Provided by: phast_1.6+dfsg-3_amd64 
NAME
msa_view - Provides various kinds of "views" of one or more multiple
DESCRIPTION
Provides various kinds of "views" of one or more multiple alignments. Can extract a
sub-alignment from an alignment (by row or by column) or combine several alignments into
one. Also can extract the sufficient statistics for phylogenetic analysis from an
alignment, optionally accounting for site categories that are defined by an auxiliary
annotations file. Supports various other functions, including gap stripping, column
randomization, and reordering of sequences. Capable of reading and writing in a few
common formats. Can be used for file conversion (by default, output is the entire input
alignment).
EXAMPLE
(See below for more details on options)
1. Convert alignment formats (default input and output is FASTA)
msa_view myfile.fa --out-format PHYLIP > myfile.ph
msa_view myfile2.raw --in-format MPM > myfile2.fa
2. Obtain a sub-alignment by position, using the coordinate frame of the first sequence in
the alignment.
msa_view myfile.fa --start 1234 --end 5678 --refidx 1 > mysub.fa
3. Obtain a sub-alignment by sequence.
msa_view myfile.fa --seqs 1,4,5 > seqs145.fa
msa_view myfile.fa --seqs 1,4,5 --exclude > seqs236.fa
(can also specify sequences by name, e.g., --seqs cow,rat,pig)
4. Concatenate alignments.
msa_view --aggregate human,mouse,rat myf1.fa myf2.fa myf3.fa > concat.fa
(source alignments may have different subsets of sequences and may use different sequence
orders; here, human,mouse,rat defines full set and order in output alignment)
5. Extract sufficient statistics from a FASTA file.
msa_view myfile.fa --out-format SS > myfile.ss
6. Extract sufficient statistics from a MAF file for a complete human chromosome. (Can be
used by phyloFit.)
msa_view chr1.maf --out-format SS > chr1.ss
7. As in (6), but include information about regions of the reference sequence not present
in the MAF file, and include a representation of the order in which alignment columns
occur (needed by programs such as phastCons or exoniphy).
msa_view chr1.maf --refseq chr1.fa --out-format SS > chr1.ordered.ss
8. As in (6), but collect statistics for pairs of adjacent sites (can be used by phyloFit
to estimate a dinucleotide model).
msa_view chr1.maf --out-format SS --tuple-size 2 > chr1.pairs.ss
9. Pool sufficient statistics from several human chromosomes.
msa_view --aggregate human,mouse,rat --out-format SS chr1.ss chr2.ss chr3.ss >
chr123.ss
10. Extract separate sufficient statistics for the three codon positions, as defined by
annotations in a GFF file.
msa_view chr1.maf --features chr22.gff --catmap "NCATS = 3; CDS 1-3" --out-format
SS > chr22.pos.ss
11. As in (10), but re-orient genes on - strand so that stats reflect + strand. Assume
genes are defined by tag "transcript_id".
msa_view chr1.maf --features chr22.gff --catmap "NCATS = 3; CDS 1-3"
--reverse-groups transcript_id --out-format SS > chr22.pos.ss
OPTIONS
Obtaining sub-alignments and combining alignments
--start, -s <start_col>
Starting column of sub-alignment (indexing starts with 1). Default is 1. Note
that coordinates use the frame of reference of the entire alignment unless --refidx
1 is specified.
--end, -e <end_col>
Ending column of sub-alignment.
Default is length of
alignment.
Note that coordinates use the frame of reference
of the entire alignment unless --refidx 1 is specified.
--seqs, -l <seq_list> Comma-separated list of sequences to include (default) exclude (if
--exclude). Indicate by sequence number or name (numbering starts with 1 and is
evaluated *after* --order is applied).
--exclude, -x
Exclude rather than include specified sequences.
--refidx, -r <ref_seq>
Index of reference sequence for coordinates.
Use 0 to
indicate the coordinate system of the alignment as a whole (this is the default).
