Provided by: percona-toolkit_3.2.1-1_all 
NAME
pt-upgrade - Verify that query results are identical on different servers.
SYNOPSIS
Usage: pt-upgrade [OPTIONS] LOGS|RESULTS DSN [DSN]
pt-upgrade executes queries in the given MySQL "LOGS" on each "DSN", compares the results,
and reports any significant differences. The tool can also save the results for later
analyses. "LOGS" can be slow, general, binary, tcpdump, and "raw".
Compare host2 to host1 using queries in "slow.log":
pt-upgrade h=host1 h=host2 slow.log
Compare host2 to saved results from host1:
pt-upgrade h=host1 --save-results host1_results/ slow.log
pt-upgrade host1_results1/ h=host2
RISKS
Percona Toolkit is mature, proven in the real world, and well tested, but all database
tools can pose a risk to the system and the database server. Before using this tool,
please:
• Read the tool's documentation
• Review the tool's known "BUGS"
• Test the tool on a non-production server
• Backup your production server and verify the backups
DESCRIPTION
pt-upgrade helps determine if it is safe to upgrade (or downgrade) to a new version of
MySQL. A safe and conservative upgrade plan has several steps, one of which is ensuring
that queries will produce identical results on the new version of MySQL.
pt-upgrade executes queries from slow, general, binary, tcpdump, and "raw" logs on two
servers, compares many aspects of each query's exeuction and results, and reports any
significant differences. The two servers are typically development servers, one running
the current production version of MySQL and the other running the new version of MySQL.
USE CASES
pt-upgrade has two use cases. The first, canonical case is running "host to host". A log
file and two DSN are given on the command line, one for each MySQL server. See the first
example in the "SYNOPSIS". Queries are executed and compared on each server as the tool
runs. Queries with differences are printed as the tool runs, or when it finishes (see
"WHEN QUERIES ARE REPORTED"). Nothing is saved to disk, so this use case requires less
hard disk space, but the queries must be executed on both servers if the tool is ran
again, even if one of the servers hasn't changed. If there are a lot of queries or
executing them takes a long time, and one server doesn't change, you may want to use the
second use case.
The second use case is running "reference results to host". Reference results are the
complete results from a single MySQL server, saved to disk. In this case, you must first
generate the reference results with "--save-results", then run the tool a second time to
compare another MySQL server to the results. See the second example in the "SYNOPSIS".
Results are typically generated for the current version of MySQL which doesn't change.
This use case can require a lot of disk space because the results (i.e. rows) for all
queries must be saved, plus other data about the queries. If you plan to do many
comparisons against a fixed version of MySQL, this use case is more efficient. Or if you
don't have access to both servers at the same time, this use case allows you to "execute
now, compare later".
IMPORTANT CONSIDERATIONS
CONSISTENCY
Consistent environments and consistent data are crucial for obtaining an accurate report.
pt-upgrade should never be ran on a production server or any active server because there
is no easy way to ensure a synchronous read for each query. If data is changing on either
server while pt-upgrade is running, the report could contain more false-positives than
legitimate differences. pt-upgrade assumes that both MySQL servers are static, unchanging
(except for any changes made by the tool if ran with "--no-read-only"). A read-only
workload shouldn't affect the tool, except maybe query times, so read-only slaves could be
used.
COMPARED TO
In a host to host comparison, results from the first host establish the norm to which
results from the second host are compared. In a reference results to host comparison, the
reference results are the norm to which the host is compared. Comparative phrases like
"smaller than", "better than", etc. mean compared to the norm.
For example, if the query time for an event is 0.01 on the first host and 0.5 on the
second host, that is a significant difference because 0.5 is worse than 0.1, and so the
query will be reported.
READ-ONLY
By default, pt-upgrade only executes "SELECT" and "SET" statements. (This does not
include 'SELECT...INTO' statements, which do not return rows but dump output to a file or
variable.) If you're using recreatable test or development servers and wish to compare
write statements too (e.g. "INSERT", "UPDATE", "DELETE"), then specify "--no-read-only".
