Provided by: dpkg_1.22.0ubuntu1.1_amd64 
NAME
dpkg - package manager for Debian
SYNOPSIS
dpkg [option...] action
WARNING
This manual is intended for users wishing to understand dpkg's command line options and
package states in more detail than that provided by dpkg --help.
It should not be used by package maintainers wishing to understand how dpkg will install
their packages. The descriptions of what dpkg does when installing and removing packages
are particularly inadequate.
DESCRIPTION
dpkg is a medium-level tool to install, build, remove and manage Debian packages. The
primary and more user-friendly front-end for dpkg as a CLI (command-line interface) is
apt(8) and as a TUI (terminal user interface) is aptitude(8). dpkg itself is controlled
entirely via command line parameters, which consist of exactly one action and zero or more
options. The action-parameter tells dpkg what to do and options control the behavior of
the action in some way.
dpkg can also be used as a front-end to dpkg-deb(1) and dpkg-query(1). The list of
supported actions can be found later on in the ACTIONS section. If any such action is
encountered dpkg just runs dpkg-deb or dpkg-query with the parameters given to it, but no
specific options are currently passed to them, to use any such option the back-ends need
to be called directly.
INFORMATION ABOUT PACKAGES
dpkg maintains some usable information about available packages. The information is
divided in three classes: states, selection states and flags. These values are intended to
be changed mainly with dselect.
Package states
not-installed
The package is not installed on your system.
config-files
Only the configuration files or the postrm script and the data it needs to remove of
the package exist on the system.
half-installed
The installation of the package has been started, but not completed for some reason.
unpacked
The package is unpacked, but not configured.
half-configured
The package is unpacked and configuration has been started, but not yet completed for
some reason.
triggers-awaited
The package awaits trigger processing by another package.
triggers-pending
The package has been triggered.
installed
The package is correctly unpacked and configured.
Package selection states
install
The package is selected for installation.
hold
A package marked to be on hold is kept on the same version, that is, no automatic new
installs, upgrades or removals will be performed on them, unless these actions are
requested explicitly, or are permitted to be done automatically with the --force-hold
option.
deinstall
The package is selected for deinstallation (i.e. we want to remove all files, except
configuration files).
purge
The package is selected to be purged (i.e. we want to remove everything from system
directories, even configuration files).
unknown
The package selection is unknown. A package that is also in a not-installed state,
and with an ok flag will be forgotten in the next database store.
Package flags
ok A package marked ok is in a known state, but might need further processing.
reinstreq
A package marked reinstreq is broken and requires reinstallation. These packages
cannot be removed, unless forced with option --force-remove-reinstreq.
ACTIONS
-i, --install package-file...
Install the package. If --recursive or -R option is specified, package-file must refer
to a directory instead.
Installation consists of the following steps:
1. Extract the control files of the new package.
2. If another version of the same package was installed before the new installation,
execute prerm script of the old package.
3. Run preinst script, if provided by the package.
4. Unpack the new files, and at the same time back up the old files, so that if
something goes wrong, they can be restored.
5. If another version of the same package was installed before the new installation,
execute the postrm script of the old package. Note that this script is executed
after the preinst script of the new package, because new files are written at the
same time old files are removed.
6. Configure the package. See --configure for detailed information about how this is
done.
--unpack package-file...
Unpack the package, but don't configure it. If --recursive or -R option is specified,
package-file must refer to a directory instead.
Will process triggers for Pre-Depends unless --no-triggers has been specified.
--configure package...|-a|--pending
Configure a package which has been unpacked but not yet configured. If -a or
--pending is given instead of package, all unpacked but unconfigured packages are
configured.
To reconfigure a package which has already been configured, try the dpkg-
reconfigure(8) command instead (which is part of the debconf project).
Configuring consists of the following steps:
1. Unpack the conffiles, and at the same time back up the old conffiles, so that they
can be restored if something goes wrong.
2. Run postinst script, if provided by the package.
Will process triggers unless --no-triggers has been specified.
--triggers-only package...|-a|--pending
Processes only triggers (since dpkg 1.14.17). All pending triggers will be processed.
If package names are supplied only those packages' triggers will be processed, exactly
once each where necessary. Use of this option may leave packages in the improper
triggers-awaited and triggers-pending states. This can be fixed later by running: dpkg
--configure --pending.
