Provided by: groff_1.23.0-2_amd64 
Name
groff_man_style - GNU roff man page tutorial and style guide
Synopsis
groff -man [option ...] [file ...]
groff -m man [option ...] [file ...]
Description
The GNU implementation of the man macro package is part of the groff document formatting
system. It is used to produce manual pages (“man pages”) like the one you are reading.
This document presents the macros thematically; for those needing only a quick reference,
the following table lists them alphabetically, with cross references to appropriate
subsections below.
Macro Meaning Subsection
───────────────────────────────────────────────────────────────
.B Bold Font style macros
.BI Bold, italic alternating Font style macros
.BR Bold, roman alternating Font style macros
.EE Example end Document structure macros
.EX Example begin Document structure macros
.I Italic Font style macros
.IB Italic, bold alternating Font style macros
.IP Indented paragraph Paragraphing macros
.IR Italic, roman alternating Font style macros
.LP Begin paragraph Paragraphing macros
.ME Mail-to end Hyperlink macros
.MR Man page cross reference Hyperlink macros
.MT Mail-to start Hyperlink macros
.P Begin paragraph Paragraphing macros
.PP Begin paragraph Paragraphing macros
.RB Roman, bold alternating Font style macros
.RE Relative inset end Document structure macros
.RI Roman, italic alternating Font style macros
.RS Relative inset start Document structure macros
.SB Small bold Font style macros
.SH Section heading Document structure macros
.SM Small Font style macros
.SS Subsection heading Document structure macros
.SY Synopsis start Command synopsis macros
.TH Title heading Document structure macros
.TP Tagged paragraph Paragraphing macros
.TQ Supplemental paragraph tag Paragraphing macros
.UE URI end Hyperlink macros
.UR URI start Hyperlink macros
.YS Synopsis end Command synopsis macros
We discuss other macros (.AT, .DT, .HP, .OP, .PD, and .UC) in subsection “Deprecated
features” below.
Throughout Unix documentation, a manual entry is referred to simply as a “man page”,
regardless of its length, without gendered implication, and irrespective of the macro
package selected for its composition.
Man pages should be encoded using Unicode basic Latin code points exclusively, and employ
the Unix line-ending convention (U+000A only).
Fundamental concepts
groff is a programming system for typesetting: we thus often use the verb “to set” in the
sense “to typeset”. The formatter troff(1) collects words from the input and fills output
lines with as many as will fit. Words are separated by spaces and newlines. A transition
to a new output line is called a break. When formatted, a word may be broken at hyphens,
at \% or \: escape sequences (see subsection “Portability” below), or at predetermined
locations if automatic hyphenation is enabled (see the -rHY option in section “Options”
below). An output line may be supplemented with inter-sentence space, and then optionally
adjusted with more space to a consistent line length (see the -dAD option). roff(7)
details these processes.
An input line that starts with a dot (.) or neutral apostrophe (') is a control line. To
call a macro, put its name after a dot on a control line. We refer to macros in this
document using this leading dot. Some macros interpret arguments, words that follow the
macro name. A newline, unless escaped (see subsection “Portability” below), marks the end
of the macro call. An input line consisting of a dot followed by a newline is called the
empty request; it does nothing. Text lines are input lines that are not control lines.
We describe below several man macros that plant one-line input traps: the next input line
that directly produces formatted output is treated specially. For man documents that
follow the advice in section “Portability” below, this means that control lines using the
empty request and uncommented input lines ending with an escaped newline do not spring the
trap; anything else does (but see the .TP macro description).
Macro reference preliminaries
A tagged paragraph describes each macro. We present coupled pairs together, as with .EX
and .EE.
Optional macro arguments are indicated by surrounding them with square brackets. If a
macro accepts multiple arguments, those containing space characters must be double-quoted
to be interpreted correctly. An empty macro argument can be specified with a pair of
double-quotes (""), but the man package is designed such that this should seldom be
necessary. See section “Notes” below for examples of cases where better alternatives to
empty arguments in macro calls are available. Most macro arguments will be formatted as
text in the output; exceptions are noted.
Document structure macros
Document structure macros organize a man page's content. All of them break the output
line. .TH (title heading) identifies the document as a man page and configures the page
headers and footers. Section headings (.SH), one of which is mandatory and many of which
are conventionally expected, facilitate location of material by the reader and aid the man
page writer to discuss all essential aspects of the topic. Subsection headings (.SS) are
optional and permit sections that grow long to develop in a controlled way. Many
technical discussions benefit from examples; lengthy ones, especially those reflecting
multiple lines of input to or output from the system, are usefully bracketed by .EX and
.EE. When none of the foregoing meets a structural demand, use .RS/.RE to inset a region
within a (sub)section.
.TH topic section [footer-middle] [footer-inside] [header-middle]
Determine the contents of the page header and footer. roff systems refer to these
collectively as “titles”. The subject of the man page is topic and the section of
the manual to which it belongs is section. This use of “section” has nothing to do
with the section headings otherwise discussed in this page; it arises from the
organizational scheme of printed and bound Unix manuals. See man(1) or intro(1)
for the manual sectioning applicable to your system. topic and section are
positioned together at the left and right in the header (with section in
parentheses immediately appended to topic). footer-middle is centered in the
footer. The arrangement of the rest of the footer depends on whether double-sided
layout is enabled with the option -rD1. When disabled (the default), footer-inside
is positioned at the bottom left. Otherwise, footer-inside appears at the bottom
left on recto (odd-numbered) pages, and at the bottom right on verso (even-
numbered) pages. The outside footer is the page number, except in the continuous-
rendering mode enabled by the option -rcR=1, in which case it is the topic and
section, as in the header. header-middle is centered in the header. If section is
an integer between 1 and 9 (inclusive), there is no need to specify header-middle;
an.tmac will supply text for it. The macro package may also abbreviate topic and
footer-inside with ellipses (...) if they would overrun the space available in the
header and footer, respectively. For HTML output, headers and footers are
suppressed.
Additionally, this macro breaks the page, resetting the number to 1 (unless the
-rC1 option is given). This feature is intended only for formatting multiple man
documents in sequence.
A valid man document calls .TH once, early in the file, prior to any other macro
calls.
By convention, footer-middle is the date of the most recent modification to the man
page source document, and footer-inside is the name and version or release of the
project providing it.
.SH [heading-text]
Set heading-text as a section heading. If no argument is given, a one-line input
trap is planted; text on the next line becomes heading-text. The left margin is
reset to zero to set the heading text in bold (or the font specified by the string
HF), and, on typesetting devices, slightly larger than the base type size. If the
heading font \*[HF] is bold, use of an italic style in heading-text is mapped to
the bold-italic style if available in the font family. The inset level is reset to
1, setting the left margin to the value of the IN register. Text after heading-
text is set as an ordinary paragraph (.P).