If using a binary log, you must specify "--no-read-only" because binary logs don't contain
"SELECT" statements. See "--[no]read-only".
TRANSACTIONS
The tool does not create its own transactions, but any transactions in the "LOG" are
executed as-is. Since logs are serial, transactions shouldn't normally be an issue. If,
however, you need to compare queries that are somehow transactionally related (in which
case you probably also need to disable "--[no]read-only"), then pt-upgrade probably won't
do what you need because it's not designed for this purpose.
pt-upgrade runs with "autocommit=1" by default.
THROTTLING
pt-upgrade has no throttling options because the tool should only be ran on dedicated
testing or development servers. Do not run pt-upgrade on production servers!
Consequently, the tool is CPU, memory, disk, and network intensive. It executes queries
as fast as possible.
QUERY DIFFERENCES
Significant query differences are determined by comparing these aspects of each query from
both hosts:
Row count
The number of rows returned by the query should be the same. This is reported as
"missing rows" under "Row diffs".
Row data
The row data returned by the query should be the same. All differences are
significant: whitespace, float-precision, etc.
Warnings
The query should either not produce any errors or warnings, or produce the same errors
or warnings.
Query time
A query rarely executes with a constant time, but its execution time should be within
the same order of magnitude or smaller.
Query errors
If a query causes a SQL error on only one host, this is reported as "Query errors".
Since the query works on one host, its syntax is probably valid, and the error is due
to some condition unique to the other host.
SQL errors
If a query causes a SQL error on both hosts, this is reported as "SQL errors". The
SQL syntax of the query could be invalid.
REPORT
As pt-upgrade runs, it prints queries with differences as soon as it can (see "WHEN
QUERIES ARE REPORTED"). To prevent the report from becoming too long, queries are not
reported individually but grouped by fingerprint into classes. A query fingerprint is the
abstracted form of a query, created by removing literal values, normalizing whitespace,
etc. So these queries belong to the same class:
SELECT c FROM t WHERE id = 1
SELECT c FROM t WHERE id=5
select c from t where id = 9
The fingerprint for those queries is:
select c from t where id=?
Each query class can have up to "--max-class-size" unique queries (1,000 by default). Up
to "--max-examples" are reported for each type of difference, per query class. By virtue
of being in the same class, an example of one query's difference is usually representative
of all queries with the same difference, so it's not necessary to report every example.
The total number of queries in a class with a particular difference is indicated in the
report.
EXAMPLE
#-----------------------------------------------------------------------
# Logs
#-----------------------------------------------------------------------
File: /opt/mysql/slow.log
Size: 59700
#-----------------------------------------------------------------------
# Hosts
#-----------------------------------------------------------------------
host1:
DSN: h=127.1,P=12345
hostname: dev1
MySQL: MySQL 5.1.68
host2:
DSN: h=127.1,P=12348
hostname: dev2
MySQL: MySQL 5.5.10
########################################################################
# Query class AAD020567F8398EE
########################################################################
Reporting class because it has diffs, but hasn't been reported yet.
Total queries 1
Unique queries 1
Discarded queries 0
insert into t (id, username) values(?+)
##
## Warning diffs: 1
##
-- 1.
Code: 1265
Level: Warning
Message: Data truncated for column 'username' at row 1
vs.
No warning 1265
INSERT INTO t (id, username) VALUES (NULL, 'long_username')
#-----------------------------------------------------------------------
# Stats
#-----------------------------------------------------------------------
failed_queries 0
not_select 0
queries_filtered 0
queries_no_diffs 0
queries_read 1
queries_with_diffs 1
queries_with_errors 0
The "Query class <ID>" sections are the most important because they list "QUERY
DIFFERENCES". The first part of the section lists the reason why the query class was
report, followed by counts of queries in the class, followed by the fingerprint which
defines the class.