-r, --remove package...|-a|--pending
Remove an installed package. This removes everything except conffiles and other data
cleaned up by the postrm script, which may avoid having to reconfigure the package if
it is reinstalled later (conffiles are configuration files that are listed in the
DEBIAN/conffiles control file). If there is no DEBIAN/conffiles control file nor
DEBIAN/postrm script, this command is equivalent to calling --purge. If -a or
--pending is given instead of a package name, then all packages unpacked, but marked
to be removed in file /var/lib/dpkg/status, are removed.
Removing of a package consists of the following steps:
1. Run prerm script.
2. Remove the installed files.
3. Run postrm script.
Will process triggers unless --no-triggers has been specified.
-P, --purge package...|-a|--pending
Purge an installed or already removed package. This removes everything, including
conffiles, and anything else cleaned up from postrm. If -a or --pending is given
instead of a package name, then all packages unpacked or removed, but marked to be
purged in file /var/lib/dpkg/status, are purged.
Note: Some configuration files might be unknown to dpkg because they are created and
handled separately through the configuration scripts. In that case, dpkg won't remove
them by itself, but the package's postrm script (which is called by dpkg), has to take
care of their removal during purge. Of course, this only applies to files in system
directories, not configuration files written to individual users' home directories.
Purging of a package consists of the following steps:
1. Remove the package, if not already removed. See --remove for detailed information
about how this is done.
2. Run postrm script.
Will process triggers unless --no-triggers has been specified.
-V, --verify [package-name...]
Verifies the integrity of package-name or all packages if omitted, by comparing
information from the files installed by a package with the files metadata information
stored in the dpkg database (since dpkg 1.17.2). The origin of the files metadata
information in the database is the binary packages themselves. That metadata gets
collected at package unpack time during the installation process.
Currently the only functional check performed is an md5sum verification of the file
contents against the stored value in the files database. It will only get checked if
the database contains the file md5sum. To check for any missing metadata in the
database, the --audit command can be used. This is only an integrity check and should
not be considered as any kind of security verification.
The output format is selectable with the --verify-format option, which by default uses
the rpm format, but that might change in the future, and as such, programs parsing
this command output should be explicit about the format they expect.
-C, --audit [package-name...]
Performs database sanity and consistency checks for package-name or all packages if
omitted (per package checks since dpkg 1.17.10). For example, searches for packages
that have been installed only partially on your system or that have missing, wrong or
obsolete control data or files. dpkg will suggest what to do with them to get them
fixed.
--update-avail [Packages-file]
--merge-avail [Packages-file]
Update dpkg's and dselect's idea of which packages are available. With action
--merge-avail, old information is combined with information from Packages-file. With
action --update-avail, old information is replaced with the information in the
Packages-file. The Packages-file distributed with Debian is simply named «Packages».
If the Packages-file argument is missing or named «-» then it will be read from
standard input (since dpkg 1.17.7). dpkg keeps its record of available packages in
/var/lib/dpkg/available.
A simpler one-shot command to retrieve and update the available file is dselect
update. Note that this file is mostly useless if you don't use dselect but an APT-
based frontend: APT has its own system to keep track of available packages.
-A, --record-avail package-file...
Update dpkg and dselect's idea of which packages are available with information from
the package package-file. If --recursive or -R option is specified, package-file must
refer to a directory instead.
--forget-old-unavail
Now obsolete and a no-op as dpkg will automatically forget uninstalled unavailable
packages (since dpkg 1.15.4), but only those that do not contain user information such
as package selections.
--clear-avail
Erase the existing information about what packages are available.
--get-selections [package-name-pattern...]
Get list of package selections, and write it to stdout. Without a pattern, non-
installed packages (i.e. those which have been previously purged) will not be shown.
--set-selections
Set package selections using file read from stdin. This file should be in the format
“package state”, where state is one of install, hold, deinstall or purge. Blank lines
and comment lines beginning with ‘#’ are also permitted.
The available file needs to be up-to-date for this command to be useful, otherwise
unknown packages will be ignored with a warning. See the --update-avail and
--merge-avail commands for more information.
--clear-selections
Set the requested state of every non-essential package to deinstall (since dpkg
1.13.18). This is intended to be used immediately before --set-selections, to
deinstall any packages not in list given to --set-selections.
--yet-to-unpack
Searches for packages selected for installation, but which for some reason still
haven't been installed.
Note: This command makes use of both the available file and the package selections.
--predep-package
Print a single package which is the target of one or more relevant pre-dependencies
and has itself no unsatisfied pre-dependencies.