The content of heading-text and ordering of sections follows a set of common
practices, as has much of the layout of material within sections. For example, a
section called “Name” or “NAME” must exist, must be the first section after the .TH
call, and must contain only text of the form
topic[, another-topic]... \- summary-description
for a man page to be properly indexed. See man(7) for the conventions prevailing
on your system.
.SS [subheading-text]
Set subheading-text as a subsection heading indented between a section heading and
an ordinary paragraph (.P). If no argument is given, a one-line input trap is
planted; text on the next line becomes subheading-text. The left margin is reset
to the value of the SN register to set the heading text in bold (or the font
specified by the string HF). If the heading font \*[HF] is bold, use of an italic
style in subheading-text is mapped to the bold-italic style if available in the
font family. The inset level is reset to 1, setting the left margin to the value
of the IN register. Text after subheading-text is set as an ordinary paragraph
(.P).
.EX
.EE Begin and end example. After .EX, filling is disabled and a constant-width
(monospaced) font is selected. Calling .EE enables filling and restores the
previous font.
Example regions are useful for formatting code, shell sessions, and text file
contents. An example region is not a “literal mode” of any sort: special character
escape sequences must still be used to produce correct glyphs for ', -, \, ^, `,
and ~, and sentence endings are still detected and additional inter-sentence space
applied. If the amount of additional inter-sentence spacing is altered, the
rendering of, for instance, regular expressions using . or ? followed by multiple
spaces can change. Use the dummy character escape sequence \& before the spaces.
These macros are extensions introduced in Ninth Edition Research Unix. Systems
running that troff, or those from Documenter's Workbench, Heirloom Doctools, or
Plan 9 troff support them. To be certain your page will be portable to systems
that do not, copy their definitions from the an-ext.tmac file of a groff
installation.
.RS [inset-amount]
Start a new relative inset level. The position of the left margin is saved, then
moved right by inset-amount, if specified, and by the amount of the IN register
otherwise. Calls to .RS can be nested; each increments by 1 the inset level used
by .RE. The level prior to any .RS calls is 1.
.RE [level]
End a relative inset. The left margin corresponding to inset level level is
restored. If no argument is given, the inset level is reduced by 1.
Paragraphing macros
An ordinary paragraph (.P) like this one is set without a first-line indentation at the
current left margin. In man pages and other technical literature, definition lists are
frequently encountered; these can be set as “tagged paragraphs”, which have one (.TP) or
more (.TQ) leading tags followed by a paragraph that has an additional indentation. The
indented paragraph (.IP) macro is useful to continue the indented content of a narrative
started with .TP, or to present an itemized or ordered list. All of these macros break
the output line. If another paragraph macro has occurred since the previous .SH or .SS,
they (except for .TQ) follow the break with a default amount of vertical space, which can
be changed by the deprecated .PD macro; see subsection “Horizontal and vertical spacing”
below. They also reset the type size and font style to defaults (.TQ again excepted); see
subsection “Font style macros” below.
.P
.LP
.PP Begin a new paragraph; these macros are synonymous. The indentation is reset to
the default value; the left margin, as affected by .RS and .RE, is not.
.TP [indentation]
Set a paragraph with a leading tag, and the remainder of the paragraph indented. A
one-line input trap is planted; text on the next line, which can be formatted with
a macro, becomes the tag, which is placed at the current left margin. The tag can
be extended with the \c escape sequence. Subsequent text is indented by
indentation, if specified, and by the amount of the IN register otherwise. If the
tag is not as wide as the indentation, the paragraph starts on the same line as the
tag, at the applicable indentation, and continues on the following lines.
Otherwise, the descriptive part of the paragraph begins on the line following the
tag.
The line containing the tag can include a macro call, for instance to set the tag
in bold with .B. .TP was used to write the first paragraph of this description of
.TP, and .IP the subsequent one.
.TQ Set an additional tag for a paragraph tagged with .TP. An input trap is planted as
with .TP.
This macro is a GNU extension not defined on systems running AT&T, Plan 9, or
Solaris troff; see an-ext.tmac in section “Files” below.
The descriptions of .P, .LP, and .PP above were written using .TP and .TQ.
.IP [tag] [indentation]
Set an indented paragraph with an optional tag. The tag and indentation arguments,
if present, are handled as with .TP, with the exception that the tag argument to
.IP cannot include a macro call.
Two convenient uses for .IP are
(1) to start a new paragraph with the same indentation as an immediately
preceding .IP or .TP paragraph, if no indentation argument is given; and
(2) to set a paragraph with a short tag that is not semantically important,
such as a bullet (•)—obtained with the \(bu special character escape
sequence—or list enumerator, as seen in this very paragraph.
Command synopsis macros
.SY and .YS aid you to construct a command synopsis that has the classical Unix
appearance. They break the output line.
These macros are GNU extensions not defined on systems running AT&T, Plan 9, or Solaris
troff; see an-ext.tmac in section “Files” below.
.SY command
Begin synopsis. A new paragraph begins at the left margin (as with .P) unless .SY
has already been called without a corresponding .YS, in which case only a break is
performed. Adjustment and automatic hyphenation are disabled. command is set in
bold. If a break is required, lines after the first are indented by the width of
command plus a space.
.YS End synopsis. Indentation, adjustment, and hyphenation are restored to their
previous states.
Multiple .SY/.YS blocks can be specified, for instance to distinguish differing modes of
operation of a complex command like tar(1); each will be vertically separated as
paragraphs are.
.SY can be repeated before .YS to indicate synonymous ways of invoking a particular mode
of operation.
groff's own command-line interface serves to illustrate most of the specimens of synopsis
syntax one is likely to encounter.
.SY groff
.RB [ \-abcCeEgGijklNpRsStUVXzZ ]
.RB [ \-d\~\c
.IR cs ]
.RB [ \-d\~\c
.IB name =\c
.IR string ]
.RB [ \-D\~\c
.IR enc ]
(and so on similarly)
.RI [ file\~ .\|.\|.]
.YS
.
.
.SY groff
.B \-h
.
.SY groff
.B \-\-help
.YS
.
.
.SY groff
.B \-v
.RI [ option\~ .\|.\|.\&]
.RI [ file\~ .\|.\|.]
.
.SY groff
.B \-\-version
.RI [ option\~ .\|.\|.\&]
.RI [ file\~ .\|.\|.]
.YS
produces the following output.
groff [-abcCeEgGijklNpRsStUVXzZ] [-d cs] [-d name=string] [-D enc] [-f fam]
[-F dir] [-I dir] [-K enc] [-L arg] [-m name] [-M dir] [-n num] [-o list]
[-P arg] [-r cn] [-r reg=expr] [-T dev] [-w name] [-W name] [file ...]
groff -h
groff --help
groff -v [option ...] [file ...]
groff --version [option ...] [file ...]
