  set  to  BOTH,  then  the  host  system  paths  and  the  paths  in
       CMAKE_FIND_ROOT_PATH will be searched.

   CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH
       New in version 3.16.

       Controls the default behavior of the following commands for whether or not to search paths
       provided by cmake-specific environment variables:

       • find_program()find_library()find_file()find_path()find_package()

       This is useful in cross-compiling environments.

       By default this variable is not set, which is equivalent to it having  a  value  of  TRUE.
       Explicit options given to the above commands take precedence over this variable.

       See      also     the     CMAKE_FIND_USE_CMAKE_PATH,     CMAKE_FIND_USE_CMAKE_SYSTEM_PATH,
       CMAKE_FIND_USE_INSTALL_PREFIX,                     CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY,        CMAKE_FIND_USE_PACKAGE_REGISTRY,        and
       CMAKE_FIND_USE_PACKAGE_ROOT_PATH variables.

   CMAKE_FIND_USE_CMAKE_PATH
       New in version 3.16.

       Controls the default behavior of the following commands for whether or not to search paths
       provided by cmake-specific cache variables:

       • find_program()find_library()find_file()find_path()find_package()

       This is useful in cross-compiling environments.

       By  default  this  variable  is not set, which is equivalent to it having a value of TRUE.
       Explicit options given to the above commands take precedence over this variable.

       See  also  the  CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,   CMAKE_FIND_USE_CMAKE_SYSTEM_PATH,
       CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,            CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY,
       CMAKE_FIND_USE_PACKAGE_REGISTRY, and CMAKE_FIND_USE_PACKAGE_ROOT_PATH variables.

   CMAKE_FIND_USE_CMAKE_SYSTEM_PATH
       New in version 3.16.

       Controls the default behavior of the following commands for whether or not to search paths
       provided by platform-specific cmake variables:

       • find_program()find_library()find_file()find_path()find_package()

       This is useful in cross-compiling environments.

       By  default  this  variable  is not set, which is equivalent to it having a value of TRUE.
       Explicit options given to the above commands take precedence over this variable.

       See    also    the    CMAKE_FIND_USE_CMAKE_PATH,    CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_INSTALL_PREFIX,                     CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY,        CMAKE_FIND_USE_PACKAGE_REGISTRY,        and
       CMAKE_FIND_USE_PACKAGE_ROOT_PATH variables.

   CMAKE_FIND_USE_INSTALL_PREFIX
       New in version 3.24.

       Controls  the  default behavior of the following commands for whether or not to search the
       locations in the CMAKE_INSTALL_PREFIX and CMAKE_STAGING_PREFIX variables.

       • find_program()find_library()find_file()find_path()find_package()

       This is useful in cross-compiling environments.

       Due to backwards compatibility with CMAKE_FIND_NO_INSTALL_PREFIX, the behavior of the find
       command change based on if this variable exists.

                ┌──────────────────────────────┬──────────────────────────────┬────────┐
                │CMAKE_FIND_USE_INSTALL_PREFIX │ CMAKE_FIND_NO_INSTALL_PREFIX │ Search │
                ├──────────────────────────────┼──────────────────────────────┼────────┤
                │Not Defined                   │ On                           │ NO     │
                ├──────────────────────────────┼──────────────────────────────┼────────┤
                │Not Defined                   │ Off || Not Defined           │ YES    │
                ├──────────────────────────────┼──────────────────────────────┼────────┤
                │Off                           │ On                           │ NO     │
                ├──────────────────────────────┼──────────────────────────────┼────────┤
                │Off                           │ Off || Not Defined           │ NO     │
                ├──────────────────────────────┼──────────────────────────────┼────────┤
                │On                            │ On                           │ YES    │
                ├──────────────────────────────┼──────────────────────────────┼────────┤
                │On                            │ Off || Not Defined           │ YES    │
                └──────────────────────────────┴──────────────────────────────┴────────┘

       By default this variable is not defined. Explicit options given to the above commands take
       precedence over this variable.

       See    also    the    CMAKE_FIND_USE_CMAKE_PATH,    CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,            CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY,
       CMAKE_FIND_USE_PACKAGE_REGISTRY, and CMAKE_FIND_USE_PACKAGE_ROOT_PATH variables.

   CMAKE_FIND_USE_PACKAGE_REGISTRY
       New in version 3.16.

       Controls the default behavior of the find_package() command for whether or not  to  search
       paths provided by the User Package Registry.

       By  default this variable is not set and the behavior will fall back to that determined by
       the deprecated CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY variable.  If that is also not  set,
       then    find_package()    will    use    the    User    Package    Registry   unless   the
       NO_CMAKE_PACKAGE_REGISTRY option is provided.

       This variable takes precedence over CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY when  both  are
       set.

       In  some  cases, for example to locate only system wide installations, it is not desirable
       to  use   the   User   Package   Registry   when   searching   for   packages.    If   the
       CMAKE_FIND_USE_PACKAGE_REGISTRY  variable  is  FALSE, all the find_package() commands will
       skip the User Package Registry as if they were called with  the  NO_CMAKE_PACKAGE_REGISTRY
       argument.

       See   also   Disabling   the   Package   Registry   and   the   CMAKE_FIND_USE_CMAKE_PATH,
       CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,                      CMAKE_FIND_USE_INSTALL_PREFIX,
       CMAKE_FIND_USE_CMAKE_SYSTEM_PATH,                  CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY, and CMAKE_FIND_USE_PACKAGE_ROOT_PATH variables.

   CMAKE_FIND_USE_PACKAGE_ROOT_PATH
       New in version 3.16.

       Controls the default behavior of the following commands for whether or not to search paths
       provided by <PackageName>_ROOT variables:

       • find_program()find_library()find_file()find_path()find_package()

       By  default  this  variable  is not set, which is equivalent to it having a value of TRUE.
       Explicit options given to the above commands take precedence over this variable.

       See    also    the    CMAKE_FIND_USE_CMAKE_PATH,    CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_INSTALL_PREFIX,                           CMAKE_FIND_USE_CMAKE_SYSTEM_PATH,
       CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,    CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY,     and
       CMAKE_FIND_USE_PACKAGE_REGISTRY variables.

   CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH
       New in version 3.16.

       Controls the default behavior of the following commands for whether or not to search paths
       provided by standard system environment variables:

       • find_program()find_library()find_file()find_path()find_package()

       This is useful in cross-compiling environments.

       By default this variable is not set, which is equivalent to it having  a  value  of  TRUE.
       Explicit options given to the above commands take precedence over this variable.

       See    also    the    CMAKE_FIND_USE_CMAKE_PATH,    CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_INSTALL_PREFIX,                           CMAKE_FIND_USE_CMAKE_SYSTEM_PATH,
       CMAKE_FIND_USE_PACKAGE_REGISTRY,           CMAKE_FIND_USE_PACKAGE_ROOT_PATH,           and
       CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY variables.

   CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY
       New in version 3.16.

       Controls searching the System Package Registry by the find_package() command.

       By default this variable is not set and the behavior will fall back to that determined  by
       the  deprecated  CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY  variable.  If that is also
       not  set,  then  find_package()  will  use  the  System  Package   Registry   unless   the
       NO_CMAKE_SYSTEM_PACKAGE_REGISTRY option is provided.

       This  variable  takes  precedence  over CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY when
       both are set.

       In some cases, for example to locate only user specific installations, it is not desirable
       to   use   the   System   Package   Registry   when   searching   for   packages.  If  the
       CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY variable is FALSE, all the find_package()  commands
       will   skip   the   System   Package   Registry   as   if   they   were  called  with  the
       NO_CMAKE_SYSTEM_PACKAGE_REGISTRY argument.

       See also Disabling the Package Registry.

       See    also    the    CMAKE_FIND_USE_CMAKE_PATH,    CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH,
       CMAKE_FIND_USE_INSTALL_PREFIX,                           CMAKE_FIND_USE_CMAKE_SYSTEM_PATH,
       CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH,        CMAKE_FIND_USE_PACKAGE_REGISTRY,        and
       CMAKE_FIND_USE_PACKAGE_ROOT_PATH variables.

   CMAKE_FRAMEWORK_PATH
       Semicolon-separated list of directories specifying a search path for macOS frameworks used
       by the find_library(), find_package(), find_path(), and find_file() commands.

       There is also an environment variable CMAKE_FRAMEWORK_PATH, which is used as an additional
       list of search directories.

   CMAKE_IGNORE_PATH
       Semicolon-separated list of directories to be ignored by the various find...() commands.

       For find_program(), find_library(), find_file(), and find_path(), any file found in one of
       the listed directories will be ignored. The listed directories do not  apply  recursively,
       so  any  subdirectories  to  be ignored must also be explicitly listed.  CMAKE_IGNORE_PATH
       does not affect the search prefixes used by these  four  commands.  To  ignore  individual
       paths  under  a  search prefix (e.g. bin, include, lib, etc.), each path must be listed in
       CMAKE_IGNORE_PATH as a  full  absolute  path.  CMAKE_IGNORE_PREFIX_PATH  provides  a  more
       appropriate way to ignore a whole search prefix.

       find_package()  is  also affected by CMAKE_IGNORE_PATH, but only for Config mode searches.
       Any  <Name>Config.cmake  or  <name>-config.cmake  file  found  in  one  of  the  specified
       directories  will  be  ignored.  In addition, any search prefix found in CMAKE_IGNORE_PATH
       will be skipped for backward compatibility reasons, but new  code  should  prefer  to  use
       CMAKE_IGNORE_PREFIX_PATH to ignore prefixes instead.

       Ignoring  search locations can be useful in cross-compiling environments where some system
       directories contain  incompatible  but  possibly  linkable  libraries.   For  example,  on
       cross-compiled  cluster  environments, this allows a user to ignore directories containing
       libraries meant for the front-end machine.

       By default, CMAKE_IGNORE_PATH is empty. It is intended to be set by the project or the end
       user.

       See also the following variables:

       • CMAKE_IGNORE_PREFIX_PATHCMAKE_SYSTEM_IGNORE_PATHCMAKE_PREFIX_PATHCMAKE_LIBRARY_PATHCMAKE_INCLUDE_PATHCMAKE_PROGRAM_PATH

   CMAKE_IGNORE_PREFIX_PATH
       New in version 3.23.

       Semicolon-separated  list  of  search  prefixes  to  be  ignored  by  the  find_program(),
       find_library(), find_file(), and find_path() commands.  The prefixes are also  ignored  by
       the  Config  mode  of  the  find_package() command (Module mode is unaffected).  To ignore
       specific directories instead, see CMAKE_IGNORE_PATH.

       Ignoring search locations can be useful in cross-compiling environments where some  system
       directories  contain  incompatible  but  possibly  linkable  libraries.   For  example, on
       cross-compiled cluster environments, this allows a user to ignore  directories  containing
       libraries meant for the front-end machine.

       By  default, CMAKE_IGNORE_PREFIX_PATH is empty. It is intended to be set by the project or
       the end user.

       See also the following variables:

       • CMAKE_IGNORE_PATHCMAKE_SYSTEM_IGNORE_PREFIX_PATHCMAKE_PREFIX_PATHCMAKE_LIBRARY_PATHCMAKE_INCLUDE_PATHCMAKE_PROGRAM_PATH

   CMAKE_INCLUDE_DIRECTORIES_BEFORE
       Whether to append or prepend directories by default in include_directories().

       This variable affects the default behavior of the include_directories() command.   Setting
       this variable to ON is equivalent to using the BEFORE option in all uses of that command.

   CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE
       Whether to force prepending of project include directories.

       This  variable  affects  the  order  of  include directories generated in compiler command
       lines.  If set to ON, it causes the CMAKE_SOURCE_DIR and the  CMAKE_BINARY_DIR  to  appear
       first.

   CMAKE_INCLUDE_PATH
       Semicolon-separated  list  of directories specifying a search path for the find_file() and
       find_path() commands.  By default it is empty, it is intended to be set by the project.

       There is also an environment variable CMAKE_INCLUDE_PATH, which is used as  an  additional
       list of search directories.

       See also CMAKE_SYSTEM_INCLUDE_PATH and CMAKE_PREFIX_PATH.

   CMAKE_INSTALL_DEFAULT_COMPONENT_NAME
       Default component used in install() commands.

       If  an  install()  command  is  used  without  the COMPONENT argument, these files will be
       grouped into a default component.  The name of this  default  install  component  will  be
       taken from this variable.  It defaults to Unspecified.

   CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS
       New in version 3.11.

       Default  permissions  for  directories  created implicitly during installation of files by
       install() and file(INSTALL).

       If make install is invoked and directories are implicitly created they get permissions set
       by  CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS  variable  or  platform  specific  default
       permissions if the variable is not set.

       Implicitly created directories are  created  if  they  are  not  explicitly  installed  by
       install()  command  but  are  needed  to install a file on a certain path. Example of such
       locations are directories created due to the setting of CMAKE_INSTALL_PREFIX.

       Expected content of the CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS variable is a list  of
       permissions that can be used by install() command PERMISSIONS section.

       Example usage:

          set(CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS
               OWNER_READ
               OWNER_WRITE
               OWNER_EXECUTE
               GROUP_READ
             )

   CMAKE_INSTALL_MESSAGE
       New in version 3.1.

       Specify  verbosity  of  installation script code generated by the install() command (using
       the file(INSTALL) command).  For paths that are newly installed or  updated,  installation
       may print lines like:

          -- Installing: /some/destination/path

       For paths that are already up to date, installation may print lines like:

          -- Up-to-date: /some/destination/path

       The CMAKE_INSTALL_MESSAGE variable may be set to control which messages are printed:

       ALWAYS Print both Installing and Up-to-date messages.

       LAZY   Print Installing but not Up-to-date messages.

       NEVER  Print neither Installing nor Up-to-date messages.

       Other values have undefined behavior and may not be diagnosed.

       If this variable is not set, the default behavior is ALWAYS.

   CMAKE_INSTALL_PREFIX
       Install directory used by install().

       If  make  install  is  invoked  or  INSTALL is built, this directory is prepended onto all
       install directories.   This  variable  defaults  to  /usr/local  on  UNIX  and  c:/Program
       Files/${PROJECT_NAME} on Windows.  See CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT for how
       a project might choose its own default.

       On UNIX one can use the DESTDIR mechanism in order to relocate the whole installation to a
       staging area.  See the DESTDIR environment variable for more information.

       The  installation prefix is also added to CMAKE_SYSTEM_PREFIX_PATH so that find_package(),
       find_program(), find_library(), find_path(), and find_file() will search  the  prefix  for
       other  software. This behavior can be disabled by setting the CMAKE_FIND_NO_INSTALL_PREFIX
       to TRUE before the first project() invocation.

       NOTE:
          Use  the  GNUInstallDirs  module  to  provide  GNU-style  options  for  the  layout  of
          directories within the installation.

       The  CMAKE_INSTALL_PREFIX  may  be  defined  when  configuring  a  build  tree  to set its
       installation prefix.  Or, when using the cmake(1) command-line tool's --install mode,  one
       may specify a different prefix using the --prefix option:

          cmake --install . --prefix /my/install/prefix

   CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT
       New in version 3.7.1.

       CMake  sets  this  variable  to  a  TRUE value when the CMAKE_INSTALL_PREFIX has just been
       initialized to its default value, typically on the first run of CMake within a  new  build
       tree.   This  can  be  used  by  project  code  to change the default without overriding a
       user-provided value:

          if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
            set(CMAKE_INSTALL_PREFIX "/my/default" CACHE PATH "..." FORCE)
          endif()

   CMAKE_KATE_FILES_MODE
       New in version 3.27.

       This cache variable is used by the Kate project generator and controls to  what  mode  the
       files entry in the project file will be set.  See cmake-generators(7).

       Possible values are AUTO, SVN, GIT, HG, FOSSIL and LIST.

       When  set  to  LIST, CMake will put the list of source files known to CMake in the project
       file.  When set to  SVN,  GIT,  HG  or  FOSSIL,  CMake  will  set  the  generated  project
       accordingly to Subversion, git, Mercurial or Fossil, and Kate will then use the respective
       command line tool to retrieve the list of files in the project.   When  unset  or  set  to
       AUTO,  CMake  will  try  to  detect  whether  the source directory is part of a git or svn
       checkout or not, and put the respective entry into the project file.

   CMAKE_KATE_MAKE_ARGUMENTS
       New in version 3.0.

       This cache variable is used by the Kate project generator.  See cmake-generators(7).

       This variable holds arguments which are used when Kate invokes the make tool.  By  default
       it is initialized to hold flags to enable parallel builds (using -j typically).

   CMAKE_LIBRARY_PATH
       Semicolon-separated  list  of  directories specifying a search path for the find_library()
       command.  By default it is empty, it is intended to be set by the project.

       There is also an environment variable CMAKE_LIBRARY_PATH, which is used as  an  additional
       list of search directories.

       See also CMAKE_SYSTEM_LIBRARY_PATH and CMAKE_PREFIX_PATH.

   CMAKE_LINK_DIRECTORIES_BEFORE
       New in version 3.13.

       Whether to append or prepend directories by default in link_directories().

       This  variable  affects  the  default behavior of the link_directories() command.  Setting
       this variable to ON is equivalent to using the BEFORE option in all uses of that command.

   CMAKE_LINK_LIBRARIES_ONLY_TARGETS
       New in version 3.23.

       Set this variable to initialize the LINK_LIBRARIES_ONLY_TARGETS property  of  non-imported
       targets  when  they  are created.  Setting it to true enables an additional check that all
       items named by target_link_libraries() that can be target  names  are  actually  names  of
       existing targets.  See the target property documentation for details.

   CMAKE_MAXIMUM_RECURSION_DEPTH
       New in version 3.14.

       Maximum  recursion  depth  for CMake scripts. It is intended to be set on the command line
       with  -DCMAKE_MAXIMUM_RECURSION_DEPTH=<x>,  or  within  CMakeLists.txt  by  projects  that
       require  a  large recursion depth. Projects that set this variable should provide the user
       with a way to override it. For example:

          # About to perform deeply recursive actions
          if(NOT CMAKE_MAXIMUM_RECURSION_DEPTH)
            set(CMAKE_MAXIMUM_RECURSION_DEPTH 2000)
          endif()

       If it is not set, or is set to a non-integer value, a sensible default limit is  used.  If
       the recursion limit is reached, the script terminates immediately with a fatal error.

       Calling any of the following commands increases the recursion depth:

       • include()find_package()add_subdirectory()try_compile()ctest_read_custom_files()ctest_run_script() (unless NEW_PROCESS is specified)

       • User-defined  function()'s  and  macro()'s  (note that function() and macro() themselves
         don't increase recursion depth)

       • Reading or writing variables that are being watched by a variable_watch()

       See also the CMAKE_MAXIMUM_RECURSION_DEPTH environment variable.

   CMAKE_MESSAGE_CONTEXT
       New in version 3.17.

       When   enabled   by   the   cmake   --log-context   command    line    option    or    the
       CMAKE_MESSAGE_CONTEXT_SHOW     variable,    the    message()    command    converts    the
       CMAKE_MESSAGE_CONTEXT list into a dot-separated string surrounded by square  brackets  and
       prepends it to each line for messages of log levels NOTICE and below.

       For logging contexts to work effectively, projects should generally APPEND and POP_BACK an
       item to the current value of  CMAKE_MESSAGE_CONTEXT  rather  than  replace  it.   Projects
       should not assume the message context at the top of the source tree is empty, as there are
       scenarios where the context might have already been set (e.g. hierarchical projects).

       WARNING:
          Valid context names are restricted to anything that could be used as a  CMake  variable
          name.   All  names that begin with an underscore or the string cmake_ are also reserved
          for use by CMake and should not be used by projects.

       Example:

          function(bar)
            list(APPEND CMAKE_MESSAGE_CONTEXT "bar")
            message(VERBOSE "bar VERBOSE message")
          endfunction()

          function(baz)
            list(APPEND CMAKE_MESSAGE_CONTEXT "baz")
            message(DEBUG "baz DEBUG message")
          endfunction()

          function(foo)
            list(APPEND CMAKE_MESSAGE_CONTEXT "foo")
            bar()
            message(TRACE "foo TRACE message")
            baz()
          endfunction()

          list(APPEND CMAKE_MESSAGE_CONTEXT "top")

          message(VERBOSE "Before `foo`")
          foo()
          message(VERBOSE "After `foo`")

          list(POP_BACK CMAKE_MESSAGE_CONTEXT)

       Which results in the following output:

          -- [top] Before `foo`
          -- [top.foo.bar] bar VERBOSE message
          -- [top.foo] foo TRACE message
          -- [top.foo.baz] baz DEBUG message
          -- [top] After `foo`

   CMAKE_MESSAGE_CONTEXT_SHOW
       New in version 3.17.

       Setting this variable to true enables showing a context  with  each  line  logged  by  the
       message() command (see CMAKE_MESSAGE_CONTEXT for how the context itself is specified).

       This variable is an alternative to providing the --log-context option on the cmake command
       line.  Whereas the command line option will apply only to  that  one  CMake  run,  setting
       CMAKE_MESSAGE_CONTEXT_SHOW  to  true as a cache variable will ensure that subsequent CMake
       runs will continue to show the message context.

       Projects should not set CMAKE_MESSAGE_CONTEXT_SHOW.  It is intended for users so that they
       may control whether or not to include context with messages.

   CMAKE_MESSAGE_INDENT
       New in version 3.16.

       The  message()  command  joins the strings from this list and for log levels of NOTICE and
       below, it prepends the resultant string to each line of the message.

       Example:

          list(APPEND listVar one two three)

          message(VERBOSE [[Collected items in the "listVar":]])
          list(APPEND CMAKE_MESSAGE_INDENT "  ")

          foreach(item IN LISTS listVar)
            message(VERBOSE ${item})
          endforeach()

          list(POP_BACK CMAKE_MESSAGE_INDENT)
          message(VERBOSE "No more indent")

       Which results in the following output:

          -- Collected items in the "listVar":
          --   one
          --   two
          --   three
          -- No more indent

   CMAKE_MESSAGE_LOG_LEVEL
       New in version 3.17.

       When set, this variable specifies the logging level used by the message() command.   Valid
       values  are  the  same  as  those  for the --log-level command line option of the cmake(1)
       program.  If this variable is set and the --log-level command line option  is  given,  the
       command line option takes precedence.

       The  main  advantage  to  using this variable is to make a log level persist between CMake
       runs.  Setting it as a cache variable will ensure that subsequent CMake runs will continue
       to use the chosen log level.

       Projects  should  not set this variable, it is intended for users so that they may control
       the log level according to their own needs.

       New in version 3.25: See the cmake_language() cmake_language command for a  way  to  query
       the current message logging level.

   CMAKE_MFC_FLAG
       Use the MFC library for an executable or dll.

       Enables  the use of the Microsoft Foundation Classes (MFC).  It should be set to 1 for the
       static MFC library, and 2 for the shared MFC library.   This  is  used  in  Visual  Studio
       project files.

       Usage example:

          add_definitions(-D_AFXDLL)
          set(CMAKE_MFC_FLAG 2)
          add_executable(CMakeSetup WIN32 ${SRCS})

       Contents of CMAKE_MFC_FLAG may use generator expressions.

   CMAKE_MODULE_PATH
       Semicolon-separated  list  of directories, represented using forward slashes, specifying a
       search path for CMake modules to be loaded by the  include()  or  find_package()  commands
       before  checking  the default modules that come with CMake. By default it is empty.  It is
       intended to be set by the project.

   CMAKE_POLICY_DEFAULT_CMP<NNNN>
       Default for CMake Policy CMP<NNNN> when it is otherwise left unset.

       Commands  cmake_minimum_required(VERSION)  and  cmake_policy(VERSION)  by  default   leave
       policies  introduced after the given version unset.  Set CMAKE_POLICY_DEFAULT_CMP<NNNN> to
       OLD or NEW to specify the default for policy CMP<NNNN>, where <NNNN> is the policy number.

       This variable should not be set by a project in CMake  code  as  a  way  to  set  its  own
       policies;  use  cmake_policy(SET)  instead.   This  variable  is  meant  to externally set
       policies for which a project has not itself been updated:

       • Users   running   CMake    may    set    this    variable    in    the    cache    (e.g.
         -DCMAKE_POLICY_DEFAULT_CMP<NNNN>=<OLD|NEW>).   Set  it  to OLD to quiet a policy warning
         while using old behavior or to NEW to try building the project with new behavior.

       • Projects may set  this  variable  before  a  call  to  add_subdirectory()  that  adds  a
         third-party project in order to set its policies without modifying third-party code.

   CMAKE_POLICY_WARNING_CMP<NNNN>
       Explicitly  enable  or  disable  the  warning when CMake Policy CMP<NNNN> has not been set
       explicitly by cmake_policy() or implicitly by cmake_minimum_required(). This is meaningful
       only for the policies that do not warn by default:

       • CMAKE_POLICY_WARNING_CMP0025 controls the warning for policy CMP0025.

       • CMAKE_POLICY_WARNING_CMP0047 controls the warning for policy CMP0047.

       • CMAKE_POLICY_WARNING_CMP0056 controls the warning for policy CMP0056.

       • CMAKE_POLICY_WARNING_CMP0060 controls the warning for policy CMP0060.

       • CMAKE_POLICY_WARNING_CMP0065 controls the warning for policy CMP0065.

       • CMAKE_POLICY_WARNING_CMP0066 controls the warning for policy CMP0066.

       • CMAKE_POLICY_WARNING_CMP0067 controls the warning for policy CMP0067.

       • CMAKE_POLICY_WARNING_CMP0082 controls the warning for policy CMP0082.

       • CMAKE_POLICY_WARNING_CMP0089 controls the warning for policy CMP0089.

       • CMAKE_POLICY_WARNING_CMP0102 controls the warning for policy CMP0102.

       • CMAKE_POLICY_WARNING_CMP0112 controls the warning for policy CMP0112.

       • CMAKE_POLICY_WARNING_CMP0116 controls the warning for policy CMP0116.

       • CMAKE_POLICY_WARNING_CMP0126 controls the warning for policy CMP0126.

       • CMAKE_POLICY_WARNING_CMP0128 controls the warning for policy CMP0128.

       • CMAKE_POLICY_WARNING_CMP0129 controls the warning for policy CMP0129.

       • CMAKE_POLICY_WARNING_CMP0133 controls the warning for policy CMP0133.

       This  variable  should  not be set by a project in CMake code.  Project developers running
       CMake  may  set  this  variable   in   their   cache   to   enable   the   warning   (e.g.
       -DCMAKE_POLICY_WARNING_CMP<NNNN>=ON).     Alternatively,   running   cmake(1)   with   the
       --debug-output, --trace, or --trace-expand option will also enable the warning.

   CMAKE_PREFIX_PATH
       Semicolon-separated list of directories specifying installation prefixes to be searched by
       the find_package(), find_program(), find_library(), find_file(), and find_path() commands.
       Each command will add appropriate subdirectories (like bin, lib, or include) as  specified
       in its own documentation.

       By default this is empty.  It is intended to be set by the project.

       There  is  also  an environment variable CMAKE_PREFIX_PATH, which is used as an additional
       list of search prefixes.

       See     also     CMAKE_SYSTEM_PREFIX_PATH,     CMAKE_INCLUDE_PATH,     CMAKE_LIBRARY_PATH,
       CMAKE_PROGRAM_PATH, and CMAKE_IGNORE_PATH.

   CMAKE_PROGRAM_PATH
       Semicolon-separated  list  of  directories specifying a search path for the find_program()
       command.  By default it is empty, it is intended to be set by the project.

       There is also an environment variable CMAKE_PROGRAM_PATH, which is used as  an  additional
       list of search directories.

       See also CMAKE_SYSTEM_PROGRAM_PATH and CMAKE_PREFIX_PATH.

   CMAKE_PROJECT_INCLUDE
       New in version 3.15.

       A  CMake  language file or module to be included as the last step of all project() command
       calls.  This is intended for injecting custom code into project builds  without  modifying
       their  source.   See  Code  Injection  for a more detailed discussion of files potentially
       included during a project() call.

       See              also              the               CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE,
       CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE,       CMAKE_PROJECT_INCLUDE_BEFORE,       and
       CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

   CMAKE_PROJECT_INCLUDE_BEFORE
       New in version 3.15.

       A CMake language file or module to be included as the first step of all project()  command
       calls.   This  is intended for injecting custom code into project builds without modifying
       their source.  See Code Injection for a more  detailed  discussion  of  files  potentially
       included during a project() call.

       See               also              the              CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE,
       CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE,          CMAKE_PROJECT_INCLUDE,           and
       CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

   CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE
       A  CMake  language file or module to be included as the last step of any project() command
       calls that specify <PROJECT-NAME> as the project name.  This  is  intended  for  injecting
       custom  code into project builds without modifying their source.  See Code Injection for a
       more detailed discussion of files potentially included during a project() call.

       See   also   the    CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE,    CMAKE_PROJECT_INCLUDE,
       CMAKE_PROJECT_INCLUDE_BEFORE, and CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

   CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE
       New in version 3.17.