The rest of the query class section lists the "QUERY DIFFERENCES" that caused the class to
be reported. Each type of difference begins with a double hash mark header that lists the
type and total number of queries in the class with the difference. Then up to
"--max-examples" are listed, numbered "-- 1.", "--- 2.", etc. Each example lists the
difference for the first and second hosts (respective to the "Hosts" section), followed by
the first SQL statement that revealed the difference.
WHEN QUERIES ARE REPORTED
A query class is reported as soon as any one of the "QUERY DIFFERENCES" or query errors
has "--max-examples". Else, all queries with differences are reported when the tool
finishes.
For example, if two query time differences are found for a query class, it is not reported
yet. Once a third query time diffence is found, the query class is reported, including
any other differences that may have been found too. Queries for the class will continue
to be executed, but the class will not be reported again.
OUTPUT
The "REPORT" is printed to STDOUT as the tool runs. Internal warnings, errors, and
"--progress" are printed to STDERR. To keep the two separate, run the tool like:
pt-upgrade ... 1>report 2>err &
Then "tail -f err" while the tool is running to track its "--progress".
EXIT STATUS
In general, the tool exits zero if it finishes normally and there were no internal
warnings or errors, and no "QUERY DIFFERENCES" were found. Else the tool exits non-zero
with one or more of the following codes:
• 1
There were too many internal errors or warnings; see STDERR. See also
"--[no]continue-on-error".
• 4
There were "QUERY DIFFERENCES"; see the "REPORT".
• 8
"--run-time" expired; the tool did not finish reading the logs or reference results.
Other exit codes indicate that the tool crashed or died unexpectedly. The error that
caused this should have printed to STDERR.
To check for a particular exit code, logical "AND" ("&") the final exit status with the
exit code. For example, exit status 5 implies codes 1 and 4 because "5 & 1" is true, and
"5 & 4" is true.
OPTIONS
This tool accepts additional command-line arguments. Refer to the "SYNOPSIS" and usage
information for details.
--ask-pass
Prompt for a password when connecting to MySQL.
--charset
short form: -A; type: string
Default character set. If the value is utf8, sets Perl's binmode on STDOUT to utf8,
passes the mysql_enable_utf8 option to DBD::mysql, and runs SET NAMES UTF8 after
connecting to MySQL. Any other value sets binmode on STDOUT without the utf8 layer,
and runs SET NAMES after connecting to MySQL.
--config
type: Array
Read this comma-separated list of config files; if specified, this must be the first
option on the command line.
--[no]continue-on-error
default: yes
Continue parsing even if there is an error. The tool will not continue forever: it
stops after 100 errors, in which case there is probably a bug in the tool or the input
is invalid.
--[no]create-upgrade-table
default: yes
Create the "--upgrade-table" database and table.
--daemonize
Fork to the background and detach from the shell. POSIX operating systems only.
--database
short form: -D; type: string
Default database when connecting to MySQL.
--defaults-file
short form: -F; type: string
Only read MySQL options from the given file. You must give an absolute pathname.
--[no]disable-query-cache
default: yes
"SET SESSION query_cache_type = OFF" to disable the query cache.
--dry-run
Run but do not execute or compare queries. This is useful for checking command line
options, connections to MySQL, and log or reference results parsing.
--filter
type: string
Allow events for which this Perl code returns true.
See the same option in the documentation for pt-query-digest.
--help
Show help and exit.
--host
short form: -h; type: string
MySQL hostname or IP.
--ignore-warnings
type: Hash
Ignore these MySQL warning codes when comparing warnings.
--log
type: string
Print STDOUT and STDERR to this file when daemonized. This option only takes affect
when "--daemonize" is specified. The file is created if it doesn't exist, else output
is appended to it.
--max-class-size
type: int; default: 1000
Max number of unique queries in each query class. See "REPORT".
--max-examples
type: int; default: 3
Max number of examples to list for each "QUERY DIFFERENCES". A query class is
reported as soon as this many examples for any type of query difference are found.
--password
short form: -p; type: string
MySQL password for the "--user".
