NAME

       snek-lilypad-instal - Install Snek to LilyPad

SYNOPSIS

       snek-lilypad-install [OPTION]... [COMMAND]

DESCRIPTION

       snek-lilypad-install installs the Snek programming language on an ATmega328P LilyPad board
       using the Optiboot boot loader.

OPTIONS

       -hex <snek.hex>
              Specifies the hex file to load to the board. The default is the currently installed
              version of Snek.

       -port <port>
              Specifies the serial port to use. The default is /dev/ttyUSB0.

       -mcu <MCU name>
              Specifies  which  micro controller to expect to find on the board. Some boards have
              m328 while others have m328p. The default is m328p, but if you get an error message
              indicating a mismatch, you can try the other.

OPTIBOOT

       Snek  for the LilyPad requires Optiboot. If your board does not already have Optiboot, you
       can use the Arduino IDE to install Optiboot on your LilyPad. Follow  the  instructions  on
       the Optiboot web site: https://github.com/Optiboot/optiboot to learn how to do that.

AUTHOR

       Keith Packard

                                       snek-lilypad-install               SNEK-LILYPAD-INSTALL(1)