Provided by: hylafax-server_6.0.7-5build1_amd64 
NAME
hfaxd - HylaFAX client-server protocol server
SYNOPSIS
/usr/sbin/hfaxd [ -d ] [ -q dir ] [ -o port ] [ -O ] [ -l bindaddress ] [ -i port ] [ -I ]
[ -s port ] [ -S ]
DESCRIPTION
hfaxd is the HylaFAX program that implements the server portion of:
• the client-server protocol and
• the Simple Network Paging Protocol (SNPP) used to submit message pager jobs to the
IXO/TAP and UCP support.
Additional client-server protocols are planned and hfaxd is intended to be the ``carrier''
through which they are supported.
hfaxd is typically used in one of two ways; either as a standalone process that is started
at system boot time to listen for client connections on one or more ports (in which case
the -i, -o, or -s option must be used), or as a subservient process to the inetd(8)
program. The two forms of use may however be combined so long as the same service is not
provided both by the standalone hfaxd and through inetd.
HYLAFAX (NEW) CLIENT-SERVER PROTOCOL SUPPORT
If hfaxd is started with the -i option it will service clients using the HylaFAX client-
server protocol. This protocol is strongly related to the Internet File Transfer Protocol
(FTP); so much so in fact that FTP client programs that include support for ``quoted
commands'' may be used to communicate with hfaxd using the new protocol. (It should also
be possible to use FTP-aware World Wide Web browsers such as Mosaic and Netscape Navigator
to access HylaFAX servers through the new protocol; but the current format for information
returned in directory listings confuses them.)
The hfaxd server currently recognizes the following protocol requests; case is not
distinguished. Entries marked with a ¹ can be used only when the client has established
administrative privileges with ADMIN.
Request Description
ABOR abort previous command
ACCT specify account (ignored)
ADMIN specify password for administrative privileges
ALLO allocate storage (vacuously)
ANSWER¹ request that call be answered
APPE append to a file
CDUP change to parent of current working directory
CHMOD change mode of a file
CHOWN¹ change owner of a file
CWD change working directory
DELE delete a file
DISABLE¹ disable outbound use of modem
ENABLE¹ enable outbound use of modem
HELP give help information
FILEFMT specify/query format for returning file status
FILESORTFMT specify/query format for sorting file status listing
FORM specify data transfer format
IDLE set idle-timer (in seconds)
JDELE delete done or suspended job
JINTR interrupt job
JKILL kill job
JNEW create new job
JOB set/query current job
JOBFMT specify/query format for returning job status
JOBSORTFMT specify/query format for sorting job status listing
JPARM specify/query job state parameter
JREST reset current job state
JSUBM submit job to scheduler
JSUSP suspend job from scheduling
JWAIT wait for job to complete
JGDELE delete group of jobs
JGKILL kill group of jobs
JGINTR interrupt group of jobs
JGNEW place current job in a new job group
JGPARM set state parameter in a group of jobs
JGREST reset current state for a group of jobs
JGRP set/query current job group
JGSUBM submit group of jobs to scheduler
JGSUSP suspend group of jobs from scheduling
JGWAIT wait for group of jobs to complete
LIST list files in a directory
MDTM show last modification time of file
MODE specify data transfer mode
MDMFMT specify/query format for returning modem status
MDMSORTFMT specify/query format for sorting modem status listing
NLST give name list of files in directory
NOOP do nothing
PASS specify password
PASV prepare for server-to-server transfer
PORT specify data connection port
PWD print the current working directory
QUIT terminate session
RCVFMT specify/query format for returning received facsimile status
RCVSORTFMT specify/query format for sorting received facsimile status listing
REIN reinitiate server state
REST restart incomplete transfer
RETP retrieve the next page in a file
RETR retrieve a file
SHUT schedule server shutdown
SITE non-standard commands (see next section)
SIZE return size of file
STAT return status of server or file
STOR store a file
STOT store a temporary file with a unique name
STOU store a file with a unique name
STRU specify data transfer structure
SYST show operating system type of server system
TYPE specify data transfer type
TZONE specify timezone handling for dates and times
USER specify user name
VRFY verify dialstring handling and/or least-cost routing
The following non-standard or experimental commands are supported through the SITE
request.
