Provided by: nfstest_3.2-2_all 
NAME
nfstest_delegation - Delegation tests
SYNOPSIS
nfstest_delegation --server <server> [--client <client>] [options]
DESCRIPTION
Basic delegation tests verify that a correct delegation is granted when opening a file for
reading or writing. Also, another OPEN should not be sent for the same file when the
client is holding a delegation. Verify that the stateid of all I/O operations should be
the delegation stateid. Reads from a different process on the same file should not cause
the client to send additional READ packets when the client is holding a read delegation.
Furthermore, a LOCK packet should not be sent to the server when the client is holding a
delegation.
Recall delegation tests verify the delegation is recalled when a conflicting operation is
sent to the server from a different client. Conflicting operations are reading, writing,
removing, renaming and changing the permissions on the same file. Note that reading a file
from a different client can only recall a write delegation. Removing the delegated file
from a different client recalls the delegation and the server may or may not allow any
more writes from the client after the delegation has been returned. Renaming either the
delegated file (as source) or into the delegated file (as target) recalls the delegation.
In the case where the delegated file is the target of rename, the existing target is
removed before the rename occurs, therefore the server may or may not allow nay more
writes from the client after the delegation has been removed just like in the case when
removing the delegated file.
Also, verify that a read delegation is not recalled when a different client is granted a
read delegation. After a delegation is recalled, the client may send an OPEN with
CLAIM_DELEGATE_CUR before returning the delegation specially when there is a open pending
on the client. In addition, the stateid returned by the new open should be the same as the
original OPEN stateid. Also, a delegation should not be granted when re-opening the file
before returning the delegation. The client may flush all written data before returning
the WRITE delegation. The LOCK should be sent as well before returning a delegation which
has been recalled. Finally, a delegation should not be granted on the second client who
cause the delegation recall on the first client.
OPTIONS
--version
show program's version number and exit
-h, --help
show this help message and exit
-f FILE, --file=FILE
File where options are specified besides the system wide file /etc/nfstest, user
wide file $HOME/.nfstest or in the current directory .nfstest file
NFS specific options:
-s SERVER, --server=SERVER
Server name or IP address
-e EXPORT, --export=EXPORT
Exported file system to mount [default: '/']
--nfsversion=NFSVERSION
NFS version, e.g., 3, 4, 4.1, etc. [default: 4.1]
-m MTPOINT, --mtpoint=MTPOINT
Mount point [default: '/mnt/t']
-p PORT, --port=PORT
NFS server port [default: 2049]
--proto=PROTO
NFS protocol name [default: 'tcp']
--sec=SEC
Security flavor [default: 'sys']
--nconnect=NCONNECT
Multiple TCP connections option [default: '1']
-o MTOPTS, --mtopts=MTOPTS
Mount options [default: 'hard,rsize=4096,wsize=4096']
--datadir=DATADIR
Data directory where files are created, directory is created on the mount point
[default: '']
Logging options:
-v VERBOSE, --verbose=VERBOSE
Verbose level for debug messages [default: 'opts|info|dbg1|dbg2|dbg3']
--tverbose=TVERBOSE
Verbose level for test messages [default: '1']
--createlog
Create log file
--rexeclog
Create rexec log files
--warnings
Display warnings
--tag=TAG
Informational tag, it is displayed as an INFO message [default: '']
--notty
Do not use terminal colors on output
--isatty
Use terminal colors on output -- useful when running with nohup
Packet trace options:
--createtraces
Create a packet trace for each test
--tbsize=TBSIZE
Capture buffer size for tcpdump [default: 192k]
--trcdelay=TRCDELAY
Seconds to delay before stopping packet trace [default: 2.0]
--keeptraces
Do not remove any trace files [default: remove trace files if no errors]
--rmtraces
Remove trace files [default: remove trace files if no errors]
-i INTERFACE, --interface=INTERFACE
Device interface [default: automatically selected]
File options:
--nfiles=NFILES
Number of files to create [default: 2]
--filesize=FILESIZE
File size to use for test files [default: 64k]
--rsize=RSIZE