       A  CMake language file or module to be included as the first step of any project() command
       calls that specify <PROJECT-NAME> as the project name.  This  is  intended  for  injecting
       custom  code into project builds without modifying their source.  See Code Injection for a
       more detailed discussion of files potentially included during a project() call.

       See     also     the     CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE,      CMAKE_PROJECT_INCLUDE,
       CMAKE_PROJECT_INCLUDE_BEFORE, and CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

   CMAKE_PROJECT_TOP_LEVEL_INCLUDES
       New in version 3.24.

       Semicolon-separated  list  of  CMake  language  files to include as part of the very first
       project() call.  The files will be included immediately after the toolchain file has  been
       read  (if one is specified) and platform variables have been set, but before any languages
       have  been  enabled.  Therefore,  language-specific  variables,  including   things   like
       CMAKE_<LANG>_COMPILER,  might  not  be  set.   See  Code  Injection  for  a  more detailed
       discussion of files potentially included during a project() call.

       This variable is intended for specifying files that perform one-time setup for the  build.
       It  provides an injection point for things like configuring package managers, adding logic
       the user shares between projects (e.g. defining their own custom build types), and so  on.
       It  is  primarily  for  users  to  add  things  specific to their environment, but not for
       specifying the toolchain details (use CMAKE_TOOLCHAIN_FILE for that).

       By default, this variable is empty.  It is intended to be set by the user.

       See       also       the       CMAKE_PROJECT_INCLUDE,        CMAKE_PROJECT_INCLUDE_BEFORE,
       CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE,    and   CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE
       variables.

   CMAKE_REQUIRE_FIND_PACKAGE_<PackageName>
       New in version 3.22.

       Variable for making find_package() call REQUIRED.

       Every non-REQUIRED find_package() call in a project can be turned into REQUIRED by setting
       the variable CMAKE_REQUIRE_FIND_PACKAGE_<PackageName> to TRUE.  This can be used to assert
       assumptions about build environment and to ensure the build will fail early if they do not
       hold.

       See also the CMAKE_DISABLE_FIND_PACKAGE_<PackageName> variable.

   CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
       Don't make the install target depend on the all target.

       By  default, the install target depends on the all target.  This has the effect, that when
       make install is invoked or INSTALL is built, first the  all  target  is  built,  then  the
       installation starts.  If CMAKE_SKIP_INSTALL_ALL_DEPENDENCY is set to TRUE, this dependency
       is not created, so the installation  process  will  start  immediately,  independent  from
       whether the project has been completely built or not.

   CMAKE_STAGING_PREFIX
       This  variable may be set to a path to install to when cross-compiling. This can be useful
       if the path in CMAKE_SYSROOT is read-only, or otherwise should remain pristine.

       The CMAKE_STAGING_PREFIX location is also used as a search prefix by the find_*  commands.
       This can be controlled by setting the CMAKE_FIND_NO_INSTALL_PREFIX variable.

       If  any  RPATH/RUNPATH  entries passed to the linker contain the CMAKE_STAGING_PREFIX, the
       matching path fragments are replaced with the CMAKE_INSTALL_PREFIX.

   CMAKE_SUBLIME_TEXT_2_ENV_SETTINGS
       New in version 3.8.

       This variable contains a list of env vars as a list of tokens with the syntax var=value.

       Example:

          set(CMAKE_SUBLIME_TEXT_2_ENV_SETTINGS
             "FOO=FOO1\;FOO2\;FOON"
             "BAR=BAR1\;BAR2\;BARN"
             "BAZ=BAZ1\;BAZ2\;BAZN"
             "FOOBAR=FOOBAR1\;FOOBAR2\;FOOBARN"
             "VALID="
             )

       In case of malformed variables CMake will fail:

          set(CMAKE_SUBLIME_TEXT_2_ENV_SETTINGS
              "THIS_IS_NOT_VALID"
              )

   CMAKE_SUBLIME_TEXT_2_EXCLUDE_BUILD_TREE
       New in version 3.8.

       If this variable evaluates to ON at the end of  the  top-level  CMakeLists.txt  file,  the
       Sublime  Text 2 extra generator excludes the build tree from the .sublime-project if it is
       inside the source tree.

   CMAKE_SUPPRESS_REGENERATION
       New in version 3.12.

       If CMAKE_SUPPRESS_REGENERATION is OFF, which is default, then CMake adds a special  target
       on  which  all  other  targets  depend that checks the build system and optionally re-runs
       CMake to regenerate the build system when the target specification source changes.

       If this variable evaluates to ON at the end of the top-level  CMakeLists.txt  file,  CMake
       will  not  add  the  regeneration  target  to the build system or perform any build system
       checks.

   CMAKE_SYSROOT
       Path to pass to the compiler in the --sysroot flag.

       The CMAKE_SYSROOT content is passed to the compiler in the --sysroot flag,  if  supported.
       The  path  is  also  stripped  from  the  RPATH/RUNPATH if necessary on installation.  The
       CMAKE_SYSROOT is also used to prefix paths searched by the find_* commands.

       This variable may only be set in a toolchain file specified  by  the  CMAKE_TOOLCHAIN_FILE
       variable.

       See also the CMAKE_SYSROOT_COMPILE and CMAKE_SYSROOT_LINK variables.

   CMAKE_SYSROOT_COMPILE
       New in version 3.9.

       Path  to  pass to the compiler in the --sysroot flag when compiling source files.  This is
       the same as CMAKE_SYSROOT but is used only for compiling sources and not linking.

       This variable may only be set in a toolchain file specified  by  the  CMAKE_TOOLCHAIN_FILE
       variable.

   CMAKE_SYSROOT_LINK
       New in version 3.9.

       Path  to  pass  to  the  compiler in the --sysroot flag when linking.  This is the same as
       CMAKE_SYSROOT but is used only for linking and not compiling sources.

       This variable may only be set in a toolchain file specified  by  the  CMAKE_TOOLCHAIN_FILE
       variable.

   CMAKE_SYSTEM_APPBUNDLE_PATH
       New in version 3.4.

       Search  path  for macOS application bundles used by the find_program(), and find_package()
       commands.  By default it contains the standard directories for the current system.  It  is
       not intended to be modified by the project, use CMAKE_APPBUNDLE_PATH for this.

   CMAKE_SYSTEM_FRAMEWORK_PATH
       New in version 3.4.

       Search  path for macOS frameworks used by the find_library(), find_package(), find_path(),
       and find_file() commands.  By default it contains the standard directories for the current
       system.   It  is  not intended to be modified by the project, use CMAKE_FRAMEWORK_PATH for
       this.

   CMAKE_SYSTEM_IGNORE_PATH
       Semicolon-separated list of directories to be ignored by the various find...() commands.

       For find_program(), find_library(), find_file(), and find_path(), any file found in one of
       the  listed  directories will be ignored. The listed directories do not apply recursively,
       so   any   subdirectories   to   be   ignored   must   also    be    explicitly    listed.
       CMAKE_SYSTEM_IGNORE_PATH  does not affect the search prefixes used by these four commands.
       To ignore individual paths under a search prefix (e.g. bin, include, lib, etc.), each path
       must    be    listed    in    CMAKE_SYSTEM_IGNORE_PATH    as   a   full   absolute   path.
       CMAKE_SYSTEM_IGNORE_PREFIX_PATH provides a more appropriate way to ignore a  whole  search
       prefix.

       find_package()  is  also  affected  by  CMAKE_SYSTEM_IGNORE_PATH, but only for Config mode
       searches. Any <Name>Config.cmake or <name>-config.cmake file found in one of the specified
       directories    will    be   ignored.   In   addition,   any   search   prefix   found   in
       CMAKE_SYSTEM_IGNORE_PATH will be skipped for backward compatibility reasons, but new  code
       should prefer to use CMAKE_SYSTEM_IGNORE_PREFIX_PATH to ignore prefixes instead.

       Ignoring  search locations can be useful in cross-compiling environments where some system
       directories contain  incompatible  but  possibly  linkable  libraries.   For  example,  on
       cross-compiled  cluster  environments, this allows a user to ignore directories containing
       libraries meant for the front-end machine.

       CMAKE_SYSTEM_IGNORE_PATH is populated by CMake as  part  of  its  platform  and  toolchain
       setup.  Its  purpose is to ignore locations containing incompatible binaries meant for the
       host rather than the target platform.  The project or end  user  should  not  modify  this
       variable, they should use CMAKE_IGNORE_PATH instead.

       See also the following variables:

       • CMAKE_SYSTEM_IGNORE_PREFIX_PATHCMAKE_SYSTEM_PREFIX_PATHCMAKE_SYSTEM_LIBRARY_PATHCMAKE_SYSTEM_INCLUDE_PATHCMAKE_SYSTEM_PROGRAM_PATH

   CMAKE_SYSTEM_IGNORE_PREFIX_PATH
       New in version 3.23.

       Semicolon-separated  list  of  search  prefixes  to  be  ignored  by  the  find_program(),
       find_library(), find_file(), and find_path() commands.  The prefixes are also  ignored  by
       the  Config  mode  of  the  find_package() command (Module mode is unaffected).  To ignore
       specific directories instead, see CMAKE_SYSTEM_IGNORE_PATH.

       Ignoring search locations can be useful in cross-compiling environments where some  system
       directories  contain  incompatible  but  possibly  linkable  libraries.   For  example, on
       cross-compiled cluster environments, this allows a user to ignore  directories  containing
       libraries meant for the front-end machine.

       CMAKE_SYSTEM_IGNORE_PREFIX_PATH  is  populated  by  CMake  as  part  of  its  platform and
       toolchain setup. Its purpose is to ignore locations containing incompatible binaries meant
       for  the  host rather than the target platform.  The project or end user should not modify
       this variable, they should use CMAKE_IGNORE_PREFIX_PATH instead.

       See also the following variables:

       • CMAKE_SYSTEM_IGNORE_PATHCMAKE_SYSTEM_PREFIX_PATHCMAKE_SYSTEM_LIBRARY_PATHCMAKE_SYSTEM_INCLUDE_PATHCMAKE_SYSTEM_PROGRAM_PATH

   CMAKE_SYSTEM_INCLUDE_PATH
       Semicolon-separated list of directories specifying a search path for the  find_file()  and
       find_path()  commands.   By default this contains the standard directories for the current
       system.  It is not intended to be modified by  the  project;  use  CMAKE_INCLUDE_PATH  for
       this.  See also CMAKE_SYSTEM_PREFIX_PATH.

   CMAKE_SYSTEM_LIBRARY_PATH
       Semicolon-separated  list  of  directories specifying a search path for the find_library()
       command.  By default this contains the standard directories for the current system.  It is
       not  intended  to  be  modified by the project; use CMAKE_LIBRARY_PATH for this.  See also
       CMAKE_SYSTEM_PREFIX_PATH.

   CMAKE_SYSTEM_PREFIX_PATH
       Semicolon-separated list of directories specifying installation prefixes to be searched by
       the find_package(), find_program(), find_library(), find_file(), and find_path() commands.
       Each command will add appropriate subdirectories (like bin, lib, or include) as  specified
       in its own documentation.

       By   default   this   contains   the  system  directories  for  the  current  system,  the
       CMAKE_INSTALL_PREFIX, and the CMAKE_STAGING_PREFIX.  The installation and staging prefixes
       may  be  excluded  by  setting  the CMAKE_FIND_NO_INSTALL_PREFIX variable before the first
       project() invocation.

       The system directories that are contained in CMAKE_SYSTEM_PREFIX_PATH are  locations  that
       typically  include  installed  software.  An  example  being  /usr/local  for  UNIX  based
       platforms. In addition to standard platform locations,  CMake  will  also  add  values  to
       CMAKE_SYSTEM_PREFIX_PATH  based  on  environment  variables. The environment variables and
       search locations that CMake uses may evolve over time, as platforms and their  conventions
       also  evolve.  The  following  provides  an  indicative  list of environment variables and
       locations that CMake searches, but they are subject to change:

       CrayLinuxEnvironment:ENV{SYSROOT_DIR}/ENV{SYSROOT_DIR}/usrENV{SYSROOT_DIR}/usr/local

       Darwin:ENV{SDKROOT}/usr When CMAKE_OSX_SYSROOT is not explicitly specified.

       OpenBSD:ENV{LOCALBASE}

       Unix:ENV{CONDA_PREFIX} when using a conda compiler

       Windows:ENV{ProgramW6432}ENV{ProgramFiles}ENV{ProgramFiles(x86)}ENV{SystemDrive}/Program FilesENV{SystemDrive}/Program Files (x86)

       CMAKE_SYSTEM_PREFIX_PATH  is  not  intended  to  be   modified   by   the   project;   use
       CMAKE_PREFIX_PATH for this.

       See  also CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_SYSTEM_LIBRARY_PATH, CMAKE_SYSTEM_PROGRAM_PATH,
       and CMAKE_SYSTEM_IGNORE_PATH.

   CMAKE_SYSTEM_PROGRAM_PATH
       Semicolon-separated list of directories specifying a search path  for  the  find_program()
       command.  By default this contains the standard directories for the current system.  It is
       not intended to be modified by the project; use CMAKE_PROGRAM_PATH  for  this.   See  also
       CMAKE_SYSTEM_PREFIX_PATH.

   CMAKE_TLS_CAINFO
       Specify  the  default  value  for the file(DOWNLOAD) and file(UPLOAD) commands' TLS_CAINFO
       options.  It is unset by default.

       This variable is also used by the ExternalProject and FetchContent  modules  for  internal
       calls to file(DOWNLOAD).

   CMAKE_TLS_VERIFY
       Specify  the  default  value  for the file(DOWNLOAD) and file(UPLOAD) commands' TLS_VERIFY
       options.  If not set, the default is off.

       This variable is also used by the ExternalProject and FetchContent  modules  for  internal
       calls to file(DOWNLOAD).

       TLS verification can help provide confidence that one is connecting to the desired server.
       When downloading known content, one should also use file hashes to verify it.

          set(CMAKE_TLS_VERIFY TRUE)

   CMAKE_USER_MAKE_RULES_OVERRIDE
       Specify a CMake file that overrides platform information.

       CMake loads the specified file while enabling support for each language  from  either  the
       project()  or enable_language() commands.  It is loaded after CMake's builtin compiler and
       platform information modules have been loaded but before the  information  is  used.   The
       file   may   set  platform  information  variables  to  override  CMake's  defaults.   See
       CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG> for the language-specific version of this variable.

       This feature is intended for use only in overriding information variables that must be set
       before  CMake  builds  its  first  test  project to check that the compiler for a language
       works.  It should not be used to load a file in cases that a normal include()  will  work.
       Use  it  only  as  a  last resort for behavior that cannot be achieved any other way.  For
       example, one may set the CMAKE_C_FLAGS_INIT variable to change the default value  used  to
       initialize  the  CMAKE_C_FLAGS variable before it is cached.  The override file should NOT
       be used to set anything that could be set after languages are enabled, such  as  variables
       like  CMAKE_RUNTIME_OUTPUT_DIRECTORY  that  affect the placement of binaries.  Information
       set in the file will be used for try_compile() and try_run() builds too.

   CMAKE_WARN_DEPRECATED
       Whether to issue warnings for deprecated functionality.

       If not FALSE, use of deprecated functionality will issue warnings.  If  this  variable  is
       not set, CMake behaves as if it were set to TRUE.

       When  running  cmake(1),  this  option  can  be  enabled  with the -Wdeprecated option, or
       disabled with the -Wno-deprecated option.

   CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
       Ask cmake_install.cmake script to warn each time a file with absolute INSTALL  DESTINATION
       is encountered.

       This  variable  is  used by CMake-generated cmake_install.cmake scripts.  If one sets this
       variable to ON while running the script, it may get warning messages from the script.

   CMAKE_XCODE_GENERATE_SCHEME
       New in version 3.9.

       If enabled, the Xcode generator will generate schema files.  These are  useful  to  invoke
       analyze, archive, build-for-testing and test actions from the command line.

       This variable initializes the XCODE_GENERATE_SCHEME target property on all targets.

   CMAKE_XCODE_GENERATE_TOP_LEVEL_PROJECT_ONLY
       New in version 3.11.

       If  enabled,  the  Xcode  generator will generate only a single Xcode project file for the
       topmost project() command instead of generating one for every project() command.

       This could be useful to speed up the CMake generation  step  for  large  projects  and  to
       work-around a bug in the ZERO_CHECK logic.

   CMAKE_XCODE_LINK_BUILD_PHASE_MODE
       New in version 3.19.

       This  variable  is used to initialize the XCODE_LINK_BUILD_PHASE_MODE property on targets.
       It affects the methods that the Xcode generator uses to link different kinds of libraries.
       Its default value is NONE.

   CMAKE_XCODE_SCHEME_ADDRESS_SANITIZER
       New in version 3.13.

       Whether  to  enable  Address  Sanitizer  in the Diagnostics section of the generated Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_ADDRESS_SANITIZER property on all targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_ADDRESS_SANITIZER_USE_AFTER_RETURN
       New in version 3.13.

       Whether  to  enable  Detect  use  of  stack after return in the Diagnostics section of the
       generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_ADDRESS_SANITIZER_USE_AFTER_RETURN property  on
       all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_DEBUG_DOCUMENT_VERSIONING
       New in version 3.16.

       Whether to enable Allow debugging when using document  Versions  Browser  in  the  Options
       section of the generated Xcode scheme.

       This  variable  initializes  the  XCODE_SCHEME_DEBUG_DOCUMENT_VERSIONING  property  on all
       targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_DISABLE_MAIN_THREAD_CHECKER
       New in version 3.13.

       Whether  to  disable  the  Main Thread Checker in the Diagnostics section of the generated
       Xcode scheme.

       This variable initializes the  XCODE_SCHEME_DISABLE_MAIN_THREAD_CHECKER  property  on  all
       targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_DYNAMIC_LIBRARY_LOADS
       New in version 3.13.

       Whether to enable Dynamic Library Loads in the Diagnostics section of the generated  Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_DYNAMIC_LIBRARY_LOADS property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_DYNAMIC_LINKER_API_USAGE
       New in version 3.13.

       Whether to enable Dynamic Linker API usage in the Diagnostics  section  of  the  generated
       Xcode scheme.

       This  variable  initializes  the  XCODE_SCHEME_DYNAMIC_LINKER_API_USAGE  property  on  all
       targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_ENABLE_GPU_API_VALIDATION
       New in version 3.25.

       Property  value  for  Metal:  API Validation in the Options section of the generated Xcode
       scheme.

       This variable  initializes  the  XCODE_SCHEME_ENABLE_GPU_API_VALIDATION  property  on  all
       targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_ENABLE_GPU_FRAME_CAPTURE_MODE
       New in version 3.23.

       Property value for GPU Frame Capture in the Options section of the generated Xcode scheme.
       Example values are Metal and Disabled.

       This  variable  initializes the XCODE_SCHEME_ENABLE_GPU_FRAME_CAPTURE_MODE property on all
       targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_ENABLE_GPU_SHADER_VALIDATION
       New in version 3.25.

       Property  value for Metal: Shader Validation in the Options section of the generated Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_ENABLE_GPU_SHADER_VALIDATION  property  on  all
       targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_ENVIRONMENT
       New in version 3.17.

       Specify environment variables that should  be  added  to  the  Arguments  section  of  the
       generated Xcode scheme.

       If  set  to  a  list  of  environment  variables  and values of the form MYVAR=value those
       environment variables will be added to the scheme.

       This variable initializes the XCODE_SCHEME_ENVIRONMENT property on all targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_GUARD_MALLOC
       New in version 3.13.

       Whether to enable Guard Malloc in the Diagnostics section of the generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_GUARD_MALLOC property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_LAUNCH_CONFIGURATION
       New in version 3.25.

       Set the build configuration to run the target.

       This variable initializes the XCODE_SCHEME_LAUNCH_CONFIGURATION property on all targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_LAUNCH_MODE
       New in version 3.25.

       Property value for Launch in the Info section of the generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_LAUNCH_MODE property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_MAIN_THREAD_CHECKER_STOP
       New in version 3.13.

       Whether to enable the Main Thread Checker  option  Pause  on  issues  in  the  Diagnostics
       section of the generated Xcode scheme.

       This  variable  initializes  the  XCODE_SCHEME_MAIN_THREAD_CHECKER_STOP  property  on  all
       targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_MALLOC_GUARD_EDGES
       New in version 3.13.

       Whether  to  enable  Malloc  Guard Edges in the Diagnostics section of the generated Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_MALLOC_GUARD_EDGES property on all targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_MALLOC_SCRIBBLE
       New in version 3.13.

       Whether  to  enable  Malloc  Scribble  in  the  Diagnostics section of the generated Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_MALLOC_SCRIBBLE property on all targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_MALLOC_STACK
       New in version 3.13.

       Whether to enable Malloc Stack in the Diagnostics section of the generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_MALLOC_STACK property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_THREAD_SANITIZER
       New in version 3.13.

       Whether to enable Thread Sanitizer in the  Diagnostics  section  of  the  generated  Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_THREAD_SANITIZER property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_THREAD_SANITIZER_STOP
       New in version 3.13.

       Whether to enable Thread Sanitizer - Pause on issues in the  Diagnostics  section  of  the
       generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_THREAD_SANITIZER_STOP property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_UNDEFINED_BEHAVIOUR_SANITIZER
       New in version 3.13.

       Whether to enable Undefined Behavior Sanitizer in the Diagnostics section of the generated
       Xcode scheme.

       This  variable  initializes the XCODE_SCHEME_UNDEFINED_BEHAVIOUR_SANITIZER property on all
       targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_UNDEFINED_BEHAVIOUR_SANITIZER_STOP
       New in version 3.13.

       Whether  to  enable Undefined Behavior Sanitizer option Pause on issues in the Diagnostics
       section of the generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_UNDEFINED_BEHAVIOUR_SANITIZER_STOP property  on
       all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_WORKING_DIRECTORY
       New in version 3.17.

       Specify the Working Directory of the Run  and  Profile  actions  in  the  generated  Xcode
       scheme.

       This variable initializes the XCODE_SCHEME_WORKING_DIRECTORY property on all targets.

       Please  refer  to the XCODE_GENERATE_SCHEME target property documentation to see all Xcode
       schema related properties.

   CMAKE_XCODE_SCHEME_ZOMBIE_OBJECTS
       New in version 3.13.

       Whether to enable Zombie Objects in the Diagnostics section of the generated Xcode scheme.

       This variable initializes the XCODE_SCHEME_ZOMBIE_OBJECTS property on all targets.

       Please refer to the XCODE_GENERATE_SCHEME target property documentation to see  all  Xcode
       schema related properties.

   CMAKE_XCODE_XCCONFIG
       New in version 3.24.

       If  set,  the  Xcode generator will register the specified file as a global XCConfig file.
       For target-level XCConfig files see the XCODE_XCCONFIG target property.

       This feature is intended to ease migration from native Xcode projects to CMake projects.

       Contents of CMAKE_XCODE_XCCONFIG may use generator expressions.

   <PackageName>_ROOT
       New in version 3.12.

       Calls  to  find_package(<PackageName>)  will  search  in   prefixes   specified   by   the
       <PackageName>_ROOT  CMake variable, where <PackageName> is the (case-preserved) name given
       to the find_package() call and _ROOT is  literal.   For  example,  find_package(Foo)  will
       search prefixes specified in the Foo_ROOT CMake variable (if set).  See policy CMP0074.

       This variable may hold a single prefix or a semicolon-separated list of multiple prefixes.

       See also the <PackageName>_ROOT environment variable.

       <PACKAGENAME>_ROOT
              New in version 3.27.

              Calls  to find_package(<PackageName>) will also search in prefixes specified by the
              upper-case <PACKAGENAME>_ROOT CMake variable.  See policy CMP0144.

VARIABLES THAT DESCRIBE THE SYSTEM

   ANDROID
       New in version 3.7.

       Set to 1 when the target system (CMAKE_SYSTEM_NAME) is Android.

   APPLE
       Set to True when the target system is an Apple platform (macOS, iOS, tvOS or watchOS).

   BORLAND
       True if the Borland compiler is being used.

       This is set to true if the Borland compiler is being used.

   BSD
       New in version 3.25.

       Set to a string value when the target system  is  BSD.  This  value  can  be  one  of  the
       following: DragonFlyBSD, FreeBSD, OpenBSD, or NetBSD.

   CMAKE_ANDROID_NDK_VERSION
       New in version 3.20.

       When  Cross  Compiling  for  Android  with  the NDK and using an Android NDK version 11 or
       higher, this variable is provided by CMake to report the NDK version number.

   CMAKE_CL_64
       Discouraged.  Use CMAKE_SIZEOF_VOID_P instead.

       Set to a true value when using a Microsoft Visual Studio cl compiler that targets a 64-bit
       architecture.

   CMAKE_COMPILER_2005
       Using the Visual Studio 2005 compiler from Microsoft

       Set to true when using the Visual Studio 2005 compiler from Microsoft.

   CMAKE_HOST_APPLE
       True for Apple macOS operating systems.

       Set to true when the host system is Apple macOS.

   CMAKE_HOST_BSD
       New in version 3.25.

       Set to a string value when the host system is BSD. This value can be one of the following:
       DragonFlyBSD, FreeBSD, OpenBSD, or NetBSD.

   CMAKE_HOST_LINUX
       New in version 3.25.

       Set to true when the host system is Linux.

   CMAKE_HOST_SOLARIS
       New in version 3.6.

       True for Oracle Solaris operating systems.

       Set to true when the host system is Oracle Solaris.

   CMAKE_HOST_SYSTEM
       Composite Name of OS CMake is being run on.

       This variable is the composite of  CMAKE_HOST_SYSTEM_NAME  and  CMAKE_HOST_SYSTEM_VERSION,
       e.g.               ${CMAKE_HOST_SYSTEM_NAME}-${CMAKE_HOST_SYSTEM_VERSION}.              If
       CMAKE_HOST_SYSTEM_VERSION  is   not   set,   then   this   variable   is   the   same   as
       CMAKE_HOST_SYSTEM_NAME.

   CMAKE_HOST_SYSTEM_NAME
       Name of the OS CMake is running on.

       On  systems  that  have the uname command, this variable is set to the output of uname -s.
       Linux, Windows, and Darwin for macOS are the values  found  on  the  big  three  operating
       systems.

   CMAKE_HOST_SYSTEM_PROCESSOR
       The name of the CPU CMake is running on.

   Windows Platforms
       On   Windows,   this   variable   is   set  to  the  value  of  the  environment  variable
       PROCESSOR_ARCHITECTURE.

   Unix Platforms
       On systems that support uname, this variable is set to the output of:

       • uname -m on GNU, Linux, Cygwin, Android, or

       • arch on OpenBSD, or

       • on other systems,

         • uname -p if its exit code is nonzero, or

         • uname -m otherwise.

   macOS Platforms
       The value of uname -m is used by default.

       On Apple Silicon hosts, the architecture printed by uname -m may vary based on CMake's own
       architecture and that of the invoking process tree.

       New in version 3.19.2: On Apple Silicon hosts:

       • The   CMAKE_APPLE_SILICON_PROCESSOR   variable   or   the  CMAKE_APPLE_SILICON_PROCESSOR
         environment variable may be set to specify the host architecture explicitly.

       • If CMAKE_OSX_ARCHITECTURES is not set, CMake adds explicit flags to tell the compiler to
         build  for  the  host  architecture so the toolchain does not have to guess based on the
         process tree's architecture.

   CMAKE_HOST_SYSTEM_VERSION
       The OS version CMake is running on.

       A numeric version string for the system.  On systems that support uname, this variable  is
       set  to  the  output  of  uname  -r.  On  other systems this is set to major-minor version
       numbers.

   CMAKE_HOST_UNIX
       True for UNIX and UNIX like operating systems.

       Set to true when the host system is UNIX or UNIX like (i.e.  APPLE and CYGWIN).

   CMAKE_HOST_WIN32
       True if the host system is running Windows, including Windows 64-bit and MSYS.

       Set to false on Cygwin.

   CMAKE_LIBRARY_ARCHITECTURE
       Target architecture library directory name, if detected.

       This is the value of CMAKE_<LANG>_LIBRARY_ARCHITECTURE as detected for one of the  enabled
       languages.

   CMAKE_LIBRARY_ARCHITECTURE_REGEX
       Regex matching possible target architecture library directory names.

       This  is  used to detect CMAKE_<LANG>_LIBRARY_ARCHITECTURE from the implicit linker search
       path by matching the <arch> name.

   CMAKE_OBJECT_PATH_MAX
       Maximum object file full-path length allowed by native build tools.

       CMake computes for every source file an object file name that is unique to the source file
       and  deterministic with respect to the full path to the source file.  This allows multiple
       source files in a target to share the same name  if  they  lie  in  different  directories
       without  rebuilding when one is added or removed.  However, it can produce long full paths
       in a few cases, so CMake shortens the path using a hashing scheme when the full path to an
       object  file  exceeds  a  limit.   CMake  has  a  built-in limit for each platform that is
       sufficient for common tools, but some native tools may have a lower limit.  This  variable
       may  be  set  to  specify the limit explicitly.  The value must be an integer no less than
       128.