If such a package is present, output it as a Packages file entry, which can be
massaged as appropriate.
Note: This command makes use of both the available file and the package selections.
Returns 0 when a package is printed, 1 when no suitable package is available and 2 on
error.
--add-architecture architecture
Add architecture to the list of architectures for which packages can be installed
without using --force-architecture (since dpkg 1.16.2). The architecture dpkg is
built for (i.e. the output of --print-architecture) is always part of that list.
--remove-architecture architecture
Remove architecture from the list of architectures for which packages can be installed
without using --force-architecture (since dpkg 1.16.2). If the architecture is
currently in use in the database then the operation will be refused, except if
--force-architecture is specified. The architecture dpkg is built for (i.e. the output
of --print-architecture) can never be removed from that list.
--print-architecture
Print architecture of packages dpkg installs (for example, “i386”).
--print-foreign-architectures
Print a newline-separated list of the extra architectures dpkg is configured to allow
packages to be installed for (since dpkg 1.16.2).
--assert-help
Give help about the --assert-feature options (since dpkg 1.21.0).
--assert-feature
Asserts that dpkg supports the requested feature. Returns 0 if the feature is fully
supported, 1 if the feature is known but dpkg cannot provide support for it yet, and 2
if the feature is unknown. The current list of assertable features is:
support-predepends
Supports the Pre-Depends field (since dpkg 1.1.0).
working-epoch
Supports epochs in version strings (since dpkg 1.4.0.7).
long-filenames
Supports long filenames in deb(5) archives (since dpkg 1.4.1.17).
multi-conrep
Supports multiple Conflicts and Replaces (since dpkg 1.4.1.19).
multi-arch
Supports multi-arch fields and semantics (since dpkg 1.16.2).
versioned-provides
Supports versioned Provides (since dpkg 1.17.11).
protected-field
Supports the Protected field (since dpkg 1.20.1).
--validate-thing string
Validate that the thing string has a correct syntax (since dpkg 1.18.16). Returns 0
if the string is valid, 1 if the string is invalid but might be accepted in lax
contexts, and 2 if the string is invalid. The current list of validatable things is:
pkgname
Validates the given package name (since dpkg 1.18.16).
trigname
Validates the given trigger name (since dpkg 1.18.16).
archname
Validates the given architecture name (since dpkg 1.18.16).
version
Validates the given version (since dpkg 1.18.16).
--compare-versions ver1 op ver2
Compare version numbers, where op is a binary operator. dpkg returns true (0) if the
specified condition is satisfied, and false (1) otherwise. There are two groups of
operators, which differ in how they treat an empty ver1 or ver2. These treat an empty
version as earlier than any version: lt le eq ne ge gt. These treat an empty version
as later than any version: lt-nl le-nl ge-nl gt-nl. These are provided only for
compatibility with control file syntax: < << <= = >= >> >. The < and > operators are
obsolete and should not be used, due to confusing semantics. To illustrate: 0.1 < 0.1
evaluates to true.
-?, --help
Display a brief help message.
--force-help
Give help about the --force-thing options.
-Dh, --debug=help
Give help about debugging options.
--version
Display dpkg version information.
When used with --robot, the output will be the program version number in a dotted
numerical format, with no newline.
dpkg-deb actions
See dpkg-deb(1) for more information about the following actions, and other actions
and options not exposed by the dpkg front-end.
-b, --build directory [archive|directory]
Build a deb package.
-c, --contents archive
List contents of a deb package.
-e, --control archive [directory]
Extract control-information from a package.
-x, --extract archive directory
Extract the files contained by package.
-X, --vextract archive directory
Extract and display the filenames contained by a package.
-f, --field archive [control-field...]
Display control field(s) of a package.
--ctrl-tarfile archive
Output the control tar-file contained in a Debian package.
--fsys-tarfile archive
Output the filesystem tar-file contained by a Debian package.
-I, --info archive [control-file...]
Show information about a package.
dpkg-query actions
See dpkg-query(1) for more information about the following actions, and other actions
and options not exposed by the dpkg front-end.
-l, --list package-name-pattern...
List packages matching given pattern.
-s, --status package-name...
Report status of specified package.
-L, --listfiles package-name...
List files installed to your system from package-name.
-S, --search filename-search-pattern...
Search for a filename from installed packages.
-p, --print-avail package-name...
Display details about package-name, as found in /var/lib/dpkg/available. Users of
APT-based frontends should use apt show package-name instead.
