Provided by: efax_0.9a-21_amd64 
NAME
efix - convert between fax, text, bit-map and gray-scale formats
SYNOPSIS
efix [ options ] file...
OPTIONS
Where options are:
-i f the input image is in format f. Default is to automatically determine the input
type from its contents.
fax fax ("Group3") 1-D coded image
text text. Line feeds separate lines, form feeds cause page breaks and tabs are
expanded assuming tabs every 8 columns.
pbm raw PBM (portable bit map)
tiffg3
TIFF format with Group 3 (fax) compression.
tiffraw
TIFF format with no compression.
-o f write the output in format f. Default is tiffg3.
fax fax ("Group3") 1-D coded image
pbm raw PBM
pgm raw PGM (Portable Gray Map). Gray-scale values are produced by summing pixels in
4x4 pixel blocks. The output file is 1/4 of the size given by -p. The resulting
image has 17 discrete values between 0 and 255.
pcl HP-PCL (e.g. HP LaserJet).
ps encapsulated Postscript (e.g. Apple Laserwriter). The file is compressed using
differential coding vertically and run-length coding horizontally. There is no
provision for positioning the image within the page and so the image will appear
at the lower left corner of the page when printed.
tiffg3
TIFF format with Group 3 (fax) compression.
tiffraw
TIFF format with no compression.
-n pat use the printf(3) pattern path to generate the output file name. Up to three %d
escapes will be replaced by the page number starting with 1 (e.g. -n order.%03d
will create file names order.001, order.002, etc.)
-v lvl print messages of type in string lvl. Each lower-case letter in lvl enables one
type of message:
e - errors
w - warnings
i - information messages
a - program arguments
f - file format details
The default is "ewi".
-f fnt use font file fnt for text. The font file for an WxH font should be a bit map of
an image of H rows and 256*W columns. Each successive WxH cell contains the bit
map for characters with codes from 0 to 255. The default is to use a built-in
8x16 font.
-s XxY scale the input by a factor of X horizontally and Y vertically. Scaling does not
change the size of the output (use -p). If Y is not specified it is assumed to
be the same as X. Any floating point value may be used for X and Y. The default
is 1,1.
-d R,D displace the output right by R and down by D (opposite if negative). See below
for units. Default is 0,0.
-p WxH truncate or pad the output to generate an image of width W and height H. This
does not scale the input. See below for units. The default is the size of the
input image if it can be determined or A4 (215x297mm) if it can't.
-r XxY assume an output device resolution of X by Y dots per inch. If Y is not
specified it is assumed to be the same as X. The default is the input resolution
if it can be determined or the fax resolution of 204.1x195.6 dpi if it can't.
-R XxY assume an input device resolution of X by Y dots per inch. If Y is not specified
it is assumed to be the same as X. The default is the input resolution if it can
be determined or the fax resolution of 204.1x195.6 dpi if it can't.
-l n place n lines per page during text input. Default is 66.
-O f overlay (logical OR) the image from file f into the output. Use "-" for standard
input (-O-). Default is no overlay file.
-M ignore all other options and copy the standard input to the standard output while
applying base64 (MIME) encoding as specified by RFC 1521.
FILES
If no -n options are given, output is written to the standard output.
UNITS
The units of the W, H, R, and D values above are in inches by default. Any floating point
value may be used. Units of inches, centimetres, millimetres or points (72 per inch) can
be used instead by appending one of the strings `in', `cm', `mm', or `pt' to the argument
(e.g. -d2,4cm).
CUT AND PASTE
The -d and -p options allow efix to cut out images from received faxes for use in other
faxes or documents. The -d option specifies the top left portion of the desired image and
the -p option gives the size of the cut image. For example, the command
efix -d-5,-8 -p2,1 sample.001 >sig.001
would cut out part of the input with its top left corner 5 inches from the left edge and 8
inches from top of the input image. The output image would be 2 inches wide and 1 inch
high.
The -O option allows efix to superimpose two or more images. The overlay image must be in
fax format and cannot be scaled, truncated or shifted. However, multiple efix commands may
be used to transform images before combining them. For example, the commands
efix -d4,8 signature >sig.fax
efix -O sig.fax letterhead >letterhead.fax
efix -O letterhead.fax letter.002 >letter.002.new
will shift the image in the file signature down 8 inches and right 4 inches and combine
(overlay) it with the images in the files letterhead and letter.002.
REFERENCES
Gunter Born, "The File Formats Handbook", International Thompson Computer Press, 1995.
COPYRIGHT
efix is copyright 1994 -- 1999 by Ed Casas. It may be used, copied and modified under the
terms of the GNU Public License.
DISCLAIMER
Although efix has been tested it may have errors that will prevent it from working
correctly on your system. Some of these errors may cause serious problems including loss
of data.
SEE ALSO
efax(1), ghostscript(1), pbm(5), pgm(5).
BUGS
Only reads two types of TIFF compression formats.
Does not write multi-page TIFF files (a feature).