--aggregate, -A <name_list>
(Not compatible with --start or --end) Create an aggregate alignment from a set of
alignment files, by concatenating individual alignments. If used with --out-format
SS and --unordered-ss, the aggregate alignment will never be created explicitly
(recommended for large data sets). The argument <name_list> must be a list of
sequence names, including all names in all specified alignments (missing sequences
will be replaced by rows of missing data). The standard <msa_fname> argument
should be replaced with a list of (whitespaceseparated) file names.
--split-all, -X <filename root>
Split output alignment into separate fasta files by species. File naming
convention is filename_root.species.fa. If used with --gap-strip, gap characters
will be stripped from all output files. In this case, '--gap-strip <s>' should NOT
be used (ALL or ANY should both work fine).
File formats, gap stripping, reordering, etc.
--in-format, -i PHYLIP|FASTA|MPM|MAF|SS
(Default is to guess format from file contents).
Input file
format.
FASTA is as usual. PHYLIP is compatible with the formats
used in the PHYLIP and PAML packages.
MPM is the format used by the
MultiPipMaker aligner and some other of Webb Miller's older tools. MAF ("Multiple
Alignment Format") is used by MULTIZ/TBA and the UCSC Genome Browser. SS is a
simple format describing the sufficient statistics for phylogenetic inference
(distinct columns or tuple of columns and their counts). Use --out-format SS with
--in-format MAF for best efficiency (explicit alignment is never created). Also,
use --unordered-ss if possible.
--out-format, -o PHYLIP|FASTA|MPM|SS (Default FASTA) Output file format.
--alphabet, -a <alphabet_string>
Use the specified alphabet (default "ACGT").
In addition,
'-' characters are assumed to represent alignment gaps, and '*' and 'N' characters
are allowed for missing data. Alphabetical letters not in the alphabet will be
converted to 'N's upon input. This option is ignored with SS input (alphabet
specified within SS files.)
--soft-masked, -f
Implies --alphabet 'ACGTNacgtn', useful for soft-masked sequences.
--unmask, -u
Remove soft-masking; convert to uppercase.
--pretty, -P Pretty-print alignment (use '.' when character matches corresponding
character in first sequence). Ignored if --out-format SS is selected.
--gap-strip, -G ALL|ANY|<s> Strip columns containing all gaps, any gaps, or a gap in the
specified sequence (<s>). Indexing starts at one and refers to the list *after*
any sequences have been added or subtracted (via --seqs and --exclude or --order).
--collapse-missing, -p
(For use with -o SS) Convert all missing-data characters and gaps to "*"
characters. Can be used to make sufficient statistics more compact, which can
improve the performance of phyloFit (all missing data and gap characters are
typically treated the same by phyloFit anyway).
--mark-missing, -K <maxlen> Convert all gaps of length greater than <maxlen> to "*"
characters. If --refidx is specified (with a positive index), gaps in the
designated reference sequence will not be altered. This is a useful heuristic for
distinguishing between microindels and regions of missing data (e.g., due to
large-scale indels, incomplete assemblies, or highly diverged sequences).
--missing-as-indels, -m
Convert all missing data characters (Ns and *s) to gap characters, except for Ns in
a reference sequence specified by --refidx, which will be replaced by randomly
selected nucleotides. (This allows the coordinate frame for the reference sequence
to be maintained; this option is only recommended if such Ns are rare.) If
--refidx is not used, all Ns will be replaced by gaps. You may want to use
--gap-strip ALL with this option.
--order, -O <name_list> Change order of rows in alignment to match sequence names
specified in name_list. If a name appears in name_list but not in the alignment, a
row of gaps will be inserted. This option is applied to the alignment *before*
--seqs, --refidx, and --gap-strip are applied.
--reverse-complement, -V
Reverse complement output alignment.
--randomize, -R Randomly permute the columns of the source alignment (done *before* taking
sub-alignment). Requires an ordered representation of the alignment (careful using
with --in-format SS|MAF -- will create full alignment from sufficient statistics).
