NAME

       usrpctl - USRP Hardware Driver Peripheral Configuration Tool

DESCRIPTION

       Report  detailed  information on UHD-supported Software Radio Peripherals attached by USB,
       network, or embedded configuration.  Allows update and configuration of attached devices.

       The UHD package is the universal hardware driver for Ettus Research products. The goal  is
       to  provide  a  host driver and API for current and future Ettus Research products.  Users
       will be able to use the UHD driver standalone or with 3rd party applications.

       Details include unit names, revision numbers, and available sensors on all  attached  USRP
       motherboards and daughterboards.

SYNOPSIS

       usrpctl [ID] COMMAND [OPTIONS]

ID

       ID  is  the  optional  device  argument.  It  is used to define a set of USRP devices that
       COMMAND should be applied to. If ID  is  omitted  COMMAND  is  applied  to  all  reachable
       devices.

       usrpctl   understands   the   device   args   argument   used  by  other  UHD  tools  like
       uhd_find_devices.

COMMAND

       Is the action the tool is to take. Every command can be either applied to a single  device
       or  a  group  of  devices.  Commands that run on a group of devices repeat the command for
       every device.

       - Single device commands:
           - config: Read/write configuration variables (e.g., IP address)
           - probe: reads extended information about the USRP - Multi device commands:
           - update: Update binaries (e.g., FPGA image)
           - reset: Reset the device or parts thereof (e.g., only reset MPM)
           - find: finds all available USRPs in this network

OPTIONS

       The options are not always mandatory. It depends on the given COMMAND.

find command

       The find command takes no further options. If ID is not given  it  scans  the  system  for
       available,  supported  devices  and prints a list of discovered devices.  The print out is
       compatible to uhd_find_devices.  ID can be used to narrow  down  the  list  of  discovered
       devices.

probe command

       Print a complete property tree:
              -tree

       The probe command can only be applied to a single device so make sure that
              ID   identifies   exactly  one  device.  Without  arguments  it  displays  detailed
              information about the device such  as  name,  serial,  revision  numbers,  firmware
              version sensor information on attached motherboard and daughterboards.

EXAMPLES

       usrpctl find
               find all supported devices

       usrpctl type=x300,product=X310find
               find all x310 devices

       usrpctl name=my_usrp find
               find a device named my_usrp

       usrpctl addr=192.168.10.2 find
               find a device with the given IP.

       usrpctl addr=192.168.10.2 probe
               display device information for USRP with the given ID

       usprctl name=my_usrp probe -tree
               display property tree of device with the name my_usrp

       SEE ALSO
              UHD documentation: http://files.ettus.com/manual/

COPYRIGHT

       Copyright (c) 2022 Ettus Research, A National Instruments Brand

       This program is free software: you can redistribute it and/or modify it under the terms of
       the GNU General Public License as  published  by  the  Free  Software  Foundation,  either
       version 3 of the License, or (at your option) any later version.

       This  program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  PURPOSE.
       See the GNU General Public License for more details.