Several features of the above example are of note.
• The empty request (.), which does nothing, is used to vertically space the input file
for readability by the document maintainer. Do not put blank (empty) lines in a man
page source document.
• Command and option names are presented in bold to cue the user that they should be input
literally.
• Option dashes are specified with the \- escape sequence; this is an important practice
to make them clearly visible and to facilitate copy-and-paste from the rendered man page
to a shell prompt or text file.
• Option arguments and command operands are presented in italics (but see subsection “Font
style macros” below regarding terminals) to cue the user that they must be replaced with
appropriate text.
• Symbols that are neither to be typed literally nor replaced at the user's discretion
appear in the roman style; brackets surround optional arguments, and an ellipsis
indicates that the previous syntactical element may be repeated arbitrarily.
• The non-breaking adjustable space escape sequence \~ is used to prevent the output line
from being broken within the option brackets; see subsection “Portability” below.
• The output line continuation escape sequence \c is used with font style alternation
macros to allow all three font styles to be set without (breakable) space among them;
see subsection “Portability” below.
• The dummy character escape sequence \& follows the ellipsis when further text will
follow after space on the output line, keeping its last period from being interpreted as
the end of a sentence and causing additional inter-sentence space to be placed after it.
See subsection “Portability” below.
Hyperlink macros
Man page cross references like ls(1) are best presented with .MR. Text may be hyperlinked
to email addresses with .MT/.ME or other URIs with .UR/.UE. Hyperlinked text is supported
on HTML and terminal output devices; terminals and pager programs must support ECMA-48
OSC 8 escape sequences (see grotty(1)). When device support is unavailable or disabled
with the U register (see section “Options” below), .MT and .UR URIs are rendered between
angle brackets after the linked text.
.MT, .ME, .UR, and .UE are GNU extensions not defined on systems running AT&T, Plan 9, or
Solaris troff; see an-ext.tmac in section “Files” below. Plan 9 from User Space's troff
implements .MR.
The arguments to .MR, .MT, and .UR should be prepared for typesetting since they can
appear in the output. Use special character escape sequences to encode Unicode basic
Latin characters where necessary, particularly the hyphen-minus. (See section
“Portability” below.) URIs can be lengthy; rendering them can result in jarring
adjustment or variations in line length, or troff warnings when a hyperlink is longer than
an output line. The application of non-printing break point escape sequences \: after
each slash (or series thereof), and before each dot (or series thereof) is recommended as
a rule of thumb. The former practice avoids forcing a trailing slash in a URI onto a
separate output line, and the latter helps the reader to avoid mistakenly interpreting a
dot at the end of a line as a period (or multiple dots as an ellipsis). Thus,
.UR http://\:example\:.com/\:fb8afcfbaebc74e\:.cc
has several potential break points in the URI shown. Consider adding break points before
or after at signs in email addresses, and question marks, ampersands, and number signs in
HTTP(S) URIs. The formatter removes \: escape sequences from hyperlinks when supplying
device control commands to output drivers.
.MR topic manual-section [trailing-text]
(since groff 1.23) Set a man page cross reference as “topic(manual-section)”. If
trailing-text (typically punctuation) is specified, it follows the closing
parenthesis without intervening space. Hyphenation is disabled while the cross
reference is set. topic is set in the font specified by the MF string. The cross
reference hyperlinks to a URI of the form “man:topic(manual-section)”.
The output driver
.MR grops 1
produces PostScript from
.I troff
output.
.
The Ghostscript program (\c
.MR gs 1 )
interprets PostScript and PDF.
.MT address
.ME [trailing-text]
Identify address as an RFC 6068 addr-spec for a “mailto:” URI with the text between
the two macro calls as the link text. An argument to .ME is placed after the link
text without intervening space. address may not be visible in the rendered
document if hyperlinks are enabled and supported by the output driver. If they are
not, address is set in angle brackets after the link text and before trailing-text.
If hyperlinking is enabled but there is no link text, address is formatted and
hyperlinked without angle brackets.
When rendered by groff to a PostScript device,
Contact
.MT fred\:.foonly@\:fubar\:.net
Fred Foonly
.ME
for more information.
displays as “Contact Fred Foonly ⟨fred.foonly@fubar.net⟩ for more information.”.
.UR uri
.UE [trailing-text]
Identify uri as an RFC 3986 URI hyperlink with the text between the two macro calls
as the link text. An argument to .UE is placed after the link text without
intervening space. uri may not be visible in the rendered document if hyperlinks
are enabled and supported by the output driver. If they are not, uri is set in
angle brackets after the link text and before trailing-text. If hyperlinking is
enabled but there is no link text, uri is formatted and hyperlinked without angle
brackets.
When rendered by groff to a PostScript device,
The GNU Project of the Free Software Foundation
hosts the
.UR https://\:www\:.gnu\:.org/\:software/\:groff/
.I groff
home page
.UE .
displays as “The GNU Project of the Free Software Foundation hosts the groff home
page ⟨https://www.gnu.org/software/groff/⟩.”.
The hyperlinking of .TP paragraph tags with .UR/.UE and .MT/.ME is not yet supported; if
attempted, the hyperlink will be typeset at the beginning of the indented paragraph even
on hyperlink-supporting devices.
Font style macros
The man macro package is limited in its font styling options, offering only bold (.B),
italic (.I), and roman. Italic text is usually set underscored instead on terminal
devices. The .SM and .SB macros set text in roman or bold, respectively, at a smaller
type size; these differ visually from regular-sized roman or bold text only on typesetting
devices. It is often necessary to set text in different styles without intervening space.
The macros .BI, .BR, .IB, .IR, .RB, and .RI, where “B”, “I”, and “R” indicate bold,
italic, and roman, respectively, set their odd- and even-numbered arguments in alternating
styles, with no space separating them.
Because font styles are presentational rather than semantic, conflicting traditions have
arisen regarding which font styles should be used to mark file or path names, environment
variables, and inlined literals.
The default type size and family for typesetting devices is 10-point Times, except on the
X75-12 and X100-12 devices where the type size is 12 points. The default style is roman.
.B [text]
Set text in bold. If no argument is given, a one-line input trap is planted; text
on the next line, which can be further formatted with a macro, is set in bold.
Use bold for literal portions of syntax synopses, for command-line options in
running text, and for literals that are major topics of the subject under
discussion; for example, this page uses bold for macro, string, and register names.
In an .EX/.EE example of interactive I/O (such as a shell session), set only user
input in bold.