Request Description
ADDMODEM¹ add/configure new modem for use
ADDUSER¹ add client access control entry
CONFIG¹ send configuration parameter setting to server
DELMODEM¹ deconfigure/remove modem
DELUSER¹ remove client access control entry
TRIGGER register realtime event trigger
HELP give help information, e.g., SITE HELP
In addition FTP requests that are specified in Internet RFC 959 but not listed here are
recognized, but not implemented.
The hfaxd server will abort an active data transfer only when the ABOR command is preceded
by a Telnet "Interrupt Process" (IP) signal and a Telnet "Synch" signal in the command
Telnet stream, as described in Internet RFC 959. If a STAT command is received during a
data transfer, preceded by a Telnet IP and Synch, transfer status will be returned.
SIMPLE NETWORK PAGING PROTOCOL (SNPP) SUPPORT
If hfaxd is started with the -s option it will service clients using the Simple Network
Pager Protocol (SNPP) as specified in RFC 1861 (which obsoletes RFC 1645).
The hfaxd server currently recognizes the SNPP protocol requests listed below. Requests
marked with a ¹ are non-standard extensions to RFC 1861 that may be added to SNPP at some
future time. Case is not distinguished and only the first four characters of requests are
used in identifying commands.
Request Description
2WAY preface a 2-way transaction
ABOR¹ abort previous command
ACKR set read acknowledgement handling for subsequent requests
ALER set the alter-level for subsequent requests
CALL set the caller-ID for subsequent requests
COVE set the alternate coverage area for subsequent requests
DATA specify a multi-line message
EXPT set the expiration time for subsequent requests
HELP give help information
HOLD set the time at which subsequent requests are to be delivered
KTAG kill a previously submitted request
LEVE set the service level for subsequent requests
LOGI login to server
MCRE specify multiple response text and code
MESS specify a single-line message
MSTA return the status of a previously submitted request
NOQU disable message queueing
PAGE specify the destination pager
PING locate/validate a pager
QUIT terminate session
RESE reset server state
RTYP set the reply type code for subsequent requests
SEND send message(s)
SITE¹ site-specific commands (see next section)
STAT¹ return server status
SUBJ set the message text for subsequent requests
The hfaxd server will abort an active SEND operation when an ABOR command is preceded by a
Telnet "Interrupt Process" (IP) signal and a Telnet "Synch" signal in the command Telnet
stream.
The following non-standard or experimental commands are also supported through the SITE
request.
Request Description
FROMUSER specify the sender's identity
IDLE set idle-timer (in seconds)
JPARM query job parameter status
JQUEUE control whether or not job is queued
LASTTIME set the time to terminate an unfinished job
MAILADDR set the e-mail address to use for notification
MAXDIALS set the maximum number of times to dial the phone
MAXTRIES set the maximum number of times to try sending the page
MODEM set the modem or class of modems to use
NOTIFY set the e-mail notification
RETRYTIME set the time to delay between job retries
SCHEDPRI set the scheduling priority for the job
HELP give help information, e.g., SITE HELP
Note that hfaxd requires that SNPP clients login first with the LOGI directive while RFC
1861 permits clients to submit pages anonymously.
CLIENT ACCESS CONTROL
hfaxd controls client access according to the information in the file
/var/spool/hylafax/etc/hosts.hfaxd. This file defines the set of users and machines that
may receive service and, optionally, defines password challenges to use in authenticating
clients. Clients may be permitted access to services with or without a password
challenge. Access may also be restricted based on the host machine that a request for
service originates from. Consult hosts.hfaxd(5) for information on the format and content
of this file. The SITE ADDUSER protocol request is provided for adding new users to a
server (available only to clients with administrative privileges).
Server resources are controlled based on clients' identities. Jobs and documents, both
received and submitted, are protected by the server. Typically clients are permitted
access to anything they own or that is publicly accessible. There are also administrative
privileges that clients may acquire and which permit them wide access to objects that
reside on the server.
A complete client-server protocol specification is still outstanding.
hfaxd operates with its root directory set to the top of the HylaFAX spooling area;
/var/spool/hylafax. This is done so that clients see a virtual file hierarchy that is
completely contained within the HylaFAX operating environment on the server machine.
Administrators however must be aware of this action when specifying files in the hfaxd
configuration file: absolute pathnames relative to the root of the spooling should be used
to specify filenames.