OPTIONS
All options can be specified both on the command line and in the dpkg configuration file
/etc/dpkg/dpkg.cfg or fragment files (with names matching this shell pattern
'[0-9a-zA-Z_-]*') on the configuration directory /etc/dpkg/dpkg.cfg.d/. Each line in the
configuration file is either an option (exactly the same as the command line option but
without leading hyphens) or a comment (if it starts with a ‘#’).
--abort-after=number
Change after how many errors dpkg will abort. The default is 50.
-B, --auto-deconfigure
When a package is removed, there is a possibility that another installed package
depended on the removed package. Specifying this option will cause automatic
deconfiguration of the package which depended on the removed package.
-Doctal, --debug=octal
Switch debugging on. octal is formed by bitwise-ORing desired values together from the
list below (note that these values may change in future releases). -Dh or --debug=help
display these debugging values.
Number Description
1 Generally helpful progress information
2 Invocation and status of maintainer scripts
10 Output for each file processed
100 Lots of output for each file processed
20 Output for each configuration file
200 Lots of output for each configuration file
40 Dependencies and conflicts
400 Lots of dependencies/conflicts output
10000 Trigger activation and processing
20000 Lots of output regarding triggers
40000 Silly amounts of output regarding triggers
1000 Lots of drivel about for example the dpkg/info dir
2000 Insane amounts of drivel
--force-things
--no-force-things, --refuse-things
Force or refuse (no-force and refuse mean the same thing) to do some things. things is
a comma separated list of things specified below. --force-help displays a message
describing them. Things marked with (*) are forced by default.
Warning: These options are mostly intended to be used by experts only. Using them
without fully understanding their effects may break your whole system.
all:
Turns on (or off) all force options.
downgrade(*):
Install a package, even if newer version of it is already installed.
Warning: At present dpkg does not do any dependency checking on downgrades and
therefore will not warn you if the downgrade breaks the dependency of some other
package. This can have serious side effects, downgrading essential system components
can even make your whole system unusable. Use with care.
configure-any:
Configure also any unpacked but unconfigured packages on which the current package
depends.
hold:
Allow automatic installs, upgrades or removals of packages even when marked to be on
“hold”. Note: When these actions are requested explicitly, the “hold” package
selection state always gets ignored.
remove-reinstreq:
Remove a package, even if it's broken and marked to require reinstallation. This
may, for example, cause parts of the package to remain on the system, which will
then be forgotten by dpkg.
remove-protected:
Remove, even if the package is considered protected (since dpkg 1.20.1). Protected
packages contain mostly important system boot infrastructure or are used for custom
system-local meta-packages. Removing them might cause the whole system to be unable
to boot or lose required functionality to operate, so use with caution.
remove-essential:
Remove, even if the package is considered essential. Essential packages contain
mostly very basic Unix commands, required for the packaging system, for the
operation of the system in general or during boot (although the latter should be
converted to protected packages instead). Removing them might cause the whole
system to stop working, so use with caution.
depends:
Turn all dependency problems into warnings. This affects the Pre-Depends and
Depends fields.
depends-version:
Don't care about versions when checking dependencies. This affects the Pre-Depends
and Depends fields.
breaks:
Install, even if this would break another package (since dpkg 1.14.6). This affects
the Breaks field.
conflicts:
Install, even if it conflicts with another package. This is dangerous, for it will
usually cause overwriting of some files. This affects the Conflicts field.
confmiss:
Always install the missing conffile without prompting. This is dangerous, since it
means not preserving a change (removing) made to the file.
confnew:
If a conffile has been modified and the version in the package did change, always
install the new version without prompting, unless the --force-confdef is also
specified, in which case the default action is preferred.
confold:
If a conffile has been modified and the version in the package did change, always
keep the old version without prompting, unless the --force-confdef is also
specified, in which case the default action is preferred.
confdef:
If a conffile has been modified and the version in the package did change, always
choose the default action without prompting. If there is no default action it will
stop to ask the user unless --force-confnew or --force-confold is also been given,
in which case it will use that to decide the final action.
confask:
If a conffile has been modified always offer to replace it with the version in the
package, even if the version in the package did not change (since dpkg 1.15.8). If
any of --force-confnew, --force-confold, or --force-confdef is also given, it will
be used to decide the final action.
overwrite:
Overwrite one package's file with another's file.
overwrite-dir:
Overwrite one package's directory with another's file.
overwrite-diverted:
Overwrite a diverted file with an undiverted version.
