Provided by: netpbm_11.01.00-2build1_amd64 
NAME
pamstereogram - create a single-image stereogram from a PAM depth map
SYNOPSIS
pamstereogram [-help] [-verbose] [-blackandwhite | -grayscale | -color] [-maxval=value]
[-patfile=pamfile] [-texfile=pamfile] [-bgcolor=color] [-smoothing=pixels]
[-xbegin=pixels] [-xshift=pixels] [-yshift=pixels] [-yfillshift pixels]
[-magnifypat=scale] [-guidetop] [-guidebottom] [-guidesize=pixels] [-dpi=resolution]
[-crosseyed] [-makemask] [-eyesep=inches] [-depth=fraction]
[-planes=near_pixels,far_pixels] [-randomseed=integer] [-tileable] [infile]
DESCRIPTION
This program is part of Netpbm(1).
pamstereogram inputs a depth map (a map of the distances from your eye of the points in a
scene) and outputs a single-image stereogram (SIS). A SIS is a 2-D image specially
designed to appear three dimensional when viewed with relaxed, slightly unfocused eyes.
What's exciting about single-image stereograms is that they don't require special glasses
to view, although it does require a bit of practice to train your eyes to unfocus
properly. The pamstereogram program provides a wealth of control over how the stereogram
is generated, including the following:
• black and white, grayscale, or color output
• single-image random-dot stereograms (SIRDS), single-image stereograms (SIS) using a
tiled image, or mapped-texture stereograms (MTS)
• images targeting a given device resolution and eye separation
• optional guide boxes to assist in focusing
• the ability to trade off depth levels for easier viewing
• choice of wall-eyed or cross-eyed stereograms
The output is a PAM image on standard output. Options control the exact format of the
PAM. If you want a PNM (PBM, PGM, or PPM) image, use pamtopnm on the output. There is no
need to convert if you will use the image as input to a current Netpbm program, but many
other programs don't know what a PAM is.
To make a red/cyan type of stereogram (that you view with 3-D glasses) instead, see ppm3d.
OPTIONS
You may use either single or double hyphens to denote options. You may use either
whitespace or an equals sign to separate an option name from its value.
In addition to the options common to all programs based on libnetpbm (most notably -quiet,
see
Common Options ⟨index.html#commonoptions⟩ ), pamstereogram recognizes the following
command line options:
-verbose
Display messages about image sizes and formats and properties of the stereogram
being generated.
-blackandwhite
Produce a single-image random-dot black-and-white stereogram. This is the default.
-grayscale
Produce a single-image random-dot grayscale stereogram.
-color Produce a single-image random-dot color stereogram.
-maxval=value
Designate the maximum value of each gray/color component, i.e. the color
resolution. Smaller values make the output image have smaller numbers of unique
grays/colors. If you don't specify -maxval, pamstereogram uses the maxval of the
input image. This option has no effect with -blackandwhite.
-patfile=pamfile
Specify an image to use as a repeated background pattern for the stereogram instead
of a random-dot pattern. Intricate images generally produce a crisper 3-D effect
that simpler images. The output file will have the same maxval and format (black
and white, grayscale or color) as the pattern file. You cannot specify the -patfile
option along with -blackandwhite, -grayscale, -color, or -maxval. The -verbose
option will give you information on the ideal dimensions of the pattern file.
-xbegin=pixels
Specify the horizontal coordinate at which to begin stereogram generation. The
background pattern will be minimally distorted at this point and more distorted at
greater distances. Consider using this in conjunction with -xshift to align the
horizontal start of the pattern with the horizontal start of stereogram generation.
-xbegin is meaningful only in conjunction with -patfile, -makemask, or -texfile,
and pamstereogram actually ignores it with respect to -texfile (but may not in a
future version of pamstereogram).
The default is to begin in the center.
This option was new in Netpbm 10.71 (June 2015).
-texfile=pamfile
Specify an image to use as the texture for a mapped-texture stereogram. The idea
is that the depth-map image provides the depth values of the 3-D object/scene while
the texture image provides the true-color values. Consequently, the texture image
should align with the depth-map image. (Note that it's required to have the same
dimensions.) The texture image's background color is ignored when blending colors.
This option was new in Netpbm 10.53 (December 2010).
-bgcolor=color
Use color as the texture image's background color instead of letting pamstereogram
determine it automatically. Specify the color as described for the argument of the
pnm_parsecolor() library routine ⟨libnetpbm_image.html#colorname⟩ . The -bgcolor
option is meaningful only in conjunction with -texfile.
This option was new in Netpbm 10.53 (December 2010).
-smoothing=pixels
When used without -texfile, attempt to eliminate artifacts introduced by edges in
the depth map if pixels is greater than zero.
When used with -texfile, horizontally blur non-background colors into background
pixels up to a distance of pixels pixels. This helps smooth over distracting
glitches introduced by the stereogram's color constraints when producing a mapped-
texture stereogram. In this case, the -smoothing option is helpful when the
texture image includes smooth color transitions (as in a photograph) but makes
crisp texture images (as in a line drawing) appear blurry.