Read size to use when reading files [default: 4k]
--wsize=WSIZE
Write size to use when writing files [default: 4k]
--iodelay=IODELAY
Seconds to delay I/O operations [default: 0.1]
--offset-delta=OFFSET_DELTA
Read/Write offset delta [default: 4k]
Path options:
--sudo=SUDO
Full path of binary for sudo [default: '/usr/bin/sudo']
--kill=KILL
Full path of binary for kill [default: '/usr/bin/kill']
--nfsstat=NFSSTAT
Full path of binary for nfsstat [default: '/usr/sbin/nfsstat']
--tcpdump=TCPDUMP
Full path of binary for tcpdump [default: '/usr/sbin/tcpdump']
--iptables=IPTABLES
Full path of binary for iptables [default: '/usr/sbin/iptables']
--messages=MESSAGES
Full path of log messages file [default: '/var/log/messages']
--trcevents=TRCEVENTS
Full path of tracing events directory [default: '/sys/kernel/debug/tracing/events']
--trcpipe=TRCPIPE
Full path of trace pipe file [default: '/sys/kernel/debug/tracing/trace_pipe']
--tmpdir=TMPDIR
Temporary directory [default: '/tmp']
Debug options:
--nocleanup
Do not cleanup created files
--notimestamps
Do not display timestamps in debug messages
--bugmsgs=BUGMSGS
File containing test messages to mark as bugs if they failed
--nomount
Do not mount server and run the tests on local disk space
--basename=BASENAME
Base name for all files and logs [default: automatically generated]
--nfsdebug=NFSDEBUG
Set NFS kernel debug flags and save log messages [default: '']
--rpcdebug=RPCDEBUG
Set RPC kernel debug flags and save log messages [default: '']
--tracepoints=TRACEPOINTS
List of trace points modules to enable [default: '']
--nfsstats
Get NFS stats [default: 'False']
--pktdisp
Display main packets related to the given test
--nfserrors
Fail every NFS error found in the packet trace
--client-ipaddr=CLIENT_IPADDR
IP address of localhost
Reporting options:
--xunit-report
Generate xUnit compatible test report
--xunit-report-file=XUNIT_REPORT_FILE
Path to xout report file
Test options:
--runtest=RUNTEST
Comma separated list of tests to run, if list starts with a '^' then all tests are
run except the ones listed [default: 'all']
--client=CLIENT
Remote NFS client and options used for recall delegation tests. Clients are
separated by a ',' and each client definition is a list of arguments separated by a
':' given in the following order if positional arguments is used (see examples):
clientname:server:export:nfsversion:port:proto:sec:mtpoint [default:
'nfsversion=3:proto=tcp:port=2049']
--client-nfsvers=CLIENT_NFSVERS
Comma separated list of valid NFS versions to use in the --client option. An NFS
version from this list, which is different than that given by --nfsversion, is
selected and included in the --client option [default: 4.0,4.1]
--lock-offset=LOCK_OFFSET
Starting offset for lock [default: 0]
--lock-poffset=LOCK_POFFSET
Starting offset for lock on pending open [default: 8192]
--lock-len=LOCK_LEN
Number of bytes to lock [default: 4096]
--truncate
Truncate file when writing from the second file for the recall tests
--setup-delay=SETUP_DELAY
Seconds to delay after setup so all opens are released [default: 4.0]
TESTS
basic
Run all basic delegation tests: basic01, basic02, basic03, basic04,
basic05, basic06, basic07, basic08, basic09, basic10, basic11, basic12
stat
Run all basic delegation tests with file stat: basic03, basic04,
basic09, basic10
lock
Run all basic delegation tests with file lock: basic05, basic06,
basic11, basic12
basic01
Basic read delegation test
basic02
Basic write delegation test
basic03
Basic read delegation test with file stat
basic04
Basic write delegation test with file stat
basic05
Basic read delegation test with file lock
basic06
Basic write delegation test with file lock
basic07
Basic write delegation test using RDWR open while reading
basic08
Basic write delegation test using RDWR open while writing
basic09
Basic write delegation test using RDWR open while reading with file stat
basic10
Basic write delegation test using RDWR open while writing with file stat
basic11
Basic write delegation test using RDWR open while reading with file lock
basic12
Basic write delegation test using RDWR open while writing with file lock
recall
Run all recall delegation tests: recall01, recall02, recall03, recall04,
recall05, recall06, recall07, recall08, recall09, recall10, recall11,
recall12, recall13, recall14, recall15, recall16, recall17, recall18,
recall19, recall20, recall21, recall22, recall23, recall24, recall25,