SERVER ACCESS CONTROL
The file /var/spool/hylafax/etc/shutdown, when present, specifies when to restrict access
to a server machine. When this file is present and contains valid information hfaxd will
permit only users with administrative privileges to access the server. Any other users
that request service will be denied access and negative server responses will include any
shutdown message specified in the shutdown file. Consult hylafax-shutdown(5) for
information on the format and content of this file.
The SHUT protocol request can be used to schedule a server shutdown; it is available only
to clients with administrative privileges. To make a shutdown server available again the
shutdown file can be deleted with the DELE protocol request (this is to be replaced with
an ``unshut'' protocol request so that implementation details are not part of the
protocol).
CONFIGURATION FILES
hfaxd reads configuration information from the file /etc/hylafax/hfaxd.conf each time a
new server process is started (i.e. for each new client). This file uses the same
conventions used by other HylaFAX configuration files; as described in hylafax-config(5).
The following configuration parameters are recognized; items marked ``(SNPP)'' are used
only by the SNPP support.
Tag Type Default Description
AllowSortFormat boolean true Allow client to request sorting formats
FaxContact string see below contact address to show in help text
FileFmt string see below format string for file status results
FileSortFmt string - format string for sorting file status listing
IdleTimeout integer 900 client idle timeout in seconds
JobFmt string see below format string for job status results
JobSortFmt string - format string for sorting job status listing
JobProtection octal 0444 permissions for job qfiles in sendq/doneq
KillTimeMap string see below mapping from service level to job kill time (SNPP)
LogFacility string daemon syslog facility name for tracing messages
MaxAdminAttempts integer 5 maximum admin attempts before disconnecting
MaxConsecutiveBadCmds integer 10 maximum invalid commands before disconnecting
MaxIdleTimeout integer 7200 maximum client idle timeout permitted
MaxLoginAttempts integer 5 maximum login attempts before disconnecting
MaxMsgLength integer 128 maximum pager message length (SNPP)
ModemFmt string see below format string for modem status results
ModemSortFmt string - format string for sorting modem status listing
PagerIDMapFile string /var/spool/hylafax/etc/pagermap name of file for mapping pager IDs (SNPP)
PriorityMap string see below mapping from service level to job priority (SNPP)
PublicJobQ boolean true Allow public listing access to the sendq/doneq
PublicRecvQ boolean true Allow public listing access to the recvq
RcvFmt string see below format string for received facsimile status results
RcvSortFmt string - format string for sorting received facsimile status results listing
RetryTimeMap string see below mapping from service level to job retry time (SNPP)
ServerTracing integer 1 server tracing control vector
ShutdownFile string /var/spool/hylafax/etc/shutdown name of shutdown control file
UserAccessFile string /var/spool/hylafax/etc/hosts.hfaxd name of access control file
XferLogFile string /var/spool/hylafax/etc/clientlog name of file for logging client data transfers
The configuration parameters are explained below:
AllowSortFormat
This controls whether the server accept the *SORTFMT commands which the client
issues to change the server sort the listings.
FaxContact
The e-mail address to display as a point of contact in the help text returned to
a client in response to the HELP or SITE HELP commands. By default this is
``FaxMaster@hostname'', where hostname is the fully qualified name for the
machine where the server is running.
FileFmt The format string to use when returning file status information with the LIST
and STAT commands. Formats are specified using printf(3S) style conventions but
using the field identifiers listed below. Each item can include field width,
precision, left-justification, 0-filling, etc. just as for printf; e.g. %-8p for
an 8-character wide, left-justified, blank-padded field containing the file
protection flags.
Format Description
a Last access time
c Creation time
d Device number (octal)
f Filename
g Group identifier (decimal)
i Inode number (decimal)
l Link count (decimal)
m Last modification time
o Owner (based on file GID)
p Fax-style protection flags (no group bits)
q UNIX-style protection flags
r Root device number (octal)
s File size in bytes (decimal)
u User identifier (decimal)
The default format string is ``%-7p %3l %8o %8s %-12.12m %.48f''. It is
recommended that all items include a field width so that client applications
that construct headers from the format string can constrain the width of column
title strings.
FileSortFmt
The format string to use when sorting the listing for directories using the LIST
command. Follows the FileFmt formatting rules.