This option was new in Netpbm 10.53 (December 2010). Before Netpbm 10.61 (December
2012), it has no effect without -texfile.
-xshift=pixels
Shift the pattern image (designated by -patfile) to the right by pixels pixels
(default: 0).
This option is valid only along with -patfile.
-yshift pixels
Shift the pattern image (designated by -patfile) downwards by pixels pixels
(default: 0). This option is valid only along with -patfile.
-yfillshift pixels
Shift the pattern image (designated by -patfile) downwards by pixels pixels
(default: 0) but only after the initial population of the pattern. (If used with
-yshift the resulting shifts are summed.) A small -yfillshift helps reduce visual
artifacts in the 3-D image. Steer's website, referenced under SEE ALSO ⟨#seealso⟩
, recommends a shift of approximately 1/16" (6-7 pixels at pamstereogram's default
of 100 DPI).
This option was new in Netpbm 10.94 (March 2021).
-magnifypat=scale
Magnify each pixel in the pattern file or each random dot by integral scaling
factor scale. Note that pamstereogram applies the pattern magnification after
pattern shifting (-xshift and -yshift).
-guidebottom
Draw a pair of black squares on a white background underneath the stereogram
proper. These squares help you guide your eyes into proper focus to view the 3-D
image. The trick is to focus your eyes some distance behind the image, causing you
to see four black squares, then continue altering your focus distance until the
middle two black squares fuse into a single black square. At that point, a crisp,
3-D image will appear.
This option was new in Netpbm 10.61 (December 2012). Before that, the presence of
-guidesize, with a positive value, has the same effect.
-guidetop
Same as -guidebottom, except the guides go at the top of the image.
This option was new in Netpbm 10.61 (December 2012). Before that, the presence of
-guidesize, with a negative value, has the same effect.
-guidesize=pixels
The size (width and height) of each guide box.
This is valid only with -guidetop or -guidebottom.
Default is 20.
Before Netpbm 10.61 (December 2012), if you don't specify this option,
pamstereogram draws no guides. If you specify it with a positive value,
pamstereogram behaves as if you specified -guidebottom too, and if you specify it
with a negative value, it behaves as if you specified -guidetop and specified
guidesize with the absolute value of that negative value.
-dpi=resolution
Specify the resolution of the output device in dots per inch. The default is 100
DPI, which represents a fairly crisp screen resolution.
Before Netpbm 10.53 (December 2010), the default was 96 DPI.
-crosseyed
Invert the gray levels in the depth map (input image) so that the 3-D image pops
out of the page where it would otherwise sink into the page and vice versa. Some
people are unable to diverge their eyes and can only cross them. The -crosseyed
option enables such people to see the 3-D image as intended. You can also specify
the -crosseyed option if you prefer using depth maps in which darker colors are
closer to the eye and lighter colors are farther from the eye.
Before Netpbm 10.53 (December 2010), pamstereogram used higher (lighter) numbers
for things closer to the eye without -crosseyed and vice versa.
-makemask
Instead of a stereogram, output a PAM mask image showing coloring constraints. New
pixels will be taken from the pattern file where the mask is black. Copies of
existing pixels will be taken from the pattern file where the mask is white. The
-makemask option can be used to help create more sophisticated pattern files (to
use with -patfile) Note that -makemask ignores -magnifypat; it always produces
masks that assume a pattern magnification of 1.
-eyesep=inches
Specify the separation in inches between your eyes. The default, 2.5 inches (6.4
cm), should be sufficient for most people and probably doesn't need to be changed.
-depth=fraction
Specify the output image's depth of field. That is, fraction represents the
fractional distance of the near plane from the far plane. Smaller numbers make the
3-D image easier to perceive but flatter. Larger numbers make the 3-D image more
difficult to perceive but deeper. The default, 0.3333, generally works fairly well.
-planes=near_pixels,far_pixels
Explicitly specify the distance between repeated pixels in the near plane and in
the far plane. This is an alternative to -eyesep and -depth. The following
equalities hold:
• eyesep = 2 * far
• depth = 2 * (far - near) /
(2 * far - near)
The number of distinct 3-D depths is far - near + 1. One might say that -eyesep
and -depth are a more human-friendly way to specify stereoscopic parameters
(distance between eyes and tradeoff between perceptibility and depth) while -planes
is a more computer-centric way (pixel distances in the resulting stereogram).
This option was new in Netpbm 10.59 (June 2012).
-randomseed=integer
Specify a seed to be used for the random number generator. The default is to use a
seed based on the time of day, to one second granularity.
It is useful to specify the seed if you want to create reproducible results. With
the same random seed, you should get identical results every time you run
pamstereogram.
This is irrelevant if you use a pattern file (-patfile option), because there is no
random element to pamstereogram's behavior.