   CMAKE_SYSTEM
       Composite name of operating system CMake is compiling for.

       This variable  is  the  composite  of  CMAKE_SYSTEM_NAME  and  CMAKE_SYSTEM_VERSION,  e.g.
       ${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}.   If  CMAKE_SYSTEM_VERSION  is not set, then
       this variable is the same as CMAKE_SYSTEM_NAME.

   CMAKE_SYSTEM_NAME
       The  name  of  the  operating  system  for   which   CMake   is   to   build.    See   the
       CMAKE_SYSTEM_VERSION variable for the OS version.

       Note that CMAKE_SYSTEM_NAME is not set to anything by default when running in script mode,
       since it's not building anything.

   System Name for Host Builds
       CMAKE_SYSTEM_NAME is by default set  to  the  same  value  as  the  CMAKE_HOST_SYSTEM_NAME
       variable so that the build targets the host system.

   System Name for Cross Compiling
       CMAKE_SYSTEM_NAME  may  be set explicitly when first configuring a new build tree in order
       to enable cross compiling.  In this case the CMAKE_SYSTEM_VERSION variable  must  also  be
       set explicitly.

   CMAKE_SYSTEM_PROCESSOR
       When    not    cross-compiling,    this    variable    has   the   same   value   as   the
       CMAKE_HOST_SYSTEM_PROCESSOR variable.  In many cases, this will correspond to  the  target
       architecture for the build, but this is not guaranteed.  (E.g. on Windows, the host may be
       AMD64 even when using a MSVC cl compiler with a 32-bit target.)

       When  cross-compiling,  a  CMAKE_TOOLCHAIN_FILE  should  set  the   CMAKE_SYSTEM_PROCESSOR
       variable  to  match  target  architecture that it specifies (via CMAKE_<LANG>_COMPILER and
       perhaps CMAKE_<LANG>_COMPILER_TARGET).

   CMAKE_SYSTEM_VERSION
       The  version  of  the  operating  system  for  which  CMake  is   to   build.    See   the
       CMAKE_SYSTEM_NAME variable for the OS name.

   System Version for Host Builds
       When  the  CMAKE_SYSTEM_NAME variable takes its default value then CMAKE_SYSTEM_VERSION is
       by default set to the same value as the CMAKE_HOST_SYSTEM_VERSION  variable  so  that  the
       build targets the host system version.

       In  the  case  of  a host build then CMAKE_SYSTEM_VERSION may be set explicitly when first
       configuring a new build tree in order to  enable  targeting  the  build  for  a  different
       version  of  the  host  operating  system  than  is actually running on the host.  This is
       allowed and not considered cross compiling so long as the binaries built for the specified
       OS version can still run on the host.

   System Version for Cross Compiling
       When  the  CMAKE_SYSTEM_NAME variable is set explicitly to enable cross compiling then the
       value of CMAKE_SYSTEM_VERSION must also be set explicitly to  specify  the  target  system
       version.

   CYGWIN
       True for Cygwin.

       Set to true when using Cygwin.

   GHSMULTI
       New in version 3.3.

       1 when using Green Hills MULTI generator.

       Also,   Set   to  1  when  the  target  system  is  a  Green  Hills  platform  (i.e.  When
       CMAKE_SYSTEM_NAME is GHS-MULTI).

   IOS
       New in version 3.14.

       Set to 1 when the target system (CMAKE_SYSTEM_NAME) is iOS.

   LINUX
       New in version 3.25.

       Set to true when the target system is Linux.

   MINGW
       New in version 3.2.

       Set to a true value when at least one language is enabled with a  compiler  targeting  the
       GNU ABI on Windows (MinGW).

       Otherwise, this variable is not set by CMake.

   MSVC
       Set  to true when the compiler is some version of Microsoft Visual C++ or another compiler
       simulating the Visual C++ cl command-line syntax.

       See also the MSVC_VERSION variable.

   MSVC10
       Discouraged.  Use the MSVC_VERSION variable instead.

       True when using the Microsoft Visual Studio  v100  toolset  (cl  version  16)  or  another
       compiler that simulates it.

   MSVC11
       Discouraged.  Use the MSVC_VERSION variable instead.

       True  when  using  the  Microsoft  Visual  Studio  v110 toolset (cl version 17) or another
       compiler that simulates it.

   MSVC12
       Discouraged.  Use the MSVC_VERSION variable instead.

       True when using the Microsoft Visual Studio  v120  toolset  (cl  version  18)  or  another
       compiler that simulates it.

   MSVC14
       New in version 3.1.

       Discouraged.  Use the MSVC_VERSION variable instead.

       True  when  using  the  Microsoft  Visual  Studio  v140 or v141 toolset (cl version 19) or
       another compiler that simulates it.

   MSVC60
       Discouraged.  Use the MSVC_VERSION variable instead.

       True when using Microsoft Visual C++ 6.0.

       Set to true when the compiler is version 6.0 of Microsoft Visual C++.

   MSVC70
       Discouraged.  Use the MSVC_VERSION variable instead.

       True when using Microsoft Visual C++ 7.0.

       Set to true when the compiler is version 7.0 of Microsoft Visual C++.

   MSVC71
       Discouraged.  Use the MSVC_VERSION variable instead.

       True when using Microsoft Visual C++ 7.1.

       Set to true when the compiler is version 7.1 of Microsoft Visual C++.

   MSVC80
       Discouraged.  Use the MSVC_VERSION variable instead.

       True when using the Microsoft Visual  Studio  v80  toolset  (cl  version  14)  or  another
       compiler that simulates it.

   MSVC90
       Discouraged.  Use the MSVC_VERSION variable instead.

       True  when  using  the  Microsoft  Visual  Studio  v90  toolset (cl version 15) or another
       compiler that simulates it.

   MSVC_IDE
       True when using the Microsoft Visual C++ IDE.

       Set to true when the target platform is the Microsoft Visual C++ IDE, as  opposed  to  the
       command line compiler.

       NOTE:
          This  variable  is only available after compiler detection has been performed, so it is
          not available to toolchain files or before the  first  project()  or  enable_language()
          call which uses an MSVC-like compiler.

   MSVC_TOOLSET_VERSION
       New in version 3.12.

       The  toolset  version  of Microsoft Visual C/C++ being used if any.  If MSVC-like is being
       used, this variable is set  based  on  the  version  of  the  compiler  as  given  by  the
       MSVC_VERSION variable.

       Known toolset version numbers are:

          80        = VS 2005 (8.0)
          90        = VS 2008 (9.0)
          100       = VS 2010 (10.0)
          110       = VS 2012 (11.0)
          120       = VS 2013 (12.0)
          140       = VS 2015 (14.0)
          141       = VS 2017 (15.0)
          142       = VS 2019 (16.0)
          143       = VS 2022 (17.0)

       Compiler  versions  newer  than  those known to CMake will be reported as the latest known
       toolset version.

       See also the MSVC_VERSION variable.

   MSVC_VERSION
       The version of Microsoft Visual C/C++ being used if any.  If a compiler simulating  Visual
       C++  is  being used, this variable is set to the toolset version simulated as given by the
       _MSC_VER preprocessor definition.

       Known version numbers are:

          1200      = VS  6.0
          1300      = VS  7.0
          1310      = VS  7.1
          1400      = VS  8.0 (v80 toolset)
          1500      = VS  9.0 (v90 toolset)
          1600      = VS 10.0 (v100 toolset)
          1700      = VS 11.0 (v110 toolset)
          1800      = VS 12.0 (v120 toolset)
          1900      = VS 14.0 (v140 toolset)
          1910-1919 = VS 15.0 (v141 toolset)
          1920-1929 = VS 16.0 (v142 toolset)
          1930-1939 = VS 17.0 (v143 toolset)

       See also the  CMAKE_<LANG>_COMPILER_VERSION and MSVC_TOOLSET_VERSION variable.

   MSYS
       New in version 3.14.

       True when using the MSYS Makefiles generator.

   UNIX
       Set to True when the target system is UNIX or UNIX-like  (e.g.  APPLE  and  CYGWIN).   The
       CMAKE_SYSTEM_NAME  variable  should  be  queried  if  a more specific understanding of the
       target system is required.

   WIN32
       Set to True when the target system is Windows, including Win64.

   WINCE
       New in version 3.1.

       True when the CMAKE_SYSTEM_NAME variable is set to WindowsCE.

   WINDOWS_PHONE
       New in version 3.1.

       True when the CMAKE_SYSTEM_NAME variable is set to WindowsPhone.

   WINDOWS_STORE
       New in version 3.1.

       True when the CMAKE_SYSTEM_NAME variable is set to WindowsStore.

   XCODE
       New in version 3.7.

       True when using Xcode generator.

   XCODE_VERSION
       Version of Xcode (Xcode generator only).

       Under  the  Xcode  generator,  this  is   the   version   of   Xcode   as   specified   in
       Xcode.app/Contents/version.plist (such as 3.1.2).

VARIABLES THAT CONTROL THE BUILD

   CMAKE_ADSP_ROOT
       New in version 3.24.

       When Cross Compiling for ADSP SHARC/Blackfin, this variable holds the absolute path to the
       latest CCES or VDSP++ install.  The directory is expected to  contain  the  cc21k.exe  and
       ccblkfn.exe  compilers.   This  will  be set automatically if a default install of CCES or
       VDSP++ can be found.

       See also the ADSP_ROOT environment variable.

   CMAKE_AIX_EXPORT_ALL_SYMBOLS
       New in version 3.17.

       Default value for AIX_EXPORT_ALL_SYMBOLS  target  property.   This  variable  is  used  to
       initialize the property on each target as it is created.

   CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS
       New in version 3.4.

       Default  value  for  the  ANDROID_ANT_ADDITIONAL_OPTIONS target property.  See that target
       property for additional information.

   CMAKE_ANDROID_API
       New in version 3.1.

       When Cross Compiling for Android with NVIDIA Nsight  Tegra  Visual  Studio  Edition,  this
       variable may be set to specify the default value for the ANDROID_API target property.  See
       that target property for additional information.

       When Cross Compiling for Android, the CMAKE_SYSTEM_VERSION variable represents the Android
       API   version  number  targeted.   For  historical  reasons,  if  a  toolchain  file  sets
       CMAKE_ANDROID_API, but not CMAKE_SYSTEM_VERSION, the latter will be initialized using  the
       former.

   CMAKE_ANDROID_API_MIN
       New in version 3.2.

       Default  value  for  the  ANDROID_API_MIN  target  property.  See that target property for
       additional information.

   CMAKE_ANDROID_ARCH
       New in version 3.4.

       When Cross Compiling for Android with NVIDIA Nsight  Tegra  Visual  Studio  Edition,  this
       variable  may  be  set  to specify the default value for the ANDROID_ARCH target property.
       See that target property for additional information.

       Otherwise, when Cross Compiling for Android,  this  variable  provides  the  name  of  the
       Android  architecture  corresponding  to the value of the CMAKE_ANDROID_ARCH_ABI variable.
       The architecture name may be one of:

       • armarm64mipsmips64x86x86_64

   CMAKE_ANDROID_ARCH_ABI
       New in version 3.7.

       When Cross Compiling for Android, this variable specifies the target architecture and  ABI
       to be used.  Valid values are:

       • arm64-v8aarmeabi-v7aarmeabi-v6armeabimipsmips64x86x86_64

       See also the CMAKE_ANDROID_ARM_MODE and CMAKE_ANDROID_ARM_NEON variables.

   CMAKE_ANDROID_ARM_MODE
       New in version 3.7.

       When  Cross  Compiling for Android and CMAKE_ANDROID_ARCH_ABI is set to one of the armeabi
       architectures, set CMAKE_ANDROID_ARM_MODE to ON to target 32-bit ARM  processors  (-marm).
       Otherwise, the default is to target the 16-bit Thumb processors (-mthumb).

   CMAKE_ANDROID_ARM_NEON
       New in version 3.7.

       When  Cross  Compiling  for  Android  and CMAKE_ANDROID_ARCH_ABI is set to armeabi-v7a set
       CMAKE_ANDROID_ARM_NEON to ON to target ARM NEON devices.

   CMAKE_ANDROID_ASSETS_DIRECTORIES
       New in version 3.4.

       Default value  for  the  ANDROID_ASSETS_DIRECTORIES  target  property.   See  that  target
       property for additional information.

   CMAKE_ANDROID_EXCEPTIONS
       New in version 3.20.

       When Cross Compiling for Android with the NDK, this variable may be set to specify whether
       exceptions are enabled.

   CMAKE_ANDROID_GUI
       New in version 3.1.

       Default value for the  ANDROID_GUI  target  property  of  executables.   See  that  target
       property for additional information.

   CMAKE_ANDROID_JAR_DEPENDENCIES
       New in version 3.4.

       Default  value for the ANDROID_JAR_DEPENDENCIES target property.  See that target property
       for additional information.

   CMAKE_ANDROID_JAR_DIRECTORIES
       New in version 3.4.

       Default value for the ANDROID_JAR_DIRECTORIES target property.  See that  target  property
       for additional information.

   CMAKE_ANDROID_JAVA_SOURCE_DIR
       New in version 3.4.

       Default  value  for the ANDROID_JAVA_SOURCE_DIR target property.  See that target property
       for additional information.

   CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES
       New in version 3.4.

       Default value for the ANDROID_NATIVE_LIB_DEPENDENCIES target property.   See  that  target
       property for additional information.

   CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES
       New in version 3.4.

       Default  value  for  the  ANDROID_NATIVE_LIB_DIRECTORIES target property.  See that target
       property for additional information.

   CMAKE_ANDROID_NDK
       New in version 3.7.

       When Cross Compiling for Android with the NDK, this variable holds the  absolute  path  to
       the  root  directory  of  the  NDK.   The  directory must contain a platforms subdirectory
       holding the android-<api> directories.

   CMAKE_ANDROID_NDK_DEPRECATED_HEADERS
       New in version 3.9.

       When Cross Compiling for Android with the NDK, this variable may be set to specify whether
       to use the deprecated per-api-level headers instead of the unified headers.

       If  not  specified,  the  default  will  be false if using a NDK version that provides the
       unified headers and true otherwise.

   CMAKE_ANDROID_NDK_TOOLCHAIN_HOST_TAG
       New in version 3.7.1.

       When Cross Compiling for Android with the NDK, this variable provides the NDK's "host tag"
       used to construct the path to prebuilt toolchains that run on the host.

   CMAKE_ANDROID_NDK_TOOLCHAIN_VERSION
       New in version 3.7.

       When  Cross  Compiling  for  Android with the NDK, this variable may be set to specify the
       version of the toolchain to be used as the compiler.

       On NDK r19 or above, this variable must be unset or set to clang.

       On NDK r18 or below, this variable must be set to one of these forms:

       • <major>.<minor>: GCC of specified version

       • clang<major>.<minor>: Clang of specified version

       • clang: Clang of most recent available version

       A toolchain of the requested version will be selected automatically to match the ABI named
       in the CMAKE_ANDROID_ARCH_ABI variable.

       If  not  specified,  the  default  will  be  a value that selects the latest available GCC
       toolchain.

   CMAKE_ANDROID_PROCESS_MAX
       New in version 3.4.

       Default value for the ANDROID_PROCESS_MAX target property.  See that target  property  for
       additional information.

   CMAKE_ANDROID_PROGUARD
       New in version 3.4.

       Default  value  for  the  ANDROID_PROGUARD  target property.  See that target property for
       additional information.

   CMAKE_ANDROID_PROGUARD_CONFIG_PATH
       New in version 3.4.

       Default value for the  ANDROID_PROGUARD_CONFIG_PATH  target  property.   See  that  target
       property for additional information.

   CMAKE_ANDROID_RTTI
       New in version 3.20.

       When Cross Compiling for Android with the NDK, this variable may be set to specify whether
       RTTI is enabled.

   CMAKE_ANDROID_SECURE_PROPS_PATH
       New in version 3.4.

       Default value for the ANDROID_SECURE_PROPS_PATH target property.  See that target property
       for additional information.

   CMAKE_ANDROID_SKIP_ANT_STEP
       New in version 3.4.

       Default value for the ANDROID_SKIP_ANT_STEP target property.  See that target property for
       additional information.

   CMAKE_ANDROID_STANDALONE_TOOLCHAIN
       New in version 3.7.

       When Cross Compiling for Android with a Standalone  Toolchain,  this  variable  holds  the
       absolute  path  to  the  root  directory  of  the toolchain.  The specified directory must
       contain a sysroot subdirectory.

   CMAKE_ANDROID_STL_TYPE
       New in version 3.4.

       When Cross Compiling for Android with NVIDIA Nsight  Tegra  Visual  Studio  Edition,  this
       variable may be set to specify the default value for the ANDROID_STL_TYPE target property.
       See that target property for additional information.

       When Cross Compiling for Android with the NDK, this variable may be set to specify the STL
       variant to be used.  The value may be one of:

       none   No C++ Support

       system Minimal C++ without STL

       gabi++_static
              GAbi++ Static

       gabi++_shared
              GAbi++ Shared

       gnustl_static
              GNU libstdc++ Static

       gnustl_shared
              GNU libstdc++ Shared

       c++_static
              LLVM libc++ Static

       c++_shared
              LLVM libc++ Shared

       stlport_static
              STLport Static

       stlport_shared
              STLport Shared

       The  default  value  is  gnustl_static  on  NDK  versions  that  provide  it and otherwise
       c++_static.  Note that this default differs from the native NDK build system because CMake
       may be used to build projects for Android that are not natively implemented for it and use
       the C++ standard library.

   CMAKE_APPLE_SILICON_PROCESSOR
       New in version 3.19.2.

       On Apple Silicon hosts running macOS, set this variable to tell CMake what architecture to
       use for CMAKE_HOST_SYSTEM_PROCESSOR.  The value must be either arm64 or x86_64.

       The  value  of  this variable should never be modified by project code.  It is meant to be
       set as a cache entry provided by the user, e.g. via -DCMAKE_APPLE_SILICON_PROCESSOR=....

       See also the CMAKE_APPLE_SILICON_PROCESSOR environment variable.

   CMAKE_ARCHIVE_OUTPUT_DIRECTORY
       Where to put all the ARCHIVE target files when built.

       This variable is used to initialize  the  ARCHIVE_OUTPUT_DIRECTORY  property  on  all  the
       targets.  See that target property for additional information.

   CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
       New in version 3.3.

       Where to put all the ARCHIVE target files when built for a specific configuration.

       This  variable is used to initialize the ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> property on all
       the targets.  See that target property for additional information.

   CMAKE_AUTOGEN_ORIGIN_DEPENDS
       New in version 3.14.

       Switch for forwarding origin target dependencies to the corresponding _autogen targets.

       This variable is used  to  initialize  the  AUTOGEN_ORIGIN_DEPENDS  property  on  all  the
       targets.  See that target property for additional information.

       By default CMAKE_AUTOGEN_ORIGIN_DEPENDS is ON.

   CMAKE_AUTOGEN_PARALLEL
       New in version 3.11.

       Number of parallel moc or uic processes to start when using AUTOMOC and AUTOUIC.

       This variable is used to initialize the AUTOGEN_PARALLEL property on all the targets.  See
       that target property for additional information.

       By default CMAKE_AUTOGEN_PARALLEL is unset.

   CMAKE_AUTOGEN_USE_SYSTEM_INCLUDE
       New in version 3.27.

       This variable is used to initialize the AUTOGEN_USE_SYSTEM_INCLUDE property on all targets
       as they are created.  See that target property for additional information.

       By default CMAKE_AUTOGEN_USE_SYSTEM_INCLUDE is unset.

   CMAKE_AUTOGEN_VERBOSE
       New in version 3.13.

       Sets  the  verbosity  of AUTOMOC, AUTOUIC and AUTORCC.  A positive integer value or a true
       boolean value lets the AUTO* generators output additional processing information.

       Setting CMAKE_AUTOGEN_VERBOSE has the same  effect  as  setting  the  VERBOSE  environment
       variable  during  generation  (e.g.  by  calling  make VERBOSE=1).  The extra verbosity is
       limited to the AUTO* generators though.

       By default CMAKE_AUTOGEN_VERBOSE is unset.

   CMAKE_AUTOMOC
       Whether to handle moc automatically for Qt targets.

       This variable is used to initialize the AUTOMOC property on all  the  targets.   See  that
       target property for additional information.

   CMAKE_AUTOMOC_COMPILER_PREDEFINES
       New in version 3.10.

       This  variable  is  used to initialize the AUTOMOC_COMPILER_PREDEFINES property on all the
       targets. See that target property for additional information.

       By default it is ON.

   CMAKE_AUTOMOC_DEPEND_FILTERS
       New in version 3.9.

       Filter definitions used by CMAKE_AUTOMOC  to  extract  file  names  from  source  code  as
       additional dependencies for the moc file.

       This  variable  is  used  to  initialize  the  AUTOMOC_DEPEND_FILTERS  property on all the
       targets. See that target property for additional information.

       By default it is empty.

   CMAKE_AUTOMOC_MACRO_NAMES
       New in version 3.10.

       Semicolon-separated list list of macro names used by CMAKE_AUTOMOC to determine if  a  C++
       file needs to be processed by moc.

       This  variable  is used to initialize the AUTOMOC_MACRO_NAMES property on all the targets.
       See that target property for additional information.

       The default value is Q_OBJECT;Q_GADGET;Q_NAMESPACE;Q_NAMESPACE_EXPORT.

   Example
       Let CMake know that source files that contain CUSTOM_MACRO must be moc processed as well:

          set(CMAKE_AUTOMOC ON)
          list(APPEND CMAKE_AUTOMOC_MACRO_NAMES "CUSTOM_MACRO")

   CMAKE_AUTOMOC_MOC_OPTIONS
       Additional options for moc when using CMAKE_AUTOMOC.

       This variable is used to initialize the AUTOMOC_MOC_OPTIONS property on all  the  targets.
       See that target property for additional information.

   CMAKE_AUTOMOC_PATH_PREFIX
       New in version 3.16.

       Whether to generate the -p path prefix option for moc on AUTOMOC enabled Qt targets.

       This  variable  is used to initialize the AUTOMOC_PATH_PREFIX property on all the targets.
       See that target property for additional information.

       The default value is OFF.

   CMAKE_AUTOMOC_EXECUTABLE
       New in version 3.27.

       This variable is used to initialize the AUTOMOC_EXECUTABLE property on  all  the  targets.
       See that target property for additional information.

       By default it is empty.

   CMAKE_AUTORCC
       Whether to handle rcc automatically for Qt targets.

       This  variable  is  used  to initialize the AUTORCC property on all the targets.  See that
       target property for additional information.

   CMAKE_AUTORCC_OPTIONS
       Additional options for rcc when using CMAKE_AUTORCC.

       This variable is used to initialize the AUTORCC_OPTIONS property on all the targets.   See
       that target property for additional information.

   EXAMPLE
          # ...
          set(CMAKE_AUTORCC_OPTIONS "--compress;9")
          # ...

   CMAKE_AUTORCC_EXECUTABLE
       New in version 3.27.

       This  variable  is  used to initialize the AUTORCC_EXECUTABLE property on all the targets.
       See that target property for additional information.

       By default it is empty.

   CMAKE_AUTOUIC
       Whether to handle uic automatically for Qt targets.

       This variable is used to initialize the AUTOUIC property on all  the  targets.   See  that
       target property for additional information.

   CMAKE_AUTOUIC_OPTIONS
       Additional options for uic when using CMAKE_AUTOUIC.

       This  variable is used to initialize the AUTOUIC_OPTIONS property on all the targets.  See
       that target property for additional information.

   EXAMPLE
          # ...
          set_property(CMAKE_AUTOUIC_OPTIONS "--no-protection")
          # ...

   CMAKE_AUTOUIC_SEARCH_PATHS
       New in version 3.9.

       Search path list used by CMAKE_AUTOUIC to find included .ui files.

       This variable is used to initialize the AUTOUIC_SEARCH_PATHS property on all the  targets.
       See that target property for additional information.

       By default it is empty.

   CMAKE_AUTOUIC_EXECUTABLE
       New in version 3.27.

       This  variable  is  used to initialize the AUTOUIC_EXECUTABLE property on all the targets.
       See that target property for additional information.

       By default it is empty.

   CMAKE_BUILD_RPATH
       New in version 3.8.

       Semicolon-separated list specifying runtime path (RPATH) entries to add to binaries linked
       in  the  build  tree  (for  platforms  that support it).  The entries will not be used for
       binaries in the install tree.  See also the CMAKE_INSTALL_RPATH variable.

       This is used to initialize the BUILD_RPATH target property for all targets.

   CMAKE_BUILD_RPATH_USE_ORIGIN
       New in version 3.14.

       Whether to use relative paths for the build RPATH.

       This is used to initialize the BUILD_RPATH_USE_ORIGIN target property for all targets, see
       that property for more details.

   CMAKE_BUILD_WITH_INSTALL_NAME_DIR
       New in version 3.9.

       Whether to use INSTALL_NAME_DIR on targets in the build tree.

       This  variable  is  used  to  initialize  the  BUILD_WITH_INSTALL_NAME_DIR property on all
       targets.

   CMAKE_BUILD_WITH_INSTALL_RPATH
       Use the install path for the RPATH.

       Normally CMake uses the build tree for the RPATH when building executables etc on  systems
       that  use RPATH.  When the software is installed the executables etc are relinked by CMake
       to have the install RPATH.  If this variable is set to true then the  software  is  always
       built with the install path for the RPATH and does not need to be relinked when installed.

       This is used to initialize the BUILD_WITH_INSTALL_RPATH target property for all targets.

   CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY
       New in version 3.1.

       Output  directory  for MS debug symbol .pdb files generated by the compiler while building
       source files.

       This variable is used to initialize the COMPILE_PDB_OUTPUT_DIRECTORY property on  all  the
       targets.

   CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_<CONFIG>
       New in version 3.1.

       Per-configuration  output  directory  for  MS  debug  symbol  .pdb  files generated by the
       compiler while building source files.

       This is a per-configuration version of CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY.  This  variable
       is  used  to  initialize  the  COMPILE_PDB_OUTPUT_DIRECTORY_<CONFIG>  property  on all the
       targets.

   CMAKE_COMPILE_WARNING_AS_ERROR
       New in version 3.24.

       Specify whether to treat warnings on compile as errors.

       This variable is used to initialize  the  COMPILE_WARNING_AS_ERROR  property  on  all  the
       targets.

   CMAKE_<CONFIG>_POSTFIX
       Default filename postfix for libraries under configuration <CONFIG>.

       When   a  non-executable  target  is  created  its  <CONFIG>_POSTFIX  target  property  is
       initialized with the value of this variable if it is set.

   CMAKE_CROSS_CONFIGS
       New in version 3.17.

       Specifies   a   semicolon-separated   list   of   configurations   available   from    all
       build-<Config>.ninja  files  in the Ninja Multi-Config generator.  This variable activates
       cross-config mode. Targets from each config specified in this variable can be  built  from
       any  build-<Config>.ninja  file.  Custom  commands  will  use  the configuration native to
       build-<Config>.ninja.   If   it   is    set    to    all,    all    configurations    from
       CMAKE_CONFIGURATION_TYPES  are  cross-configs.  If  it  is  not  specified, or empty, each
       build-<Config>.ninja file will only contain build rules for its own configuration.

       The value of this variable must be a subset of CMAKE_CONFIGURATION_TYPES.

   CMAKE_CTEST_ARGUMENTS
       New in version 3.17.

       Set this to a semicolon-separated list of command-line arguments to pass to ctest(1)  when
       running tests through the test (or RUN_TESTS) target of the generated build system.

   CMAKE_CUDA_RESOLVE_DEVICE_SYMBOLS
       New in version 3.16.

       Default  value  for  CUDA_RESOLVE_DEVICE_SYMBOLS  target property when defined. By default
       this variable is not defined.

       This variable is used to initialize the property on each target as it is created.

   CMAKE_CUDA_RUNTIME_LIBRARY
       New in version 3.17.

       Select the CUDA runtime library for use when compiling and linking CUDA.  This variable is
       used to initialize the CUDA_RUNTIME_LIBRARY property on all targets as they are created.

       The allowed case insensitive values are:

       None   Link with -cudart=none or equivalent flag(s) to use no CUDA runtime library.

       Shared Link  with  -cudart=shared  or  equivalent flag(s) to use a dynamically-linked CUDA
              runtime library.

       Static Link with -cudart=static or equivalent flag(s)  to  use  a  statically-linked  CUDA
              runtime library.

       Contents of CMAKE_CUDA_RUNTIME_LIBRARY may use generator expressions.

       If  this variable is not set then the CUDA_RUNTIME_LIBRARY target property will not be set
       automatically.  If that property is not set then CMake uses an appropriate  default  value
       based on the compiler to select the CUDA runtime library.

       NOTE:
          This  property  has  effect only when the CUDA language is enabled. To control the CUDA
          runtime linking when only using the CUDA SDK with the C or C++  language  we  recommend
          using the FindCUDAToolkit module.

   CMAKE_CUDA_SEPARABLE_COMPILATION
       New in version 3.11.