--pid
type: string
Create the given PID file. The tool won't start if the PID file already exists and
the PID it contains is different than the current PID. However, if the PID file
exists and the PID it contains is no longer running, the tool will overwrite the PID
file with the current PID. The PID file is removed automatically when the tool exits.
--port
short form: -P; type: int
MySQL port number.
--progress
type: array; default: time,30
Print progress reports to STDERR. The tool prints progress reports while reading logs
or reference results, roughly estimating how long until it finishes.
The value is a comma-separated list with two parts. The first part can be percentage,
time, or iterations; the second part specifies how often an update should be printed,
in percentage, seconds, or number of iterations.
--[no]read-only
default: yes
Execute only "SELECT" and "SET" statements. If "--no-read-only" is specified, all
queries are exeucted: "DROP", "DELETE", "UPDATE", etc. Even when running in default
read-only mode, you should use a MySQL user with only "SELECT" privileges to insure
against bugs in the tool.
--report
type: Hash; default: hosts, logs, queries, stats
Print these sections of the "REPORT".
--run-time
type: time
How long to run before exiting. By default, the tool runs until it finishes reading
the logs or reference results.
--save-results
type: string
Save reference results to this directory. This option works only when one DSN is
specified, to generate reference results. When comparing a host to reference results,
specify its results directory instead of its DSN. See the second example in the
"SYNOPSIS".
Reference results can use a lot of disk space.
--set-vars
type: Array
Set the MySQL variables in this comma-separated list of "variable=value" pairs.
By default, the tool sets:
wait_timeout=10000
Variables specified on the command line override these defaults. For example,
specifying "--set-vars wait_timeout=500" overrides the defaultvalue of 10000.
The tool prints a warning and continues if a variable cannot be set.
--socket
short form: -S; type: string
Socket file to use for connection.
--type
type: string; default: slowlog
Type of log files. Valid types are:
VALUE LOG TYPE
======= ===========================================
slowlog MySQL slow log
genlog MySQL general log
binlog MySQL binary log (converted by mysqlbinlog)
tcpdump TCP dump file generated by tcpdump command
rawlog Custom log with one SQL statement per line
--upgrade-table
type: string; default: percona_schema.pt_upgrade
Use this table to clear warnings. To clear all warnings from previous queries, pt-
upgrade executes "SELECT * FROM --upgrade-table LIMIT 1" on each host before executing
each query.
The table must be database-qualified. The database and table are automatically
created unless "--no-create-upgrade-table" is specified (see
"--[no]create-upgrade-table"). If the table does not already exist, it is created
with this definition:
CREATE TABLE pt_upgrade (
id INT NOT NULL PRIMARY KEY
)
--user
short form: -u; type: string
MySQL user if not the current system user.
--version
Show version and exit.
--[no]version-check
default: yes
Check for the latest version of Percona Toolkit, MySQL, and other programs.
This is a standard "check for updates automatically" feature, with two additional
features. First, the tool checks its own version and also the versions of the
following software: operating system, Percona Monitoring and Management (PMM), MySQL,
Perl, MySQL driver for Perl (DBD::mysql), and Percona Toolkit. Second, it checks for
and warns about versions with known problems. For example, MySQL 5.5.25 had a critical
bug and was re-released as 5.5.25a.
A secure connection to Percona’s Version Check database server is done to perform
these checks. Each request is logged by the server, including software version numbers
and unique ID of the checked system. The ID is generated by the Percona Toolkit
installation script or when the Version Check database call is done for the first
time.
Any updates or known problems are printed to STDOUT before the tool's normal output.
This feature should never interfere with the normal operation of the tool.
For more information, visit <https://www.percona.com/version-check>.
--watch-server
type: string
Parse only events for this IP:port for "--type" tcpdump. All other IP addresses are
ignored. If not specified, pt-upgrade watches all servers by looking for any IP
address using port 3306 or "mysql". If you're watching a server with a non-standard
port, this won't work, so you must specify the IP address and port to watch.