.I [text]
Set text in an italic or oblique face. If no argument is given, a one-line input
trap is planted; text on the next line, which can be further formatted with a
macro, is set in an italic or oblique face.
Use italics for file and path names, for environment variables, for C data types,
for enumeration or preprocessor constants in C, for variant (user-replaceable)
portions of syntax synopses, for the first occurrence (only) of a technical concept
being introduced, for names of journals and of literary works longer than an
article, and anywhere a parameter requiring replacement by the user is encountered.
An exception involves variant text in a context already typeset in italics, such as
file or path names with replaceable components; in such cases, follow the
convention of mathematical typography: set the file or path name in italics as
usual but use roman for the variant part (see .IR and .RI below), and italics again
in running roman text when referring to the variant material.
.SM [text]
Set text one point smaller than the default type size on typesetting devices. If
no argument is given, a one-line input trap is planted; text on the next line,
which can be further formatted with a macro, is set smaller.
Note: terminals will render text at normal size instead. Do not rely upon .SM to
communicate semantic information distinct from using roman style at normal size; it
will be hidden from readers using such devices.
.SB [text]
Set text in bold and (on typesetting devices) one point smaller than the default
type size. If no argument is given, a one-line input trap is planted; text on the
next line, which can be further formatted with a macro, is set smaller and in bold.
This macro is an extension introduced in SunOS 4.0.
Note: terminals will render text in bold at the normal size instead. Do not rely
upon .SB to communicate semantic information distinct from using bold style at
normal size; it will be hidden from readers using such devices.
Observe what is not prescribed for setting in bold or italics above: elements of “synopsis
language” such as ellipses and brackets around options; proper names and adjectives;
titles of anything other than major works of literature; identifiers for standards
documents or technical reports such as CSTR #54, RFC 1918, Unicode 13.0, or POSIX.1-2017;
acronyms; and occurrences after the first of a technical term.
Be frugal with italics for emphasis, and particularly with bold. Article titles and brief
runs of literal text, such as references to individual characters or short strings,
including section and subsection headings of man pages, are suitable objects for
quotation; see the \(lq, \(rq, \(oq, and \(cq escape sequences in subsection “Portability”
below.
Unlike the above font style macros, the font style alternation macros below set no input
traps; they must be given arguments to have effect. Italic corrections are applied as
appropriate. If a space is required within an argument, first consider whether the same
result could be achieved with as much clarity by using single-style macros on separate
input lines. When it cannot, double-quote an argument containing embedded space
characters. Setting all three different styles within a word presents challenges; it is
possible with the \c and/or \f escape sequences. See subsection “Portability” below for
approaches.
.BI bold-text italic-text ...
Set each argument in bold and italics, alternately.
.BI -r register = numeric-expression
.BR bold-text roman-text ...
Set each argument in bold and roman, alternately.
After
.B .NH
is called,
.IB italic-text bold-text ...
Set each argument in italics and bold, alternately.
In places where
.IB n th
is allowed,
.IR italic-text roman-text ...
Set each argument in italics and roman, alternately.
Use GNU
.IR pic 's
.B figname
command to change the name of the vbox.
.RB roman-text bold-text ...
Set each argument in roman and bold, alternately.
if
.I file
is
.RB \[lq] \- \[rq],
the standard input stream is read.
.RI roman-text italic-text ...
Set each argument in roman and italics, alternately.
.RI ( tpic
was a fork of AT&T
.I pic
by Tim Morgan of the University of California at Irvine
Horizontal and vertical spacing
The indentation argument accepted by .IP, .TP, and the deprecated .HP is a number plus an
optional scaling unit, as is .RS's inset-amount. If no scaling unit is given, the man
package assumes “n”; that is, the width of a letter “n” in the font current when the macro
is called (see section “Measurements” in groff(7)). An indentation specified in a call to
.IP, .TP, or the deprecated .HP persists until (1) another of these macros is called with
an indentation argument, or (2) .SH, .SS, or .P or its synonyms is called; these clear the
indentation entirely.
The left margin used by ordinary paragraphs set with .P (and its synonyms) not within an
.RS/.RE relative inset is 7.2n for typesetting devices and 7n for terminal devices (but
see the -rIN option). Headers, footers (both set with .TH), and section headings (.SH)
are set at the page offset (see groff(7)) and subsection headings (.SS) indented from it
by 3n (but see the -rSN option).
It may be helpful to think of the left margin and indentation as related but distinct
concepts; groff's implementation of the man macro package tracks them separately. The
left margin is manipulated by .RS and .RE (and by .SH and .SS, which reset it to the
default). Indentation is controlled by the paragraphing macros (though, again, .SH and
.SS reset it); it is imposed by the .TP, .IP, and deprecated .HP macros, and cancelled by
.P and its synonyms. An extensive example follows.
This ordinary (.P) paragraph is not in a relative inset nor does it possess an
indentation.
Now we have created a relative inset (in other words, moved the left margin) with
.RS and started another ordinary paragraph with .P.
tag This tagged paragraph, set with .TP, is still within the .RS region, but
lines after the first have a supplementary indentation that the tag lacks.
A paragraph like this one, set with .IP, will appear to the reader as also
associated with the tag above, because .IP re-uses the previous paragraph's
indentation unless given an argument to change it. This paragraph is
affected both by the moved left margin (.RS) and indentation (.IP).
┌─────────────────────────────────┐
│This table is affected both by │
│the left margin and indentation. │
└─────────────────────────────────┘
• This indented paragraph has a bullet for a tag, making it more obvious that
the left margin and indentation are distinct; only the former affects the
tag, but both affect the text of the paragraph.
This ordinary (.P) paragraph resets the indentation, but the left margin is still
inset.
┌────────────────────────────┐
│This table is affected only │
│by the left margin. │
└────────────────────────────┘
Finally, we have ended the relative inset by using .RE, which (because we used only one
.RS/.RE pair) has reset the left margin to the default. This is an ordinary .P paragraph.
Resist the temptation to mock up tabular or multi-column output with tab characters or the
indentation arguments to .IP, .TP, .RS, or the deprecated .HP; the result may not render
comprehensibly on an output device you fail to check, or which is developed in the future.
The table preprocessor tbl(1) can likely meet your needs.
Several macros insert vertical space: .SH, .SS, .TP, .P (and its synonyms), .IP, and the
deprecated .HP. The default inter-section and inter-paragraph spacing is is 1v for
terminal devices and 0.4v for typesetting devices (“v” is a unit of vertical distance,
where 1v is the distance between adjacent text baselines in a single-spaced document).
(The deprecated macro .PD can change this vertical spacing, but its use is discouraged.)
Between .EX and .EE calls, the inter-paragraph spacing is 1v regardless of output device.