statoverride-add:
Overwrite an existing stat override when adding it (since dpkg 1.19.5).
statoverride-remove:
Ignore a missing stat override when removing it (since dpkg 1.19.5).
security-mac(*):
Use platform-specific Mandatory Access Controls (MAC) based security when installing
files into the filesystem (since dpkg 1.19.5). On Linux systems the implementation
uses SELinux.
unsafe-io:
Do not perform safe I/O operations when unpacking (since dpkg 1.15.8.6). Currently
this implies not performing file system syncs before file renames, which is known to
cause substantial performance degradation on some file systems, unfortunately the
ones that require the safe I/O on the first place due to their unreliable behaviour
causing zero-length files on abrupt system crashes.
Note: For ext4, the main offender, consider using instead the mount option
nodelalloc, which will fix both the performance degradation and the data safety
issues, the latter by making the file system not produce zero-length files on abrupt
system crashes with any software not doing syncs before atomic renames.
Warning: Using this option might improve performance at the cost of losing data, use
with care.
script-chrootless:
Run maintainer scripts without chroot(2)ing into instdir even if the package does
not support this mode of operation (since dpkg 1.18.5).
Warning: This can destroy your host system, use with extreme care.
architecture:
Process even packages with wrong or no architecture.
bad-version:
Process even packages with wrong versions (since dpkg 1.16.1).
bad-path:
PATH is missing important programs, so problems are likely.
not-root:
Try to (de)install things even when not root.
bad-verify:
Install a package even if it fails authenticity check.
--ignore-depends=package,...
Ignore dependency-checking for specified packages (actually, checking is performed,
but only warnings about conflicts are given, nothing else). This affects the Pre-
Depends, Depends and Breaks fields.
--no-act, --dry-run, --simulate
Do everything which is supposed to be done, but don't write any changes. This is used
to see what would happen with the specified action, without actually modifying
anything.
Be sure to give --no-act before the action-parameter, or you might end up with
undesirable results. (e.g. dpkg --purge foo --no-act will first purge package “foo”
and then try to purge package ”--no-act”, even though you probably expected it to
actually do nothing).
-R, --recursive
Recursively handle all regular files matching pattern *.deb found at specified
directories and all of its subdirectories. This can be used with -i, -A, --install,
--unpack and --record-avail actions.
-G Don't install a package if a newer version of the same package is already installed.
This is an alias of --refuse-downgrade.
--admindir=dir
Set the administrative directory to directory. This directory contains many files
that give information about status of installed or uninstalled packages, etc.
Defaults to «/var/lib/dpkg» if DPKG_ADMINDIR has not been set.
--instdir=dir
Set the installation directory, which refers to the directory where packages are to be
installed. instdir is also the directory passed to chroot(2) before running package's
installation scripts, which means that the scripts see instdir as a root directory.
Defaults to «/».
--root=dir
Set the root directory to directory, which sets the installation directory to «dir»
and the administrative directory to «dir/var/lib/dpkg».
-O, --selected-only
Only process the packages that are selected for installation. The actual marking is
done with dselect or by dpkg, when it handles packages. For example, when a package is
removed, it will be marked selected for deinstallation.
-E, --skip-same-version
Don't install the package if the same version and architecture of the package is
already installed.
Since dpkg 1.21.10, the architecture is also taken into account, which makes it
possible to cross-grade packages or install additional co-installable instances with
the same version, but different architecture.
--pre-invoke=command
--post-invoke=command
Set an invoke hook command to be run via “sh -c” before or after the dpkg run for the
unpack, configure, install, triggers-only, remove, purge, add-architecture and remove-
architecture dpkg actions (since dpkg 1.15.4; add-architecture and remove-architecture
actions since dpkg 1.17.19). This option can be specified multiple times. The order
the options are specified is preserved, with the ones from the configuration files
taking precedence. The environment variable DPKG_HOOK_ACTION is set for the hooks to
the current dpkg action.
Note: Front-ends might call dpkg several times per invocation, which might run the
hooks more times than expected.
--path-exclude=glob-pattern
--path-include=glob-pattern
Set glob-pattern as a path filter, either by excluding or re-including previously
excluded paths matching the specified patterns during install (since dpkg 1.15.8).
Warning: Take into account that depending on the excluded paths you might completely
break your system, use with caution.