If you want to watch a mix of servers, some running on standard port 3306 and some
running on non-standard ports, you need to create separate tcpdump outputs for the
non-standard port servers and then specify this option for each. At present pt-
upgrade cannot auto-detect servers on port 3306 and also be told to watch a server on
a non-standard port.
DSN OPTIONS
These DSN options are used to create a DSN. Each option is given like "option=value".
The options are case-sensitive, so P and p are not the same option. There cannot be
whitespace before or after the "=", and if the value contains whitespace it must be
quoted. DSN options are comma-separated. See the percona-toolkit manpage for full
details.
• A
dsn: charset; copy: yes
Default character set.
• D
dsn: database; copy: yes
Default database.
• F
dsn: mysql_read_default_file; copy: yes
Only read default options from the given file
• h
dsn: host; copy: yes
Connect to host.
• L
copy: yes
Explicitly enable LOAD DATA LOCAL INFILE.
For some reason, some vendors compile libmysql without the --enable-local-infile
option, which disables the statement. This can lead to weird situations, like the
server allowing LOCAL INFILE, but the client throwing exceptions if it's used.
However, as long as the server allows LOAD DATA, clients can easily re-enable it; See
<https://dev.mysql.com/doc/refman/5.0/en/load-data-local.html> and
<http://search.cpan.org/~capttofu/DBD-mysql/lib/DBD/mysql.pm>. This option does
exactly that.
Although we've not found a case where turning this option leads to errors or differing
behavior, to be on the safe side, this option is not on by default.
• p
dsn: password; copy: yes
Password to use when connecting. If password contains commas they must be escaped
with a backslash: "exam\,ple"
• P
dsn: port; copy: yes
Port number to use for connection.
• S
dsn: mysql_socket; copy: yes
Socket file to use for connection.
• u
dsn: user; copy: yes
User for login if not current user.
ENVIRONMENT
The environment variable "PTDEBUG" enables verbose debugging output to STDERR. To enable
debugging and capture all output to a file, run the tool like:
PTDEBUG=1 pt-upgrade ... > FILE 2>&1
Be careful: debugging output is voluminous and can generate several megabytes of output.
SYSTEM REQUIREMENTS
You need Perl, DBI, DBD::mysql, and some core packages that ought to be installed in any
reasonably new version of Perl.
BUGS
For a list of known bugs, see <http://www.percona.com/bugs/pt-upgrade>.
Please report bugs at <https://jira.percona.com/projects/PT>. Include the following
information in your bug report:
• Complete command-line used to run the tool
• Tool "--version"
• MySQL version of all servers involved
• Output from the tool including STDERR
• Input files (log/dump/config files, etc.)
If possible, include debugging output by running the tool with "PTDEBUG"; see
"ENVIRONMENT".
DOWNLOADING
Visit <http://www.percona.com/software/percona-toolkit/> to download the latest release of
Percona Toolkit. Or, get the latest release from the command line:
wget percona.com/get/percona-toolkit.tar.gz
wget percona.com/get/percona-toolkit.rpm
wget percona.com/get/percona-toolkit.deb
You can also get individual tools from the latest release:
wget percona.com/get/TOOL
Replace "TOOL" with the name of any tool.
AUTHORS
Daniel Nichter
ABOUT PERCONA TOOLKIT
This tool is part of Percona Toolkit, a collection of advanced command-line tools for
MySQL developed by Percona. Percona Toolkit was forked from two projects in June, 2011:
Maatkit and Aspersa. Those projects were created by Baron Schwartz and primarily
developed by him and Daniel Nichter. Visit <http://www.percona.com/software/> to learn
about other free, open-source software from Percona.
COPYRIGHT, LICENSE, AND WARRANTY
This program is copyright 2009-2018 Percona LLC and/or its affiliates. Feedback and
improvements are welcome.
THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation, version 2; OR
the Perl Artistic License. On UNIX and similar systems, you can issue `man perlgpl' or
`man perlartistic' to read these licenses.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA.
VERSION
pt-upgrade 3.2.1
POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 11245:
Non-ASCII character seen before =encoding in 'Percona’s'. Assuming UTF-8