Provided by: hisat2_2.2.1-4_amd64 
NAME
hisat2-align-s - HISAT2 graph-based alignment of short nucleotide reads to many genomes,
small index binary
DESCRIPTION
HISAT2 version 2.2.1 by Daehwan Kim (infphilo@gmail.com, www.ccb.jhu.edu/people/infphilo)
Usage:
hisat2-align [options]* -x <ht2-idx> {-1 <m1> -2 <m2> | -U <r>} [-S <sam>]
<ht2-idx>
Index filename prefix (minus trailing .X.ht2).
<m1> Files with #1 mates, paired with files in <m2>.
<m2> Files with #2 mates, paired with files in <m1>.
<r> Files with unpaired reads.
<sam> File for SAM output (default: stdout)
<m1>, <m2>, <r> can be comma-separated lists (no whitespace) and can be specified
many times. E.g. '-U file1.fq,file2.fq -U file3.fq'.
Options (defaults in parentheses):
Input:
-q query input files are FASTQ .fq/.fastq (default)
--qseq query input files are in Illumina's qseq format
-f query input files are (multi-)FASTA .fa/.mfa
-r query input files are raw one-sequence-per-line
-c <m1>, <m2>, <r> are sequences themselves, not files
-s/--skip <int>
skip the first <int> reads/pairs in the input (none)
-u/--upto <int>
stop after first <int> reads/pairs (no limit)
-5/--trim5 <int>
trim <int> bases from 5'/left end of reads (0)
-3/--trim3 <int>
trim <int> bases from 3'/right end of reads (0)
--phred33
qualities are Phred+33 (default)
--phred64
qualities are Phred+64
--int-quals
qualities encoded as space-delimited integers
Presets:
Same as:
--fast --no-repeat-index
--sensitive --bowtie2-dp 1 -k 30 --score-min L,0,-0.5
--very-sensitive --bowtie2-dp 2 -k 50 --score-min L,0,-1
Alignment:
--bowtie2-dp <int> use Bowtie2's dynamic programming alignment algorithm (0) - 0: no
dynamic programming, 1: conditional dynamic programming, and 2: unconditional
dynamic programming (slowest)
--n-ceil <func>
func for max # non-A/C/G/Ts permitted in aln (L,0,0.15)
--ignore-quals
treat all quality values as 30 on Phred scale (off)
--nofw do not align forward (original) version of read (off)
--norc do not align reverse-complement version of read (off)
--no-repeat-index
do not use repeat index
Spliced Alignment:
--pen-cansplice <int>
penalty for a canonical splice site (0)
--pen-noncansplice <int>
penalty for a non-canonical splice site (12)
--pen-canintronlen <func>
penalty for long introns (G,-8,1) with canonical splice sites
--pen-noncanintronlen <func>
penalty for long introns (G,-8,1) with noncanonical splice sites
--min-intronlen <int>
minimum intron length (20)
--max-intronlen <int>
maximum intron length (500000)
--known-splicesite-infile <path>
provide a list of known splice sites
--novel-splicesite-outfile <path>
report a list of splice sites
--novel-splicesite-infile <path>
provide a list of novel splice sites
--no-temp-splicesite
disable the use of splice sites found
--no-spliced-alignment
disable spliced alignment
--rna-strandness <string>
specify strand-specific information (unstranded)
--tmo reports only those alignments within known transcriptome
--dta reports alignments tailored for transcript assemblers
--dta-cufflinks
reports alignments tailored specifically for cufflinks
--avoid-pseudogene
tries to avoid aligning reads to pseudogenes (experimental option)
--no-templatelen-adjustment
disables template length adjustment for RNA-seq reads
Scoring:
--mp <int>,<int>
max and min penalties for mismatch; lower qual = lower penalty <6,2>
--sp <int>,<int>
max and min penalties for soft-clipping; lower qual = lower penalty <2,1>
--no-softclip
no soft-clipping
--np <int>
penalty for non-A/C/G/Ts in read/ref (1)
--rdg <int>,<int>
read gap open, extend penalties (5,3)
--rfg <int>,<int>
reference gap open, extend penalties (5,3)
--score-min <func> min acceptable alignment score w/r/t read length
(L,0.0,-0.2)
Reporting:
-k <int>
It searches for at most <int> distinct, primary alignments for each read. Primary
alignments mean alignments whose alignment score is equal to or higher than any
other alignments. The search terminates when it cannot find more distinct valid
alignments, or when it finds <int>, whichever happens first. The alignment score
for a paired-end alignment equals the sum of the alignment scores of the individual
mates. Each reported read or pair alignment beyond the first has the SAM
???secondary??? bit (which equals 256) set in its FLAGS field. For reads that have
more than <int> distinct, valid alignments, hisat2 does not guarantee that the
<int> alignments reported are the best possible in terms of alignment score.