The glob patterns use the same wildcards used in the shell, were ‘*’ matches any
sequence of characters, including the empty string and also ‘/’. For example,
«/usr/*/READ*» matches «/usr/share/doc/package/README». As usual, ‘?’ matches any
single character (again, including ‘/’). And ‘[’ starts a character class, which can
contain a list of characters, ranges and complementations. See glob(7) for detailed
information about globbing. Note: The current implementation might re-include more
directories and symlinks than needed, in particular when there is a more specific re-
inclusion, to be on the safe side and avoid possible unpack failures; future work
might fix this.
This can be used to remove all paths except some particular ones; a typical case is:
--path-exclude=/usr/share/doc/*
--path-include=/usr/share/doc/*/copyright
to remove all documentation files except the copyright files.
These two options can be specified multiple times, and interleaved with each other.
Both are processed in the given order, with the last rule that matches a file name
making the decision.
The filters are applied when unpacking the binary packages, and as such only have
knowledge of the type of object currently being filtered (e.g. a normal file or a
directory) and have not visibility of what objects will come next. Because these
filters have side effects (in contrast to find(1) filters), excluding an exact
pathname that happens to be a directory object like /usr/share/doc will not have the
desired result, and only that pathname will be excluded (which could be automatically
reincluded if the code sees the need). Any subsequent files contained within that
directory will fail to unpack.
Hint: make sure the globs are not expanded by your shell.
--verify-format format-name
Sets the output format for the --verify command (since dpkg 1.17.2).
The only currently supported output format is rpm, which consists of a line for every
path that failed any check. These lines have the following format:
missing [c] pathname [(error-message)]
??5?????? [c] pathname
The first 9 characters are used to report the checks result, either a literal missing
when the file is not present or its metadata cannot be fetched, or one of the
following special characters that report the result for each check:
‘?’ Implies the check could not be done (lack of support, file permissions, etc).
‘.’ Implies the check passed.
‘A-Za-z0-9’
Implies a specific check failed. The following positions and alphanumeric
characters are currently supported:
1 ‘?’
These checks are currently not supported, will always be ‘?’.
2 ‘M’
The file mode check failed (since dpkg 1.21.0). Because pathname metadata is
currently not tracked, this check can only be partially emulated via a very
simple heuristic for pathnames that have a known digest, which implies they
should be regular files, where the check will fail if the pathname is not a
regular file on the filesystem. This check will currently never succeed as it
does not have enough information available.
3 ‘5’
The digest check failed, which means the file contents have changed. This is
only an integrity check and should not be considered as any kind of security
verification.
4-9 ‘?’
These checks are currently not supported, will always be ‘?’.
The line is followed by a space and an attribute character. The following attribute
character is supported:
‘c’ The pathname is a conffile.
Finally followed by another space and the pathname.
In case the entry was of the missing type, and the file was not actually present on
the filesystem, then the line is followed by a space and the error message enclosed
within parenthesis.
--status-fd n
Send machine-readable package status and progress information to file descriptor n.
This option can be specified multiple times. The information is generally one record
per line, in one of the following forms:
status: package: status
Package status changed; status is as in the status file.
status: package : error : extended-error-message
An error occurred. Any possible newlines in extended-error-message will be
converted to spaces before output.
status: file : conffile-prompt : 'real-old' 'real-new' useredited distedited
User is being asked a conffile question.
processing: stage: package
Sent just before a processing stage starts. stage is one of upgrade, install (both
sent before unpacking), configure, trigproc, disappear, remove, purge.
--status-logger=command
Send machine-readable package status and progress information to the shell command's
standard input, to be run via “sh -c” (since dpkg 1.16.0). This option can be
specified multiple times. The output format used is the same as in --status-fd.
--log=filename
Log status change updates and actions to filename, instead of the default
/var/log/dpkg.log. If this option is given multiple times, the last filename is used.
Log messages are of the form:
YYYY-MM-DD HH:MM:SS startup type command
For each dpkg invocation where type is archives (with a command of unpack or
install) or packages (with a command of configure, triggers-only, remove or
purge).
YYYY-MM-DD HH:MM:SS status state pkg installed-version
For status change updates.
YYYY-MM-DD HH:MM:SS action pkg installed-version available-version
For actions where action is one of install, upgrade, configure, trigproc,
disappear, remove or purge.
YYYY-MM-DD HH:MM:SS conffile filename decision
For conffile changes where decision is either install or keep.
--robot
Use a machine-readable output format. This provides an interface for programs that
need to parse the output of some of the commands that do not otherwise emit a machine-
readable output format. No localization will be used, and the output will be modified
to make it easier to parse.