IdleTimeout
The initial/default timeout to use in timing out idle clients. This value
defines the maximum amount of time (in seconds) that hfaxd will wait for a
command from a client before terminating the connection. Unprivileged clients
may alter the idle timeout up to the value of MaxIdleTimeout; privileged clients
may set the timeout to any value.
JobFmt The format string to use when returning job status information for jobs in the
sendq and doneq directories. Formats are specified using printf(3S) style
conventions but using the field identifiers listed below. Each item can include
field width, precision, left-justification, 0-filling, etc. just as for printf;
e.g. %-3j for a 3-character wide, left-justified, blank-padded field containing
the job state.
Format Description
A Destination SubAddress
B Destination Password
C Destination company name
D Total # dials/maximum # dials
E Desired signalling rate
F Client-specific tagline format string
G Desired min-scanline time
H Desired data format
I Client-specified scheduling priority
J Client-specified job tag string
K Desired use of ECM
L Destination geographic location
M Notification e-mail address
N Desired use of private tagline (one-character symbol)
O Whether to use continuation cover page (one-character symbol)
P # pages transmitted/total # pages to transmit
Q Client-specified minimum acceptable signalling rate
R Destination person (receiver)
S Sender's identity
T Total # tries/maximum # tries
U Page chopping threshold (inches)
V Job done operation
W Communication identifier
X Job type (one-character symbol)
Y Scheduled date and time
Z Scheduled time in seconds since the UNIX epoch
a Job state (one-character symbol)
b # consecutive failed tries
c Client machine name
d Total # dials
e Public (external) format of dialstring
f # consecutive failed dials
g Group identifier
h Page chop handling (one-character symbol)
i Current scheduling priority
j Job identifier
k Job kill time
l Page length in mm
m Assigned modem
n E-mail notification handling (one-character symbol)
o Job owner
p # pages transmitted
q Job retry time (MM::SS)
r Document resolution in lines/inch
s Job status information from last failure
t Total # tries attempted
u Maximum # tries
v Client-specified dialstring
w Page width in mm
x Maximum # dials
y Total # pages to transmit
z Time to send job
The default format string is ``%-4j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s''.
This string constrains each status line to be less than 80 characters. It is
recommended that all items include a field width so that client applications,
such as faxstat(1) that construct headers from the format string can constrain
the width of column title strings.
JobSortFmt
The format string to use when sorting the listing for jobs in the sendq and
doneq directories. Follows the JobFmt formatting rules.
JobProtection
The file mode setting for job qfiles in the HylaFAX queues (sendq and doneq).
The default setting of ``0644'' allows all users to view all job parameters in
the send/done queues. If PublicJobQ is set to false, then this file mode
determines the permissions of the clients to see the jobs, following the HylaFAX
permission model of the group bits controlling uid permissions and the other
bits controlling other permissions.
KillTimeMap
The mapping from SNPP service level (0-11) to job expiration time (kill time).
A mapping is specified as a string of space-separate numbers where each value is
the number of minutes to permit a job to run. The default mapping is ``5 5 5 15
60 240 720 1440 1440 1440 1440 1440'' which expires a job in 5 minutes for
service levels 0-2, 15 minutes for level three, 60 minutes for level four, etc.
LogFacility
The symbolic name for the syslog(3) facility to use when logging error messages
and informational/debugging messages requested through the ServerTracing
parameter. The list of facility names is found in the system include file
<syslog.h>; comparisons are case-insensitive.
MaxAdminAttempts
The maximum number of unsuccessful attempts gain administrative privileges with
the ADMIN command that hfaxd will permit a client before terminating the
connection. Note that the count of attempts is reset if/when the client
successfully gains administrative privileges.
MaxConsecutiveBadCmds
The maximum number of consecutive unrecognized, unimplemented, syntactically
incorrect, or otherwise unacceptable commands to permit a client before
terminating the connection. This control has two purposes: to handle naive or
malicious clients from sending long streams of nonsense commands to a server,
and to insure that clients are forcibly terminated when a server is marked
shutdown.
MaxIdleTimeout
The maximum value that a client may set the idle timeout to. This value is not
enforced if the client has administrative privileges.
