Provided by: bind9-utils_9.18.24-0ubuntu0.23.10.1_amd64 
NAME
dnssec-keyfromlabel - DNSSEC key generation tool
SYNOPSIS
dnssec-keyfromlabel {-l label} [-3] [-a algorithm] [-A date/offset] [-c class] [-D
date/offset] [-D sync date/offset] [-E engine] [-f flag] [-G] [-I date/offset] [-i
interval] [-k] [-K directory] [-L ttl] [-n nametype] [-P date/offset] [-P sync
date/offset] [-p protocol] [-R date/offset] [-S key] [-t type] [-v level] [-V] [-y] {name}
DESCRIPTION
dnssec-keyfromlabel generates a pair of key files that reference a key object stored in a
cryptographic hardware service module (HSM). The private key file can be used for DNSSEC
signing of zone data as if it were a conventional signing key created by dnssec-keygen,
but the key material is stored within the HSM and the actual signing takes place there.
The name of the key is specified on the command line. This must match the name of the zone
for which the key is being generated.
OPTIONS
-a algorithm
This option selects the cryptographic algorithm. The value of algorithm must be one
of RSASHA1, NSEC3RSASHA1, RSASHA256, RSASHA512, ECDSAP256SHA256, ECDSAP384SHA384,
ED25519, or ED448.
These values are case-insensitive. In some cases, abbreviations are supported, such
as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384. If RSASHA1 is
specified along with the -3 option, then NSEC3RSASHA1 is used instead.
This option is mandatory except when using the -S option, which copies the
algorithm from the predecessory key.
Changed in version 9.12.0: The default value RSASHA1 for newly generated keys was
removed.
-3 This option uses an NSEC3-capable algorithm to generate a DNSSEC key. If this
option is used with an algorithm that has both NSEC and NSEC3 versions, then the
NSEC3 version is used; for example, dnssec-keygen -3a RSASHA1 specifies the
NSEC3RSASHA1 algorithm.
-E engine
This option specifies the cryptographic hardware to use.
When BIND 9 is built with OpenSSL, this needs to be set to the OpenSSL engine
identifier that drives the cryptographic accelerator or hardware service module
(usually pkcs11).
-l label
This option specifies the label for a key pair in the crypto hardware.
When BIND 9 is built with OpenSSL-based PKCS#11 support, the label is an arbitrary
string that identifies a particular key. It may be preceded by an optional OpenSSL
engine name, followed by a colon, as in pkcs11:keylabel.
-n nametype
This option specifies the owner type of the key. The value of nametype must either
be ZONE (for a DNSSEC zone key (KEY/DNSKEY)), HOST or ENTITY (for a key associated
with a host (KEY)), USER (for a key associated with a user (KEY)), or OTHER
(DNSKEY). These values are case-insensitive.
-C This option enables compatibility mode, which generates an old-style key, without
any metadata. By default, dnssec-keyfromlabel includes the key's creation date in
the metadata stored with the private key; other dates may be set there as well,
including publication date, activation date, etc. Keys that include this data may
be incompatible with older versions of BIND; the -C option suppresses them.
-c class
This option indicates that the DNS record containing the key should have the
specified class. If not specified, class IN is used.
-f flag
This option sets the specified flag in the flag field of the KEY/DNSKEY record.
The only recognized flags are KSK (Key-Signing Key) and REVOKE.
-G This option generates a key, but does not publish it or sign with it. This option
is incompatible with -P and -A.
-h This option prints a short summary of the options and arguments to
dnssec-keyfromlabel.
-K directory
This option sets the directory in which the key files are to be written.
-k This option generates KEY records rather than DNSKEY records.
-L ttl This option sets the default TTL to use for this key when it is converted into a
DNSKEY RR. This is the TTL used when the key is imported into a zone, unless there
was already a DNSKEY RRset in place, in which case the existing TTL would take
precedence. Setting the default TTL to 0 or none removes it.
-p protocol
This option sets the protocol value for the key. The protocol is a number between 0
and 255. The default is 3 (DNSSEC). Other possible values for this argument are
listed in RFC 2535 and its successors.