       Default  value  for  CUDA_SEPARABLE_COMPILATION target property.  This variable is used to
       initialize the property on each target as it is created.

   CMAKE_CXX_SCAN_FOR_MODULES
       New in version 3.26.

       Whether to scan C++ source files for module dependencies.

       This variable is used to initialize the CXX_SCAN_FOR_MODULES property on all the  targets.
       See that target property for additional information.

       NOTE:
          This  setting  is  meaningful  only  when experimental support for C++ modules has been
          enabled by the CMAKE_EXPERIMENTAL_CXX_MODULE_CMAKE_API gate.

   CMAKE_DEBUG_POSTFIX
       See variable CMAKE_<CONFIG>_POSTFIX.

       This variable is a special case of the more-general  CMAKE_<CONFIG>_POSTFIX  variable  for
       the DEBUG configuration.

   CMAKE_DEFAULT_BUILD_TYPE
       New in version 3.17.

       Specifies  the  configuration  to  use  by  default  in  a  build.ninja  file in the Ninja
       Multi-Config generator. If this variable is specified, build.ninja uses build  rules  from
       build-<Config>.ninja by default. All custom commands are executed with this configuration.
       If the variable is not specified, the first item from  CMAKE_CONFIGURATION_TYPES  is  used
       instead.

       The value of this variable must be one of the items from CMAKE_CONFIGURATION_TYPES.

   CMAKE_DEFAULT_CONFIGS
       New in version 3.17.

       Specifies  a  semicolon-separated  list  of  configurations  to  build  for  a  target  in
       build.ninja if no :<Config> suffix is specified in the Ninja Multi-Config generator. If it
       is  set  to  all,  all  configurations  from  CMAKE_CROSS_CONFIGS  are  used. If it is not
       specified, it defaults to CMAKE_DEFAULT_BUILD_TYPE.

       For example, if you set CMAKE_DEFAULT_BUILD_TYPE to Release, but set CMAKE_DEFAULT_CONFIGS
       to  Debug  or  all,  all <target> aliases in build.ninja will resolve to <target>:Debug or
       <target>:all, but custom commands will still use the Release configuration.

       The value of this variable must be a subset of  CMAKE_CROSS_CONFIGS  or  be  the  same  as
       CMAKE_DEFAULT_BUILD_TYPE.   It  must  not  be  specified  if  CMAKE_DEFAULT_BUILD_TYPE  or
       CMAKE_CROSS_CONFIGS is not used.

   CMAKE_DEPENDS_USE_COMPILER
       New in version 3.20.

       For the Makefile Generators, source dependencies are now, for a  selection  of  compilers,
       generated  by  the  compiler  itself.  By defining this variable with value FALSE, you can
       restore the legacy behavior (i.e. using CMake for dependencies discovery).

   CMAKE_DISABLE_PRECOMPILE_HEADERS
       New in version 3.16.

       Default value for DISABLE_PRECOMPILE_HEADERS of targets.

       By default CMAKE_DISABLE_PRECOMPILE_HEADERS is OFF.

   CMAKE_DLL_NAME_WITH_SOVERSION
       New in version 3.27.

       This variable is used to initialize the DLL_NAME_WITH_SOVERSION property on shared library
       targets for the Windows platform, which is selected when the WIN32 variable is set.

       See this target property for additional information.

       Please  note  that setting this variable has no effect if versioned filenames are globally
       disabled with the CMAKE_PLATFORM_NO_VERSIONED_SONAME variable.

   CMAKE_ENABLE_EXPORTS
       New in version 3.4.

       Specify whether executables export symbols for loadable modules.

       This variable is used to initialize the  ENABLE_EXPORTS  target  property  for  executable
       targets  when they are created by calls to the add_executable() command.  See the property
       documentation for details.

       This variable has been superseded by the CMAKE_EXECUTABLE_ENABLE_EXPORTS variable.  It  is
       provided  for  backward compatibility with older CMake code, but should not be used in new
       projects.

   CMAKE_EXECUTABLE_ENABLE_EXPORTS
       New in version 3.27.

       Specify whether executables export symbols for loadable modules.

       This variable is used to initialize the  ENABLE_EXPORTS  target  property  for  executable
       targets  when they are created by calls to the add_executable() command.  See the property
       documentation for details.

       This variable supersede the CMAKE_ENABLE_EXPORTS variable.

   CMAKE_EXE_LINKER_FLAGS
       Linker flags to be used to create executables.

       These flags will be used by the linker when creating an executable.

   CMAKE_EXE_LINKER_FLAGS_<CONFIG>
       Flags to be used when linking an executable.

       Same as CMAKE_C_FLAGS_* but used by the linker when creating executables.

   CMAKE_EXE_LINKER_FLAGS_<CONFIG>_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_EXE_LINKER_FLAGS_<CONFIG> cache entry the first time  a
       build  tree  is  configured.  This variable is meant to be set by a toolchain file.  CMake
       may prepend or append content to the value based on the environment and target platform.

       See also CMAKE_EXE_LINKER_FLAGS_INIT.

   CMAKE_EXE_LINKER_FLAGS_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_EXE_LINKER_FLAGS cache entry the  first  time  a  build
       tree  is  configured.   This  variable  is meant to be set by a toolchain file.  CMake may
       prepend or append content to the value based on the environment and target platform.

       See also the configuration-specific variable CMAKE_EXE_LINKER_FLAGS_<CONFIG>_INIT.

   CMAKE_FOLDER
       New in version 3.12.

       Set the folder name. Use to organize targets in an IDE.

       This variable is used to initialize the FOLDER property on  all  the  targets.   See  that
       target property for additional information.

   CMAKE_Fortran_FORMAT
       Set to FIXED or FREE to indicate the Fortran source layout.

       This  variable  is used to initialize the Fortran_FORMAT property on all the targets.  See
       that target property for additional information.

   CMAKE_Fortran_MODULE_DIRECTORY
       Fortran module output directory.

       This variable is used to initialize  the  Fortran_MODULE_DIRECTORY  property  on  all  the
       targets.  See that target property for additional information.

   CMAKE_Fortran_PREPROCESS
       New in version 3.18.

       Default value for Fortran_PREPROCESS of targets.

       This  variable  is  used to initialize the Fortran_PREPROCESS property on all the targets.
       See that target property for additional information.

   CMAKE_FRAMEWORK
       New in version 3.15.

       Default value for FRAMEWORK of targets.

       This variable is used to initialize the FRAMEWORK property on all the targets.   See  that
       target property for additional information.

   CMAKE_FRAMEWORK_MULTI_CONFIG_POSTFIX_<CONFIG>
       New in version 3.18.

       Default  framework filename postfix under configuration <CONFIG> when using a multi-config
       generator.

       When a framework target  is  created  its  FRAMEWORK_MULTI_CONFIG_POSTFIX_<CONFIG>  target
       property is initialized with the value of this variable if it is set.

   CMAKE_GHS_NO_SOURCE_GROUP_FILE
       New in version 3.14.

       ON  / OFF boolean to control if the project file for a target should be one single file or
       multiple files.  Refer to GHS_NO_SOURCE_GROUP_FILE for further details.

   CMAKE_GLOBAL_AUTOGEN_TARGET
       New in version 3.14.

       Switch to enable generation of a global autogen target.

       When CMAKE_GLOBAL_AUTOGEN_TARGET is enabled, a custom target autogen is  generated.   This
       target  depends  on  all  AUTOMOC  and  AUTOUIC  generated <ORIGIN>_autogen targets in the
       project.  By building the global autogen target, all AUTOMOC  and  AUTOUIC  files  in  the
       project will be generated.

       The    name    of    the    global    autogen   target   can   be   changed   by   setting
       CMAKE_GLOBAL_AUTOGEN_TARGET_NAME.

       By default CMAKE_GLOBAL_AUTOGEN_TARGET is unset.

       See the cmake-qt(7) manual for more information on using CMake with Qt.

   Note
       <ORIGIN>_autogen targets by default inherit  their  origin  target's  dependencies.   This
       might result in unintended dependency target builds when only <ORIGIN>_autogen targets are
       built.  A solution is to disable AUTOGEN_ORIGIN_DEPENDS on the respective origin targets.

   CMAKE_GLOBAL_AUTOGEN_TARGET_NAME
       New in version 3.14.

       Change the name of the global autogen target.

       When CMAKE_GLOBAL_AUTOGEN_TARGET is enabled, a  global  custom  target  named  autogen  is
       created.  CMAKE_GLOBAL_AUTOGEN_TARGET_NAME allows to set a different name for that target.

       By default CMAKE_GLOBAL_AUTOGEN_TARGET_NAME is unset.

       See the cmake-qt(7) manual for more information on using CMake with Qt.

   CMAKE_GLOBAL_AUTORCC_TARGET
       New in version 3.14.

       Switch to enable generation of a global autorcc target.

       When  CMAKE_GLOBAL_AUTORCC_TARGET  is  enabled, a custom target autorcc is generated. This
       target depends on all AUTORCC generated <ORIGIN>_arcc_<QRC> targets in  the  project.   By
       building the global autorcc target, all AUTORCC files in the project will be generated.

       The    name    of    the    global    autorcc   target   can   be   changed   by   setting
       CMAKE_GLOBAL_AUTORCC_TARGET_NAME.

       By default CMAKE_GLOBAL_AUTORCC_TARGET is unset.

       See the cmake-qt(7) manual for more information on using CMake with Qt.

   CMAKE_GLOBAL_AUTORCC_TARGET_NAME
       New in version 3.14.

       Change the name of the global autorcc target.

       When CMAKE_GLOBAL_AUTORCC_TARGET is enabled, a  global  custom  target  named  autorcc  is
       created.  CMAKE_GLOBAL_AUTORCC_TARGET_NAME allows to set a different name for that target.

       By default CMAKE_GLOBAL_AUTORCC_TARGET_NAME is unset.

       See the cmake-qt(7) manual for more information on using CMake with Qt.

   CMAKE_GNUtoMS
       Convert GNU import libraries (.dll.a) to MS format (.lib).

       This variable is used to initialize the GNUtoMS property on targets when they are created.
       See that target property for additional information.

   CMAKE_INCLUDE_CURRENT_DIR
       Automatically add the current source and build directories to the include path.

       If this  variable  is  enabled,  CMake  automatically  adds  CMAKE_CURRENT_SOURCE_DIR  and
       CMAKE_CURRENT_BINARY_DIR to the include path for each directory.  These additional include
       directories  do  not  propagate  down  to  subdirectories.   This  is  useful  mainly  for
       out-of-source  builds,  where  files  generated  into the build tree are included by files
       located in the source tree.

       By default CMAKE_INCLUDE_CURRENT_DIR is OFF.

   CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE
       Automatically   add   the    current    source    and    build    directories    to    the
       INTERFACE_INCLUDE_DIRECTORIES target property.

       If  this  variable  is  enabled,  CMake automatically adds for each shared library target,
       static library target, module target and executable target,  CMAKE_CURRENT_SOURCE_DIR  and
       CMAKE_CURRENT_BINARY_DIR to the INTERFACE_INCLUDE_DIRECTORIES target property.  By default
       CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE is OFF.

   CMAKE_INSTALL_NAME_DIR
       Directory name for installed targets on Apple platforms.

       CMAKE_INSTALL_NAME_DIR is used to initialize the INSTALL_NAME_DIR property on all targets.
       See that target property for more information.

   CMAKE_INSTALL_REMOVE_ENVIRONMENT_RPATH
       New in version 3.16.

       Sets   the   default  for  whether  toolchain-defined  rpaths  should  be  removed  during
       installation.

       CMAKE_INSTALL_REMOVE_ENVIRONMENT_RPATH is a boolean that provides the  default  value  for
       the INSTALL_REMOVE_ENVIRONMENT_RPATH property of all subsequently created targets.

   CMAKE_INSTALL_RPATH
       The rpath to use for installed targets.

       A semicolon-separated list specifying the rpath to use in installed targets (for platforms
       that support it).  This is used to initialize the target property  INSTALL_RPATH  for  all
       targets.

   CMAKE_INSTALL_RPATH_USE_LINK_PATH
       Add paths to linker search and installed rpath.

       CMAKE_INSTALL_RPATH_USE_LINK_PATH  is  a  boolean  that  if set to True will append to the
       runtime search path (rpath) of installed binaries any directories outside the project that
       are  in  the  linker  search  path  or  contain linked library files.  The directories are
       appended after the value of the INSTALL_RPATH target property.

       This variable is used to initialize the target  property  INSTALL_RPATH_USE_LINK_PATH  for
       all targets.

   CMAKE_INTERPROCEDURAL_OPTIMIZATION
       New in version 3.9.

       Default value for INTERPROCEDURAL_OPTIMIZATION of targets.

       This  variable  is used to initialize the INTERPROCEDURAL_OPTIMIZATION property on all the
       targets.  See that target property for additional information.

   CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
       New in version 3.9.

       Default value for INTERPROCEDURAL_OPTIMIZATION_<CONFIG> of targets.

       This variable is used to initialize the INTERPROCEDURAL_OPTIMIZATION_<CONFIG> property  on
       all the targets.  See that target property for additional information.

   CMAKE_IOS_INSTALL_COMBINED
       New in version 3.5.

       Default value for IOS_INSTALL_COMBINED of targets.

       This  variable is used to initialize the IOS_INSTALL_COMBINED property on all the targets.
       See that target property for additional information.

   CMAKE_<LANG>_CLANG_TIDY
       New in version 3.6.

       Default value for <LANG>_CLANG_TIDY target property when <LANG> is C, CXX, OBJC or OBJCXX.

       This variable is used to initialize the property on each target as  it  is  created.   For
       example:

          set(CMAKE_CXX_CLANG_TIDY clang-tidy -checks=-*,readability-*)
          add_executable(foo foo.cxx)

   CMAKE_<LANG>_CLANG_TIDY_EXPORT_FIXES_DIR
       New in version 3.26.

       Default  value  for  <LANG>_CLANG_TIDY_EXPORT_FIXES_DIR  target property when <LANG> is C,
       CXX, OBJC or OBJCXX.

       This variable is used to initialize the property on each target as  it  is  created.   For
       example:

          set(CMAKE_CXX_CLANG_TIDY_EXPORT_FIXES_DIR clang-tidy-fixes)
          add_executable(foo foo.cxx)

   CMAKE_<LANG>_COMPILER_LAUNCHER
       New in version 3.4.

       Default  value  for  <LANG>_COMPILER_LAUNCHER  target  property.  This variable is used to
       initialize the property on each target as it is created.  This is done only when <LANG> is
       C, CXX, Fortran, HIP, ISPC, OBJC, OBJCXX, or CUDA.

       This variable is initialized to the CMAKE_<LANG>_COMPILER_LAUNCHER environment variable if
       it is set.

   CMAKE_<LANG>_CPPCHECK
       New in version 3.10.

       Default value for <LANG>_CPPCHECK target property. This variable is used to initialize the
       property on each target as it is created.  This is done only when <LANG> is C or CXX.

   CMAKE_<LANG>_CPPLINT
       New in version 3.8.

       Default  value for <LANG>_CPPLINT target property. This variable is used to initialize the
       property on each target as it is created.  This is done only when <LANG> is C or CXX.

   CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE
       New in version 3.3.

       Default value for <LANG>_INCLUDE_WHAT_YOU_USE target property.  This variable is  used  to
       initialize the property on each target as it is created.  This is done only when <LANG> is
       C or CXX.

   CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>
       New in version 3.24.

       This variable defines how to link a group of libraries for the specified <FEATURE> when  a
       LINK_GROUP  generator  expression  is used and the link language for the target is <LANG>.
       For     this     variable      to      have      any      effect,      the      associated
       CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>_SUPPORTED variable must be set to true.

       The  CMAKE_LINK_GROUP_USING_<FEATURE> variable should be defined instead for features that
       are independent of the link language.

       Feature names are case-sensitive and may only contain letters,  numbers  and  underscores.
       Feature names defined in all uppercase are reserved for CMake's own built-in features (see
       Predefined Features further below).

   Feature Definitions
       A group feature definition is a list that contains exactly two elements:

          <PREFIX> <SUFFIX>

       On the linker command line, <PREFIX> will precede the list of libraries in the  group  and
       <SUFFIX> will follow after.

       For the elements of this variable, the LINKER: prefix can be used.

       To  pass options to the linker tool, each compiler driver has its own syntax.  The LINKER:
       prefix and , separator can be used to specify, in a portable way, options to pass  to  the
       linker tool. LINKER: is replaced by the appropriate driver option and , by the appropriate
       driver separator.  The driver prefix and driver separator are given by the values  of  the
       CMAKE_<LANG>_LINKER_WRAPPER_FLAG and CMAKE_<LANG>_LINKER_WRAPPER_FLAG_SEP variables.

       For  example, "LINKER:-z,defs" becomes -Xlinker -z -Xlinker defs for Clang and -Wl,-z,defs
       for GNU GCC.

       The LINKER: prefix can be specified as part of a SHELL: prefix expression.

       The LINKER: prefix supports, as an alternative syntax, specification  of  arguments  using
       the   SHELL:   prefix   and   space  as  separator.  The  previous  example  then  becomes
       "LINKER:SHELL:-z defs".

       NOTE:
          Specifying the SHELL: prefix anywhere other than at the beginning of the LINKER: prefix
          is not supported.

   Examples
   Solving cross-references between two static libraries
       A project may define two or more static libraries which have circular dependencies between
       them.  In order for the linker to resolve all symbols at link time, it may need to  search
       repeatedly  among  the libraries until no new undefined references are created.  Different
       linkers use different syntax for achieving this.  The following example shows how this may
       be  implemented  for  some  linkers.   Note  that  this is for illustration purposes only.
       Projects should use the built-in RESCAN group feature instead (see  Predefined  Features),
       which provides a more complete and more robust implementation of this functionality.

          set(CMAKE_C_LINK_GROUP_USING_cross_refs_SUPPORTED TRUE)
          if(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
            set(CMAKE_C_LINK_GROUP_USING_cross_refs
              "LINKER:--start-group"
              "LINKER:--end-group"
            )
          elseif(CMAKE_C_COMPILER_ID STREQUAL "SunPro" AND CMAKE_SYSTEM_NAME STREQUAL "SunOS")
            set(CMAKE_C_LINK_GROUP_USING_cross_refs
              "LINKER:-z,rescan-start"
              "LINKER:-z,rescan-end"
            )
          else()
            # feature not yet supported for the other environments
            set(CMAKE_C_LINK_GROUP_USING_cross_refs_SUPPORTED FALSE)
          endif()

          add_library(lib1 STATIC ...)
          add_library(lib2 SHARED ...)

          if(CMAKE_C_LINK_GROUP_USING_cross_refs_SUPPORTED)
            target_link_libraries(lib2 PRIVATE "$<LINK_GROUP:cross_refs,lib1,external>")
          else()
            target_link_libraries(lib2 PRIVATE lib1 external)
          endif()

       CMake will generate the following linker command line fragments when linking lib2:

       • GNU: -Wl,--start-group /path/to/lib1.a -lexternal -Wl,--end-groupSunPro: -Wl,-z,rescan-start /path/to/lib1.a -lexternal -Wl,-z,rescan-end

   Predefined Features
       The following built-in group features are pre-defined by CMake:

       RESCAN Some  linkers  are single-pass only.  For such linkers, circular references between
              libraries typically result in  unresolved  symbols.   This  feature  instructs  the
              linker  to  search the specified static libraries repeatedly until no new undefined
              references are created.

              Normally, a static library is searched only once in the order that it is  specified
              on the command line.  If a symbol in that library is needed to resolve an undefined
              symbol referred to by an object in a library that  appears  later  on  the  command
              line,  the  linker  would  not  be able to resolve that reference.  By grouping the
              static libraries with the RESCAN feature, they  will  all  be  searched  repeatedly
              until  all  possible  references  are  resolved.  This will use linker options like
              --start-group and --end-group, or on SunOS, -z rescan-start and -z rescan-end.

              Using this feature has a significant performance cost. It is best to  use  it  only
              when  there  are  unavoidable  circular  references  between  two  or  more  static
              libraries.

              This feature is available when using toolchains that target Linux, BSD, and  SunOS.
              It can also be used when targeting Windows platforms if the GNU toolchain is used.

   CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>_SUPPORTED
       New in version 3.24.

       This  variable  specifies whether the <FEATURE> is supported for the link language <LANG>.
       If   this   variable   is   true,   then   the    <FEATURE>    must    be    defined    by
       CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>,         and        the        more        generic
       CMAKE_LINK_GROUP_USING_<FEATURE>_SUPPORTED and CMAKE_LINK_GROUP_USING_<FEATURE>  variables
       are not used.

       If  CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>_SUPPORTED  is  false  or  is not set, then the
       CMAKE_LINK_GROUP_USING_<FEATURE>_SUPPORTED variable will determine  whether  <FEATURE>  is
       deemed to be supported.

   CMAKE_<LANG>_LINK_LIBRARY_FILE_FLAG
       New in version 3.16.

       Language-specific flag to be used to link a library specified by a path to its file.

       The  flag  will be used before a library file path is given to the linker.  This is needed
       only on very few platforms.

   CMAKE_<LANG>_LINK_LIBRARY_FLAG
       New in version 3.16.

       Flag to be used to link a library into a shared library or executable.

       This flag will be used to specify a library to link to a shared library or  an  executable
       for the specific language.  On most compilers this is -l.

   CMAKE_<LANG>_LINK_LIBRARY_USING_<FEATURE>
       New in version 3.24.

       This  variable defines how to link a library or framework for the specified <FEATURE> when
       a LINK_LIBRARY generator expression is used and  the  link  language  for  the  target  is
       <LANG>.      For     this    variable    to    have    any    effect,    the    associated
       CMAKE_<LANG>_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED variable must be set to true.

       The CMAKE_LINK_LIBRARY_USING_<FEATURE> variable should be  defined  instead  for  features
       that are independent of the link language.

       Feature  names  are  case-sensitive and may only contain letters, numbers and underscores.
       Feature names defined in all uppercase are reserved for CMake's own built-in features (see
       Predefined Features further below).

   Feature Definitions
       A library feature definition is a list that contains one or three elements:

          [<PREFIX>] <LIBRARY_EXPRESSION> [<SUFFIX>]

       When  <PREFIX>  and <SUFFIX> are specified, they precede and follow respectively the whole
       list of libraries  specified  in  the  LINK_LIBRARY  expression,  not  each  library  item
       individually.   There  is  no  guarantee that the list of specified libraries will be kept
       grouped together though, so the <PREFIX> and <SUFFIX> may appear more  than  once  if  the
       library  list is reorganized by CMake to satisfy other constraints.  This means constructs
       like --start-group and --end-group, as supported by the GNU ld linker, cannot be  used  in
       this way.  The LINK_GROUP generator expression should be used instead for such constructs.

       <LIBRARY_EXPRESSION>  is  used  to  specify the pattern for constructing the corresponding
       fragment on the linker command line for each library.  The following placeholders  can  be
       used in the expression:

       • <LIBRARY>  is  expanded  to  the  full  path  to  the library for CMake targets, or to a
         platform-specific value based on the item otherwise (the same as <LINK_ITEM> on Windows,
         or the library base name for other platforms).

       • <LINK_ITEM>  is  expanded  to  how  the  library  would normally be linked on the linker
         command line.

       • <LIB_ITEM> is expanded to the full path to the library for CMake targets,  or  the  item
         itself exactly as specified in the <LIBRARY_EXPRESSION> otherwise.

       In  addition to the above, it is possible to have one pattern for paths (CMake targets and
       external libraries specified with file paths) and another for  other  items  specified  by
       name  only.  The PATH{} and NAME{} wrappers can be used to provide the expansion for those
       two cases, respectively.  When wrappers are used, both must be present.  For example:

          set(CMAKE_LINK_LIBRARY_USING_weak_library
              "PATH{-weak_library <LIBRARY>}NAME{LINKER:-weak-l<LIB_ITEM>}"
          )

       For all three elements of this variable (<PREFIX>,  <LIBRARY_EXPRESSION>,  and  <SUFFIX>),
       the LINKER: prefix can be used.

       To  pass options to the linker tool, each compiler driver has its own syntax.  The LINKER:
       prefix and , separator can be used to specify, in a portable way, options to pass  to  the
       linker tool. LINKER: is replaced by the appropriate driver option and , by the appropriate
       driver separator.  The driver prefix and driver separator are given by the values  of  the
       CMAKE_<LANG>_LINKER_WRAPPER_FLAG and CMAKE_<LANG>_LINKER_WRAPPER_FLAG_SEP variables.

       For  example, "LINKER:-z,defs" becomes -Xlinker -z -Xlinker defs for Clang and -Wl,-z,defs
       for GNU GCC.

       The LINKER: prefix can be specified as part of a SHELL: prefix expression.

       The LINKER: prefix supports, as an alternative syntax, specification  of  arguments  using
       the   SHELL:   prefix   and   space  as  separator.  The  previous  example  then  becomes
       "LINKER:SHELL:-z defs".

       NOTE:
          Specifying the SHELL: prefix anywhere other than at the beginning of the LINKER: prefix
          is not supported.

   Examples
   Loading a whole static library
       A  common need is to prevent the linker from discarding any symbols from a static library.
       Different linkers use different syntax for achieving this.  The  following  example  shows
       how this may be implemented for some linkers.  Note that this is for illustration purposes
       only.  Projects should use the built-in  WHOLE_ARCHIVE  feature  instead  (see  Predefined
       Features),  which  provides  a  more  complete  and  more  robust  implementation  of this
       functionality.

          set(CMAKE_C_LINK_LIBRARY_USING_load_archive_SUPPORTED TRUE)
          if(CMAKE_C_COMPILER_ID STREQUAL "AppleClang")
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive "-force_load <LIB_ITEM>")
          elseif(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive
              "LINKER:--push-state,--whole-archive"
              "<LINK_ITEM>"
              "LINKER:--pop-state"
            )
          elseif(CMAKE_C_COMPILER_ID STREQUAL "MSVC")
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive "/WHOLEARCHIVE:<LIBRARY>")
          else()
            # feature not yet supported for the other environments
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive_SUPPORTED FALSE)
          endif()

          add_library(lib1 STATIC ...)
          add_library(lib2 SHARED ...)

          if(CMAKE_C_LINK_LIBRARY_USING_load_archive_SUPPORTED)
            # The -force_load Apple linker option requires a file name
            set(external_lib
              "$<IF:$<LINK_LANG_AND_ID:C,AppleClang>,libexternal.a,external>"
            )
            target_link_libraries(lib2 PRIVATE
              "$<LINK_LIBRARY:load_archive,lib1,${external_lib}>"
            )
          else()
            target_link_libraries(lib2 PRIVATE lib1 external)
          endif()

       CMake will generate the following link expressions:

       • AppleClang: -force_load /path/to/lib1.a -force_load libexternal.aGNU: -Wl,--push-state,--whole-archive /path/to/lib1.a -lexternal -Wl,--pop-stateMSVC: /WHOLEARCHIVE:/path/to/lib1.lib /WHOLEARCHIVE:external.lib

   Linking a library as weak
       On macOS, it is possible to link a library in weak mode (the library  and  all  references
       are marked as weak imports).  Different flags must be used for a library specified by file
       path compared to one specified by name.  This constraint can be solved  using  PATH{}  and
       NAME{}  wrappers.  Again, the following example shows how this may be implemented for some
       linkers, but it is for illustration purposes  only.   Projects  should  use  the  built-in
       WEAK_FRAMEWORK  or  WEAK_LIBRARY features instead (see Predefined Features), which provide
       more complete and more robust implementations of this functionality.

          if (CMAKE_C_COMPILER_ID STREQUAL "AppleClang")
            set(CMAKE_LINK_LIBRARY_USING_weak_library
                "PATH{-weak_library <LIBRARY>}NAME{LINKER:-weak-l<LIB_ITEM>}"
            )
            set(CMAKE_LINK_LIBRARY_USING_weak_library_SUPPORTED TRUE)
          endif()

          add_library(lib SHARED ...)
          add_executable(main ...)
          if(CMAKE_LINK_LIBRARY_USING_weak_library_SUPPORTED)
            target_link_libraries(main PRIVATE "$<LINK_LIBRARY:weak_library,lib,external>")
          else()
            target_link_libraries(main PRIVATE lib external)
          endif()

       CMake will generate the following linker command line fragment when linking main using the
       AppleClang toolchain:

       -weak_library /path/to/lib -Xlinker -weak-lexternal.

   Predefined Features
       The following built-in library features are pre-defined by CMake:

       DEFAULT
              This  feature  corresponds  to standard linking, essentially equivalent to using no
              feature at all.  It is typically  only  used  with  the  LINK_LIBRARY_OVERRIDE  and
              LINK_LIBRARY_OVERRIDE_<LIBRARY> target properties.

       WHOLE_ARCHIVE
              Force inclusion of all members of a static library.  This feature is only supported
              for the following platforms, with limitations as noted:

              • Linux.

              • All BSD variants.

              • SunOS.

              • All Apple variants.  The library must be specified as  a  CMake  target  name,  a
                library  file  name  (such  as  libfoo.a),  or  a  library  file  path  (such  as
                /path/to/libfoo.a).  Due to a limitation  of  the  Apple  linker,  it  cannot  be
                specified as a plain library name like foo, where foo is not a CMake target.

