NAME

       git-cherry-pick - Apply the changes introduced by some existing commits

SYNOPSIS

       git cherry-pick [--edit] [-n] [-m <parent-number>] [-s] [-x] [--ff]
                         [-S[<keyid>]] <commit>...
       git cherry-pick (--continue | --skip | --abort | --quit)

DESCRIPTION

       Given one or more existing commits, apply the change each one introduces, recording a new
       commit for each. This requires your working tree to be clean (no modifications from the
       HEAD commit).

       When it is not obvious how to apply a change, the following happens:

        1. The current branch and HEAD pointer stay at the last commit successfully made.

        2. The CHERRY_PICK_HEAD ref is set to point at the commit that introduced the change that
           is difficult to apply.

        3. Paths in which the change applied cleanly are updated both in the index file and in
           your working tree.

        4. For conflicting paths, the index file records up to three versions, as described in
           the "TRUE MERGE" section of git-merge(1). The working tree files will include a
           description of the conflict bracketed by the usual conflict markers <<<<<<< and
           >>>>>>>.

        5. No other modifications are made.

       See git-merge(1) for some hints on resolving such conflicts.

OPTIONS

       <commit>...
           Commits to cherry-pick. For a more complete list of ways to spell commits, see
           gitrevisions(7). Sets of commits can be passed but no traversal is done by default, as
           if the --no-walk option was specified, see git-rev-list(1). Note that specifying a
           range will feed all <commit>... arguments to a single revision walk (see a later
           example that uses maint master..next).

       -e, --edit
           With this option, git cherry-pick will let you edit the commit message prior to
           committing.

       --cleanup=<mode>
           This option determines how the commit message will be cleaned up before being passed
           on to the commit machinery. See git-commit(1) for more details. In particular, if the
           <mode> is given a value of scissors, scissors will be appended to MERGE_MSG before
           being passed on in the case of a conflict.

       -x
           When recording the commit, append a line that says "(cherry picked from commit ...)"
           to the original commit message in order to indicate which commit this change was
           cherry-picked from. This is done only for cherry picks without conflicts. Do not use
           this option if you are cherry-picking from your private branch because the information
           is useless to the recipient. If on the other hand you are cherry-picking between two
           publicly visible branches (e.g. backporting a fix to a maintenance branch for an older
           release from a development branch), adding this information can be useful.

       -r
           It used to be that the command defaulted to do -x described above, and -r was to
           disable it. Now the default is not to do -x so this option is a no-op.

       -m <parent-number>, --mainline <parent-number>
           Usually you cannot cherry-pick a merge because you do not know which side of the merge
           should be considered the mainline. This option specifies the parent number (starting
           from 1) of the mainline and allows cherry-pick to replay the change relative to the
           specified parent.

       -n, --no-commit
           Usually the command automatically creates a sequence of commits. This flag applies the
           changes necessary to cherry-pick each named commit to your working tree and the index,
           without making any commit. In addition, when this option is used, your index does not
           have to match the HEAD commit. The cherry-pick is done against the beginning state of
           your index.

           This is useful when cherry-picking more than one commits' effect to your index in a
           row.

       -s, --signoff
           Add a Signed-off-by trailer at the end of the commit message. See the signoff option
           in git-commit(1) for more information.

       -S[<keyid>], --gpg-sign[=<keyid>], --no-gpg-sign
           GPG-sign commits. The keyid argument is optional and defaults to the committer
           identity; if specified, it must be stuck to the option without a space.  --no-gpg-sign
           is useful to countermand both commit.gpgSign configuration variable, and earlier
           --gpg-sign.

       --ff
           If the current HEAD is the same as the parent of the cherry-pick’ed commit, then a
           fast forward to this commit will be performed.

       --allow-empty
           By default, cherry-picking an empty commit will fail, indicating that an explicit
           invocation of git commit --allow-empty is required. This option overrides that
           behavior, allowing empty commits to be preserved automatically in a cherry-pick. Note
           that when "--ff" is in effect, empty commits that meet the "fast-forward" requirement
           will be kept even without this option. Note also, that use of this option only keeps
           commits that were initially empty (i.e. the commit recorded the same tree as its
           parent). Commits which are made empty due to a previous commit are dropped. To force
           the inclusion of those commits use --keep-redundant-commits.