Registers
Registers are described in section “Options” below. They can be set not only on the
command line but in the site man.local file as well; see section “Files” below.
Strings
The following strings are defined for use in man pages. Others are supported for
configuration of rendering parameters; see section “Options” below.
\*R interpolates a special character escape sequence for the “registered sign” glyph,
\(rg, if available, and “(Reg.)” otherwise.
\*S interpolates an escape sequence setting the type size to the document default.
\*(lq
\*(rq interpolate special character escape sequences for left and right double-quotation
marks, \(lq and \(rq, respectively.
\*(Tm interpolates a special character escape sequence for the “trade mark sign” glyph,
\(tm, if available, and “(TM)” otherwise.
None of the above is necessary in a contemporary man page. \*S is superfluous, since type
size changes are invisible on terminal devices and macros that change it restore its
original value afterward. Better alternatives exist for the rest; simply use the \(rg,
\(lq, \(rq, and \(tm special character escape sequences directly. Unless a man page
author is aiming for a pathological level of portability, such as the composition of pages
for consumption on simulators of 1980s Unix systems (or Solaris troff, though even it
supports \(rg), the above strings should be avoided.
Portability
It is wise to quote multi-word section and subsection headings; the .SH and .SS macros of
man(7) implementations descended from Seventh Edition Unix supported six arguments at
most. A similar restriction applied to the .B, .I, .SM, and font style alternation
macros.
The two major syntactical categories for formatting control in the roff language are
requests and escape sequences. Since the man macros are implemented in terms of groff
requests and escape sequences, one can, in principle, supplement the functionality of man
with these lower-level elements where necessary.
However, using raw groff requests (apart from the empty request “.”) is likely to make
your page render poorly when processed by other tools; many of these attempt to interpret
page sources directly for conversion to HTML. Some requests make implicit assumptions
about things like character and page sizes that may not hold in an HTML environment; also,
many of these viewers don't interpret the full groff vocabulary, a problem that can lead
to portions of your text being omitted or presented incomprehensibly.
For portability to modern viewers, it is best to write your page solely with the macros
described in this page (except for the ones identified as deprecated, which should be
avoided). The macros we have described as extensions (.EX/.EE, .SY/.YS, .TQ, .UR/.UE,
.MT/.ME, .MR, and .SB) should be used with caution, as they may not be built in to some
viewer that is important to your audience. See an-ext.tmac in section “Files” below.
Similar caveats apply to escape sequences. Some escape sequences are however required for
correct typesetting even in man pages and usually do not cause portability problems.
Several of these render glyphs corresponding to punctuation code points in the Unicode
basic Latin range (U+0000–U+007F) that are handled specially in roff input; the escape
sequences below must be used to render them correctly and portably when documenting
material that uses them syntactically—namely, any of the set ' - \ ^ ` ~ (apostrophe, dash
or minus, backslash, caret, grave accent, tilde).
\" Comment. Everything after the double-quote to the end of the input line is
ignored. Whole-line comments should be placed immediately after the empty request
(“.”).
\newline
Join the next input line to the current one. Except for the update of the input
line counter (used for diagnostic messages and related purposes), a series of lines
ending in backslash-newline appears to groff as a single input line. Use this
escape sequence to split excessively long input lines for document maintenance.
\% Control hyphenation. The location of this escape sequence within a word marks a
hyphenation point, supplementing groff's automatic hyphenation patterns. At the
beginning of a word, it suppresses any hyphenation breaks within except those
specified with \%.
\: Insert a non-printing break point. A word can break at such a point, but a hyphen
glyph is not written to the output if it does. This escape sequence is an input
word boundary, so the remainder of the word is subject to hyphenation as normal.
You can use \: and \% in combination to control breaking of a file name or URI or
to permit hyphenation only after certain explicit hyphens within a word. See
subsection “Hyperlink macros” above for an example.
This escape sequence is a groff extension also supported by Heirloom Doctools troff
050915 (September 2005), mandoc 1.14.5 (2019-03-10), and neatroff (commit 399a4936,
2014-02-17), but not by Plan 9, Solaris, or Documenter's Workbench troffs.
\~ Adjustable non-breaking space. Use this escape sequence to prevent a break inside
a short phrase or between a numerical quantity and its corresponding unit(s).
Before starting the motor,
set the output speed to\~1.
There are 1,024\~bytes in 1\~KiB.
CSTR\~#8 documents the B\~language.
This escape sequence is a groff extension also supported by Heirloom Doctools troff
050915 (September 2005), mandoc 1.9.5 (2009-09-21), neatroff (commit 1c6ab0f6e,
2016-09-13), and Plan 9 from User Space troff (commit 93f8143600, 2022-08-12), but
not by Solaris or Documenter's Workbench troffs.
\& Dummy character. Insert at the beginning of an input line to prevent a dot or
apostrophe from being interpreted as beginning a roff control line. Append to an
end-of-sentence punctuation sequence to keep it from being recognized as such.
\| Thin space (one-sixth em on typesetters, zero-width on terminals); a non-breaking
space. Used primarily in ellipses (“.\|.\|.”) to space the dots more pleasantly
on typesetting devices like dvi, pdf, and ps.
\c End a text line without inserting space or attempting a break. Normally, if
filling is enabled, the end of a text line is treated like a space; an output line
may be broken there (if not, an adjustable space is inserted); if filling is
disabled, the line will be broken there, as in .EX/.EE examples. The next line is
interpreted as usual and can include a macro call (contrast with \newline). \c is
useful when three font styles are needed in a single word, as in a command
synopsis.
.RB [ \-\-stylesheet=\c
.IR name ]
It also helps when changing font styles in .EX/.EE examples, since they are not
filled.
.EX
$ \c
.B groff \-T utf8 \-Z \c
.I file \c
.B | grotty \-i
.EE
Alternatively, and perhaps with better portability, the \f font selection escape
sequence can be used; see below. Using \c to continue a .TP paragraph tag across
multiple input lines will render incorrectly with groff 1.22.3, mandoc 1.14.1,
older versions of these programs, and perhaps with some other formatters.
\e Format the current escape character on the output; widely used in man pages to
render a backslash glyph. It works reliably as long as the “.ec” request is not
used, which should never happen in man pages, and it is slightly more portable than
the more explicit \(rs (“reverse solidus”) special character escape sequence.
\fB, \fI, \fR, \fP
Switch to bold, italic, roman, or back to the previous style, respectively. Either
\f or \c is needed when three different font styles are required in a word.
.RB [ \-\-reference\-dictionary=\fI\,name\/\fP ]
.RB [ \-\-reference\-dictionary=\c
.IR name ]
Style escape sequences may be more portable than \c. As shown above, it is up to
you to account for italic corrections with “\/” and “\,”, which are themselves GNU
extensions, if desired and if supported by your implementation.