-S key This option generates a key as an explicit successor to an existing key. The name,
algorithm, size, and type of the key are set to match the predecessor. The
activation date of the new key is set to the inactivation date of the existing one.
The publication date is set to the activation date minus the prepublication
interval, which defaults to 30 days.
-t type
This option indicates the type of the key. type must be one of AUTHCONF,
NOAUTHCONF, NOAUTH, or NOCONF. The default is AUTHCONF. AUTH refers to the ability
to authenticate data, and CONF to the ability to encrypt data.
-v level
This option sets the debugging level.
-V This option prints version information.
-y This option allows DNSSEC key files to be generated even if the key ID would
collide with that of an existing key, in the event of either key being revoked.
(This is only safe to enable if RFC 5011 trust anchor maintenance is not used with
either of the keys involved.)
TIMING OPTIONS
Dates can be expressed in the format YYYYMMDD or YYYYMMDDHHMMSS (which is the format used
inside key files), or 'Day Mon DD HH:MM:SS YYYY' (as printed by dnssec-settime -p), or
UNIX epoch time (as printed by dnssec-settime -up), or the literal now.
The argument can be followed by + or - and an offset from the given time. The literal now
can be omitted before an offset. The offset can be followed by one of the suffixes y, mo,
w, d, h, or mi, so that it is computed in years (defined as 365 24-hour days, ignoring
leap years), months (defined as 30 24-hour days), weeks, days, hours, or minutes,
respectively. Without a suffix, the offset is computed in seconds.
To explicitly prevent a date from being set, use none, never, or unset.
All these formats are case-insensitive.
-P date/offset
This option sets the date on which a key is to be published to the zone. After that
date, the key is included in the zone but is not used to sign it. If not set, and
if the -G option has not been used, the default is the current date.
sync date/offset
This option sets the date on which CDS and CDNSKEY records that match this
key are to be published to the zone.
-A date/offset
This option sets the date on which the key is to be activated. After that date, the
key is included in the zone and used to sign it. If not set, and if the -G option
has not been used, the default is the current date.
-R date/offset
This option sets the date on which the key is to be revoked. After that date, the
key is flagged as revoked. It is included in the zone and is used to sign it.
-I date/offset
This option sets the date on which the key is to be retired. After that date, the
key is still included in the zone, but it is not used to sign it.
-D date/offset
This option sets the date on which the key is to be deleted. After that date, the
key is no longer included in the zone. (However, it may remain in the key
repository.)
sync date/offset
This option sets the date on which the CDS and CDNSKEY records that match
this key are to be deleted.
-i interval
This option sets the prepublication interval for a key. If set, then the
publication and activation dates must be separated by at least this much time. If
the activation date is specified but the publication date is not, the publication
date defaults to this much time before the activation date; conversely, if the
publication date is specified but not the activation date, activation is set to
this much time after publication.
If the key is being created as an explicit successor to another key, then the
default prepublication interval is 30 days; otherwise it is zero.
As with date offsets, if the argument is followed by one of the suffixes y, mo, w,
d, h, or mi, the interval is measured in years, months, weeks, days, hours, or
minutes, respectively. Without a suffix, the interval is measured in seconds.
GENERATED KEY FILES
When dnssec-keyfromlabel completes successfully, it prints a string of the form
Knnnn.+aaa+iiiii to the standard output. This is an identification string for the key
files it has generated.
• nnnn is the key name.
• aaa is the numeric representation of the algorithm.
• iiiii is the key identifier (or footprint).
dnssec-keyfromlabel creates two files, with names based on the printed string.
Knnnn.+aaa+iiiii.key contains the public key, and Knnnn.+aaa+iiiii.private contains the
private key.
The .key file contains a DNS KEY record that can be inserted into a zone file (directly or
with an $INCLUDE statement).
The .private file contains algorithm-specific fields. For obvious security reasons, this
file does not have general read permission.
SEE ALSO
dnssec-keygen(8), dnssec-signzone(8), BIND 9 Administrator Reference Manual, RFC 4034, RFC
7512.
AUTHOR
Internet Systems Consortium
COPYRIGHT
2024, Internet Systems Consortium