Default: 5 (linear index) or 10 (graph index). Note: HISAT2 is not designed with
large values for -k in mind, and when aligning reads to long, repetitive genomes,
large -k could make alignment much slower.
--max-seeds <int>
HISAT2, like other aligners, uses seed-and-extend approaches. HISAT2 tries to
extend seeds to full-length alignments. In HISAT2, --max-seeds is used to control
the maximum number of seeds that will be extended. For DNA-read alignment
(--no-spliced-alignment), HISAT2 extends up to these many seeds and skips the rest
of the seeds. For RNA-read alignment, HISAT2 skips extending seeds and reports no
alignments if the number of seeds is larger than the number specified with the
option, to be compatible with previous versions of HISAT2. Large values for
--max-seeds may improve alignment sensitivity, but HISAT2 is not designed with
large values for --max-seeds in mind, and when aligning reads to long, repetitive
genomes, large --max-seeds could make alignment much slower. The default value is
the maximum of 5 and the value that comes with -k times 2.
-a/--all
HISAT2 reports all alignments it can find. Using the option is equivalent to using
both --max-seeds and -k with the maximum value that a 64-bit signed integer can
represent (9,223,372,036,854,775,807).
--repeat
report alignments to repeat sequences directly
Paired-end:
-I/--minins <int>
minimum fragment length (0), only valid with --no-spliced-alignment
-X/--maxins <int>
maximum fragment length (500), only valid with --no-spliced-alignment
--fr/--rf/--ff -1, -2 mates align fw/rev, rev/fw, fw/fw (--fr)
--no-mixed
suppress unpaired alignments for paired reads
--no-discordant
suppress discordant alignments for paired reads
Output:
-t/--time
print wall-clock time taken by search phases
--summary-file <path> print alignment summary to this file.
--new-summary
print alignment summary in a new style, which is more machine-friendly.
--quiet
print nothing to stderr except serious errors
--met-file <path>
send metrics to file at <path> (off)
--met-stderr
send metrics to stderr (off)
--met <int>
report internal counters & metrics every <int> secs (1)
--no-head
suppress header lines, i.e. lines starting with @
--no-sq
suppress @SQ header lines
--rg-id <text>
set read group id, reflected in @RG line and RG:Z: opt field
--rg <text>
add <text> ("lab:value") to @RG line of SAM header. Note: @RG line only printed
when --rg-id is set.
--omit-sec-seq
put '*' in SEQ and QUAL fields for secondary alignments.
Performance:
-o/--offrate <int> override offrate of index; must be >= index's offrate
-p/--threads <int> number of alignment threads to launch (1)
--reorder
force SAM output order to match order of input reads
--mm use memory-mapped I/O for index; many 'hisat2's can share
Other:
--qc-filter
filter out reads that are bad according to QSEQ filter
--seed <int>
seed for random number generator (0)
--non-deterministic seed rand. gen. arbitrarily instead of using read attributes
--remove-chrname
remove 'chr' from reference names in alignment
--add-chrname
add 'chr' to reference names in alignment
--version
print version information and quit
-h/--help
print this usage message
64-bit Built on Debian 14 October 2022 Compiler: gcc version 12.2.0 (Ubuntu
12.2.0-9ubuntu1) Options: -O3 -funroll-loops -g3 -Wdate-time -D_FORTIFY_SOURCE=2
-std=c++11 Sizeof {int, long, long long, void*, size_t, off_t}: {4, 8, 8, 8, 8, 8}