              • Windows.   When  using  a  MSVC  or MSVC-like toolchain, the MSVC version must be
                greater than 1900.

              • Cygwin.

              • MSYS.

       FRAMEWORK
              This option tells the linker to  search  for  the  specified  framework  using  the
              -framework  linker option.  It can only be used on Apple platforms, and only with a
              linker that understands the option used (i.e. the linker provided  with  Xcode,  or
              one compatible with it).

              The  framework can be specified as a CMake framework target, a bare framework name,
              or a file path.  If a target is given, that target must have the  FRAMEWORK  target
              property  set  to  true.   For  a  file path, if it contains a directory part, that
              directory will be added as a framework search path.

                 add_library(lib SHARED ...)
                 target_link_libraries(lib PRIVATE "$<LINK_LIBRARY:FRAMEWORK,/path/to/my_framework>")

                 # The constructed linker command line will contain:
                 #   -F/path/to -framework my_framework

              File paths must conform to one of the following patterns  (*  is  a  wildcard,  and
              optional parts are shown as [...]):

                 • [/path/to/]FwName[.framework][/path/to/]FwName.framework/FwName[suffix][/path/to/]FwName.framework/Versions/*/FwName[suffix]

              Note  that  CMake  recognizes  and  automatically  handles  framework targets, even
              without  using  the  $<LINK_LIBRARY:FRAMEWORK,...>   expression.    The   generator
              expression  can  still  be  used  with  a  CMake  target if the project wants to be
              explicit about it, but it is not required to do so.  The linker  command  line  may
              have  some differences between using the generator expression or not, but the final
              result should be the same.  On the other hand, if a file path is given, CMake  will
              recognize some paths automatically, but not all cases.  The project may want to use
              $<LINK_LIBRARY:FRAMEWORK,...> for file paths  so  that  the  expected  behavior  is
              clear.

              New in version 3.25: The FRAMEWORK_MULTI_CONFIG_POSTFIX_<CONFIG> target property as
              well as the suffix of the framework library name are now supported by the FRAMEWORK
              features.

       NEEDED_FRAMEWORK
              This  is similar to the FRAMEWORK feature, except it forces the linker to link with
              the framework even if no symbols are used from it.  It uses  the  -needed_framework
              option and has the same linker constraints as FRAMEWORK.

       REEXPORT_FRAMEWORK
              This  is  similar  to  the  FRAMEWORK  feature, except it tells the linker that the
              framework should be available to clients linking to the library being created.   It
              uses  the  -reexport_framework  option  and  has  the  same  linker  constraints as
              FRAMEWORK.

       WEAK_FRAMEWORK
              This is similar to the FRAMEWORK feature, except it forces the linker to  mark  the
              framework  and  all  references to it as weak imports.  It uses the -weak_framework
              option and has the same linker constraints as FRAMEWORK.

       NEEDED_LIBRARY
              This is similar to  the  NEEDED_FRAMEWORK  feature,  except  it  is  for  use  with
              non-framework   targets   or   libraries  (Apple  platforms  only).   It  uses  the
              -needed_library or -needed-l  option  as  appropriate,  and  has  the  same  linker
              constraints as NEEDED_FRAMEWORK.

       REEXPORT_LIBRARY
              This  is  similar  to  the  REEXPORT_FRAMEWORK  feature,  except it is for use with
              non-framework  targets  or  libraries  (Apple  platforms  only).    It   uses   the
              -reexport_library  or  -reexport-l  option  as appropriate, and has the same linker
              constraints as REEXPORT_FRAMEWORK.

       WEAK_LIBRARY
              This is  similar  to  the  WEAK_FRAMEWORK  feature,  except  it  is  for  use  with
              non-framework   targets   or   libraries  (Apple  platforms  only).   It  uses  the
              -weak_library or -weak-l option as appropriate, and has the same linker constraints
              as WEAK_FRAMEWORK.

   CMAKE_<LANG>_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED
       New in version 3.24.

       Set      to      TRUE     if     the     <FEATURE>,     as     defined     by     variable
       CMAKE_<LANG>_LINK_LIBRARY_USING_<FEATURE>, is supported for the linker language <LANG>.

       NOTE:
          This    variable    is    evaluated    before     the     more     generic     variable
          CMAKE_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED.

   CMAKE_<LANG>_LINK_WHAT_YOU_USE_FLAG
       New in version 3.22.

       Linker  flag to be used to configure linker so that all specified libraries on the command
       line will be linked into the target.

       See also variable CMAKE_LINK_WHAT_YOU_USE_CHECK.

   CMAKE_<LANG>_LINKER_LAUNCHER
       New in version 3.21.

       Default value for  <LANG>_LINKER_LAUNCHER  target  property.  This  variable  is  used  to
       initialize the property on each target as it is created.  This is done only when <LANG> is
       C, CXX, OBJC, or OBJCXX.

       This variable is initialized to the CMAKE_<LANG>_LINKER_LAUNCHER environment  variable  if
       it is set.

   CMAKE_<LANG>_VISIBILITY_PRESET
       Default value for the <LANG>_VISIBILITY_PRESET target property when a target is created.

   CMAKE_LIBRARY_OUTPUT_DIRECTORY
       Where to put all the LIBRARY target files when built.

       This  variable  is  used  to  initialize  the LIBRARY_OUTPUT_DIRECTORY property on all the
       targets.  See that target property for additional information.

   CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
       New in version 3.3.

       Where to put all the LIBRARY target files when built for a specific configuration.

       This variable is used to initialize the LIBRARY_OUTPUT_DIRECTORY_<CONFIG> property on  all
       the targets.  See that target property for additional information.

   CMAKE_LIBRARY_PATH_FLAG
       The flag to be used to add a library search path to a compiler.

       The  flag  will be used to specify a library directory to the compiler.  On most compilers
       this is -L.

   CMAKE_LINK_DEF_FILE_FLAG
       Linker flag to be used to specify a .def file for dll creation.

       The flag will be used to add a .def file when creating a dll  on  Windows;  this  is  only
       defined on Windows.

   CMAKE_LINK_DEPENDS_NO_SHARED
       Whether to skip link dependencies on shared library files.

       This  variable  initializes  the  LINK_DEPENDS_NO_SHARED property on targets when they are
       created.  See that target property for additional information.

   CMAKE_LINK_DEPENDS_USE_LINKER
       New in version 3.27.

       For the Makefile and Ninja generators, link dependencies  are  now,  for  a  selection  of
       linkers,  generated  by the linker itself. By defining this variable with value FALSE, you
       can deactivate this feature.

       This feature is also deactivated if the LINK_DEPENDS_NO_SHARED target property is true.

       NOTE:
          CMake version 3.27.4 defaults this variable to FALSE because GNU binutils linkers  (ld,
          ld.bfd, ld.gold) generate spurious dependencies on temporary files when LTO is enabled.
          See GNU bug 30568.

   CMAKE_LINK_GROUP_USING_<FEATURE>
       New in version 3.24.

       This variable defines how to link a group of libraries for the specified <FEATURE> when  a
       LINK_GROUP generator expression is used.  Both of the following conditions must be met for
       this variable to have any effect:

       • The associated CMAKE_LINK_GROUP_USING_<FEATURE>_SUPPORTED variable must be set to true.

       • There  is  no  language-specific  definition  for  the  same  <FEATURE>.    This   means
         CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>_SUPPORTED  cannot  be true for the link language
         used by the target for which the LINK_GROUP generator expression is evaluated.

       The  CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>  variable  should  be  defined  instead   for
       features that are dependent on the link language.

       Feature  names  are  case-sensitive and may only contain letters, numbers and underscores.
       Feature names defined in all uppercase are reserved for CMake's own built-in features (see
       Predefined Features further below).

   Feature Definitions
       A group feature definition is a list that contains exactly two elements:

          <PREFIX> <SUFFIX>

       On  the  linker command line, <PREFIX> will precede the list of libraries in the group and
       <SUFFIX> will follow after.

       For the elements of this variable, the LINKER: prefix can be used.

       To pass options to the linker tool, each compiler driver has its own syntax.  The  LINKER:
       prefix  and  , separator can be used to specify, in a portable way, options to pass to the
       linker tool. LINKER: is replaced by the appropriate driver option and , by the appropriate
       driver  separator.   The driver prefix and driver separator are given by the values of the
       CMAKE_<LANG>_LINKER_WRAPPER_FLAG and CMAKE_<LANG>_LINKER_WRAPPER_FLAG_SEP variables.

       For example, "LINKER:-z,defs" becomes -Xlinker -z -Xlinker defs for Clang and  -Wl,-z,defs
       for GNU GCC.

       The LINKER: prefix can be specified as part of a SHELL: prefix expression.

       The  LINKER:  prefix  supports, as an alternative syntax, specification of arguments using
       the  SHELL:  prefix  and  space  as  separator.  The   previous   example   then   becomes
       "LINKER:SHELL:-z defs".

       NOTE:
          Specifying the SHELL: prefix anywhere other than at the beginning of the LINKER: prefix
          is not supported.

   Examples
   Solving cross-references between two static libraries
       A project may define two or more static libraries which have circular dependencies between
       them.   In order for the linker to resolve all symbols at link time, it may need to search
       repeatedly among the libraries until no new undefined references are  created.   Different
       linkers use different syntax for achieving this.  The following example shows how this may
       be implemented for some linkers.  Note  that  this  is  for  illustration  purposes  only.
       Projects  should  use the built-in RESCAN group feature instead (see Predefined Features),
       which provides a more complete and more robust implementation of this functionality.

          set(CMAKE_C_LINK_GROUP_USING_cross_refs_SUPPORTED TRUE)
          if(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
            set(CMAKE_C_LINK_GROUP_USING_cross_refs
              "LINKER:--start-group"
              "LINKER:--end-group"
            )
          elseif(CMAKE_C_COMPILER_ID STREQUAL "SunPro" AND CMAKE_SYSTEM_NAME STREQUAL "SunOS")
            set(CMAKE_C_LINK_GROUP_USING_cross_refs
              "LINKER:-z,rescan-start"
              "LINKER:-z,rescan-end"
            )
          else()
            # feature not yet supported for the other environments
            set(CMAKE_C_LINK_GROUP_USING_cross_refs_SUPPORTED FALSE)
          endif()

          add_library(lib1 STATIC ...)
          add_library(lib2 SHARED ...)

          if(CMAKE_C_LINK_GROUP_USING_cross_refs_SUPPORTED)
            target_link_libraries(lib2 PRIVATE "$<LINK_GROUP:cross_refs,lib1,external>")
          else()
            target_link_libraries(lib2 PRIVATE lib1 external)
          endif()

       CMake will generate the following linker command line fragments when linking lib2:

       • GNU: -Wl,--start-group /path/to/lib1.a -lexternal -Wl,--end-groupSunPro: -Wl,-z,rescan-start /path/to/lib1.a -lexternal -Wl,-z,rescan-end

   Predefined Features
       The following built-in group features are pre-defined by CMake:

       RESCAN Some linkers are single-pass only.  For such linkers, circular  references  between
              libraries  typically  result  in  unresolved  symbols.   This feature instructs the
              linker to search the specified static libraries repeatedly until no  new  undefined
              references are created.

              Normally,  a static library is searched only once in the order that it is specified
              on the command line.  If a symbol in that library is needed to resolve an undefined
              symbol  referred  to  by  an  object in a library that appears later on the command
              line, the linker would not be able to resolve  that  reference.   By  grouping  the
              static  libraries  with  the  RESCAN  feature, they will all be searched repeatedly
              until all possible references are resolved.  This  will  use  linker  options  like
              --start-group and --end-group, or on SunOS, -z rescan-start and -z rescan-end.

              Using  this  feature  has a significant performance cost. It is best to use it only
              when  there  are  unavoidable  circular  references  between  two  or  more  static
              libraries.

              This  feature is available when using toolchains that target Linux, BSD, and SunOS.
              It can also be used when targeting Windows platforms if the GNU toolchain is used.

   CMAKE_LINK_GROUP_USING_<FEATURE>_SUPPORTED
       New in version 3.24.

       This variable specifies  whether  the  <FEATURE>  is  supported  regardless  of  the  link
       language.    If   this   variable   is  true,  then  the  <FEATURE>  must  be  defined  by
       CMAKE_LINK_GROUP_USING_<FEATURE>.

       Note that this variable has no effect if CMAKE_<LANG>_LINK_GROUP_USING_<FEATURE>_SUPPORTED
       is true for the link language of the target.

   CMAKE_LINK_INTERFACE_LIBRARIES
       Default value for LINK_INTERFACE_LIBRARIES of targets.

       This  variable  is  used  to  initialize  the LINK_INTERFACE_LIBRARIES property on all the
       targets.  See that target property for additional information.

   CMAKE_LINK_LIBRARY_FILE_FLAG
       Flag to be used to link a library specified by a path to its file.

       The flag will be used before a library file path is given to the linker.  This  is  needed
       only on very few platforms.

   CMAKE_LINK_LIBRARY_FLAG
       Flag to be used to link a library into an executable.

       The  flag  will  be used to specify a library to link to an executable.  On most compilers
       this is -l.

   CMAKE_LINK_LIBRARY_USING_<FEATURE>
       New in version 3.24.

       This variable defines how to link a library or framework for the specified <FEATURE>  when
       a LINK_LIBRARY generator expression is used.  Both of the following conditions must be met
       for this variable to have any effect:

       • The associated CMAKE_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED  variable  must  be  set  to
         true.

       • There   is   no  language-specific  definition  for  the  same  <FEATURE>.   This  means
         CMAKE_<LANG>_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED cannot be true for the link language
         used by the target for which the LINK_LIBRARY generator expression is evaluated.

       Feature  names  are  case-sensitive and may only contain letters, numbers and underscores.
       Feature names defined in all uppercase are reserved for CMake's own built-in features (see
       Predefined Features further below).

   Feature Definitions
       A library feature definition is a list that contains one or three elements:

          [<PREFIX>] <LIBRARY_EXPRESSION> [<SUFFIX>]

       When  <PREFIX>  and <SUFFIX> are specified, they precede and follow respectively the whole
       list of libraries  specified  in  the  LINK_LIBRARY  expression,  not  each  library  item
       individually.   There  is  no  guarantee that the list of specified libraries will be kept
       grouped together though, so the <PREFIX> and <SUFFIX> may appear more  than  once  if  the
       library  list is reorganized by CMake to satisfy other constraints.  This means constructs
       like --start-group and --end-group, as supported by the GNU ld linker, cannot be  used  in
       this way.  The LINK_GROUP generator expression should be used instead for such constructs.

       <LIBRARY_EXPRESSION>  is  used  to  specify the pattern for constructing the corresponding
       fragment on the linker command line for each library.  The following placeholders  can  be
       used in the expression:

       • <LIBRARY>  is  expanded  to  the  full  path  to  the library for CMake targets, or to a
         platform-specific value based on the item otherwise (the same as <LINK_ITEM> on Windows,
         or the library base name for other platforms).

       • <LINK_ITEM>  is  expanded  to  how  the  library  would normally be linked on the linker
         command line.

       • <LIB_ITEM> is expanded to the full path to the library for CMake targets,  or  the  item
         itself exactly as specified in the <LIBRARY_EXPRESSION> otherwise.

       In  addition to the above, it is possible to have one pattern for paths (CMake targets and
       external libraries specified with file paths) and another for  other  items  specified  by
       name  only.  The PATH{} and NAME{} wrappers can be used to provide the expansion for those
       two cases, respectively.  When wrappers are used, both must be present.  For example:

          set(CMAKE_LINK_LIBRARY_USING_weak_library
              "PATH{-weak_library <LIBRARY>}NAME{LINKER:-weak-l<LIB_ITEM>}"
          )

       For all three elements of this variable (<PREFIX>,  <LIBRARY_EXPRESSION>,  and  <SUFFIX>),
       the LINKER: prefix can be used.

       To  pass options to the linker tool, each compiler driver has its own syntax.  The LINKER:
       prefix and , separator can be used to specify, in a portable way, options to pass  to  the
       linker tool. LINKER: is replaced by the appropriate driver option and , by the appropriate
       driver separator.  The driver prefix and driver separator are given by the values  of  the
       CMAKE_<LANG>_LINKER_WRAPPER_FLAG and CMAKE_<LANG>_LINKER_WRAPPER_FLAG_SEP variables.

       For  example, "LINKER:-z,defs" becomes -Xlinker -z -Xlinker defs for Clang and -Wl,-z,defs
       for GNU GCC.

       The LINKER: prefix can be specified as part of a SHELL: prefix expression.

       The LINKER: prefix supports, as an alternative syntax, specification  of  arguments  using
       the   SHELL:   prefix   and   space  as  separator.  The  previous  example  then  becomes
       "LINKER:SHELL:-z defs".

       NOTE:
          Specifying the SHELL: prefix anywhere other than at the beginning of the LINKER: prefix
          is not supported.

   Examples
   Loading a whole static library
       A  common need is to prevent the linker from discarding any symbols from a static library.
       Different linkers use different syntax for achieving this.  The  following  example  shows
       how this may be implemented for some linkers.  Note that this is for illustration purposes
       only.  Projects should use the built-in  WHOLE_ARCHIVE  feature  instead  (see  Predefined
       Features),  which  provides  a  more  complete  and  more  robust  implementation  of this
       functionality.

          set(CMAKE_C_LINK_LIBRARY_USING_load_archive_SUPPORTED TRUE)
          if(CMAKE_C_COMPILER_ID STREQUAL "AppleClang")
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive "-force_load <LIB_ITEM>")
          elseif(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive
              "LINKER:--push-state,--whole-archive"
              "<LINK_ITEM>"
              "LINKER:--pop-state"
            )
          elseif(CMAKE_C_COMPILER_ID STREQUAL "MSVC")
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive "/WHOLEARCHIVE:<LIBRARY>")
          else()
            # feature not yet supported for the other environments
            set(CMAKE_C_LINK_LIBRARY_USING_load_archive_SUPPORTED FALSE)
          endif()

          add_library(lib1 STATIC ...)
          add_library(lib2 SHARED ...)

          if(CMAKE_C_LINK_LIBRARY_USING_load_archive_SUPPORTED)
            # The -force_load Apple linker option requires a file name
            set(external_lib
              "$<IF:$<LINK_LANG_AND_ID:C,AppleClang>,libexternal.a,external>"
            )
            target_link_libraries(lib2 PRIVATE
              "$<LINK_LIBRARY:load_archive,lib1,${external_lib}>"
            )
          else()
            target_link_libraries(lib2 PRIVATE lib1 external)
          endif()

       CMake will generate the following link expressions:

       • AppleClang: -force_load /path/to/lib1.a -force_load libexternal.aGNU: -Wl,--push-state,--whole-archive /path/to/lib1.a -lexternal -Wl,--pop-stateMSVC: /WHOLEARCHIVE:/path/to/lib1.lib /WHOLEARCHIVE:external.lib

   Linking a library as weak
       On macOS, it is possible to link a library in weak mode (the library  and  all  references
       are marked as weak imports).  Different flags must be used for a library specified by file
       path compared to one specified by name.  This constraint can be solved  using  PATH{}  and
       NAME{}  wrappers.  Again, the following example shows how this may be implemented for some
       linkers, but it is for illustration purposes  only.   Projects  should  use  the  built-in
       WEAK_FRAMEWORK  or  WEAK_LIBRARY features instead (see Predefined Features), which provide
       more complete and more robust implementations of this functionality.

          if (CMAKE_C_COMPILER_ID STREQUAL "AppleClang")
            set(CMAKE_LINK_LIBRARY_USING_weak_library
                "PATH{-weak_library <LIBRARY>}NAME{LINKER:-weak-l<LIB_ITEM>}"
            )
            set(CMAKE_LINK_LIBRARY_USING_weak_library_SUPPORTED TRUE)
          endif()

          add_library(lib SHARED ...)
          add_executable(main ...)
          if(CMAKE_LINK_LIBRARY_USING_weak_library_SUPPORTED)
            target_link_libraries(main PRIVATE "$<LINK_LIBRARY:weak_library,lib,external>")
          else()
            target_link_libraries(main PRIVATE lib external)
          endif()

       CMake will generate the following linker command line fragment when linking main using the
       AppleClang toolchain:

       -weak_library /path/to/lib -Xlinker -weak-lexternal.

   Predefined Features
       The following built-in library features are pre-defined by CMake:

       DEFAULT
              This  feature  corresponds  to standard linking, essentially equivalent to using no
              feature at all.  It is typically  only  used  with  the  LINK_LIBRARY_OVERRIDE  and
              LINK_LIBRARY_OVERRIDE_<LIBRARY> target properties.

       WHOLE_ARCHIVE
              Force inclusion of all members of a static library.  This feature is only supported
              for the following platforms, with limitations as noted:

              • Linux.

              • All BSD variants.

              • SunOS.

              • All Apple variants.  The library must be specified as  a  CMake  target  name,  a
                library  file  name  (such  as  libfoo.a),  or  a  library  file  path  (such  as
                /path/to/libfoo.a).  Due to a limitation  of  the  Apple  linker,  it  cannot  be
                specified as a plain library name like foo, where foo is not a CMake target.

              • Windows.   When  using  a  MSVC  or MSVC-like toolchain, the MSVC version must be
                greater than 1900.

              • Cygwin.

              • MSYS.

       FRAMEWORK
              This option tells the linker to  search  for  the  specified  framework  using  the
              -framework  linker option.  It can only be used on Apple platforms, and only with a
              linker that understands the option used (i.e. the linker provided  with  Xcode,  or
              one compatible with it).

              The  framework can be specified as a CMake framework target, a bare framework name,
              or a file path.  If a target is given, that target must have the  FRAMEWORK  target
              property  set  to  true.   For  a  file path, if it contains a directory part, that
              directory will be added as a framework search path.

                 add_library(lib SHARED ...)
                 target_link_libraries(lib PRIVATE "$<LINK_LIBRARY:FRAMEWORK,/path/to/my_framework>")

                 # The constructed linker command line will contain:
                 #   -F/path/to -framework my_framework

              File paths must conform to one of the following patterns  (*  is  a  wildcard,  and
              optional parts are shown as [...]):

                 • [/path/to/]FwName[.framework][/path/to/]FwName.framework/FwName[suffix][/path/to/]FwName.framework/Versions/*/FwName[suffix]

              Note  that  CMake  recognizes  and  automatically  handles  framework targets, even
              without  using  the  $<LINK_LIBRARY:FRAMEWORK,...>   expression.    The   generator
              expression  can  still  be  used  with  a  CMake  target if the project wants to be
              explicit about it, but it is not required to do so.  The linker  command  line  may
              have  some differences between using the generator expression or not, but the final
              result should be the same.  On the other hand, if a file path is given, CMake  will
              recognize some paths automatically, but not all cases.  The project may want to use
              $<LINK_LIBRARY:FRAMEWORK,...> for file paths  so  that  the  expected  behavior  is
              clear.

              New in version 3.25: The FRAMEWORK_MULTI_CONFIG_POSTFIX_<CONFIG> target property as
              well as the suffix of the framework library name are now supported by the FRAMEWORK
              features.

       NEEDED_FRAMEWORK
              This  is similar to the FRAMEWORK feature, except it forces the linker to link with
              the framework even if no symbols are used from it.  It uses  the  -needed_framework
              option and has the same linker constraints as FRAMEWORK.

       REEXPORT_FRAMEWORK
              This  is  similar  to  the  FRAMEWORK  feature, except it tells the linker that the
              framework should be available to clients linking to the library being created.   It
              uses  the  -reexport_framework  option  and  has  the  same  linker  constraints as
              FRAMEWORK.

       WEAK_FRAMEWORK
              This is similar to the FRAMEWORK feature, except it forces the linker to  mark  the
              framework  and  all  references to it as weak imports.  It uses the -weak_framework
              option and has the same linker constraints as FRAMEWORK.

       NEEDED_LIBRARY
              This is similar to  the  NEEDED_FRAMEWORK  feature,  except  it  is  for  use  with
              non-framework   targets   or   libraries  (Apple  platforms  only).   It  uses  the
              -needed_library or -needed-l  option  as  appropriate,  and  has  the  same  linker
              constraints as NEEDED_FRAMEWORK.

       REEXPORT_LIBRARY
              This  is  similar  to  the  REEXPORT_FRAMEWORK  feature,  except it is for use with
              non-framework  targets  or  libraries  (Apple  platforms  only).    It   uses   the
              -reexport_library  or  -reexport-l  option  as appropriate, and has the same linker
              constraints as REEXPORT_FRAMEWORK.

       WEAK_LIBRARY
              This is  similar  to  the  WEAK_FRAMEWORK  feature,  except  it  is  for  use  with
              non-framework   targets   or   libraries  (Apple  platforms  only).   It  uses  the
              -weak_library or -weak-l option as appropriate, and has the same linker constraints
              as WEAK_FRAMEWORK.

   CMAKE_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED
       New in version 3.24.

       Set  to  TRUE if the <FEATURE>, as defined by variable CMAKE_LINK_LIBRARY_USING_<FEATURE>,
       is supported regardless the linker language.

       NOTE:
          This    variable    is    evaluated    if,    and     only     if,     the     variable
          CMAKE_<LANG>_LINK_LIBRARY_USING_<FEATURE>_SUPPORTED is not defined.

   CMAKE_LINK_WHAT_YOU_USE
       New in version 3.7.

       Default  value for LINK_WHAT_YOU_USE target property.  This variable is used to initialize
       the property on each target as it is created.

   CMAKE_LINK_WHAT_YOU_USE_CHECK
       New in version 3.22.

       Defines the command executed after the link step to check libraries usage.  This check  is
       currently only defined on ELF platforms with value ldd -u -r.

       See also CMAKE_<LANG>_LINK_WHAT_YOU_USE_FLAG variables.

   CMAKE_MACOSX_BUNDLE
       Default value for MACOSX_BUNDLE of targets.

       This  variable  is  used to initialize the MACOSX_BUNDLE property on all the targets.  See
       that target property for additional information.

       This variable is set to ON by default if CMAKE_SYSTEM_NAME equals to iOS, tvOS or watchOS.

   CMAKE_MACOSX_RPATH
       Whether to use rpaths on macOS and iOS.

       This variable is used to initialize the MACOSX_RPATH property on all targets.

   CMAKE_MAP_IMPORTED_CONFIG_<CONFIG>
       Default value for MAP_IMPORTED_CONFIG_<CONFIG> of targets.

       This variable is used to initialize the MAP_IMPORTED_CONFIG_<CONFIG> property on  all  the
       targets.  See that target property for additional information.

   CMAKE_MODULE_LINKER_FLAGS
       Linker flags to be used to create modules.

       These flags will be used by the linker when creating a module.

   CMAKE_MODULE_LINKER_FLAGS_<CONFIG>
       Flags to be used when linking a module.

       Same as CMAKE_C_FLAGS_* but used by the linker when creating modules.

   CMAKE_MODULE_LINKER_FLAGS_<CONFIG>_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_MODULE_LINKER_FLAGS_<CONFIG> cache entry the first time
       a build tree is configured.  This variable is meant to be set by a toolchain file.   CMake
       may prepend or append content to the value based on the environment and target platform.

       See also CMAKE_MODULE_LINKER_FLAGS_INIT.

   CMAKE_MODULE_LINKER_FLAGS_INIT
       New in version 3.7.

       Value  used to initialize the CMAKE_MODULE_LINKER_FLAGS cache entry the first time a build
       tree is configured.  This variable is meant to be set by  a  toolchain  file.   CMake  may
       prepend or append content to the value based on the environment and target platform.

       See also the configuration-specific variable CMAKE_MODULE_LINKER_FLAGS_<CONFIG>_INIT.

   CMAKE_MSVC_DEBUG_INFORMATION_FORMAT
       New in version 3.25.

       Select the MSVC debug information format targeting the MSVC ABI.  This variable is used to
       initialize the MSVC_DEBUG_INFORMATION_FORMAT property on all targets as they are  created.
       It is also propagated by calls to the try_compile() command into the test project.

       The allowed values are:

       Embedded
              Compile  with  -Z7 or equivalent flag(s) to produce object files with full symbolic
              debugging information.

       ProgramDatabase
              Compile with -Zi or equivalent flag(s) to produce a program database that  contains
              all the symbolic debugging information.

       EditAndContinue
              Compile  with -ZI or equivalent flag(s) to produce a program database that supports
              the Edit and Continue feature.

       The value is ignored on compilers not targeting the MSVC ABI,  but  an  unsupported  value
       will be rejected as an error when using a compiler targeting the MSVC ABI.

       The  value  may  also  be the empty string (""), in which case no debug information format
       flag will be added explicitly by CMake.

       Use generator expressions to support per-configuration specification.   For  example,  the
       code:

          set(CMAKE_MSVC_DEBUG_INFORMATION_FORMAT "$<$<CONFIG:Debug,RelWithDebInfo>:ProgramDatabase>")

       selects  for  all  following targets the program database debug information format for the
       Debug configuration.

