Provided by: atlc_4.6.1-5_amd64 
NAME
create_bmp_for_symmetrical_stripline - bitmap generator for thin conductor between two
infinite groundplanes (part of atlc)
SYNOPSIS
create_bmp_for_symmetrical_stripline [-v] W H w bitmapfile
WARNING
This man page is not a complete set of documentation - the complexity of the atlc project
makes man pages not an ideal way to document it, although out of completeness, man pages
are produced. The best documentation that was current at the time the version was
produced should be found on your hard drive, usually at
/usr/local/share/atlc/docs/html-docs/index.html
although it might be elsewhere if your system administrator chose to install the package
elsewhere. Sometimes, errors are corrected in the documentation and placed at
http://atlc.sourceforge.net/ before a new release of atlc is released. Please, if you
notice a problem with the documentation - even spelling errors and typos, please let me
know.
DESCRIPTION
create_bmp_for_symmetrical_stripline is a pre-processor for atlc, the finite difference
program that is used to calculate the properties of a two-conductor electrical
transmission line of arbitrary cross section. The program
create_bmp_for_symmetrical_stripline is used as a fast way of generating bitmaps (there is
no need to use a graphics program), for a 1 pixel thick conductor of width w, centrally
located inside a pair of groundplanes of width W and separation H. This has an exact
analytical answer, when the inner is infinitely thin and the width W is infinitely wide.
This theoretical impedance is also calculated by the create_bmp_for_symmetrical_stripline.
It is therefore used as a test of atlc.
----------------------------------------------------- ^
| | |
| | |
| <----------w-----------> | |
| | H
| | |
| | |
----------------------------------------------------- v
<-------------------------W------------------------->
The parameters 'W' and 'H' and the inner dimensions of the outer conductor. The outer
dimensions of the inner conductor are 'w' and 'c'. The inner conductor is assumed to rest
on a dielectric (Er2) which is 'd' wide and outer conductor an the inner conductor is
offset 'b' from the left hand sidewall of the outer conductor. The whole region is
surrounded by a dielectric of relative permittivity 'Er1'. The dielectrics 'Er1' and then
'Er1' and 'Er2' will both be 1.0
The bitmaps produced by create_bmp_for_symmetrical_stripline are 24-bit bit colour
bitmaps, as are required by atlc. Currently create_bmp_for_symmetrical_stripline only
produces bitmaps with white (vacuum) dielectrics.
OPTIONS
-v
Print the theoeretical impedance Zo. This only works if the width W is sufficiently wide,
otherwise atlc and the value printed here would disagree wildly.
SEE ALSO
atlc(1) create_bmp_for_circ_in_circ(1) create_bmp_for_circ_in_rect(1)
create_bmp_for_microstrip_coupler(1) create_bmp_for_rect_cen_in_rect(1)
create_bmp_for_rect_cen_in_rect_coupler(1) create_bmp_for_rect_in_circ(1)
create_bmp_for_rect_in_rect(1) create_bmp_for_stripline_coupler(1) design_coupler(1)
find_optimal_dimensions_for_microstrip_coupler(1) readbin(1)
http://atlc.sourceforge.net - Home page
http://sourceforge.net/projects/atlc - Download area
atlc-X.Y.Z/docs/html-docs/index.html - HTML docs
atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
atlc-X.Y.Z/examples - examples
Dr. David Kirkby atlc-4.6.0 8th Decembercreate_bmp_for_symmetrical_stripline(1)