The only currently supported command is --version.
--no-pager
Disables the use of any pager when showing information (since dpkg 1.19.2).
--no-debsig
Do not try to verify package signatures.
--no-triggers
Do not run any triggers in this run (since dpkg 1.14.17), but activations will still
be recorded. If used with --configure package or --triggers-only package then the
named package postinst will still be run even if only a triggers run is needed. Use of
this option may leave packages in the improper triggers-awaited and triggers-pending
states. This can be fixed later by running: dpkg --configure --pending.
--triggers
Cancels a previous --no-triggers (since dpkg 1.14.17).
EXIT STATUS
0 The requested action was successfully performed. Or a check or assertion command
returned true.
1 A check or assertion command returned false.
2 Fatal or unrecoverable error due to invalid command-line usage, or interactions with
the system, such as accesses to the database, memory allocations, etc.
ENVIRONMENT
External environment
PATH
This variable is expected to be defined in the environment and point to the system
paths where several required programs are to be found. If it's not set or the programs
are not found, dpkg will abort.
HOME
If set, dpkg will use it as the directory from which to read the user specific
configuration file.
TMPDIR
If set, dpkg will use it as the directory in which to create temporary files and
directories.
SHELL
The program dpkg will execute when starting a new interactive shell, or when spawning
a command via a shell.
PAGER
DPKG_PAGER
The program dpkg will execute when running a pager, which will be executed with
«$SHELL -c», for example when displaying the conffile differences. If SHELL is not
set, «sh» will be used instead. The DPKG_PAGER overrides the PAGER environment
variable (since dpkg 1.19.2).
DPKG_COLORS
Sets the color mode (since dpkg 1.18.5). The currently accepted values are: auto
(default), always and never.
DPKG_DEBUG
Sets the debug mask (since dpkg 1.21.10) from an octal value. The currently accepted
flags are described in the --debug option.
DPKG_FORCE
Sets the force flags (since dpkg 1.19.5). When this variable is present, no built-in
force defaults will be applied. If the variable is present but empty, all force flags
will be disabled.
DPKG_ADMINDIR
If set and the --admindir or --root options have not been specified, it will be used
as the dpkg administrative directory (since dpkg 1.20.0).
DPKG_FRONTEND_LOCKED
Set by a package manager frontend to notify dpkg that it should not acquire the
frontend lock (since dpkg 1.19.1).
Internal environment
LESS
Defined by dpkg to “-FRSXMQ”, if not already set, when spawning a pager (since dpkg
1.19.2). To change the default behavior, this variable can be preset to some other
value including an empty string, or the PAGER or DPKG_PAGER variables can be set to
disable specific options with «-+», for example DPKG_PAGER="less -+F".
DPKG_ROOT
Defined by dpkg on the maintainer script environment to indicate which installation to
act on (since dpkg 1.18.5). The value is intended to be prepended to any path
maintainer scripts operate on. During normal operation, this variable is empty. When
installing packages into a different instdir, dpkg normally invokes maintainer scripts
using chroot(2) and leaves this variable empty, but if --force-script-chrootless is
specified then the chroot(2) call is skipped and instdir is non-empty.
DPKG_ADMINDIR
Defined by dpkg on the maintainer script environment to indicate the dpkg
administrative directory to use (since dpkg 1.16.0). This variable is always set to
the current --admindir value.
DPKG_FORCE
Defined by dpkg on the subprocesses environment to all the currently enabled force
option names separated by commas (since dpkg 1.19.5).
DPKG_SHELL_REASON
Defined by dpkg on the shell spawned on the conffile prompt to examine the situation
(since dpkg 1.15.6). Current valid value: conffile-prompt.
DPKG_CONFFILE_OLD
Defined by dpkg on the shell spawned on the conffile prompt to examine the situation
(since dpkg 1.15.6). Contains the path to the old conffile.
DPKG_CONFFILE_NEW
Defined by dpkg on the shell spawned on the conffile prompt to examine the situation
(since dpkg 1.15.6). Contains the path to the new conffile.
DPKG_HOOK_ACTION
Defined by dpkg on the shell spawned when executing a hook action (since dpkg 1.15.4).
Contains the current dpkg action.
DPKG_RUNNING_VERSION
Defined by dpkg on the maintainer script environment to the version of the currently
running dpkg instance (since dpkg 1.14.17).