       If this variable is not set, the MSVC_DEBUG_INFORMATION_FORMAT target property will not be
       set  automatically.  If that property is not set, CMake selects a debug information format
       using the default value $<$<CONFIG:Debug,RelWithDebInfo>:ProgramDatabase>, if supported by
       the compiler, and otherwise $<$<CONFIG:Debug,RelWithDebInfo>:Embedded>.

       NOTE:
          This  variable  has  effect  only  when policy CMP0141 is set to NEW prior to the first
          project() or enable_language()  command  that  enables  a  language  using  a  compiler
          targeting the MSVC ABI.

   CMAKE_MSVC_RUNTIME_LIBRARY
       New in version 3.15.

       Select  the  MSVC  runtime  library  for  use  by  compilers targeting the MSVC ABI.  This
       variable is used to initialize the MSVC_RUNTIME_LIBRARY property on all  targets  as  they
       are  created.   It  is also propagated by calls to the try_compile() command into the test
       project.

       The allowed values are:

       MultiThreaded
              Compile with -MT or equivalent flag(s) to use  a  multi-threaded  statically-linked
              runtime library.

       MultiThreadedDLL
              Compile  with  -MD or equivalent flag(s) to use a multi-threaded dynamically-linked
              runtime library.

       MultiThreadedDebug
              Compile with -MTd or equivalent flag(s) to use a  multi-threaded  statically-linked
              runtime library.

       MultiThreadedDebugDLL
              Compile  with -MDd or equivalent flag(s) to use a multi-threaded dynamically-linked
              runtime library.

       The value is ignored on compilers not targeting the MSVC ABI,  but  an  unsupported  value
       will be rejected as an error when using a compiler targeting the MSVC ABI.

       The  value  may  also  be the empty string ("") in which case no runtime library selection
       flag will be added explicitly by CMake.  Note  that  with  Visual  Studio  Generators  the
       native build system may choose to add its own default runtime library selection flag.

       Use  generator  expressions  to support per-configuration specification.  For example, the
       code:

          set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>")

       selects for all following targets a multi-threaded statically-linked runtime library  with
       or without debug information depending on the configuration.

       If  this variable is not set then the MSVC_RUNTIME_LIBRARY target property will not be set
       automatically.   If  that  property  is  not  set  then  CMake  uses  the  default   value
       MultiThreaded$<$<CONFIG:Debug>:Debug>DLL to select a MSVC runtime library.

       NOTE:
          This  variable  has  effect  only  when policy CMP0091 is set to NEW prior to the first
          project() or enable_language()  command  that  enables  a  language  using  a  compiler
          targeting the MSVC ABI.

   CMAKE_MSVCIDE_RUN_PATH
       New in version 3.10.

       Extra   PATH  locations  that  should  be  used  when  executing  add_custom_command()  or
       add_custom_target() when using the Visual Studio 9 2008 (or above) generator. This  allows
       for running commands and using dll's that the IDE environment is not aware of.

       If  not  set explicitly the value is initialized by the CMAKE_MSVCIDE_RUN_PATH environment
       variable, if set, and otherwise left empty.

   CMAKE_NINJA_OUTPUT_PATH_PREFIX
       New in version 3.6.

       Tell the Ninja Generators to add a prefix to every output path in build.ninja.  A trailing
       slash is appended to the prefix, if missing.

       This  is  useful  when the generated ninja file is meant to be embedded as a subninja file
       into a super ninja project.  For example, the command:

          cd super-build-dir &&
          cmake -G Ninja -S /path/to/src -B sub -DCMAKE_NINJA_OUTPUT_PATH_PREFIX=sub/
          #                                 ^^^---------- these match -----------^^^

       generates a build directory with its top-level (CMAKE_BINARY_DIR) in  super-build-dir/sub.
       The  path  to  the build directory ends in the output path prefix.  This makes it suitable
       for use in a separately-written super-build-dir/build.ninja file  with  a  directive  like
       this:

          subninja sub/build.ninja

       The   auto-regeneration  rule  in  super-build-dir/build.ninja  must  have  an  order-only
       dependency on sub/build.ninja.

       New in version 3.27: The Ninja Multi-Config generator supports this variable.

       NOTE:
          When CMAKE_NINJA_OUTPUT_PATH_PREFIX is set, the project generated by  CMake  cannot  be
          used as a standalone project.  No default targets are specified.

          The  value  of CMAKE_NINJA_OUTPUT_PATH_PREFIX must match one or more path components at
          the end of CMAKE_BINARY_DIR, or the behavior is undefined.  However,  this  requirement
          is not checked automatically.

   CMAKE_NO_BUILTIN_CHRPATH
       Do not use the builtin binary editor to fix runtime library search paths on installation.

       When  an  ELF  or XCOFF binary needs to have a different runtime library search path after
       installation than it does in the build tree, CMake uses a builtin  editor  to  change  the
       runtime  search  path  in  the installed copy.  If this variable is set to true then CMake
       will relink the binary before installation instead of using its builtin editor.

       For more information on RPATH  handling  see  the  INSTALL_RPATH  and  BUILD_RPATH  target
       properties.

       New  in version 3.20: This variable also applies to XCOFF binaries' LIBPATH.  Prior to the
       addition of the XCOFF editor in CMake 3.20, this variable applied only  to  ELF  binaries'
       RPATH/RUNPATH.

   CMAKE_NO_SYSTEM_FROM_IMPORTED
       Default value for NO_SYSTEM_FROM_IMPORTED of targets.

       This  variable  is  used  to  initialize  the  NO_SYSTEM_FROM_IMPORTED property on all the
       targets.  See that target property for additional information.

   CMAKE_OPTIMIZE_DEPENDENCIES
       New in version 3.19.

       Initializes the OPTIMIZE_DEPENDENCIES target property.

   CMAKE_OSX_ARCHITECTURES
       Target specific architectures for macOS and iOS.

       This variable is used to initialize the OSX_ARCHITECTURES property on each target as it is
       created.  See that target property for additional information.

       The value of this variable should be set prior to the first project() or enable_language()
       command invocation because it may influence configuration of the toolchain and flags.   It
       is  intended to be set locally by the user creating a build tree.  This variable should be
       set as a CACHE entry (or else CMake may remove it while initializing a cache entry of  the
       same name) unless policy CMP0126 is set to NEW.

       Despite the OSX part in the variable name(s) they apply also to other SDKs than macOS like
       iOS, tvOS, or watchOS.

       This variable is ignored on platforms other than Apple.

   CMAKE_OSX_DEPLOYMENT_TARGET
       Specify the minimum version of the target platform (e.g. macOS or iOS) on which the target
       binaries  are to be deployed.  CMake uses this variable value for the -mmacosx-version-min
       flag or their respective target platform  equivalents.   For  older  Xcode  versions  that
       shipped  multiple  macOS  SDKs  this  variable  also  helps  to  choose  the  SDK  in case
       CMAKE_OSX_SYSROOT is unset.

       If not set explicitly the value is initialized by the MACOSX_DEPLOYMENT_TARGET environment
       variable, if set, and otherwise computed based on the host platform.

       The value of this variable should be set prior to the first project() or enable_language()
       command invocation because it may influence configuration of the toolchain and flags.   It
       is  intended to be set locally by the user creating a build tree.  This variable should be
       set as a CACHE entry (or else CMake may remove it while initializing a cache entry of  the
       same name) unless policy CMP0126 is set to NEW.

       Despite the OSX part in the variable name(s) they apply also to other SDKs than macOS like
       iOS, tvOS, or watchOS.

       This variable is ignored on platforms other than Apple.

   CMAKE_OSX_SYSROOT
       Specify the location or name of the macOS platform SDK to be used.  CMake uses this  value
       to  compute  the value of the -isysroot flag or equivalent and to help the find_* commands
       locate files in the SDK.

       If not set explicitly the value is initialized by the  SDKROOT  environment  variable,  if
       set, and otherwise computed based on the CMAKE_OSX_DEPLOYMENT_TARGET or the host platform.

       The value of this variable should be set prior to the first project() or enable_language()
       command invocation because it may influence configuration of the toolchain and flags.   It
       is  intended to be set locally by the user creating a build tree.  This variable should be
       set as a CACHE entry (or else CMake may remove it while initializing a cache entry of  the
       same name) unless policy CMP0126 is set to NEW.

       Despite the OSX part in the variable name(s) they apply also to other SDKs than macOS like
       iOS, tvOS, or watchOS.

       This variable is ignored on platforms other than Apple.

   CMAKE_PCH_INSTANTIATE_TEMPLATES
       New in version 3.19.

       This variable is used to initialize the PCH_INSTANTIATE_TEMPLATES property of targets when
       they are created.

   CMAKE_PCH_WARN_INVALID
       New in version 3.18.

       This variable is used to initialize the PCH_WARN_INVALID property of targets when they are
       created.

   CMAKE_PDB_OUTPUT_DIRECTORY
       Output directory for MS debug symbol .pdb files generated by the linker for executable and
       shared library targets.

       This  variable is used to initialize the PDB_OUTPUT_DIRECTORY property on all the targets.
       See that target property for additional information.

   CMAKE_PDB_OUTPUT_DIRECTORY_<CONFIG>
       Per-configuration output directory for MS debug symbol .pdb files generated by the  linker
       for executable and shared library targets.

       This  is a per-configuration version of CMAKE_PDB_OUTPUT_DIRECTORY.  This variable is used
       to initialize the PDB_OUTPUT_DIRECTORY_<CONFIG> property on all  the  targets.   See  that
       target property for additional information.

   CMAKE_PLATFORM_NO_VERSIONED_SONAME
       New in version 3.1.

       This  variable  is  used  to  globally  control  whether  the VERSION and SOVERSION target
       properties should be used  for  shared  libraries.   When  set  to  true,  adding  version
       information to each shared library target is disabled.

       By  default  this  variable  is set only on platforms where CMake knows it is needed.   On
       other platforms, the specified properties will be used for shared libraries.

   CMAKE_POSITION_INDEPENDENT_CODE
       Default value for POSITION_INDEPENDENT_CODE of targets.

       This variable is used to initialize the  POSITION_INDEPENDENT_CODE  property  on  all  the
       targets.   See that target property for additional information.  If set, its value is also
       used by the try_compile() command.

   CMAKE_RUNTIME_OUTPUT_DIRECTORY
       Where to put all the RUNTIME target files when built.

       This variable is used to initialize  the  RUNTIME_OUTPUT_DIRECTORY  property  on  all  the
       targets.  See that target property for additional information.

   CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
       New in version 3.3.

       Where to put all the RUNTIME target files when built for a specific configuration.

       This  variable is used to initialize the RUNTIME_OUTPUT_DIRECTORY_<CONFIG> property on all
       the targets.  See that target property for additional information.

   CMAKE_SHARED_LIBRARY_ENABLE_EXPORTS
       New in version 3.27.

       Specify whether shared library generates an import file.

       This variable is used to initialize the ENABLE_EXPORTS target property for shared  library
       targets  when  they  are  created by calls to the add_library() command.  See the property
       documentation for details.

   CMAKE_SHARED_LINKER_FLAGS
       Linker flags to be used to create shared libraries.

       These flags will be used by the linker when creating a shared library.

   CMAKE_SHARED_LINKER_FLAGS_<CONFIG>
       Flags to be used when linking a shared library.

       Same as CMAKE_C_FLAGS_* but used by the linker when creating shared libraries.

   CMAKE_SHARED_LINKER_FLAGS_<CONFIG>_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_SHARED_LINKER_FLAGS_<CONFIG> cache entry the first time
       a  build tree is configured.  This variable is meant to be set by a toolchain file.  CMake
       may prepend or append content to the value based on the environment and target platform.

       See also CMAKE_SHARED_LINKER_FLAGS_INIT.

   CMAKE_SHARED_LINKER_FLAGS_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_SHARED_LINKER_FLAGS cache entry the first time a  build
       tree  is  configured.   This  variable  is meant to be set by a toolchain file.  CMake may
       prepend or append content to the value based on the environment and target platform.

       See also the configuration-specific variable CMAKE_SHARED_LINKER_FLAGS_<CONFIG>_INIT.

   CMAKE_SKIP_BUILD_RPATH
       Do not include RPATHs in the build tree.

       Normally CMake uses the build tree for the RPATH when building executables etc on  systems
       that  use RPATH.  When the software is installed the executables etc are relinked by CMake
       to have the install RPATH.  If this variable is set to TRUE then the  software  is  always
       built with no RPATH.

       This  is used to initialize the SKIP_BUILD_RPATH target property for all targets. For more
       information on RPATH handling see the INSTALL_RPATH and BUILD_RPATH target properties.

       See also the CMAKE_SKIP_INSTALL_RPATH variable.  To omit  RPATH  in  both  the  build  and
       install steps, use CMAKE_SKIP_RPATH instead.

   CMAKE_SKIP_INSTALL_RPATH
       Do not include RPATHs in the install tree.

       Normally  CMake uses the build tree for the RPATH when building executables etc on systems
       that use RPATH.  When the software is installed the executables etc are relinked by  CMake
       to  have  the  install RPATH.  If this variable is set to true then the software is always
       installed without RPATH, even if RPATH is enabled when building.  This can be  useful  for
       example  to  allow  running  tests  from the build directory with RPATH enabled before the
       installation step.

       See also the CMAKE_SKIP_BUILD_RPATH variable.  To omit RPATH in both the build and install
       steps, use CMAKE_SKIP_RPATH instead.

       For  more  information  on  RPATH  handling  see  the INSTALL_RPATH and BUILD_RPATH target
       properties.

   CMAKE_STATIC_LINKER_FLAGS
       Flags to be used to create static libraries.  These flags will be passed to  the  archiver
       when creating a static library.

       See also CMAKE_STATIC_LINKER_FLAGS_<CONFIG>.

       NOTE:
          Static  libraries do not actually link.  They are essentially archives of object files.
          The use of the name "linker" in the name of this variable is kept for compatibility.

   CMAKE_STATIC_LINKER_FLAGS_<CONFIG>
       Flags to be used to create static libraries.  These flags will be passed to  the  archiver
       when creating a static library in the <CONFIG> configuration.

       See also CMAKE_STATIC_LINKER_FLAGS.

       NOTE:
          Static  libraries do not actually link.  They are essentially archives of object files.
          The use of the name "linker" in the name of this variable is kept for compatibility.

   CMAKE_STATIC_LINKER_FLAGS_<CONFIG>_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_STATIC_LINKER_FLAGS_<CONFIG> cache entry the first time
       a  build tree is configured.  This variable is meant to be set by a toolchain file.  CMake
       may prepend or append content to the value based on the environment and target platform.

       See also CMAKE_STATIC_LINKER_FLAGS_INIT.

   CMAKE_STATIC_LINKER_FLAGS_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_STATIC_LINKER_FLAGS cache entry the first time a  build
       tree  is  configured.   This  variable  is meant to be set by a toolchain file.  CMake may
       prepend or append content to the value based on the environment and target platform.

       See also the configuration-specific variable CMAKE_STATIC_LINKER_FLAGS_<CONFIG>_INIT.

   CMAKE_TASKING_TOOLSET
       New in version 3.25.

       Select the Tasking toolset which provides the compiler

       Architecture compilers are provided by different toolchains with  incompatible  versioning
       schemes.   Set this variable in a toolchain file so CMake can detect the compiler features
       correctly. If no toolset is specified, Standalone is assumed.

       Due   to    the    different    versioning    schemes,    the    compiler    version    (‐
       CMAKE_<LANG>_COMPILER_VERSION) depends on the toolset and architecture in use. If projects
       can be built with multiple toolsets or architectures, the specified  CMAKE_TASKING_TOOLSET
       and  the automatically determined CMAKE_<LANG>_COMPILER_ARCHITECTURE_ID must be taken into
       account when comparing against the CMAKE_<LANG>_COMPILER_VERSION.

       TriCore
              Compilers are provided by the TriCore toolset.

       SmartCode
              Compilers are provided by the SmartCode toolset.

       Standalone
              Compilers are provided by the standalone toolsets.

              NOTE:
                 For the TriCore architecture, the compiler from the TriCore toolset is  selected
                 as standalone compiler.

   CMAKE_TRY_COMPILE_CONFIGURATION
       Build configuration used for try_compile() and try_run() projects.

       Projects  built  by  try_compile()  and try_run() are built synchronously during the CMake
       configuration step.  Therefore a specific build configuration must be chosen even  if  the
       generated build system supports multiple configurations.

   CMAKE_TRY_COMPILE_NO_PLATFORM_VARIABLES
       New in version 3.24.

       Set  to  a  true  value  to  tell  the try_compile() command not to propagate any platform
       variables into the test project.

       The try_compile() command normally passes some CMake variables that configure the platform
       and  toolchain behavior into test projects.  See policy CMP0137.  This variable may be set
       to disable that behavior.

   CMAKE_TRY_COMPILE_PLATFORM_VARIABLES
       New in version 3.6.

       List of variables that the try_compile() command source file signature must propagate into
       the test project in order to target the same platform as the host project.

       This  variable  should  not  be  set  by  project  code.  It is meant to be set by CMake's
       platform information modules for the current toolchain, or by a toolchain file  when  used
       with CMAKE_TOOLCHAIN_FILE.

       Variables  meaningful  to CMake, such as CMAKE_<LANG>_FLAGS, are propagated automatically.
       The CMAKE_TRY_COMPILE_PLATFORM_VARIABLES variable may be  set  to  pass  custom  variables
       meaningful to a toolchain file.  For example, a toolchain file may contain:

          set(CMAKE_SYSTEM_NAME ...)
          set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES MY_CUSTOM_VARIABLE)
          # ... use MY_CUSTOM_VARIABLE ...

       If  a  user  passes -DMY_CUSTOM_VARIABLE=SomeValue to CMake then this setting will be made
       visible to the toolchain file both for the main project and for test projects generated by
       the try_compile() command source file signature.

       Changed   in   version   3.24:  Listed  variables  are  propagated  to  the  try_compile()
       whole-project signature too.  See CMP0137.

       New in version 3.24: The CMAKE_TRY_COMPILE_NO_PLATFORM_VARIABLES variable may  be  set  to
       disable passing platform variables into the test project.

   CMAKE_TRY_COMPILE_TARGET_TYPE
       New in version 3.6.

       Type  of  target generated for try_compile() calls using the source file signature.  Valid
       values are:

       EXECUTABLE
              Use add_executable() to name the source file in the generated project.  This is the
              default if no value is given.

       STATIC_LIBRARY
              Use  add_library()  with the STATIC option to name the source file in the generated
              project.   This  avoids  running  the  linker  and  is  intended   for   use   with
              cross-compiling toolchains that cannot link without custom flags or linker scripts.

   CMAKE_UNITY_BUILD
       New in version 3.16.

       This  variable  is  used  to  initialize the UNITY_BUILD property of targets when they are
       created.  Setting it to true enables batch compilation of  multiple  sources  within  each
       target.  This feature is known as a Unity or Jumbo build.

       Projects  should not set this variable, it is intended as a developer control to be set on
       the cmake(1) command line or other  equivalent  methods.   The  developer  must  have  the
       ability  to  enable  or  disable  unity  builds according to the capabilities of their own
       machine and compiler.

       By default, this variable is not set, which will result in unity builds being disabled.

       NOTE:
          This   option   currently   does   not   work   well   in    combination    with    the
          CMAKE_EXPORT_COMPILE_COMMANDS variable.

   CMAKE_UNITY_BUILD_BATCH_SIZE
       New in version 3.16.

       This  variable  is  used to initialize the UNITY_BUILD_BATCH_SIZE property of targets when
       they are created.  It specifies the default upper limit on the number of source files that
       may be combined in any one unity source file when unity builds are enabled for a target.

   CMAKE_UNITY_BUILD_UNIQUE_ID
       New in version 3.20.

       This  variable  is  used  to initialize the UNITY_BUILD_UNIQUE_ID property of targets when
       they are created.  It specifies the name of the unique identifier generated per file in  a
       unity build.

   CMAKE_USE_RELATIVE_PATHS
       This variable has no effect.  The partially implemented effect it had in previous releases
       was removed in CMake 3.4.

   CMAKE_VERIFY_INTERFACE_HEADER_SETS
       New in version 3.24.

       This variable is used to initialize the VERIFY_INTERFACE_HEADER_SETS property  of  targets
       when they are created.  Setting it to true enables header set verification.

       Projects  should  not normally set this variable, it is intended as a developer control to
       be set on the cmake(1) command line or other equivalent methods.  The developer must  have
       the  ability to enable or disable header set verification according to the capabilities of
       their own machine and compiler.

       Verification of a dependency's header sets is not typically  of  interest  to  developers.
       Therefore, FetchContent_MakeAvailable() explicitly sets CMAKE_VERIFY_INTERFACE_HEADER_SETS
       to false for the duration of its call, but restores its original value  before  returning.
       If   a   project   brings  a  dependency  directly  into  the  main  build  (e.g.  calling
       add_subdirectory() on a vendored  project  from  a  git  submodule),  it  should  also  do
       likewise.  For example:

          # Save original setting so we can restore it later
          set(want_header_set_verification ${CMAKE_VERIFY_INTERFACE_HEADER_SETS})

          # Include the vendored dependency with header set verification disabled
          set(CMAKE_VERIFY_INTERFACE_HEADER_SETS OFF)
          add_subdirectory(...)   # Vendored sources, e.g. from git submodules

          # Add the project's own sources. Restore the developer's original choice
          # for whether to enable header set verification.
          set(CMAKE_VERIFY_INTERFACE_HEADER_SETS ${want_header_set_verification})
          add_subdirectory(src)

       By  default,  this variable is not set, which will result in header set verification being
       disabled.

   CMAKE_VISIBILITY_INLINES_HIDDEN
       Default value for the VISIBILITY_INLINES_HIDDEN target property when a target is created.

   CMAKE_VS_DEBUGGER_COMMAND
       New in version 3.27.

       This variable is used to initialize the VS_DEBUGGER_COMMAND property on each target as  it
       is created.  See that target property for additional information.

   CMAKE_VS_DEBUGGER_COMMAND_ARGUMENTS
       New in version 3.27.

       This  variable  is  used  to initialize the VS_DEBUGGER_COMMAND_ARGUMENTS property on each
       target as it is created.  See that target property for additional information.

   CMAKE_VS_DEBUGGER_ENVIRONMENT
       New in version 3.27.

       This variable is used to initialize the VS_DEBUGGER_ENVIRONMENT property on each target as
       it is created.  See that target property for additional information.

   CMAKE_VS_DEBUGGER_WORKING_DIRECTORY
       New in version 3.27.

       This  variable  is  used  to initialize the VS_DEBUGGER_WORKING_DIRECTORY property on each
       target as it is created.  See that target property for additional information.

   CMAKE_VS_GLOBALS
       New in version 3.13.

       List of Key=Value records to be set per target as target  properties  VS_GLOBAL_<variable>
       with variable=Key and value Value.

       For example:

          set(CMAKE_VS_GLOBALS
            "DefaultLanguage=en-US"
            "MinimumVisualStudioVersion=14.0"
            )

       will       set       properties      VS_GLOBAL_DefaultLanguage      to      en-US      and
       VS_GLOBAL_MinimumVisualStudioVersion  to  14.0  for  all  targets  (except  for  INTERFACE
       libraries).

       This variable is meant to be set by a toolchain file.

   CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD
       New in version 3.3.

       Include INSTALL target to default build.

       In  Visual  Studio solution, by default the INSTALL target will not be part of the default
       build. Setting this variable will enable the INSTALL target to  be  part  of  the  default
       build.

   CMAKE_VS_INCLUDE_PACKAGE_TO_DEFAULT_BUILD
       New in version 3.8.

       Include PACKAGE target to default build.

       In  Visual  Studio solution, by default the PACKAGE target will not be part of the default
       build. Setting this variable will enable the PACKAGE target to  be  part  of  the  default
       build.

   CMAKE_VS_JUST_MY_CODE_DEBUGGING
       New in version 3.15.

       Enable Just My Code with Visual Studio debugger.

       This  variable is used to initialize the VS_JUST_MY_CODE_DEBUGGING property on all targets
       when they are created.  See that target property for additional information.

   CMAKE_VS_NO_COMPILE_BATCHING
       New in version 3.24.

       Turn off compile batching when using Visual Studio Generators.

       This variable is used to initialize the VS_NO_COMPILE_BATCHING  property  on  all  targets
       when they are created.  See that target property for additional information.

   Example
       This shows setting the property for the target foo using the variable.

          set(CMAKE_VS_NO_COMPILE_BATCHING ON)
          add_library(foo SHARED foo.cpp)

   CMAKE_VS_SDK_EXCLUDE_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Exclude Directories.

   CMAKE_VS_SDK_EXECUTABLE_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Executable Directories.

   CMAKE_VS_SDK_INCLUDE_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Include Directories.

   CMAKE_VS_SDK_LIBRARY_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Library Directories.

   CMAKE_VS_SDK_LIBRARY_WINRT_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Library WinRT Directories.

   CMAKE_VS_SDK_REFERENCE_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Reference Directories.

   CMAKE_VS_SDK_SOURCE_DIRECTORIES
       New in version 3.12.

       This variable allows to override Visual Studio default Source Directories.

   CMAKE_VS_WINRT_BY_DEFAULT
       New in version 3.13.

       Inform  Visual  Studio  Generators  for VS 2010 and above that the target platform enables
       WinRT  compilation  by  default  and  it  needs  to  be  explicitly  disabled  if  /ZW  or
       VS_WINRT_COMPONENT  is  omitted (as opposed to enabling it when either of those options is
       present)

       This makes cmake configuration consistent in terms of WinRT among platforms - if  you  did
       not  enable  the WinRT compilation explicitly, it will be disabled (by either not enabling
       it or explicitly disabling it)

       Note: WinRT compilation is always explicitly disabled for C language source files, even if
       it is expliclty enabled for a project

       This variable is meant to be set by a toolchain file for such platforms.

   CMAKE_WATCOM_RUNTIME_LIBRARY
       New in version 3.24.

       Select  the  Watcom  runtime  library for use by compilers targeting the Watcom ABI.  This
       variable is used to initialize the WATCOM_RUNTIME_LIBRARY property on all targets as  they
       are  created.   It  is also propagated by calls to the try_compile() command into the test
       project.

       The allowed values are:

       SingleThreaded
              Compile without additional flags to use a single-threaded statically-linked runtime
              library.

       SingleThreadedDLL
              Compile  with -br or equivalent flag(s) to use a single-threaded dynamically-linked
              runtime library. This is not available for Linux targets.

       MultiThreaded
              Compile with -bm or equivalent flag(s) to use  a  multi-threaded  statically-linked
              runtime library.

       MultiThreadedDLL
              Compile   with   -bm   -br   or   equivalent   flag(s)   to  use  a  multi-threaded
              dynamically-linked runtime library. This is not available for Linux targets.

       The value is ignored on non-Watcom compilers but an unsupported value will be rejected  as
       an error when using a compiler targeting the Watcom ABI.

       The  value  may  also  be the empty string ("") in which case no runtime library selection
       flag will be added explicitly by CMake.

       Use generator expressions to support per-configuration specification.

       For example, the code:

          set(CMAKE_WATCOM_RUNTIME_LIBRARY "MultiThreaded")

       selects for all following targets a multi-threaded statically-linked runtime library.

       If this variable is not set then the WATCOM_RUNTIME_LIBRARY target property  will  not  be
       set  automatically.   If  that  property  is  not  set  then  CMake uses the default value
       MultiThreadedDLL on Windows and SingleThreaded on  other  platforms  to  select  a  Watcom
       runtime library.

       NOTE:
          This  variable  has  effect  only  when policy CMP0136 is set to NEW prior to the first
          project() or enable_language()  command  that  enables  a  language  using  a  compiler
          targeting the Watcom ABI.

   CMAKE_WIN32_EXECUTABLE
       Default value for WIN32_EXECUTABLE of targets.

       This variable is used to initialize the WIN32_EXECUTABLE property on all the targets.  See
       that target property for additional information.

   CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS
       New in version 3.4.

       Default value for WINDOWS_EXPORT_ALL_SYMBOLS target property.  This variable  is  used  to
       initialize the property on each target as it is created.

   CMAKE_XCODE_ATTRIBUTE_<an-attribute>
       New in version 3.1.

       Set Xcode target attributes directly.

       Tell  the  Xcode  generator  to set <an-attribute> to a given value in the generated Xcode
       project.  Ignored on other generators.

       This offers low-level control over the generated Xcode project file.  It  is  meant  as  a
       last  resort  for specifying settings that CMake does not otherwise have a way to control.
       Although this can override a setting CMake normally produces on its own, doing so bypasses
       CMake's model of the project and can break things.

       See  the  XCODE_ATTRIBUTE_<an-attribute>  target  property to set attributes on a specific
       target.

       Contents of CMAKE_XCODE_ATTRIBUTE_<an-attribute> may use "generator expressions" with  the
       syntax  $<...>.   See the cmake-generator-expressions(7) manual for available expressions.
       See the cmake-buildsystem(7) manual for more on defining buildsystem properties.

   EXECUTABLE_OUTPUT_PATH
       Old executable location variable.