\fP reliably returns to the style in use immediately preceding the previous \f
escape sequence only if no sectioning, paragraph, or style macro calls have
intervened.
As long as at most two styles are needed in a word, style macros like .B and .BI
usually result in more readable roff source than \f escape sequences do.
Several special characters are also widely portable. Except for \-, \(em, and \(ga, AT&T
troff did not consistently define the characters listed below, but its descendants, like
Plan 9 or Solaris troff, can be made to support them by defining them in font description
files, making them aliases of existing glyphs if necessary; see groff_font(5).
\- Minus sign or basic Latin hyphen-minus. This escape sequence produces the Unix
command-line option dash in the output. “-” is a hyphen in the roff language; some
output devices replace it with U+2010 (hyphen) or similar.
\(aq Basic Latin neutral apostrophe. Some output devices format “'” as a right single
quotation mark.
\(oq
\(cq Opening (left) and closing (right) single quotation marks. Use these for paired
directional single quotes, ‘like this’.
\(dq Basic Latin quotation mark (double quote). Use in macro calls to prevent ‘"” from
being interpreted as beginning a quoted argument, or simply for readability.
.TP
.BI "split \(dq" text \(dq
\(lq
\(rq Left and right double quotation marks. Use these for paired directional double
quotes, “like this”.
\(em Em-dash. Use for an interruption—such as this one—in a sentence.
\(en En-dash. Use to separate the ends of a range, particularly between numbers; for
example, “the digits 1–9”.
\(ga Basic Latin grave accent. Some output devices format “`” as a left single
quotation mark.
\(ha Basic Latin circumflex accent (“hat”). Some output devices format “^” as U+02C6
(modifier letter circumflex accent) or similar.
\(rs Reverse solidus (backslash). The backslash is the default escape character in the
roff language, so it does not represent itself in output. Also see \e above.
\(ti Basic Latin tilde. Some output devices format “~” as U+02DC (small tilde) or
similar.
For maximum portability, escape sequences and special characters not listed above are
better avoided in man pages.
Hooks
Two macros, both GNU extensions, are called internally by the groff man package to format
page headers and footers and can be redefined by the administrator in a site's man.local
file (see section “Files” below). The presentation of .TH above describes the default
headers and footers. Because these macros are hooks for groff man internals, man pages
have no reason to call them. Such hook definitions will likely consist of “.sp” and “.tl”
requests. They must also increase the page length with “.pl” requests in continuous
rendering mode; .PT furthermore has the responsibility of emitting a PDF bookmark after
writing the first page header in a document. Consult the existing implementations in
an.tmac when drafting replacements.
.BT Set the page footer text (“bottom trap”).
.PT Set the page header text (“page trap”).
To remove a page header or footer entirely, define the appropriate macro as empty rather
than deleting it.
Deprecated features
Use of the following in man pages for public distribution is discouraged.
.AT [system [release]]
Alter the footer for use with legacy AT&T man pages, overriding any definition of
the footer-inside argument to .TH. This macro exists only to render man pages from
historical systems.
system can be any of the following.
3 7th edition (default)
4 System III
5 System V
The optional release argument specifies the release number, as in “System V
Release 3”.
.DT Reset tab stops to the default (every 0.5i [inches]).
Use of this presentation-oriented macro is deprecated. It translates poorly to
HTML, under which exact space control and tabulation are not readily available.
Thus, information or distinctions that you use tab stops to express are likely to
be lost. If you feel tempted to change the tab stops such that calling this macro
later is desirable to restore them, you should probably be composing a table using
tbl(1) instead.
.HP [indentation]
Set up a paragraph with a hanging left indentation. The indentation argument, if
present, is handled as with .TP.
Use of this presentation-oriented macro is deprecated. A hanging indentation
cannot be expressed naturally under HTML, and non-roff-based man page interpreters
may treat .HP as an ordinary paragraph. Thus, information or distinctions you mean
to express with indentation may be lost.
.OP option-name [option-argument]
Indicate an optional command parameter called option-name, which is set in bold.
If the option takes an argument, specify option-argument using a noun,
abbreviation, or hyphenated noun phrase. If present, option-argument is preceded
by a space and set in italics. Square brackets in roman surround both arguments.
Use of this quasi-semantic macro, an extension originating in Documenter's
Workbench troff, is deprecated. It cannot easily be used to annotate options that
take optional arguments or options whose arguments have internal structure (such as
a mixture of literal and variable components). One could work around these
limitations with font selection escape sequences, but it is preferable to use font
style alternation macros, which afford greater flexibility.
.PD [vertical-space]
Define the vertical space between paragraphs or (sub)sections. The optional
argument vertical-space specifies the amount; the default scaling unit is “v”.
Without an argument, the spacing is reset to its default value; see subsection
“Horizontal and vertical spacing” above.
Use of this presentation-oriented macro is deprecated. It translates poorly to
HTML, under which exact control of inter-paragraph spacing is not readily
available. Thus, information or distinctions that you use .PD to express are
likely to be lost.
.UC [version]
Alter the footer for use with legacy BSD man pages, overriding any definition of
the footer-inside argument to .TH. This macro exists only to render man pages from
historical systems.
version can be any of the following.
3 3rd Berkeley Distribution (default)
4 4th Berkeley Distribution
5 4.2 Berkeley Distribution
6 4.3 Berkeley Distribution
7 4.4 Berkeley Distribution
History
M. Douglas McIlroy ⟨m.douglas.mcilroy@dartmouth.edu⟩ designed, implemented, and documented
the AT&T man macros for Unix Version 7 (1979) and employed them to edit the first volume
of its Programmer's Manual, a compilation of all man pages supplied by the system. That
man supported the macros listed in this page not described as extensions, except .P and
the deprecated .AT and .UC. The only strings defined were R and S; no registers were
documented.
.UC appeared in 3BSD (1980). Unix System III (1980) introduced .P and exposed the
registers IN and LL, which had been internal to Seventh Edition Unix man. PWB/UNIX 2.0
(1980) added the Tm string. 4BSD (1980) added lq and rq strings. SunOS 2.0 (1985)
recognized C, D, P, and X registers. 4.3BSD (1986) added .AT and .P. Ninth Edition
Research Unix (1986) introduced .EX and .EE. SunOS 4.0 (1988) added .SB.
The foregoing features were what James Clark implemented in early versions of groff.
Later, groff 1.20 (2009) originated .SY/.YS, .TQ, .MT/.ME, and .UR/.UE. Plan 9 from User
Space's troff introduced .MR in 2020.