This option was new in Netpbm 10.32 (February 2006).
-tileable
Make the generated image horizontally tileable. This works by blending a left-to-
right rendering (the equivalent of -xbegin=0) with a right-to-left rendering (the
equivalent of -xbegin=width-1).
This option was new in Netpbm 10.91 (June 2020).
PARAMETERS
The only parameter, infile, is the name of an input file that is a depth map image. If you
don't specify infile, the input is from standard input.
The input is a PAM image of depth 1. Each sample represents the distance from the eye that
the 3-D image at that location should be. Lower (darker) numbers mean further from the
eye.
NOTES
Input Images
pamstereogram pays no attention to the image's tuple type and ignores all planes other
than plane 0.
Like any Netpbm program, pamstereogram will accept PNM input as if it were the PAM
equivalent.
Mapped-texture Stereograms
In a mapped-texture stereogram (MTS), the 3-D image can be drawn with true colors. Unlike
a SIRDS or tiled-image SIS, however, the image portrayed by an MTS is apparent in normal
2-D viewing. It appears repeated multiple times and overlapped with itself, but it is not
hidden.
You create an MTS with pamstereogram by passing the filename of a PAM "texture image" with
a -texfile option. A texture image portrays the same 3-D object as the depth-map image
but indicates the colors that the program should apply to the object.
pamstereogram ignores the texture image's background color when it overlaps copies of the
3-D object. This prevents, for example, a bright-red object on a black background from
being drawn as a dark-red object (a blend of 50% bright red and 50% black); instead, the
program ignores the black and the object remains bright red. A consequence of this
feature is that an MTS looks best when the objects in the texture image have a crisp
outline. Smooth transitions to the background color result in unwanted color artifacts
around edges because the program ignores only exact matches with the background color.
You should specify a larger-than-normal value for -eyesep (and/or -dpi) when producing an
MTS. Otherwise, the 3-D object will repeat so many times that most colored pixels will
overlap other colored pixels, reducing the number of true-colored pixels that remain.
An MTS can employ a background pattern (-patfile). In this case, pamstereogram replaces
background pixels with pattern pixels in the final step of generating the image.
Miscellaneous
A good initial test is to input an image consisting of a solid shape of distance 0 within
a large field of maximum distance (e.g., a white square on a black background).
With the default values for -dpi and -eyesep, pattern images that are 128 pixels wide can
tile seamlessly.
EXAMPLES
Generate a SIRDS out of small, brightly colored squares and prepare it for display on an
87 DPI monitor:
pamstereogram depthmap.pam \
-dpi 87 -verbose -color -maxval 1 -magnifypat 3 \
>3d.pam
Generate a SIS by tiling a PPM file (a prior run with -verbose indicates how wide the
pattern file should be for seamless tiling, although any width is acceptable for producing
SISes):
pamstereogram depthmap.pam -patfile mypattern.ppm >3d.pam
Generate an MTS by associating colors with a depth-mapped object (using a large eye
separation to reduce the number of repetitions of the texture image) and twice smoothing
over background-colored speckles:
pamstereogram depthmap.pam \
-texfile colormap.pam -smoothing 2 -eyesep 3.5 \
>3d.pam
SEE ALSO
•
pam(1)
•
pamsistoaglyph(1)
•
ppm3d(1)
• Harold W. Thimbleby, Stuart Inglis, and Ian H. Witten. Displaying 3D Images:
Algorithms for Single Image Random Dot Stereograms. In IEEE Computer, 27(10):38-48,
October 1994. DOI: 10.1109/2.318576 ⟨http://dx.doi.org/10.1109/2.318576⟩ .
• W. A. Steer. Stereograms: Technical Details. URL:
http://www.techmind.org/stereo/stech.html(1).
HISTORY
pamstereogram was new in Netpbm 10.22 (April 2004), but probably broken beyond usability
until Netpbm 10.32 (February 2006) and Netpbm 10.26.23 (January 2006).
A backward incompatible change to the way you request guide boxes (-guidetop,
-guidebottom, -guidesize happened in Netpbm 10.61 (December 2012).
AUTHOR
Copyright © 2006-2020 Scott Pakin, scott+pbm@pakin.org.
Table Of Contents
•
SYNOPSIS ⟨#synopsis⟩
•
DESCRIPTION ⟨#description⟩
•
OPTIONS ⟨#options⟩
•
PARAMETERS ⟨#parameters⟩
•
NOTES ⟨#notes⟩
•
Input Images ⟨#inputimages⟩
•
Mapped-texture Stereograms ⟨#mappedtexture⟩
•
Miscellaneous ⟨#notes_misc⟩
•
EXAMPLES ⟨#examples⟩
•
SEE ALSO ⟨#seealso⟩
•
HISTORY ⟨#history⟩
•
AUTHOR ⟨#author⟩
DOCUMENT SOURCE
This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master
documentation is at
http://netpbm.sourceforge.net/doc/pamstereogram.html