       The target property RUNTIME_OUTPUT_DIRECTORY supersedes this variable for a target  if  it
       is set.  Executable targets are otherwise placed in this directory.

   LIBRARY_OUTPUT_PATH
       Old library location variable.

       The    target    properties    ARCHIVE_OUTPUT_DIRECTORY,   LIBRARY_OUTPUT_DIRECTORY,   and
       RUNTIME_OUTPUT_DIRECTORY supersede this variable for a target if they  are  set.   Library
       targets are otherwise placed in this directory.

VARIABLES FOR LANGUAGES

   CMAKE_C_COMPILE_FEATURES
       New in version 3.1.

       List of features known to the C compiler

       These  features  are  known  to  be  available for use with the C compiler. This list is a
       subset of the features listed in the CMAKE_C_KNOWN_FEATURES global property.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_C_EXTENSIONS
       New in version 3.1.

       Default value for C_EXTENSIONS target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_C_STANDARD
       New in version 3.1.

       Default value for C_STANDARD target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_C_STANDARD_REQUIRED
       New in version 3.1.

       Default value for C_STANDARD_REQUIRED target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_COMPILER_IS_GNUCC
       True if the C compiler is GNU.

       This variable is deprecated.  Use CMAKE_C_COMPILER_ID instead.

   CMAKE_COMPILER_IS_GNUCXX
       True if the C++ (CXX) compiler is GNU.

       This variable is deprecated.  Use CMAKE_CXX_COMPILER_ID instead.

   CMAKE_COMPILER_IS_GNUG77
       True if the Fortran compiler is GNU.

       This variable is deprecated.  Use CMAKE_Fortran_COMPILER_ID instead.

   CMAKE_CUDA_ARCHITECTURES
       New in version 3.18.

       Default value for CUDA_ARCHITECTURES property of targets.

       Initialized by the CUDAARCHS environment variable if set.  Otherwise as follows  depending
       on CMAKE_CUDA_COMPILER_ID:

       • For Clang: the oldest architecture that works.

       • For NVIDIA: the default architecture chosen by the compiler.  See policy CMP0104.

       Users are encouraged to override this, as the default varies across compilers and compiler
       versions.

       This variable is used to initialize the CUDA_ARCHITECTURES property on  all  targets.  See
       the target property for additional information.

   Examples
          cmake_minimum_required(VERSION)

          if(NOT DEFINED CMAKE_CUDA_ARCHITECTURES)
            set(CMAKE_CUDA_ARCHITECTURES 75)
          endif()

          project(example LANGUAGES CUDA)

       CMAKE_CUDA_ARCHITECTURES will default to 75 unless overridden by the user.

   CMAKE_CUDA_COMPILE_FEATURES
       New in version 3.17.

       List of features known to the CUDA compiler

       These  features  are  known to be available for use with the CUDA compiler. This list is a
       subset of the features listed in the CMAKE_CUDA_KNOWN_FEATURES global property.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CUDA_EXTENSIONS
       New in version 3.8.

       Default value for CUDA_EXTENSIONS target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CUDA_HOST_COMPILER
       New in version 3.10.

       When CMAKE_CUDA_COMPILER_ID  is  NVIDIA,  CMAKE_CUDA_HOST_COMPILER  selects  the  compiler
       executable to use when compiling host code for CUDA language files.  This maps to the nvcc
       -ccbin option.

       The CMAKE_CUDA_HOST_COMPILER variable may be set explicitly before CUDA is  first  enabled
       by    a    project()    or    enable_language()   command.    This   can   be   done   via
       -DCMAKE_CUDA_HOST_COMPILER=... on the command line or in a toolchain file.   Or,  one  may
       set the CUDAHOSTCXX environment variable to provide a default value.

       Once  the CUDA language is enabled, the CMAKE_CUDA_HOST_COMPILER variable is read-only and
       changes to it are undefined behavior.

       NOTE:
          Since CMAKE_CUDA_HOST_COMPILER is meaningful only when  the  CMAKE_CUDA_COMPILER_ID  is
          NVIDIA,  it  does  not  make sense to set CMAKE_CUDA_HOST_COMPILER without also setting
          CMAKE_CUDA_COMPILER to NVCC.

       NOTE:
          Ignored when using Visual Studio Generators.

   CMAKE_CUDA_STANDARD
       New in version 3.8.

       Default value for CUDA_STANDARD target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CUDA_STANDARD_REQUIRED
       New in version 3.8.

       Default value for CUDA_STANDARD_REQUIRED target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CUDA_TOOLKIT_INCLUDE_DIRECTORIES
       New in version 3.8.

       When the CUDA language has been enabled,  this  provides  a  semicolon-separated  list  of
       include  directories provided by the CUDA Toolkit.  The value may be useful for C++ source
       files to include CUDA headers.

   CMAKE_CXX_COMPILE_FEATURES
       New in version 3.1.

       List of features known to the C++ compiler

       These features are known to be available for use with the C++ compiler.  This  list  is  a
       subset of the features listed in the CMAKE_CXX_KNOWN_FEATURES global property.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CXX_EXTENSIONS
       New in version 3.1.

       Default value for CXX_EXTENSIONS target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CXX_STANDARD
       New in version 3.1.

       Default value for CXX_STANDARD target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_CXX_STANDARD_REQUIRED
       New in version 3.1.

       Default value for CXX_STANDARD_REQUIRED target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_Fortran_MODDIR_DEFAULT
       Fortran default module output directory.

       Most  Fortran compilers write .mod files to the current working directory.  For those that
       do not, this is set to . and used when the Fortran_MODULE_DIRECTORY target property is not
       set.

   CMAKE_Fortran_MODDIR_FLAG
       Fortran flag for module output directory.

       This  stores  the  flag  needed  to  pass the value of the Fortran_MODULE_DIRECTORY target
       property to the compiler.

   CMAKE_Fortran_MODOUT_FLAG
       Fortran flag to enable module output.

       Most Fortran compilers write .mod files out by default.  For others, this stores the  flag
       needed to enable module output.

   CMAKE_HIP_ARCHITECTURES
       New in version 3.21.

       Default value for HIP_ARCHITECTURES property of targets.

       This  is initialized to the architectures reported by rocm_agent_enumerator, if available,
       and otherwise to the default chosen by the compiler.

       This variable is used to initialize the HIP_ARCHITECTURES property on all targets. See the
       target property for additional information.

   CMAKE_HIP_EXTENSIONS
       New in version 3.21.

       Default value for HIP_EXTENSIONS target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_HIP_STANDARD
       New in version 3.21.

       Default value for HIP_STANDARD target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_HIP_STANDARD_REQUIRED
       New in version 3.21.

       Default value for HIP_STANDARD_REQUIRED target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_ISPC_HEADER_DIRECTORY
       New in version 3.19.

       ISPC generated header output directory.

       This variable is used to initialize the ISPC_HEADER_DIRECTORY property on all the targets.
       See the target property for additional information.

   CMAKE_ISPC_HEADER_SUFFIX
       New in version 3.19.2.

       Output suffix to be used for ISPC generated headers.

       This  variable  is  used to initialize the ISPC_HEADER_SUFFIX property on all the targets.
       See the target property for additional information.

   CMAKE_ISPC_INSTRUCTION_SETS
       New in version 3.19.

       Default value for ISPC_INSTRUCTION_SETS property of targets.

       This variable is used to initialize the ISPC_INSTRUCTION_SETS property on all targets. See
       the target property for additional information.

   CMAKE_<LANG>_ANDROID_TOOLCHAIN_MACHINE
       New in version 3.7.1.

       When  Cross  Compiling  for  Android this variable contains the toolchain binutils machine
       name (e.g. gcc -dumpmachine).  The binutils typically have a <machine>-  prefix  on  their
       name.

       See also CMAKE_<LANG>_ANDROID_TOOLCHAIN_PREFIX and CMAKE_<LANG>_ANDROID_TOOLCHAIN_SUFFIX.

   CMAKE_<LANG>_ANDROID_TOOLCHAIN_PREFIX
       New in version 3.7.

       When  Cross  Compiling  for Android this variable contains the absolute path prefixing the
       toolchain GNU compiler and its binutils.

       See also CMAKE_<LANG>_ANDROID_TOOLCHAIN_SUFFIX and CMAKE_<LANG>_ANDROID_TOOLCHAIN_MACHINE.

       For example, the path to the linker is:

          ${CMAKE_CXX_ANDROID_TOOLCHAIN_PREFIX}ld${CMAKE_CXX_ANDROID_TOOLCHAIN_SUFFIX}

   CMAKE_<LANG>_ANDROID_TOOLCHAIN_SUFFIX
       New in version 3.7.

       When Cross Compiling for Android this variable contains the host platform  suffix  of  the
       toolchain GNU compiler and its binutils.

       See also CMAKE_<LANG>_ANDROID_TOOLCHAIN_PREFIX and CMAKE_<LANG>_ANDROID_TOOLCHAIN_MACHINE.

   CMAKE_<LANG>_ARCHIVE_APPEND
       Rule variable to append to a static archive.

       This is a rule variable that tells CMake how to append to a static archive.  It is used in
       place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on some platforms in order  to  support  large
       object counts.  See also CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_FINISH.

   CMAKE_<LANG>_ARCHIVE_CREATE
       Rule variable to create a new static archive.

       This  is  a  rule variable that tells CMake how to create a static archive.  It is used in
       place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on some platforms in order  to  support  large
       object counts.  See also CMAKE_<LANG>_ARCHIVE_APPEND and CMAKE_<LANG>_ARCHIVE_FINISH.

   CMAKE_<LANG>_ARCHIVE_FINISH
       Rule variable to finish an existing static archive.

       This  is  a  rule variable that tells CMake how to finish a static archive.  It is used in
       place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on some platforms in order  to  support  large
       object counts.  See also CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_APPEND.

   CMAKE_<LANG>_BYTE_ORDER
       New in version 3.20.

       Byte  order  of  <LANG> compiler target architecture, if known.  If defined and not empty,
       the value is one of:

       BIG_ENDIAN
              The target architecture is Big Endian.

       LITTLE_ENDIAN
              The target architecture is Little Endian.

       This is defined for languages C, CXX, OBJC, OBJCXX, and CUDA.

       If   CMAKE_OSX_ARCHITECTURES   specifies   multiple   architectures,    the    value    of
       CMAKE_<LANG>_BYTE_ORDER is non-empty only if all architectures share the same byte order.

   CMAKE_<LANG>_COMPILE_OBJECT
       Rule variable to compile a single object file.

       This  is  a  rule  variable  that  tells CMake how to compile a single object file for the
       language <LANG>.

   CMAKE_<LANG>_COMPILER
       The full path to the compiler for LANG.

       This is the command that will be used as the <LANG>  compiler.   Once  set,  you  can  not
       change this variable.

   Usage
       This variable can be set by the user during the first time a build tree is configured.

       If  a  non-full  path  value  is  supplied  then  CMake  will resolve the full path of the
       compiler.

       The variable could be set in a user supplied toolchain file or via -D on the command line.

       NOTE:
          Options that are required to make the compiler work correctly can be included as  items
          in a list; they can not be changed.

          #set within user supplied toolchain file
          set(CMAKE_C_COMPILER /full/path/to/qcc --arg1 --arg2)

       or

          $ cmake ... -DCMAKE_C_COMPILER='qcc;--arg1;--arg2'

   CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN
       The external toolchain for cross-compiling, if supported.

       Some  compiler  toolchains do not ship their own auxiliary utilities such as archivers and
       linkers.  The compiler driver may support a command-line argument to specify the  location
       of  such  tools.   CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN  may  be  set to a path to the
       external toolchain and will be passed to the compiler driver if supported.

       This variable may only be set in a toolchain file specified  by  the  CMAKE_TOOLCHAIN_FILE
       variable.

   CMAKE_<LANG>_COMPILER_ID
       Compiler identification string.

       A short string unique to the compiler vendor.  Possible values include:

                       ┌─────────────────────┬──────────────────────────────────┐
                       │Value                │ Name                             │
                       ├─────────────────────┼──────────────────────────────────┤
                       │Absoft               │ Absoft Fortran                   │
                       ├─────────────────────┼──────────────────────────────────┤
                       │ADSP                 │ Analog VisualDSP++               │
                       ├─────────────────────┼──────────────────────────────────┤
                       │AppleClang           │ Apple Clang                      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │ARMCC                │ ARM Compiler                     │
                       ├─────────────────────┼──────────────────────────────────┤
                       │ARMClang             │ ARM Compiler based on Clang      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │Bruce                │ Bruce C Compiler                 │
                       ├─────────────────────┼──────────────────────────────────┤
                       │CCur                 │ Concurrent Fortran               │
                       ├─────────────────────┼──────────────────────────────────┤
                       │ClangLLVM Clang                       │
                       ├─────────────────────┼──────────────────────────────────┤
                       │Cray                 │ Cray Compiler                    │
                       ├─────────────────────┼──────────────────────────────────┤
                       │Embarcadero, BorlandEmbarcadero                      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │FlangClassic Flang Fortran Compiler   │
                       ├─────────────────────┼──────────────────────────────────┤
                       │LLVMFlangLLVM Flang Fortran Compiler      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │Fujitsu              │ Fujitsu HPC compiler (Trad mode) │
                       ├─────────────────────┼──────────────────────────────────┤
                       │FujitsuClang         │ Fujitsu   HPC   compiler  (Clang │
                       │                     │ mode)                            │
                       ├─────────────────────┼──────────────────────────────────┤
                       │G95G95 Fortran                      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │GNUGNU Compiler Collection          │
                       ├─────────────────────┼──────────────────────────────────┤
                       │GHSGreen Hills Software             │
                       ├─────────────────────┼──────────────────────────────────┤
                       │HP                   │ Hewlett-Packard Compiler         │
                       ├─────────────────────┼──────────────────────────────────┤
                       │IAR                  │ IAR Systems                      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │Intel                │ Intel Classic Compiler           │
                       ├─────────────────────┼──────────────────────────────────┤
                       │IntelLLVMIntel LLVM-Based Compiler        │
                       ├─────────────────────┼──────────────────────────────────┤
                       │LCC                  │ MCST    Elbrus     C/C++/Fortran │
                       │                     │ Compiler                         │
                       ├─────────────────────┼──────────────────────────────────┤
                       │MSVCMicrosoft Visual Studio          │
                       ├─────────────────────┼──────────────────────────────────┤
                       │NVHPCNVIDIA HPC Compiler              │
                       ├─────────────────────┼──────────────────────────────────┤
                       │NVIDIANVIDIA CUDA Compiler             │
                       └─────────────────────┴──────────────────────────────────┘

                       │OpenWatcomOpen Watcom                      │
                       ├─────────────────────┼──────────────────────────────────┤
                       │PGI                  │ The Portland Group               │
                       ├─────────────────────┼──────────────────────────────────┤
                       │PathScale            │ PathScale                        │
                       ├─────────────────────┼──────────────────────────────────┤
                       │SDCCSmall Device C Compiler          │
                       ├─────────────────────┼──────────────────────────────────┤
                       │SunPro               │ Oracle Solaris Studio            │
                       ├─────────────────────┼──────────────────────────────────┤
                       │TaskingTasking Compiler Toolsets        │
                       ├─────────────────────┼──────────────────────────────────┤
                       │TI                   │ Texas Instruments                │
                       ├─────────────────────┼──────────────────────────────────┤
                       │TinyCCTiny C Compiler                  │
                       ├─────────────────────┼──────────────────────────────────┤
                       │XL, VisualAge, zOS   │ IBM XL                           │
                       ├─────────────────────┼──────────────────────────────────┤
                       │XLClang              │ IBM Clang-based XL               │
                       ├─────────────────────┼──────────────────────────────────┤
                       │IBMClang             │ IBM LLVM-based Compiler          │
                       └─────────────────────┴──────────────────────────────────┘

       This variable is not guaranteed to be defined for all compilers or languages.

   CMAKE_<LANG>_COMPILER_LOADED
       Defined to true if the language is enabled.

       When language <LANG> is enabled by project() or enable_language() this variable is defined
       to 1.

   CMAKE_<LANG>_COMPILER_PREDEFINES_COMMAND
       New in version 3.10.

       Command that outputs the compiler pre definitions.

       See   AUTOMOC   which   uses   CMAKE_CXX_COMPILER_PREDEFINES_COMMAND   to   generate   the
       AUTOMOC_COMPILER_PREDEFINES.

   CMAKE_<LANG>_COMPILER_TARGET
       The target for cross-compiling, if supported.

       Some  compiler  drivers  are  inherently cross-compilers, such as clang and QNX qcc. These
       compiler drivers support a command-line argument to specify the  target  to  cross-compile
       for.

       This  variable  may  only be set in a toolchain file specified by the CMAKE_TOOLCHAIN_FILE
       variable.

   CMAKE_<LANG>_COMPILER_VERSION
       Compiler version string.

       Compiler version in major[.minor[.patch[.tweak]]] format.  This variable is not guaranteed
       to be defined for all compilers or languages.

       For  example  CMAKE_C_COMPILER_VERSION  and  CMAKE_CXX_COMPILER_VERSION might indicate the
       respective C and C++ compiler version.

   CMAKE_<LANG>_CREATE_SHARED_LIBRARY
       Rule variable to create a shared library.

       This is a rule variable that tells CMake how to create a shared library for  the  language
       <LANG>.   This  rule  variable  is  a  ;  delimited list of commands to run to perform the
       linking step.

   CMAKE_<LANG>_CREATE_SHARED_MODULE
       Rule variable to create a shared module.

       This is a rule variable that tells CMake how to create a shared library for  the  language
       <LANG>.  This rule variable is a ; delimited list of commands to run.

   CMAKE_<LANG>_CREATE_STATIC_LIBRARY
       Rule variable to create a static library.

       This  is  a rule variable that tells CMake how to create a static library for the language
       <LANG>.

   CMAKE_<LANG>_EXTENSIONS
       The variations are:

       • CMAKE_C_EXTENSIONSCMAKE_CXX_EXTENSIONSCMAKE_CUDA_EXTENSIONSCMAKE_HIP_EXTENSIONSCMAKE_OBJC_EXTENSIONSCMAKE_OBJCXX_EXTENSIONS

       Default values for <LANG>_EXTENSIONS target properties if set when a  target  is  created.
       For the compiler's default setting see CMAKE_<LANG>_EXTENSIONS_DEFAULT.

       For supported CMake versions see the respective pages.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_<LANG>_EXTENSIONS_DEFAULT
       New in version 3.22.

       Compiler's default extensions mode. Used as the default for the  <LANG>_EXTENSIONS  target
       property when CMAKE_<LANG>_EXTENSIONS is not set (see CMP0128).

       This variable is read-only.  Modifying it is undefined behavior.

   CMAKE_<LANG>_FLAGS
       Language-wide  flags for language <LANG> used when building for all configurations.  These
       flags will be passed to all invocations of the compiler.  This includes  invocations  that
       drive compiling and those that drive linking.

       For  each  language,  if this variable is not defined, it is initialized and stored in the
       cache using values from environment variables in combination with CMake's builtin defaults
       for the toolchain:

       • CMAKE_C_FLAGS: Initialized by the CFLAGS environment variable.

       • CMAKE_CXX_FLAGS: Initialized by the CXXFLAGS environment variable.

       • CMAKE_CUDA_FLAGS: Initialized by the CUDAFLAGS environment variable.

       • CMAKE_Fortran_FLAGS: Initialized by the FFLAGS environment variable.

       • CMAKE_CSharp_FLAGS: Initialized by the CSFLAGS environment variable.

       • CMAKE_HIP_FLAGS: Initialized by the HIPFLAGS environment variable.

       • CMAKE_ISPC_FLAGS: Initialized by the ISPCFLAGS environment variable.

       This  value  is  a  command-line  string  fragment.  Therefore, multiple options should be
       separated by spaces, and options with spaces should be quoted.

       The flags  in  this  variable  will  be  passed  before  those  in  the  per-configuration
       CMAKE_<LANG>_FLAGS_<CONFIG>  variable.   On invocations driving compiling, flags from both
       variables will be passed before flags added by commands such as add_compile_options()  and
       target_compile_options(). On invocations driving linking, they will be passed before flags
       added by commands such as add_link_options() and target_link_options().

   CMAKE_<LANG>_FLAGS_<CONFIG>
       Language-wide flags for language <LANG> used when building for the <CONFIG> configuration.
       These  flags  will  be  passed  to  all  invocations  of the compiler in the corresponding
       configuration.  This includes invocations  that  drive  compiling  and  those  that  drive
       linking.

       The  flags in this variable will be passed after those in the CMAKE_<LANG>_FLAGS variable.
       On invocations driving compiling, flags from both variables will be  passed  before  flags
       added   by  commands  such  as  add_compile_options()  and  target_compile_options().   On
       invocations driving linking, they will be passed before flags added by  commands  such  as
       add_link_options() and target_link_options().

   CMAKE_<LANG>_FLAGS_<CONFIG>_INIT
       New in version 3.11.

       Value  used  to  initialize  the  CMAKE_<LANG>_FLAGS_<CONFIG> cache entry the first time a
       build tree is configured for language <LANG>.  This variable is  meant  to  be  set  by  a
       toolchain file.  CMake may prepend or append content to the value based on the environment
       and target platform.

       See also CMAKE_<LANG>_FLAGS_INIT.

   CMAKE_<LANG>_FLAGS_DEBUG
       This variable is the Debug variant of the CMAKE_<LANG>_FLAGS_<CONFIG> variable.

   CMAKE_<LANG>_FLAGS_DEBUG_INIT
       New in version 3.7.

       This variable is the Debug variant of the CMAKE_<LANG>_FLAGS_<CONFIG>_INIT variable.

   CMAKE_<LANG>_FLAGS_INIT
       New in version 3.7.

       Value used to initialize the CMAKE_<LANG>_FLAGS cache entry the first time a build tree is
       configured  for  language  <LANG>.   This variable is meant to be set by a toolchain file.
       CMake may prepend or append content to the value  based  on  the  environment  and  target
       platform.  For example, the contents of a xxxFLAGS environment variable will be prepended,
       where xxx will be language-specific but not necessarily the same as <LANG> (e.g.  CXXFLAGS
       for  CXX,  FFLAGS  for Fortran, and so on).  This value is a command-line string fragment.
       Therefore, multiple options should be separated by spaces, and options with spaces  should
       be quoted.

       See also the configuration-specific CMAKE_<LANG>_FLAGS_<CONFIG>_INIT variable.

   CMAKE_<LANG>_FLAGS_MINSIZEREL
       This variable is the MinSizeRel variant of the CMAKE_<LANG>_FLAGS_<CONFIG> variable.

   CMAKE_<LANG>_FLAGS_MINSIZEREL_INIT
       New in version 3.7.

       This variable is the MinSizeRel variant of the CMAKE_<LANG>_FLAGS_<CONFIG>_INIT variable.

   CMAKE_<LANG>_FLAGS_RELEASE
       This variable is the Release variant of the CMAKE_<LANG>_FLAGS_<CONFIG> variable.

   CMAKE_<LANG>_FLAGS_RELEASE_INIT
       New in version 3.7.

       This variable is the Release variant of the CMAKE_<LANG>_FLAGS_<CONFIG>_INIT variable.

   CMAKE_<LANG>_FLAGS_RELWITHDEBINFO
       This variable is the RelWithDebInfo variant of the CMAKE_<LANG>_FLAGS_<CONFIG> variable.

   CMAKE_<LANG>_FLAGS_RELWITHDEBINFO_INIT
       New in version 3.7.

       This  variable  is  the  RelWithDebInfo  variant  of  the CMAKE_<LANG>_FLAGS_<CONFIG>_INIT
       variable.

   CMAKE_<LANG>_IGNORE_EXTENSIONS
       File extensions that should be ignored by the build.

       This is a list of file extensions that may be part of a project for a given  language  but
       are not compiled.

   CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES
       Directories implicitly searched by the compiler for header files.

       CMake does not explicitly specify these directories on compiler command lines for language
       <LANG>.  This prevents system include directories  from  being  treated  as  user  include
       directories on some compilers, which is important for C, CXX, and CUDA to avoid overriding
       standard library headers.

       This value is not used for Fortran because it has no standard  library  headers  and  some
       compilers do not search their implicit include directories for module .mod files.

   CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES
       Implicit linker search path detected for language <LANG>.

       Compilers  typically  pass  directories  containing language runtime libraries and default
       library search paths when they invoke a linker.  These paths are  implicit  linker  search
       directories for the compiler's language.

       For   each   language  enabled  by  the  project()  or  enable_language()  command,  CMake
       automatically detects these directories and reports the results  in  this  variable.   The
       CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES_EXCLUDE  environment variable may be set to exclude
       specific directories from the automatically detected results.

       When linking to a static library, CMake adds  the  implicit  link  directories  from  this
       variable  for each language used in the static library (except the language whose compiler
       is  used  to  drive  linking).   In  the  case  of  an  imported   static   library,   the
       IMPORTED_LINK_INTERFACE_LANGUAGES  target property lists the languages whose implicit link
       information is needed.  If any of  the  languages  is  not  enabled,  its  value  for  the
       CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES  variable  may  instead be provided by the project.
       Or, a toolchain file may set the variable to a value known for  the  specified  toolchain.
       It will either be overridden when the language is enabled, or used as a fallback.

       Some   toolchains   read  implicit  directories  from  an  environment  variable  such  as
       LIBRARY_PATH.  If using such an environment  variable,  keep  its  value  consistent  when
       operating in a given build tree because CMake saves the value detected when first creating
       a build tree.

       If policy CMP0060 is not set to NEW, then when a library in one of  these  directories  is
       given  by  full  path  to target_link_libraries() CMake will generate the -l<name> form on
       link lines for historical purposes.

       See also the CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES variable.

   CMAKE_<LANG>_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
       Implicit linker framework search path detected for language <LANG>.

       These paths are implicit linker framework search directories for the compiler's  language.
       CMake automatically detects these directories for each language and reports the results in
       this variable.

   CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES
       Implicit link libraries and flags detected for language <LANG>.

       Compilers typically pass language runtime library names and other flags when they invoke a
       linker.   These  flags  are  implicit  link options for the compiler's language.  For each
       language enabled by  the  project()  or  enable_language()  command,  CMake  automatically
       detects these libraries and flags and reports the results in this variable.

       When  linking  to  a static library, CMake adds the implicit link libraries and flags from
       this variable for each language used in the static  library  (except  the  language  whose
       compiler  is  used  to  drive  linking).   In  the case of an imported static library, the
       IMPORTED_LINK_INTERFACE_LANGUAGES target property lists the languages whose implicit  link
       information  is  needed.   If  any  of  the  languages  is  not enabled, its value for the
       CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES variable may instead be provided by the project.  Or,
       a  toolchain  file  may set the variable to a value known for the specified toolchain.  It
       will either be overridden when the language is enabled, or used as a fallback.

       See also the CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES variable.

   CMAKE_<LANG>_LIBRARY_ARCHITECTURE
       Target architecture library directory name detected for <LANG>.

       If the <LANG> compiler passes to the linker an architecture-specific system library search
       directory  such  as  <prefix>/lib/<arch>  this  variable  contains  the  <arch> name if/as
       detected by CMake.

   CMAKE_<LANG>_LINK_EXECUTABLE
       Rule variable to link an executable.

       Rule variable to link an executable for the given language.

   CMAKE_<LANG>_LINKER_WRAPPER_FLAG
       New in version 3.13.

       Defines the syntax of compiler driver option to pass options to the linker tool.  It  will
       be  used  to  translate the LINKER: prefix in the link options (see add_link_options() and
       target_link_options()).

       This variable holds a semicolon-separated list of tokens.   If  a  space  (i.e.  "  ")  is
       specified  as  last  token,  flag  and  LINKER:  arguments  will  be specified as separate
       arguments to the compiler driver.  The CMAKE_<LANG>_LINKER_WRAPPER_FLAG_SEP  variable  can
       be specified to manage concatenation of arguments.

       For example, for Clang we have:

          set (CMAKE_C_LINKER_WRAPPER_FLAG "-Xlinker" " ")

       Specifying "LINKER:-z,defs" will be transformed in -Xlinker -z -Xlinker defs.

       For GNU GCC:

          set (CMAKE_C_LINKER_WRAPPER_FLAG "-Wl,")
          set (CMAKE_C_LINKER_WRAPPER_FLAG_SEP ",")

       Specifying "LINKER:-z,defs" will be transformed in -Wl,-z,defs.

       And for SunPro:

          set (CMAKE_C_LINKER_WRAPPER_FLAG "-Qoption" "ld" " ")
          set (CMAKE_C_LINKER_WRAPPER_FLAG_SEP ",")

       Specifying "LINKER:-z,defs" will be transformed in -Qoption ld -z,defs.

   CMAKE_<LANG>_LINKER_WRAPPER_FLAG_SEP
       New in version 3.13.

       This  variable  is  used  with CMAKE_<LANG>_LINKER_WRAPPER_FLAG variable to format LINKER:
       prefix in the link options (see add_link_options() and target_link_options()).

       When specified, arguments of the LINKER: prefix will be concatenated using this  value  as
       separator.

