Provided by: sumo_1.18.0+dfsg-3build1_amd64 
NAME
Eclipse - Router for the microscopic traffic simulation SUMO based on junction turning
ratios
SYNOPSIS
jtrrouter [OPTION]*
DESCRIPTION
Eclipse SUMO jtrrouter Version 1.18.0
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Router for the microscopic, multi-modal traffic simulation SUMO based on
junction turning ratios.
Configuration Options:
-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-configuration.relative
Enforce relative paths when saving the configuration
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
Input Options:
-n, --net-file FILE
Use FILE as SUMO-network to route on
-a, --additional-files FILE
Read additional network data (districts, bus stops) from FILE(s)
-r, --route-files FILE
Read sumo routes, alternatives, flows, and trips from FILE(s)
--phemlight-path FILE
Determines where to load PHEMlight definitions from
--phemlight-year INT
Enable fleet age modelling with the given reference year in PHEMlight5
--phemlight-temperature FLOAT
Set ambient temperature to correct NOx emissions in PHEMlight5
--junction-taz
Initialize a TAZ for every junction to use attributes toJunction and fromJunction
-t, --turn-ratio-files FILE
Read turning ratios from FILE(s)
Output Options:
-o, --output-file FILE
Write generated routes to FILE
--vtype-output FILE
Write used vehicle types into separate FILE
--keep-vtype-distributions
Keep vTypeDistribution ids when writing vehicles and their types
--emissions.volumetric-fuel
Return fuel consumption values in (legacy) unit l instead of mg
--named-routes
Write vehicles that reference routes by their id
--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced
by the current time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rather than
seconds
--exit-times
Write exit times (weights) for each edge
Processing Options:
--max-alternatives INT
Prune the number of alternatives to INT
--with-taz
Use origin and destination zones (districts) for in- and output
--unsorted-input
Assume input is unsorted
-s, --route-steps TIME
Load routes for the next number of seconds ahead
--no-internal-links
Disable (junction) internal links
--randomize-flows
generate random departure times for flow input
--remove-loops
Remove loops within the route; Remove turnarounds at start and end of the route
--repair
Tries to correct a false route
--repair.from
Tries to correct an invalid starting edge by using the first usable edge instead
--repair.to
Tries to correct an invalid destination edge by using the last usable edge instead
--mapmatch.distance FLOAT
Maximum distance when mapping input coordinates (fromXY etc.) to the road network
--mapmatch.junctions
Match positions to junctions instead of edges
--bulk-routing
Aggregate routing queries with the same origin
--routing-threads INT
The number of parallel execution threads used for routing
--restriction-params STR[]
Comma separated list of param keys to compare for additional restrictions
--weights.minor-penalty FLOAT
Apply the given time penalty when computing routing costs for minor-link internal
lanes
--max-edges-factor FLOAT
Routes are cut off when the route edges to net edges ratio is larger than FLOAT
-T, --turn-defaults STR[]
Use STR[] as default turn definition
--sink-edges STR[]
Use STR[] as list of sink edges
-A, --accept-all-destinations
Whether all edges are allowed as sink edges
-i, --ignore-vclasses
Ignore road restrictions based on vehicle class
--allow-loops
Allow to re-use a road
-S, --sources-are-sinks
Use all source edges as sink edges.
-D, --discount-sources
Subtract upstream flow when inserting a new flow. When option --sources-are-sinks
is set, the upstream flow is limited to the value of the source flow and the
remaining part terminates.
Defaults Options:
--departlane STR
Assigns a default depart lane
--departpos STR
Assigns a default depart position
--departspeed STR
Assigns a default depart speed
--arrivallane STR
Assigns a default arrival lane
--arrivalpos STR
Assigns a default arrival position
--arrivalspeed STR
Assigns a default arrival speed
--defaults-override
Defaults will override given values
Time Options:
-b, --begin TIME
Defines the begin time; Previous trips will be discarded
-e, --end TIME
Defines the end time; Later trips will be discarded; Defaults to the maximum time
that SUMO can represent
Report Options:
-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or
"always")
--xml-validation.routes STR
Set schema validation scheme of SUMO route inputs ("never", "local", "auto" or
"always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--language STR
Language to use in messages
--ignore-errors
Continue if a route could not be build
--stats-period INT
Defines how often statistics shall be printed
--no-step-log
Disable console output of route parsing step
Random Number Options:
--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
EXAMPLES
jtrrouter -c <CONFIGURATION>
run with routing options defined in file
REPORTING BUGS
Report bugs at <https://github.com/eclipse/sumo/issues>.
Get in contact via <sumo@dlr.de>.
Build features: Linux-5.4.0-153-generic x86_64 GNU 13.1.0 None FMI Proj GUI Intl
SWIG GDAL FFmpeg OSG GL2PS Eigen
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Eclipse SUMO jtrrouter Version 1.18.0 is part of SUMO.
This program and the accompanying materials are made available under the terms of the
Eclipse Public License v2.0 which accompanies this distribution, and is available at
http://www.eclipse.org/legal/epl-v20.html
This program may also be made available under the following Secondary
Licenses when the conditions for such availability set forth in the Eclipse
Public License 2.0 are satisfied: GNU General Public License, version 2 or later which is
available at https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
SPDX-License-Identifier: EPL-2.0 OR GPL-2.0-or-later