Options
The following groff options set registers (with -r) and strings (with -d) recognized and
used by the man macro package. To ensure rendering consistent with output device
capabilities and reader preferences, man pages should never manipulate them.
-dAD=adjustment-mode
Set line adjustment to adjustment-mode, which is typically “b” for adjustment to
both margins (the default), or “l” for left alignment (ragged right margin). Any
valid argument to groff's “.ad” request may be used. See groff(7) for less-common
choices.
-rcR=1 Enable continuous rendering. Output is not paginated; instead, one (potentially
very long) page is produced. This is the default for terminal and HTML devices.
Use -rcR=0 to disable it on terminal devices; on HTML devices, it cannot be
disabled.
-rC1 Number output pages consecutively, in strictly increasing sequence, rather than
resetting the page number to 1 (or the value of register P) with each new man
document.
-rCS=1 Set section headings (the argument(s) to .SH) in full capitals. This
transformation is off by default because it discards case distinction information.
-rCT=1 Set the man page topic (the first argument to .TH) in full capitals in headers and
footers. This transformation is off by default because it discards case
distinction information.
-rD1 Enable double-sided layout, formatting footers for even and odd pages differently;
see the description of .TH in subsection “Document structure macros” above.
-rFT=footer-distance
Set distance of the footer relative to the bottom of the page to footer-distance;
this amount is always negative. At one half-inch above this location, the page
text is broken before writing the footer. Ignored if continuous rendering is
enabled. The default is -0.5i.
-dHF=heading-font
Set the font used for section and subsection headings; the default is “B” (bold
style of the default family). Any valid argument to groff's “.ft” request may be
used. See groff(7).
-rHY=0 Disable automatic hyphenation. Normally, it is enabled (1). The hyphenation mode
is determined by the groff locale; see section “Localization“ of groff(7).
-rIN=standard-indentation
Set the amount of indentation used for ordinary paragraphs (.P and its synonyms)
and the default indentation amount used by .IP, .RS, .TP, and the deprecated .HP.
See subsection “Horizontal and vertical spacing” above for the default. For
terminal devices, standard-indentation should always be an integer multiple of unit
“n” to get consistent indentation.
-rLL=line-length
Set line length; the default is 78n for terminal devices and 6.5i for typesetting
devices.
-rLT=title-length
Set the line length for titles. (“Titles” is the roff term for headers and
footers.) By default, it is set to the line length (see -rLL above).
-dMF=man-page-topic-font
Set the font used for man page topics named in .TH and .MR calls; the default is
“I” (italic style of the default family). Any valid argument to groff's “.ft”
request may be used. If the MF string ends in “I”, it is assumed to be an oblique
typeface, and italic corrections are applied before and after man page topics.
-rPn Start enumeration of pages at n. The default is 1.
-rStype-size
Use type-size for the document's body text; acceptable values are 10, 11, or 12
points. See subsection “Font style macros” above for the default.
-rSN=subsection-indentation
Set indentation of subsection headings to subsection-indentation. See subsection
“Horizontal and vertical spacing” above for the default.
-rU1 Enable generation of URI hyperlinks in the grohtml and grotty output drivers.
grohtml enables them by default; grotty does not, pending more widespread pager
support for OSC 8 escape sequences. Use -rU0 to disable hyperlinks; this will make
the arguments to MT and UR calls visible in the document text produced by link-
capable drivers.
-rXp Number successors of page p as pa, pb, pc, and so forth. The register tracking the
suffixed page letter uses format “a” (see the “.af” request in groff(7)). For
example, the option -rX2 produces the following page numbers: 1, 2, 2a, 2b, ...,
2aa, 2ab, and so on.
Files
/usr/share/groff/1.23.0/tmac/an.tmac
Most man macros are defined in this file. It also loads extensions from
an-ext.tmac (see below).
/usr/share/groff/1.23.0/tmac/andoc.tmac
This brief groff program detects whether the man or mdoc macro package is being
used by a document and loads the correct macro definitions, taking advantage of the
fact that pages using them must call .TH or .Dd, respectively, before any other
macros. A man program or user typing, for example, “groff -mandoc page.1”, need
not know which package the file page.1 uses. Multiple man pages, in either format,
can be handled; andoc reloads each macro package as necessary.
/usr/share/groff/1.23.0/tmac/an-ext.tmac
Except for .SB, definitions of macros described above as extensions are contained
in this file; in some cases, they are simpler versions of definitions appearing in
an.tmac, and are ignored if the formatter is GNU troff. They are written to be
compatible with AT&T troff and permissively licensed—not copylefted. To reduce the
risk of name space collisions, string and register names begin only with “m”. We
encourage man page authors who are concerned about portability to legacy Unix
systems to copy these definitions into their pages, and maintainers of troff
implementations or work-alike systems that format man pages to re-use them.
The definitions for these macros are read after a page calls .TH, so they will
replace any macros of the same names preceding it in your file. If you use your
own implementations of these macros, they must be defined after .TH is called to
have any effect. Furthermore, it is wise to define such page-local macros (if at
all) after the “Name” section to accommodate timid makewhatis or mandb
implementations that may give up their scan for indexing material early.
/usr/share/groff/1.23.0/tmac/man.tmac
This is a wrapper that loads an.tmac.
/usr/share/groff/1.23.0/tmac/mandoc.tmac
This is a wrapper that loads andoc.tmac.
/usr/share/groff/site-tmac/man.local
Put site-local changes and customizations into this file.
.\" Use narrower indentation on terminals and similar.
.if n .nr IN 4n
.\" Put only one space after the end of a sentence.
.ss 12 0 \" See groff(7).
.\" Keep pages narrow even on wide terminals.
.if n .if \n[LL]>78n .nr LL 78n
.\" Ensure hyperlinks are enabled for terminals.
.nr U 1
On multi-user systems, it is more considerate to users whose preferences may differ
from the administrator's to be less aggressive with such settings, or to permit
their override with a user-specific man.local file. Place the requests below at
the end of the site-local file to manifest courtesy.
.soquiet \V[XDG_CONFIG_HOME]/man.local
.soquiet \V[HOME]/.man.local
However, a security-sandboxed man(1) program may lack permission to open such
files.
Notes
Some tips on troubleshooting your man pages follow.
• Some ASCII characters look funny or copy and paste wrong.
On devices with large glyph repertoires, like UTF-8-capable terminals and PDF,
several keyboard glyphs are mapped to code points outside the Unicode basic Latin
range because that usually results in better typography in the general case. When
documenting GNU/Linux command or C language syntax, however, this translation is
sometimes not desirable.
To get a “literal”... ...should be input.