   CMAKE_<LANG>_OUTPUT_EXTENSION
       Extension for the output of a compile for a single file.

       This  is the extension for an object file for the given <LANG>.  For example .obj for C on
       Windows.

   CMAKE_<LANG>_SIMULATE_ID
       Identification string of the "simulated" compiler.

       Some compilers simulate other compilers to serve  as  drop-in  replacements.   When  CMake
       detects   such   a   compiler   it  sets  this  variable  to  what  would  have  been  the
       CMAKE_<LANG>_COMPILER_ID for the simulated compiler.

       NOTE:
          In other words, this variable describes the ABI compatibility of the generated code.

   CMAKE_<LANG>_SIMULATE_VERSION
       Version string of "simulated" compiler.

       Some compilers simulate other compilers to serve  as  drop-in  replacements.   When  CMake
       detects   such   a   compiler   it  sets  this  variable  to  what  would  have  been  the
       CMAKE_<LANG>_COMPILER_VERSION for the simulated compiler.

   CMAKE_<LANG>_SIZEOF_DATA_PTR
       Size of pointer-to-data types for language <LANG>.

       This holds the size (in bytes) of pointer-to-data types in the target platform ABI.  It is
       defined for languages C and CXX (C++).

   CMAKE_<LANG>_SOURCE_FILE_EXTENSIONS
       Extensions of source files for the given language.

       This is the list of extensions for a given language's source files.

   CMAKE_<LANG>_STANDARD
       The variations are:

       • CMAKE_C_STANDARDCMAKE_CXX_STANDARDCMAKE_CUDA_STANDARDCMAKE_HIP_STANDARDCMAKE_OBJC_STANDARDCMAKE_OBJCXX_STANDARD

       Default values for <LANG>_STANDARD target properties if set when a target is created.

       For supported CMake versions see the respective pages.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_<LANG>_STANDARD_DEFAULT
       New in version 3.9.

       The compiler's default standard for the language <LANG>. Empty  if  the  compiler  has  no
       conception of standard levels.

   CMAKE_<LANG>_STANDARD_INCLUDE_DIRECTORIES
       New in version 3.6.

       Include  directories  to  be used for every source file compiled with the <LANG> compiler.
       This is meant for specification of system include directories needed by the  language  for
       the current platform.  The directories always appear at the end of the include path passed
       to the compiler.

       This variable should not be set by project code.   It  is  meant  to  be  set  by  CMake's
       platform  information  modules for the current toolchain, or by a toolchain file when used
       with CMAKE_TOOLCHAIN_FILE.

       See also CMAKE_<LANG>_STANDARD_LIBRARIES.

   CMAKE_<LANG>_STANDARD_LIBRARIES
       New in version 3.6.

       Libraries linked into every executable and shared  library  linked  for  language  <LANG>.
       This is meant for specification of system libraries needed by the language for the current
       platform.

       This variable should not be set by project code.   It  is  meant  to  be  set  by  CMake's
       platform  information  modules for the current toolchain, or by a toolchain file when used
       with CMAKE_TOOLCHAIN_FILE.

       See also CMAKE_<LANG>_STANDARD_INCLUDE_DIRECTORIES.

   CMAKE_<LANG>_STANDARD_REQUIRED
       The variations are:

       • CMAKE_C_STANDARD_REQUIREDCMAKE_CXX_STANDARD_REQUIREDCMAKE_CUDA_STANDARD_REQUIREDCMAKE_HIP_STANDARD_REQUIREDCMAKE_OBJC_STANDARD_REQUIREDCMAKE_OBJCXX_STANDARD_REQUIRED

       Default values for <LANG>_STANDARD_REQUIRED target properties if  set  when  a  target  is
       created.

       For supported CMake versions see the respective pages.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_OBJC_EXTENSIONS
       New in version 3.16.

       Default value for OBJC_EXTENSIONS target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_OBJC_STANDARD
       New in version 3.16.

       Default value for OBJC_STANDARD target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_OBJC_STANDARD_REQUIRED
       New in version 3.16.

       Default value for OBJC_STANDARD_REQUIRED target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_OBJCXX_EXTENSIONS
       New in version 3.16.

       Default value for OBJCXX_EXTENSIONS target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_OBJCXX_STANDARD
       New in version 3.16.

       Default value for OBJCXX_STANDARD target property if set when a target is created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_OBJCXX_STANDARD_REQUIRED
       New in version 3.16.

       Default  value  for  OBJCXX_STANDARD_REQUIRED  target  property  if  set  when a target is
       created.

       See the cmake-compile-features(7) manual for information on compile features and a list of
       supported compilers.

   CMAKE_Swift_LANGUAGE_VERSION
       New in version 3.7.

       Set  to the Swift language version number.  If not set, the oldest legacy version known to
       be available in the host Xcode version is assumed:

       • Swift 4.0 for Xcode 10.2 and above.

       • Swift 3.0 for Xcode 8.3 and above.

       • Swift 2.3 for Xcode 8.2 and below.

   CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>
       Specify a CMake file that overrides platform information for <LANG>.

       This is a language-specific version of  CMAKE_USER_MAKE_RULES_OVERRIDE  loaded  only  when
       enabling language <LANG>.

VARIABLES FOR CTEST

   CTEST_BINARY_DIRECTORY
       New in version 3.1.

       Specify the CTest BuildDirectory setting in a ctest(1) dashboard client script.

   CTEST_BUILD_COMMAND
       New in version 3.1.

       Specify the CTest MakeCommand setting in a ctest(1) dashboard client script.

   CTEST_BUILD_NAME
       New in version 3.1.

       Specify the CTest BuildName setting in a ctest(1) dashboard client script.

   CTEST_BZR_COMMAND
       New in version 3.1.

       Specify the CTest BZRCommand setting in a ctest(1) dashboard client script.

   CTEST_BZR_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest BZRUpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_CHANGE_ID
       New in version 3.4.

       Specify the CTest ChangeId setting in a ctest(1) dashboard client script.

       This setting allows CTest to pass arbitrary information about this build up to CDash.  One
       use of this feature is to allow CDash to post comments on your pull  request  if  anything
       goes wrong with your build.

   CTEST_CHECKOUT_COMMAND
       New in version 3.1.

       Tell  the  ctest_start()  command  how to checkout or initialize the source directory in a
       ctest(1) dashboard client script.

   CTEST_CONFIGURATION_TYPE
       New in version 3.1.

       Specify the CTest DefaultCTestConfigurationType setting in  a  ctest(1)  dashboard  client
       script.

       If  the configuration type is set via -C <cfg> from the command line then this variable is
       populated accordingly.

   CTEST_CONFIGURE_COMMAND
       New in version 3.1.

       Specify the CTest ConfigureCommand setting in a ctest(1) dashboard client script.

   CTEST_COVERAGE_COMMAND
       New in version 3.1.

       Specify the CTest CoverageCommand setting in a ctest(1) dashboard client script.

   Cobertura
       Using Cobertura as the coverage generation  within  your  multi-module  Java  project  can
       generate a series of XML files.

       The  Cobertura  Coverage  parser  expects to read the coverage data from a single XML file
       which contains the coverage data for all  modules.   Cobertura  has  a  program  with  the
       ability to merge given cobertura.ser files and then another program to generate a combined
       XML file from the previous merged file.  For command line testing, this  can  be  done  by
       hand  prior  to  CTest  looking  for  the  coverage  files.  For  script  builds,  set the
       CTEST_COVERAGE_COMMAND variable to point to a file which will perform  these  same  steps,
       such as a .sh or .bat file.

          set(CTEST_COVERAGE_COMMAND .../run-coverage-and-consolidate.sh)

       where   the   run-coverage-and-consolidate.sh   script   is   perhaps   created   by   the
       configure_file() command and might contain the following code:

          #!/usr/bin/env bash
          CoberturaFiles="$(find "/path/to/source" -name "cobertura.ser")"
          SourceDirs="$(find "/path/to/source" -name "java" -type d)"
          cobertura-merge --datafile coberturamerge.ser $CoberturaFiles
          cobertura-report --datafile coberturamerge.ser --destination . \
                           --format xml $SourceDirs

       The script uses find to capture the paths to all of the cobertura.ser  files  found  below
       the project's source directory.  It keeps the list of files and supplies it as an argument
       to the cobertura-merge program. The --datafile argument signifies where the result of  the
       merge will be kept.

       The  combined  coberturamerge.ser  file  is then used to generate the XML report using the
       cobertura-report program.  The call to the cobertura-report program  requires  some  named
       arguments.

       --datafila
              path to the merged .ser file

       --destination
              path to put the output files(s)

       --format
              file format to write output in: xml or html

       The  rest  of  the  supplied  arguments  consist  of  the full paths to the /src/main/java
       directories of each module within the source tree. These directories are needed and should
       not be forgotten.

   CTEST_COVERAGE_EXTRA_FLAGS
       New in version 3.1.

       Specify the CTest CoverageExtraFlags setting in a ctest(1) dashboard client script.

   CTEST_CURL_OPTIONS
       New in version 3.1.

       Specify the CTest CurlOptions setting in a ctest(1) dashboard client script.

   CTEST_CUSTOM_COVERAGE_EXCLUDE
       A  list  of  regular  expressions  which  will be used to exclude files by their path from
       coverage output by the ctest_coverage() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_ERROR_EXCEPTION
       A  list of regular expressions which will be used to exclude when detecting error messages
       in build outputs by the ctest_build() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_ERROR_MATCH
       A list of regular expressions which will be used to detect error messages in build outputs
       by the ctest_build() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_ERROR_POST_CONTEXT
       The  number  of  lines  to  include  as  context  which  follow  an  error  message by the
       ctest_build() command. The default is 10.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_ERROR_PRE_CONTEXT
       The  number  of  lines  to  include  as  context  which  precede  an  error message by the
       ctest_build() command. The default is 10.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
       When  saving  a  failing  test's  output, this is the maximum size, in bytes, that will be
       collected  by  the   ctest_test()   command.   Defaults   to   307200   (300   KiB).   See
       CTEST_CUSTOM_TEST_OUTPUT_TRUNCATION for possible truncation modes.

       If a test's output contains the literal string "CTEST_FULL_OUTPUT", the output will not be
       truncated and may exceed the maximum size.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

       For     controlling     the     output     collection     of     passing     tests,    see
       CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE.

   CTEST_CUSTOM_MAXIMUM_NUMBER_OF_ERRORS
       The maximum number of errors in a single build step which will be detected.   After  this,
       the ctest_test() command will truncate the output.  Defaults to 50.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS
       The maximum number of warnings in a single build step which will be detected.  After this,
       the ctest_test() command will truncate the output.  Defaults to 50.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
       When saving a passing test's output, this is the maximum size,  in  bytes,  that  will  be
       collected    by    the   ctest_test()   command.   Defaults   to   1024   (1   KiB).   See
       CTEST_CUSTOM_TEST_OUTPUT_TRUNCATION for possible truncation modes.

       If a test's output contains the literal string "CTEST_FULL_OUTPUT", the output will not be
       truncated and may exceed the maximum size.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

       For    controlling     the     output     collection     of     failing     tests,     see
       CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE.

   CTEST_CUSTOM_MEMCHECK_IGNORE
       A list of regular expressions to use to exclude tests during the ctest_memcheck() command.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_POST_MEMCHECK
       A list of commands to run at the end of the ctest_memcheck() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_POST_TEST
       A list of commands to run at the end of the ctest_test() command.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_PRE_MEMCHECK
       A list of commands to run at the start of the ctest_memcheck() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_PRE_TEST
       A list of commands to run at the start of the ctest_test() command.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_TEST_OUTPUT_TRUNCATION
       New in version 3.24.

       Set the test output truncation  mode  in  case  a  maximum  size  is  configured  via  the
       CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE                                            or
       CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE variables.  By default the tail of the output
       will be truncated. Other possible values are middle and head.

       It   is   initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom  file.  See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_TESTS_IGNORE
       A list of test names to be excluded from the set of tests run by the ctest_test() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_WARNING_EXCEPTION
       A  list  of  regular  expressions  which  will  be  used to exclude when detecting warning
       messages in build outputs by the ctest_build() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CUSTOM_WARNING_MATCH
       A  list  of  regular  expressions  which  will be used to detect warning messages in build
       outputs by the ctest_build() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_CVS_CHECKOUT
       New in version 3.1.

       Deprecated.  Use CTEST_CHECKOUT_COMMAND instead.

   CTEST_CVS_COMMAND
       New in version 3.1.

       Specify the CTest CVSCommand setting in a ctest(1) dashboard client script.

   CTEST_CVS_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest CVSUpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_DROP_LOCATION
       New in version 3.1.

       Specify the CTest DropLocation setting in a ctest(1) dashboard client script.

   CTEST_DROP_METHOD
       New in version 3.1.

       Specify the CTest DropMethod setting in a ctest(1) dashboard client script.

   CTEST_DROP_SITE
       New in version 3.1.

       Specify the CTest DropSite setting in a ctest(1) dashboard client script.

   CTEST_DROP_SITE_CDASH
       New in version 3.1.

       Specify the CTest IsCDash setting in a ctest(1) dashboard client script.

   CTEST_DROP_SITE_PASSWORD
       New in version 3.1.

       Specify the CTest DropSitePassword setting in a ctest(1) dashboard client script.

   CTEST_DROP_SITE_USER
       New in version 3.1.

       Specify the CTest DropSiteUser setting in a ctest(1) dashboard client script.

   CTEST_EXTRA_COVERAGE_GLOB
       New in version 3.4.

       A  list of regular expressions which will be used to find files which should be covered by
       the ctest_coverage() command.

       It  is  initialized  by  ctest(1),  but  may  be  edited  in  a  CTestCustom   file.   See
       ctest_read_custom_files() documentation.

   CTEST_GIT_COMMAND
       New in version 3.1.

       Specify the CTest GITCommand setting in a ctest(1) dashboard client script.

   CTEST_GIT_INIT_SUBMODULES
       New in version 3.6.

       Specify the CTest GITInitSubmodules setting in a ctest(1) dashboard client script.

   CTEST_GIT_UPDATE_CUSTOM
       New in version 3.1.

       Specify the CTest GITUpdateCustom setting in a ctest(1) dashboard client script.

   CTEST_GIT_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest GITUpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_HG_COMMAND
       New in version 3.1.

       Specify the CTest HGCommand setting in a ctest(1) dashboard client script.

   CTEST_HG_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest HGUpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_LABELS_FOR_SUBPROJECTS
       New in version 3.10.

       Specify the CTest LabelsForSubprojects setting in a ctest(1) dashboard client script.

   CTEST_MEMORYCHECK_COMMAND
       New in version 3.1.

       Specify the CTest MemoryCheckCommand setting in a ctest(1) dashboard client script.

   CTEST_MEMORYCHECK_COMMAND_OPTIONS
       New in version 3.1.

       Specify the CTest MemoryCheckCommandOptions setting in a ctest(1) dashboard client script.

   CTEST_MEMORYCHECK_SANITIZER_OPTIONS
       New in version 3.1.

       Specify  the  CTest  MemoryCheckSanitizerOptions  setting  in  a ctest(1) dashboard client
       script.

       CTest prepends correct  sanitizer  options  *_OPTIONS  environment  variable  to  executed
       command.  CTests  adds  its  own  log_path  to  sanitizer  options, don't provide your own
       log_path.

   CTEST_MEMORYCHECK_SUPPRESSIONS_FILE
       New in version 3.1.

       Specify the CTest  MemoryCheckSuppressionFile  setting  in  a  ctest(1)  dashboard  client
       script.

   CTEST_MEMORYCHECK_TYPE
       New in version 3.1.

       Specify  the  CTest  MemoryCheckType setting in a ctest(1) dashboard client script.  Valid
       values are Valgrind,  Purify,  BoundsChecker,  DrMemory,  CudaSanitizer,  ThreadSanitizer,
       AddressSanitizer, LeakSanitizer, MemorySanitizer and UndefinedBehaviorSanitizer.

   CTEST_NIGHTLY_START_TIME
       New in version 3.1.

       Specify the CTest NightlyStartTime setting in a ctest(1) dashboard client script.

       Note  that  this variable must always be set for a nightly build in a dashboard script. It
       is needed so that nightly builds can be properly grouped together in CDash.

   CTEST_P4_CLIENT
       New in version 3.1.

       Specify the CTest P4Client setting in a ctest(1) dashboard client script.

   CTEST_P4_COMMAND
       New in version 3.1.

       Specify the CTest P4Command setting in a ctest(1) dashboard client script.

   CTEST_P4_OPTIONS
       New in version 3.1.

       Specify the CTest P4Options setting in a ctest(1) dashboard client script.

   CTEST_P4_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest P4UpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_RESOURCE_SPEC_FILE
       New in version 3.18.

       Specify the CTest ResourceSpecFile setting in a ctest(1) dashboard client script.

       This can also be used to specify the  resource  spec  file  from  a  CMake  build.  If  no
       RESOURCE_SPEC_FILE   is  passed  to  ctest_test(),  and  CTEST_RESOURCE_SPEC_FILE  is  not
       specified in the dashboard script, the value of this variable from the build is used.

   CTEST_RUN_CURRENT_SCRIPT
       New in version 3.11.

       Setting this to 0 prevents ctest(1) from being run again when it  reaches  the  end  of  a
       script run by calling ctest -S.

   CTEST_SCP_COMMAND
       New in version 3.1.

       Legacy option.  Not used.

   CTEST_SCRIPT_DIRECTORY
       The  directory  containing  the  top-level  CTest  script.   The  concept  is  similar  to
       CMAKE_SOURCE_DIR.

   CTEST_SITE
       New in version 3.1.

       Specify the CTest Site setting in a ctest(1) dashboard client script.

   CTEST_SOURCE_DIRECTORY
       New in version 3.1.

       Specify the CTest SourceDirectory setting in a ctest(1) dashboard client script.

   CTEST_SUBMIT_INACTIVITY_TIMEOUT
       New in version 3.23.

       Specify the CTest SubmitInactivityTimeout setting in a ctest(1) dashboard client script.

   CTEST_SUBMIT_URL
       New in version 3.14.

       Specify the CTest SubmitURL setting in a ctest(1) dashboard client script.

   CTEST_SVN_COMMAND
       New in version 3.1.

       Specify the CTest SVNCommand setting in a ctest(1) dashboard client script.

   CTEST_SVN_OPTIONS
       New in version 3.1.

       Specify the CTest SVNOptions setting in a ctest(1) dashboard client script.

   CTEST_SVN_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest SVNUpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_TEST_LOAD
       New in version 3.4.

       Specify the TestLoad setting in the CTest Test Step of a ctest(1) dashboard client script.
       This sets the default value for the TEST_LOAD option of the ctest_test() command.

   CTEST_TEST_TIMEOUT
       New in version 3.1.

       Specify the CTest TimeOut setting in a ctest(1) dashboard client script.

   CTEST_TRIGGER_SITE
       New in version 3.1.

       Legacy option.  Not used.

   CTEST_UPDATE_COMMAND
       New in version 3.1.

       Specify the CTest UpdateCommand setting in a ctest(1) dashboard client script.

   CTEST_UPDATE_OPTIONS
       New in version 3.1.

       Specify the CTest UpdateOptions setting in a ctest(1) dashboard client script.

   CTEST_UPDATE_VERSION_ONLY
       New in version 3.1.

       Specify the CTest UpdateVersionOnly setting in a ctest(1) dashboard client script.

   CTEST_UPDATE_VERSION_OVERRIDE
       New in version 3.15.

       Specify the CTest UpdateVersionOverride setting in a ctest(1) dashboard client script.

   CTEST_USE_LAUNCHERS
       New in version 3.1.

       Specify the CTest UseLaunchers setting in a ctest(1) dashboard client script.

VARIABLES FOR CPACK

   CPACK_ABSOLUTE_DESTINATION_FILES
       List of files which have been installed using an ABSOLUTE DESTINATION path.

       This variable is a Read-Only variable which is set internally by CPack during installation
       and before packaging using CMAKE_ABSOLUTE_DESTINATION_FILES defined in cmake_install.cmake
       scripts.    The  value  can  be  used  within  CPack  project  configuration  file  and/or
       CPack<GEN>.cmake file of <GEN> generator.

   CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY
       Boolean toggle to include/exclude top level directory (component case).

       Similar usage  as  CPACK_INCLUDE_TOPLEVEL_DIRECTORY  but  for  the  component  case.   See
       CPACK_INCLUDE_TOPLEVEL_DIRECTORY documentation for the detail.

   CPACK_CUSTOM_INSTALL_VARIABLES
       New in version 3.21.

       CPack  variables  (set  via  e.g. cpack -D, CPackConfig.cmake or CPACK_PROJECT_CONFIG_FILE
       scripts) are not directly visible in installation scripts.  Instead, one can pass  a  list
       of  varName=value  pairs in the CPACK_CUSTOM_INSTALL_VARIABLES variable.  At install time,
       each list item will result in a variable of the specified name (varName) being set to  the
       given value.  The = can be omitted for an empty value.

       CPACK_CUSTOM_INSTALL_VARIABLES  allows  the packaging installation to be influenced by the
       user or driving script at CPack runtime without having to regenerate the install scripts.

   Example
          install(FILES large.txt DESTINATION data)

          install(CODE [[
            if(ENABLE_COMPRESSION)
              # "run-compressor" is a fictional tool that produces
              # large.txt.xz from large.txt and then removes the input file
              execute_process(COMMAND run-compressor $ENV{DESTDIR}${CMAKE_INSTALL_PREFIX}/large.txt)
            endif()
          ]])

       With the above example snippet, cpack will by default run  the  installation  script  with
       ENABLE_COMPRESSION  unset,  resulting  in a package containing the uncompressed large.txt.
       This can be overridden when invoking cpack like so:

          cpack -D "CPACK_CUSTOM_INSTALL_VARIABLES=ENABLE_COMPRESSION=TRUE"

       The installation script will then run with ENABLE_COMPRESSION set to TRUE, resulting in  a
       package containing the compressed large.txt.xz instead.

   CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
       Ask CPack to error out as soon as a file with absolute INSTALL DESTINATION is encountered.

       The  fatal  error  is  emitted  before the installation of the offending file takes place.
       Some CPack generators, like NSIS, enforce this internally.   This  variable  triggers  the
       definition of CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION when CPack runs.

   CPACK_INCLUDE_TOPLEVEL_DIRECTORY
       Boolean toggle to include/exclude top level directory.

       When  preparing a package CPack installs the item under the so-called top level directory.
       The purpose of is to include (set to 1 or ON or TRUE)  the  top  level  directory  in  the
       package or not (set to 0 or OFF or FALSE).

       Each  CPack  generator  has  a  built-in  default  value for this variable.  E.g.  Archive
       generators (ZIP, TGZ, ...) includes the top level whereas RPM or DEB don't.  The user  may
       override the default value by setting this variable.

       There  is  a similar variable CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY which may be used
       to override the behavior for the component packaging case which may have different default
       value for historical (now backward compatibility) reason.

   CPACK_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS
       New in version 3.11.

       Default permissions for implicitly created directories during packaging.

       This     variable     serves    the    same    purpose    during    packaging    as    the
       CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS variable serves during installation (e.g. make
       install).

       If  include(CPack)  is  used  then  by  default  this  variable  is  set to the content of
       CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS.

   CPACK_PACKAGING_INSTALL_PREFIX
       The prefix used in the built package.

       Each CPack generator has  a  default  value  (like  /usr).   This  default  value  may  be
       overwritten from the CMakeLists.txt or the cpack(1) command line by setting an alternative
       value.  Example:

          set(CPACK_PACKAGING_INSTALL_PREFIX "/opt")

       This is not the same purpose as CMAKE_INSTALL_PREFIX which is used  when  installing  from
       the build tree without building a package.

   CPACK_SET_DESTDIR
       Boolean toggle to make CPack use DESTDIR mechanism when packaging.

       DESTDIR  means  DESTination  DIRectory.  It is commonly used by makefile users in order to
       install software at non-default location.  It is a basic relocation mechanism that  should
       not  be  used  on Windows (see CMAKE_INSTALL_PREFIX documentation).  It is usually invoked
       like this:

          make DESTDIR=/home/john install

       which will install the concerned software using the installation prefix,  e.g.  /usr/local
       prepended with the DESTDIR value which finally gives /home/john/usr/local.  When preparing
       a package, CPack first installs the items to be packaged in a local (to  the  build  tree)
       directory  by using the same DESTDIR mechanism.  Nevertheless, if CPACK_SET_DESTDIR is set
       then CPack will  set  DESTDIR  before  doing  the  local  install.   The  most  noticeable
       difference is that without CPACK_SET_DESTDIR, CPack uses CPACK_PACKAGING_INSTALL_PREFIX as
       a prefix whereas with CPACK_SET_DESTDIR set, CPack  will  use  CMAKE_INSTALL_PREFIX  as  a
       prefix.

       Manually setting CPACK_SET_DESTDIR may help (or simply be necessary) if some install rules
       uses  absolute  DESTINATION  (see  CMake  install()  command).   However,  starting   with
       CPack/CMake  2.8.3 RPM and DEB installers tries to handle DESTDIR automatically so that it
       is seldom necessary for the user to set it.

   CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
       Ask CPack to warn each time a file with absolute INSTALL DESTINATION is encountered.

       This variable triggers the definition of  CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION  when
       CPack runs cmake_install.cmake scripts.

VARIABLE EXPANSION OPERATORS

   CACHE
       New in version 3.13.

       Operator to read cache variables.

       Use  the  syntax $CACHE{VAR} to read cache entry VAR.  See the cmake-language(7) variables
       documentation for more complete documentation of the interaction of normal  variables  and
       cache entries.

       When  evaluating Variable References of the form ${VAR}, CMake first searches for a normal
       variable with that name, and if not found CMake will search for a cache  entry  with  that
       name.   The  $CACHE{VAR}  syntax  can  be  used  to  do direct cache lookup and ignore any
       existing normal variable.

       See the set() and unset() commands to see how to write or remove cache variables.

   ENV
       Operator to read environment variables.

       Use the syntax $ENV{VAR} to read environment variable VAR.

       To test  whether  an  environment  variable  is  defined,  use  the  signature  if(DEFINED
       ENV{<name>}) of the if() command.

       For general information on environment variables, see the Environment Variables section in
       the cmake-language(7) manual.

INTERNAL VARIABLES

       CMake has many internal variables.  Most of them are undocumented.  Some of them, however,
       were  at  some  point  described  as normal variables, and therefore may be encountered in
       legacy code. They are subject to change, and not recommended for use in project code.

   CMAKE_HOME_DIRECTORY
       Path to top of source tree. Same as CMAKE_SOURCE_DIR.

       This is an internal cache entry used  to  locate  the  source  directory  when  loading  a
       CMakeCache.txt  from  a  build tree.  It should not be used in project code.  The variable
       CMAKE_SOURCE_DIR has the same value and should be preferred.

   CMAKE_INTERNAL_PLATFORM_ABI
       An internal variable subject to change.

       This is used in determining the compiler ABI and is subject to change.

   CMAKE_<LANG>_COMPILER_ABI
       An internal variable subject to change.

       This is used in determining the compiler ABI and is subject to change.

   CMAKE_<LANG>_COMPILER_ARCHITECTURE_ID
       New in version 3.10.

       An internal variable subject to change.

       This is used to identify the variant of a compiler based on its target architecture.   For
       some compilers this is needed to determine the correct usage.

   CMAKE_<LANG>_COMPILER_VERSION_INTERNAL
       New in version 3.10.

       An internal variable subject to change.

       This  is  used  to identify the variant of a compiler based on an internal version number.
       For some compilers this is needed to determine the correct usage.

   CMAKE_<LANG>_LINKER_PREFERENCE
       An internal variable subject to change.

       Preference value for linker language selection.

       The "linker language" for executable, shared library, and module targets is  the  language
       whose  compiler  will  invoke  the  linker.   The LINKER_LANGUAGE target property sets the
       language explicitly.  Otherwise, the linker language is that whose linker preference value
       is   highest  among  languages  compiled  and  linked  into  the  target.   See  also  the
       CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES variable.

   CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES
       An internal variable subject to change.

       True if CMAKE_<LANG>_LINKER_PREFERENCE propagates across targets.

       This is used when CMake selects a  linker  language  for  a  target.   Languages  compiled
       directly into the target are always considered.  A language compiled into static libraries
       linked by the target is considered if this variable is true.

   CMAKE_<LANG>_PLATFORM_ID
       An internal variable subject to change.

       This is used in determining the platform and is subject to change.

   CMAKE_NOT_USING_CONFIG_FLAGS
       Skip _BUILD_TYPE flags if true.

       This is an internal flag used by the generators  in  CMake  to  tell  CMake  to  skip  the
       _BUILD_TYPE flags.

   CMAKE_VS_INTEL_Fortran_PROJECT_VERSION
       When  generating  for  Visual  Studio  9  2008  or  greater  with the Intel Fortran plugin
       installed, this specifies the .vfproj project file format version.  This is  intended  for
       internal use by CMake and should not be used by project code.

COPYRIGHT

       2000-2023 Kitware, Inc. and Contributors