recall26, recall27, recall28, recall29, recall30, recall31, recall32,
recall33, recall34, recall35, recall36, recall37, recall38, recall39,
recall40, recall41, recall42, recall43, recall44, recall45, recall46,
recall47, recall48, recall49, recall50, recall51, recall52, recall53,
recall54
setattr
Run all tests using SETATTR to recall the delegation: recall07,
recall08, recall09, recall10, recall35, recall36, recall37, recall38
remove
Run all tests recalling the delegation by removing the delegated file:
recall11, recall12, recall13, recall14, recall39, recall40, recall41,
recall42
rename
Run all tests recalling the delegation by renaming the delegated file:
recall15, recall16, recall17, recall18, recall19, recall20, recall21,
recall22, recall43, recall44, recall45, recall46, recall47, recall48,
recall49, recall50
pending
Run all recall delegation tests having a pending open: recall23,
recall24, recall25, recall26, recall51, recall52, recall53, recall54
recall01
Recall read delegation by writing from a second client
recall02
Recall write delegation by writing from a second client
recall03
Recall read delegation by writing from a second client with file lock
recall04
Recall write delegation by writing from a second client with file lock
recall05
Recall write delegation by reading from a second client
recall06
Recall write delegation by reading from a second client with file lock
recall07
Recall read delegation by changing the permissions to the file
recall08
Recall write delegation by changing the permissions to the file
recall09
Recall read delegation by changing the permissions to the file with file lock
recall10
Recall write delegation by changing the permissions to the file with file lock
recall11
Recall read delegation by removing the file
recall12
Recall write delegation by removing the file
recall13
Recall read delegation by removing the file with file lock
recall14
Recall write delegation by removing the file with file lock
recall15
Recall read delegation by renaming the file
recall16
Recall write delegation by renaming the file
recall17
Recall read delegation by renaming the file with file lock
recall18
Recall write delegation by renaming the file with file lock
recall19
Recall read delegation by renaming into the file
recall20
Recall write delegation by renaming into the file
recall21
Recall read delegation by renaming into the file with file lock
recall22
Recall write delegation by renaming into the file with file lock
recall23
Recall read delegation by writing from a second client with file lock,
having a pending read open
recall24
Recall read delegation by writing from a second client with file lock,
having a pending write open.
Delegation is returned by the client when the second open is done so
there is no delegation recall
recall25
Recall write delegation by writing from a second client with file lock,
having a pending read open
recall26
Recall write delegation by writing from a second client with file lock,
having a pending write open
recall27
Recall write delegation by reading from a second client using RDWR
open while reading
recall28
Recall write delegation by reading from a second client using RDWR
open while writing
recall29
Recall write delegation by writing from a second client using RDWR
open while reading
recall30
Recall write delegation by writing from a second client using RDWR
open while writing
recall31
Recall write delegation by reading from a second client using RDWR
open while reading with file lock
recall32
Recall write delegation by reading from a second client using RDWR
open while writing with file lock
recall33
Recall write delegation by writing from a second client using RDWR
open while reading with file lock
recall34
Recall write delegation by writing from a second client using RDWR
open while writing with file lock
recall35
Recall write delegation by changing the permissions to the file
from a second client using RDWR open while reading
recall36
Recall write delegation by changing the permissions to the file
from a second client using RDWR open while writing
recall37
Recall write delegation by changing the permissions to the file
from a second client using RDWR open while reading with file lock
recall38
Recall write delegation by changing the permissions to the file
from a second client using RDWR open while writing with file lock
recall39
