Provided by: can-utils_2023.03-1_amd64
NAME
isotpserver - manual page for isotpserver 2023.03-1
SYNOPSIS
isotpserver -l <port> -s <can_id> -d <can_id> [options] <CAN interface>
OPTIONS
ip addressing: -l <port> * (local port for the server) isotp addressing: -s <can_id> * (source can_id. Use 8 digits for extended IDs) -d <can_id> * (destination can_id. Use 8 digits for extended IDs) -x <addr>[:<rxaddr>] (extended addressing / opt. separate rxaddr) -L <mtu>:<tx_dl>:<tx_flags> (link layer options for CAN FD) padding: -p [tx]:[rx] (set and enable tx/rx padding bytes) -P <mode> (check rx padding for (l)ength (c)ontent (a)ll) rx path: (config, which is sent to the sender / data source) -b <bs> (blocksize. 0 = off) -m <val> (STmin in ms/ns. See spec.) -w <num> (max. wait frame transmissions) tx path: (config, which changes local tx settings) -t <time ns> (transmit time in nanosecs) (* = mandatory option) All values except for '-l' and '-t' are expected in hexadecimal values.