NAME

       jt65code, jt9code, jt4code - Weak signal communications encoding support utility.

SYNOPSIS

       jt65code "MESSAGE"

       jt65code [OPTIONS]

       jt9code "MESSAGE"

       jt9code [OPTIONS]

       jt4code "MESSAGE"

       jt4code [OPTIONS]

OPTIONS

       -t
           Prints a selection of messages alongside their corresponding decoded form and types.

DESCRIPTION

       jt65code, jt9code and jt4code are utility programs that let you explore the conversion of
       user-level messages into channel symbols or “tone numbers.” These programs can be useful
       to someone designing a beacon generator for JT9 or JT65, or for studying behavior of the
       error-control codes for each of the protocols.

       Channel-symbol values for JT9 run from 0 to 8, with 0 representing the sync tone. The
       total number of symbols in a transmitted message is 85. To run jt9code, enter the program
       name followed by a JT9 message enclosed in quotes. In Windows the command and program
       output might look like this:

           $ jt9code "G0XYZ K1ABC FN42"
           Message:   G0XYZ K1ABC FN42
           Channel symbols:
            0 0 7 3 0 3 2 5 4 0 1 7 7 7 8 0 4 8 8 2 2 1 0 1 1 3 5 4 5 6
            8 7 0 6 0 1 8 3 3 7 8 1 1 2 4 5 8 1 5 2 0 0 8 6 0 5 8 5 1 0
            5 8 7 7 2 0 4 6 6 6 7 6 0 1 8 8 5 7 2 5 1 5 0 4 0
           Decoded message: G0XYZ K1ABC FN42

       For the corresponding program jt65code only the information-carrying channel symbols are
       shown, and the symbol values range from 0 to 63. Sync synbols lie two tone intervals below
       data tone 0, and the sequential locations of sync symbols are described in the JT65
       Protocol section of this Guide.

       A typical execution of jt65code is shown below. The program displays the packed message of
       72 bits, shown here as 12 six-bit symbol values, followed by the channel symbols:

           $ jt65code "G0XYZ K1ABC FN42"
           Message:   G0XYZ K1ABC FN42
           Packed message, 6-bit symbols:  61 36 45 30  3 55  3  2 14  5 33 40
           Information-carrying channel symbols:
              56 40  8 40 51 47 50 34 44 53 22 53 28 31 13 60 46  2 14 58 43
              41 58 35  8 35  3 24  1 21 41 43  0 25 54  9 41 54  7 25 21  9
              62 59  7 43 31 21 57 13 59 41 17 49 19 54 21 39 33 42 18  2 60
           Decoded message: G0XYZ K1ABC FN42

       For an illustration of the power of the strong error-control coding in JT9, JT65 and JT4,
       try looking at the channel symbols after changing a single character in the message. For
       example, change the grid locater from FN42 to FN43 in the JT65 message:

           $ jt65code "G0XYZ K1ABC FN43"
           Message:   G0XYZ K1ABC FN43
           Packed message, 6-bit symbols:  61 36 45 30  3 55  3  2 14  5 33 41
           Information-carrying channel symbols:
              25 35 47  8 13  9 61 40 44  9 51  6  8 40 38 34  8  2 21 23 30
              51 32 56 39 35  3 50 48 30  8  5 40 18 54  9 24 30 26 61 23 11
               3 59  7  7 39  1 25 24  4 50 17 49 52 19 34  7  4 34 61  2 61
           Decoded message: G0XYZ K1ABC FN43

       You will discover that every possible JT65 message differs from every other possible JT65
       message in at least 52 of the 63 information-carrying channel symbols.

       WSJT-X home page
           http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html

       WSJT-X User’s Guide

AUTHOR

       Joe Taylor, K1JT.

COPYING

       jt65code, jt9code and jt4code are Copyright © 2001 - 2015 by Joseph H. Taylor, Jr., K1JT,
       with contributions from additional authors. WSJT-X is Open Source software, licensed under
       the GNU General Public License (GPLv3).

       These programs are distributed in the hope that they will be useful, but WITHOUT ANY
       WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
       PURPOSE. See the GNU General Public License for more details.