       --allow-empty-message
           By default, cherry-picking a commit with an empty message will fail. This option
           overrides that behavior, allowing commits with empty messages to be cherry picked.

       --keep-redundant-commits
           If a commit being cherry picked duplicates a commit already in the current history, it
           will become empty. By default these redundant commits cause cherry-pick to stop so the
           user can examine the commit. This option overrides that behavior and creates an empty
           commit object. Implies --allow-empty.

       --strategy=<strategy>
           Use the given merge strategy. Should only be used once. See the MERGE STRATEGIES
           section in git-merge(1) for details.

       -X<option>, --strategy-option=<option>
           Pass the merge strategy-specific option through to the merge strategy. See git-
           merge(1) for details.

       --rerere-autoupdate, --no-rerere-autoupdate
           After the rerere mechanism reuses a recorded resolution on the current conflict to
           update the files in the working tree, allow it to also update the index with the
           result of resolution.  --no-rerere-autoupdate is a good way to double-check what
           rerere did and catch potential mismerges, before committing the result to the index
           with a separate git add.

SEQUENCER SUBCOMMANDS

       --continue
           Continue the operation in progress using the information in .git/sequencer. Can be
           used to continue after resolving conflicts in a failed cherry-pick or revert.

       --skip
           Skip the current commit and continue with the rest of the sequence.

       --quit
           Forget about the current operation in progress. Can be used to clear the sequencer
           state after a failed cherry-pick or revert.

       --abort
           Cancel the operation and return to the pre-sequence state.

EXAMPLES

       git cherry-pick master
           Apply the change introduced by the commit at the tip of the master branch and create a
           new commit with this change.

       git cherry-pick ..master, git cherry-pick ^HEAD master
           Apply the changes introduced by all commits that are ancestors of master but not of
           HEAD to produce new commits.

       git cherry-pick maint next ^master, git cherry-pick maint master..next
           Apply the changes introduced by all commits that are ancestors of maint or next, but
           not master or any of its ancestors. Note that the latter does not mean maint and
           everything between master and next; specifically, maint will not be used if it is
           included in master.

       git cherry-pick master~4 master~2
           Apply the changes introduced by the fifth and third last commits pointed to by master
           and create 2 new commits with these changes.

       git cherry-pick -n master~1 next
           Apply to the working tree and the index the changes introduced by the second last
           commit pointed to by master and by the last commit pointed to by next, but do not
           create any commit with these changes.

       git cherry-pick --ff ..next
           If history is linear and HEAD is an ancestor of next, update the working tree and
           advance the HEAD pointer to match next. Otherwise, apply the changes introduced by
           those commits that are in next but not HEAD to the current branch, creating a new
           commit for each new change.

       git rev-list --reverse master -- README | git cherry-pick -n --stdin
           Apply the changes introduced by all commits on the master branch that touched README
           to the working tree and index, so the result can be inspected and made into a single
           new commit if suitable.

       The following sequence attempts to backport a patch, bails out because the code the patch
       applies to has changed too much, and then tries again, this time exercising more care
       about matching up context lines.

           $ git cherry-pick topic^             (1)
           $ git diff                           (2)
           $ git cherry-pick --abort            (3)
           $ git cherry-pick -Xpatience topic^  (4)

       1. apply the change that would be shown by git show topic^. In this example, the patch
       does not apply cleanly, so information about the conflict is written to the index and
       working tree and no new commit results.
       2. summarize changes to be reconciled
       3. cancel the cherry-pick. In other words, return to the pre-cherry-pick state, preserving
       any local modifications you had in the working tree.
       4. try to apply the change introduced by topic^ again, spending extra time to avoid
       mistakes based on incorrectly matching context lines.

SEE ALSO

       git-revert(1)

GIT

       Part of the git(1) suite