Recall write delegation by removing the file from a second client
using RDWR open while reading
recall40
Recall write delegation by removing the file from a second client
using RDWR open while writing
recall41
Recall write delegation by removing the file from a second client
using RDWR open while reading with file lock
recall42
Recall write delegation by removing the file from a second client
using RDWR open while writing with file lock
recall43
Recall write delegation by renaming the file from a second client
using RDWR open while reading
recall44
Recall write delegation by renaming the file from a second client
using RDWR open while writing
recall45
Recall write delegation by renaming the file from a second client
using RDWR open while reading with file lock
recall46
Recall write delegation by renaming the file from a second client
using RDWR open while writing with file lock
recall47
Recall write delegation by renaming the file from a second client
using RDWR open while reading
recall48
Recall write delegation by renaming the file from a second client
using RDWR open while writing
recall49
Recall write delegation by renaming the file from a second client
using RDWR open while reading with file lock
recall50
Recall write delegation by renaming the file from a second client
using RDWR open while writing with file lock
recall51
Recall write delegation by writing from a second client using RDWR
open while reading with file lock, having a pending read open
recall52
Recall write delegation by writing from a second client using RDWR
open while reading with file lock, having a pending write open
recall53
Recall write delegation by writing from a second client using RDWR
open while writing with file lock, having a pending read open
recall54
Recall write delegation by writing from a second client using RDWR
open while writing with file lock, having a pending write open
read_deleg
Run all read delegation tests: basic01, basic03, basic05, recall01,
recall03, recall07, recall09, recall11, recall13, recall15, recall17,
recall19, recall21, recall23, recall24
write_deleg
Run all write delegation tests: basic02, basic04, basic06, basic07,
basic08, basic09, basic10, basic11, basic12, recall02, recall04,
recall05, recall06, recall08, recall10, recall12, recall14, recall16,
recall18, recall20, recall22, recall25, recall26, recall27, recall28,
recall29, recall30, recall31, recall32, recall33, recall34, recall35,
recall36, recall37, recall38, recall39, recall40, recall41, recall42,
recall43, recall44, recall45, recall46, recall47, recall48, recall49,
recall50, recall51, recall52, recall53, recall54
all
Run all tests: basic01, basic02, basic03, basic04, basic05, basic06,
basic07, basic08, basic09, basic10, basic11, basic12, recall01,
recall02, recall03, recall04, recall05, recall06, recall07, recall08,
recall09, recall10, recall11, recall12, recall13, recall14, recall15,
recall16, recall17, recall18, recall19, recall20, recall21, recall22,
recall23, recall24, recall25, recall26, recall27, recall28, recall29,
recall30, recall31, recall32, recall33, recall34, recall35, recall36,
recall37, recall38, recall39, recall40, recall41, recall42, recall43,
recall44, recall45, recall46, recall47, recall48, recall49, recall50,
recall51, recall52, recall53, recall54
EXAMPLES
Run the basic delegation tests (no client option):
nfstest_delegation --server 192.168.0.2 --export /exports
Use short options instead:
nfstest_delegation -s 192.168.0.2 -e /exports
Run both the basic and recall tests using positional arguments with nfsversion=3 for the
second client:
nfstest_delegation -s 192.168.0.2 -e /exports --client 192.168.0.10:::3
Use named arguments instead:
nfstest_delegation -s 192.168.0.2 -e /exports --client 192.168.0.10:nfsversion=3
NOTES
The user id in the local host and the host specified by --client must have access to run
commands as root using the 'sudo' command without the need for a password.
The user id must be able to 'ssh' to remote host without the need for a password.
SEE ALSO
nfstest.test_util(3), nfstest_alloc(1), nfstest_cache(1), nfstest_dio(1), nfstest_fcmp(1),
nfstest_file(1), nfstest_interop(1), nfstest_io(1), nfstest_lock(1), nfstest_pkt(1),
nfstest_pnfs(1), nfstest_posix(1), nfstest_rdma(1), nfstest_sparse(1), nfstest_ssc(1),
nfstest_xattr(1), nfstest_xid(1), packet.nfs.nfs3_const(3), packet.nfs.nfs4_const(3)
BUGS
No known bugs.
AUTHOR
Jorge Mora (mora@netapp.com)