MaxLoginAttempts
The maximum number of unsuccessful attempts to login with the USER and PASS
commands that hfaxd will permit a client before terminating the connection.
MaxMsgLength
The maximum number of characters to accept in a pager message specified with the
DATA or MESS commands. Messages longer than this value are rejected.
ModemFmt The format string to use when returning modem status information for modems
listed in the status directory. Formats are specified using printf(3S) style
conventions but using the field identifiers listed below. Each item can include
field width, precision, left-justification, 0-filling, etc. just as for printf;
e.g. %-8h for an 8-character wide, left-justified, blank-padded field containing
the name of the host the server is running on.
Format Description
h Server hostname
l Local identifier string
m Canonical modem name
n FAX phone number
r Maximum pages that can be received in a single call
s Status information string
t Server and session tracing levels (xxxxx:yyyyy)
v Modem speaker volume as one-character symbol
z A ``*'' if a faxgetty(8) process is running; otherwise `` '' (space)
The default format string is ``Modem %m (%n): %s''.
ModemSortFmt
The format string to use when sorting the listsin for modem status information
in the status directory.
PagerIDMapFile
The absolute pathname of the file that contains directions for mapping pager
identifiers to IXO/TAP or UCP service providers (and optionally a pager
identification number). Consult pagermap(5) for information on the format and
content of this file. (Note that absolute pathnames are relative to the root of
the spooling area).
PriorityMap
The mapping from SNPP service level (0-11) to job scheduling priority. A
mapping is specified as a string of space-separate numbers where each value is
the priority to assign to a job. The default mapping is ``63 127 127 127 127
127 127 127 127 127 127 127'' which assigns a high priority to service level
zero and normal (default) priority to all other service levels.
PublicJobQ
By default, HylaFAX has always made the listings of the sendq/doneq include all
jobs to any client connected to hfaxd. By setting this to false, hfaxd will
also enforce it's normal access restrictions on the listing of jobs in the
sendq/doneq. These access restrictions are based on the file mode (see
JobProtection ) and the logged in uid (see hosts.hfaxd )
PublicRecvQ
By default, HylaFAX has always made the listings of the recvq include all faxes
to any client connected to hfaxd. By setting this to false, hfaxd will also
enforce it's normal access restrictions on the listing of faxes in the recvq.
These access restrictions are based on the file mode faxgetty (and it's related
FaxDispatch ) set for the fax, and the logged in uid (see hosts.hfaxd )
RcvFmt The format string to use when returning status information for received
facsimile in the recvq directory. Formats are specified using printf(3S) style
conventions but using the field identifiers listed below. Each item can include
field width, precision, left-justification, 0-filling, etc. just as for printf;
e.g. %-3b for a 3-character wide, left-justified, blank-padded field containing
the signalling rate.
Format Description
a SubAddress received from sender (if any)
b Signalling rate used during receive
d Data format used during receive
e Error description if an error occurred during receive
f Document filename (relative to the recvq directory)
h Time spent receiving document (HH:MM:SS)
l Page length in mm
m Fax-style protection mode string (``-rwxrwx'')
n File size (number of bytes)
o File owner
p Number of pages in document
q UNIX-style protection flags
r Resolution of received data
s Sender identity (TSI)
t Compact representation of the time when the receive happened
w Page width in mm
z A ``*'' if receive is going on; otherwise `` '' (space)
The default format string is ``%-7m %4p%1z %-8.8o %14.14s %7t %f''. This string
constrains each status line to be less than 80 characters. It is recommended
that all items include a field width so that client applications, such as
faxstat(1) that construct headers from the format string can constrain the width
of column title strings.
RcvSortFmt
The format string to use when sorting the listing for received facsimile in the
recvq directory. Follows the RcvFmt formatting rules.
RetryTimeMap
The mapping from SNPP service level (0-11) to job retry time. A mapping is
specified as a string of space-separate numbers where each value is the number
of seconds to delay between delivery attempts. A value of zero causes retries
to be scheduled using the default algorithm used by the HylaFAX job scheduler.
The default mapping is ``30 60 60 180 0 0 0 0 0 0 0 0'' which retries a level 0
job after a 30 second delay, levels 1 and 2 after 60 seconds, level 3 after 3
minutes, and other jobs are retried according to the usual scheduling algorithm.