DPKG_MAINTSCRIPT_PACKAGE
Defined by dpkg on the maintainer script environment to the (non-arch-qualified)
package name being handled (since dpkg 1.14.17).
DPKG_MAINTSCRIPT_PACKAGE_REFCOUNT
Defined by dpkg on the maintainer script environment to the package reference count,
i.e. the number of package instances with a state greater than not-installed (since
dpkg 1.17.2).
DPKG_MAINTSCRIPT_ARCH
Defined by dpkg on the maintainer script environment to the architecture the package
got built for (since dpkg 1.15.4).
DPKG_MAINTSCRIPT_NAME
Defined by dpkg on the maintainer script environment to the name of the script
running, one of preinst, postinst, prerm or postrm (since dpkg 1.15.7).
DPKG_MAINTSCRIPT_DEBUG
Defined by dpkg on the maintainer script environment to a value (‘0’ or ‘1’) noting
whether debugging has been requested (with the --debug option) for the maintainer
scripts (since dpkg 1.18.4).
FILES
/etc/dpkg/dpkg.cfg.d/[0-9a-zA-Z_-]*
Configuration fragment files (since dpkg 1.15.4).
/etc/dpkg/dpkg.cfg
Configuration file with default options.
/var/log/dpkg.log
Default log file (see /etc/dpkg/dpkg.cfg and option --log).
The other files listed below are in their default directories, see option --admindir to
see how to change locations of these files.
/var/lib/dpkg/available
List of available packages.
/var/lib/dpkg/status
Statuses of available packages. This file contains information about whether a package
is marked for removing or not, whether it is installed or not, etc. See section
INFORMATION ABOUT PACKAGES for more info.
The status file is backed up daily in /var/backups. It can be useful if it's lost or
corrupted due to filesystems troubles.
The format and contents of a binary package are described in deb(5).
SECURITY
Any operation that needs write access to the database or the filesystem is considered a
privileged operation that might allow root escalation. These operations must never be
delegated to an untrusted user or be done on untrusted packages, as that might allow root
access to the system.
Some operations (such as package verification) might need root privileges to be able to
access files on the filesystem that would otherwise be inaccessible due to restricted
permissions, but should otherwise work normally and produce appropriate messages in those
cases.
Query operations should never require root, and delegating their execution to unprivileged
users via some gain-root command can have security implications (such as privilege
escalation), for example when a pager is automatically invoked by the tool.
See also the SECURITY section of the dpkg-deb(1) and dpkg-split(1) manual pages.
BUGS
--no-act usually gives less information than might be helpful.
EXAMPLES
To list installed packages related to the editor vi(1) (note that dpkg-query does not load
the available file anymore by default, and the dpkg-query --load-avail option should be
used instead for that):
dpkg -l '*vi*'
To see the entries in /var/lib/dpkg/available of two packages:
dpkg --print-avail elvis vim | less
To search the listing of packages yourself:
less /var/lib/dpkg/available
To remove an installed elvis package:
dpkg -r elvis
To install a package, you first need to find it in an archive or CDROM. The available file
shows that the vim package is in section editors:
cd /media/cdrom/pool/main/v/vim
dpkg -i vim_4.5-3.deb
To make a local copy of the package selection states:
dpkg --get-selections >myselections
You might transfer this file to another computer, and after having updated the available
file there with your package manager frontend of choice (see
<https://wiki.debian.org/Teams/Dpkg/FAQ#set-selections> for more details), for example:
apt-cache dumpavail | dpkg --merge-avail
or with dpkg 1.17.6 and earlier:
avail=$(mktemp)
apt-cache dumpavail >"$avail"
dpkg --merge-avail "$avail"
rm "$avail"
you can install it with:
dpkg --clear-selections
dpkg --set-selections <myselections
Note that this will not actually install or remove anything, but just set the selection
state on the requested packages. You will need some other application to actually download
and install the requested packages. For example, run apt-get dselect-upgrade.
Ordinarily, you will find that dselect(1) provides a more convenient way to modify the
package selection states.
ADDITIONAL FUNCTIONALITY
Additional functionality can be gained by installing any of the following packages: apt,
aptitude and debsums.
SEE ALSO
aptitude(8), apt(8), dselect(1), dpkg-deb(1), dpkg-query(1), deb(5), deb-control(5),
dpkg.cfg(5), and dpkg-reconfigure(8).
AUTHORS
See /usr/share/doc/dpkg/THANKS for the list of people who have contributed to dpkg.