────────────────────────────────────────────
' \(aq
- \-
\ \(rs
^ \(ha
` \(ga
~ \(ti
────────────────────────────────────────────
Additionally, if a neutral double quote (") is needed in a macro argument, you can
use \(dq to get it. You should not use \(aq for an ordinary apostrophe (as in
“can't”) or \- for an ordinary hyphen (as in “word-aligned”). Review subsection
“Portability” above.
• Do I ever need to use an empty macro argument ("")?
Probably not. When this seems necessary, often a shorter or clearer alternative is
available.
Instead of... ...should be considered.
────────────────────────────────────────────────────────────────
.TP "" .TP
────────────────────────────────────────────────────────────────
.BI "" italic-text bold-text .IB italic-text bold-text
────────────────────────────────────────────────────────────────
.TH foo 1 "" "foo 1.2.3" .TH foo 1 yyyy-mm-dd "foo 1.2.3"
────────────────────────────────────────────────────────────────
.IP "" 4n .IP
────────────────────────────────────────────────────────────────
.IP "" 4n .RS 4n
paragraph .P
... paragraph
... .RE
────────────────────────────────────────────────────────────────
.B one two "" three .B one two three
In the title heading (.TH), the date of the page's last revision is more important
than packaging information; it should not be omitted. Ideally, a page maintainer
will keep both up to date.
.IP is sometimes ill-understood and misused, especially when no marker argument is
supplied—an indentation argument is not required. By setting an explicit
indentation, you may be overriding the reader's preference as set with the -rIN
option. If your page renders adequately without one, use the simpler form. If you
need to indent multiple (unmarked) paragraphs, consider setting an inset region
with .RS and .RE instead.
In the last example, the empty argument does have a subtly different effect than
its suggested replacement: the empty argument causes an additional space character
to be interpolated between the arguments “two” and “three”—but it is a regular
breaking space, so it can be discarded at the end of an output line. It is better
not to be subtle, particularly with space, which can be overlooked in source and
rendered forms.
• .RS doesn't indent relative to my indented paragraph.
The .RS macro sets the left margin; that is, the position at which an ordinary
paragraph (.P and its synonyms) will be set. .IP, .TP, and the deprecated .HP use
the same default indentation. If not given an argument, .RS moves the left margin
by this same amount. To create an inset relative to an indented paragraph, call
.RS repeatedly until an acceptable indentation is achieved, or give .RS an
indentation argument that is at least as much as the paragraph's indentation amount
relative to an adjacent .P paragraph. See subsection “Horizontal and vertical
spacing” above for the values.
Another approach you can use with tagged paragraphs is to place an .RS call
immediately after the paragraph tag; this will also force a break regardless of the
width of the tag, which some authors prefer. Follow-up paragraphs under the tag
can then be set with .P instead of .IP. Remember to use .RE to end the indented
region before starting the next tagged paragraph (at the appropriate nesting
level).
• .RE doesn't move the inset back to the expected level.
• warning: scaling unit invalid in context
• warning: register 'an-saved-marginn' not defined
• warning: register 'an-saved-prevailing-indentn' not defined
The .RS macro takes an indentation amount as an argument; the .RE macro's argument
is a specific inset level. .RE 1 goes to the level before any .RS macros were
called, .RE 2 goes to the level of the first .RS call you made, and so forth. If
you desire symmetry in your macro calls, simply issue one .RE without an argument
for each .RS that precedes it.
After calls to the .SH and .SS sectioning macros, all relative insets are cleared
and calls to .RE have no effect until .RS is used again.
• Do I need to keep typing the indentation in a series of .IP calls?
Not if you don't want to change it. Review subsection “Horizontal and vertical
spacing” above.
Instead of... ...should be considered.
─────────────────────────────────────────────
.IP \(bu 4n .IP \(bu 4n
paragraph paragraph
.IP \(bu 4n .IP \(bu
another-paragraph another-paragraph
─────────────────────────────────────────────
• Why doesn't the package provide a string to insert an ellipsis?
Examples of ellipsis usage are shown above, in subsection “Command synopsis
macros”. The idiomatic roff ellipsis is three dots (periods) with thin space
escape sequences \| internally separating them. Since dots both begin control
lines and are candidate end-of-sentence characters, however, it is sometimes
necessary to prefix and/or suffix an ellipsis with the dummy character escape
sequence \&. That fact stands even if a string is defined to contain the sequence;
further, if the string ends with \&, end-of-sentence detection is defeated when you
use the string at the end of an actual sentence. (Ending a sentence with an
ellipsis is often poor style, but not always.) A hypothetical string EL that
contained an ellipsis, but not the trailing dummy character \&, would then need to
be suffixed with the latter when not ending a sentence.
Instead of... ...do this.
──────────────────────────────────────────────────
.ds EL \&.\|.\|. Arguments are
Arguments are .IR src-file\~ .\|.\|.\&
.IR src-file\~ \*(EL\& .IR dest-dir .
.IR dest-dir .
──────────────────────────────────────────────────
The first column practices a false economy; the savings in typing is offset by the
cost of obscuring even the suggestion of an ellipsis to a casual reader of the
source document, and reduced portability to non-roff man page formatters that
cannot handle string definitions.
There is an ellipsis code point in Unicode, and some fonts have an ellipsis glyph,
which some man pages have accessed in a non-portable way with the font-dependent \N
escape sequence. We discourage the use of these; on terminals, they may crowd the
dots into a half-width character cell, and will not render at all if the output
device doesn't have the glyph. In syntax synopses, missing ellipses can cause
great confusion. Dots and space are universally supported.
Authors
The initial GNU implementation of the man macro package was written by James Clark.
Later, Werner Lemberg ⟨wl@gnu.org⟩ supplied the S, LT, and cR registers, the last a
4.3BSD-Reno mdoc(7) feature. Larry Kollar ⟨kollar@alltel.net⟩ added the FT, HY, and SN
registers; the HF string; and the PT and BT macros. G. Branden Robinson ⟨g.branden
.robinson@gmail.com⟩ implemented the AD and MF strings; CS, CT, and U registers; and the
MR macro. Except for .SB, the extension macros were written by Lemberg, Eric S. Raymond
⟨esr@thyrsus.com⟩, and Robinson.
This document was originally written for the Debian GNU/Linux system by Susan G. Kleinmann
⟨sgk@debian.org⟩. It was corrected and updated by Lemberg and Robinson. The extension
macros were documented by Raymond and Robinson. Raymond also originated the portability
section, to which Ingo Schwarze ⟨schwarze@usta.de⟩ contributed most of the material on
escape sequences.
See also
tbl(1), eqn(1), and refer(1) are preprocessors used with man pages. man(1) describes the
man page librarian on your system. groff_mdoc(7) details the groff version of the BSD-
originated alternative macro package for man pages.
groff_man(7), groff(7), groff_char(7), man(7)