ServerTracing
A number that controls the generation of tracing information by a server. areas
that are individually controlled. To enable tracing of multiple areas of
operation, the flag associated with each area should be bit-or'd to form the
value for this tag.
Flag Description
1 (0x00001) General server operation
2 (0x00002) Client-server protocol requests and responses
4 (0x00004) File transfers from client to server
8 (0x00008) File transfers from server to client
16 (0x00010) Client logins
32 (0x00020) All network connections
64 (0x00040) FIFO messages to and from faxq(8)
128 (0x00080) TIFF Library errors and warnings
256 (0x00100) Configuration file processing
Tracing messages are directed to syslog(3) using the facility specified with the
LogFacility configuration parameter. Note that syslogd(8) must be configured to
capture facility.info, facility.debug, facility.warning, and facility.err
messages.
ShutdownFile
The absolute pathname of the server shutdown file; see hylafax-shutdown(5) for
information on the format and content of this file. (Note that absolute
pathnames are relative to the root of the spooling area).
UserAccessFile
The absolute pathname of the user access control file; see hosts.hfaxd(5) for
information on the format and content of this file. (Note that absolute
pathnames are relative to the root of the spooling area).
XferLogFile
The absolute pathname of the file to use for logging client-server file
transfers (when enabled through the ServerTracing parameter). (Note that
absolute pathnames are relative to the root of the spooling area).
OPTIONS
-q dir The specified directory is treated as the spooling area. The default spooling
area, /var/spool/hylafax, is defined at the time the software is built.
-d Stop hfaxd from detaching itself from the controlling terminal. This option is
normally used only when running hfaxd under a debugger or when hfaxd is started
up from the inetd(8) process.
-l bindaddress
Bind to the specified bindaddress the tcp port. Please note that this argument
need to be specified before the -i otherwise it will be ignored. A better
approach to improve security would be to run hfaxd from xinetd, binding its
service to the specific port. This will also make hylafax benefits from tcp
wrappers and other options provided by xinetd.
-i port Listen on the specified port for service requests and respond with the client-
server protocol. The port may be specified either symbolically, e.g.
``hylafax'' or numerically. This flag may be specified multiple times to
request service on multiple different ports. Each time this flag is specified,
it will listen on the specified port, bound to the last -l bindaddress
specified. If no -l bindaddress was specified, it will bind to the system
configured default wildcard address, which could be any of IPv6, or IPv4, or
both.
-s port Listen on the specified port for service requests and respond with the Simple
Network Paging (SNPP) protocol. The port may be specified either symbolically,
e.g. ``snpp'' or numerically. This flag may be specified multiple times to
request service on multiple different ports.
-I Service the client-server protocol using the standard input and output. This
option is useful when hfaxd is started up by inetd(8).
-S Service the Simple Network Paging (SNPP) protocol using the standard input and
output. This option is useful when hfaxd is started up by inetd(8).
DIAGNOSTICS
Diagnostics generated by hfaxd are logged using syslog(3).
FILES
/etc/hylafax/hfaxd.conf server configuration file
/var/spool/hylafax spooling area
/var/spool/hylafax/FIFO for submitting the job
/var/spool/hylafax/sendq where job description is placed
/var/spool/hylafax/sendq/seqf for assigning job identifiers
/var/spool/hylafax/docq/seqf for assigning document identifiers
/var/spool/hylafax/tmp temporary location of job-related files
/var/spool/hylafax/docq where document files are placed
/var/spool/hylafax/recvq where received facsimile are found
/var/spool/hylafax/archive where archived jobs are placed
/var/spool/hylafax/log for server log files
/var/spool/hylafax/client for FIFO files used in communicating with faxq
/var/spool/hylafax/status for server status information
/var/spool/hylafax/config.device for returning server status
/var/spool/hylafax/etc/hosts.hfaxd host access control list
/var/spool/hylafax/etc/shutdown server shutdown control
/var/spool/hylafax/etc/pagermap SNPP pager ID mapping file
BUGS
To be filled in.
SEE ALSO
sendfax(1), sendpage(1), faxalter(1), faxrm(1), faxstat(1), faxq(8), syslog(3) hylafax-
server(5), hosts.hfaxd(5), status(5), hylafax-shutdown(5),
July 12, 1996 HFAXD(8)