--fill-Ns, -N <s:b-e>
Fill sequence no. <s> with Ns, from <b> to <e>. Applied before --start, --end,
--seqs, --gap-strip, but after --order. Coordinate frame depends on --refidx. Can
be used multiple times.
--summary-only -S Report only summary statistics, rather than complete alignment.
Statistics are for alignment that would otherwise be output (i.e., after other
options have been applied).
--window-summary, -w <win_size> Like -S, but output summary statistics for non-overlapping
windows of the specified size. (Sufficient statistics)
--tuple-size, -T <tup_size> (For use with --out-format SS). Represent an alignment in
terms of tuples of columns of the designated size. Useful
with context-dependent phylogenetic models.
--unordered-ss, -z
(For use with --out-format SS).
Suppress the portion of the
sufficient statistics concerned with the order in which columns appear. Useful for
analyses for which order is unimportant. (MAF input)
--refseq, -M <fname>
Read the complete text of the reference sequence from <fname> (FASTA format) and
combine it with the contents of the MAF file to produce a complete, ordered
representation of the alignment (unaligned regions will be represented by gaps).
Best used with --out-format SS. The reference sequence of the MAF file is assumed
to be the one that appears first in each block.
--keep-overlapping, -k
Keep blocks in MAF that have overlapping coordinates in the reference (1st)
sequence (by default, only the first one is kept). Useful in extracting unordered
stats from a jumbled collection of MAF blocks (e.g., output of Jim Kent's mafFrags
program). Cannot be used with --refseq, --features, or
--cats-cycle. (Site categories: all options require --out-format SS)
--features, -g <gff_fname>
(Requires --catmap) Read sequence annotations from the specified file (GFF) and
label the columns of the alignment accordingly. Note: UCSC BED and genepred
formats are now recognized as well.
--catmap, -c <fname>|<string>
(optionally use with --features) Mapping of feature types to category numbers. Can
either give a filename or an "inline" description of a simple category map, e.g.,
--catmap "NCATS = 3 ; CDS 1-3" or --catmap "NCATS = 1 ; UTR 1".
--cats-cycle, -Y <cycle_size> (alternative to --features and --catmap) Assign site
categories in cycles of the specified size, e.g., as 1,2,3,...,1,2,3 (for
cycle_size == 3). Useful for in-frame coding sequence, or to partition a data set
into nonoverlapping tuples of columns (use with --do-cats).
--do-cats, -C <cat_list>
(For use with --features or --cats-cycle)
Obtain
sufficient statistics only for the specified categories (comma-delimited list, by
number).
--codons, -D Extract sufficient statistics for in-frame codons. Implies --tuple-size 3
--cats-cycle 3 --do-cats 3. Not appropriate
for use with --features/--catmap.
--reverse-groups, -W <tag>
(For use with --features) Group features by <tag> (e.g., "transcript_id" or
"exon_id") and reverse complement segments of the alignment corresponding to groups
on the reverse strand. Groups must be non-overlapping (see refeature --unique).
Useful when extracting sufficient statistics for strand-specific site categories
(e.g., codon positions).
--4d, -4
(For use with --features; assumes coding regions have feature type 'CDS') Extract
sufficient statistics for fourfold degenerate synonymous sites. Implies
--out-format SS --unordered-stats --tuple-size 3 --reverse-groups transcript_id.
Alignment cleaning
--clean-coding, -L <seqname>
Clean an alignment of coding sequences with respect to a named reference sequence.
Removes sites with gaps and blocks of gapless sites smaller than 10 codons in
length, ensures everything is in-frame wrt reference sequence, prohibits in-frame
stop codons. Reference sequence must begin with a start codon and end with a stop
codon.
--clean-indels, -I <nseqs>
Clean an alignment with special attention to indels.
Sites
with fewer than <nseqs> bases are removed; bases adjacent to indels, and short
gapless subsequences, are replaced with Ns. If used with --tuple-size, then
<tup_size>-1 columns of Ns will be retained between columns not adjacent in the
original alignment. Frame is not considered.
Other
--help, -h Print this help message.