Provided by: vifm_0.12-1_amd64 
NAME
vifm - vi file manager
SYNOPSIS
vifm [OPTION]...
vifm [OPTION]... path
vifm [OPTION]... path path
DESCRIPTION
Vifm is an ncurses based file manager with vi like keybindings. If you use vi, vifm gives
you complete keyboard control over your files without having to learn a new set of
commands.
OPTIONS
vifm starts in the current directory unless it is given a different directory on the
command line or 'vifminfo' option includes "savedirs" (in which case last visited
directories are used as defaults).
- Read list of files from standard input stream and compose custom view out of them
(see "Custom views" section). Current working directory is used as a base for
relative paths.
<path> Starts Vifm in the specified path.
<path> <path>
Starts Vifm in the specified paths.
Specifying two directories triggers split view even when vifm was in single-view mode on
finishing previous run. To suppress this behaviour :only command can be put in the vifmrc
file.
When only one path argument is found on command-line, the left/top pane is automatically
set as the current view.
Paths to files are also allowed in case you want vifm to start with some archive opened.
--select <path>
Open parent directory of the given path and select specified file in it.
-f Makes vifm instead of opening files write selection to $VIFM/vimfiles and quit.
--choose-files <path>|-
Sets output file to write selection into on exit instead of opening files. "-"
means standard output. Use empty value to disable it.
--choose-dir <path>|-
Sets output file to write last visited directory into on exit. "-" means standard
output. Use empty value to disable it.
--delimiter <delimiter>
Sets separator for list of file paths written out by vifm. Empty value means null
character. Default is new line character.
--on-choose <command>
Sets command to be executed on selected files instead of opening them. The command
may use any of macros described in "Command macros" section below. The command is
executed once for whole selection.
--logging[=<startup log path>]
Log some operational details $VIFM/log. If the optional startup log path is
specified and permissions allow to open it for writing, then logging of early
initialization (before value of $VIFM is determined) is put there.
--server-list
List available server names and exit.
--server-name <name>
Name of target or this instance (sequential numbers are appended on name conflict).
--remote
Sends the rest of the command line to another instance of vifm, --server-name is
treated just like any other argument and should precede --remote on the command
line. When there is no server, quits silently. There is no limit on how many
arguments can be processed. One can combine --remote with -c <command> or
+<command> to execute commands in already running instance of vifm. See also
"Client-Server" section below.
--remote-expr
passes expression to vifm server and prints result. See also "Client-Server"
section below.
-c <command> or +<command>
Run command-line mode <command> on startup. Commands in such arguments are
executed in the order they appear in command line. Commands with spaces or special
symbols must be enclosed in double or single quotes or all special symbols should
be escaped (the exact syntax strongly depends on shell). "+" argument is
equivalent to "$" and thus picks last item of of the view.
--help, -h
Show a brief command summary and exit vifm.
--version, -v
Show version information and quit.
--no-configs
Skip reading vifmrc and vifminfo.
See "Startup" section below for the explanations on $VIFM.
General keys
Ctrl-C or Escape
cancel most operations (see "Cancellation" section below), clear all selected
files.
Ctrl-L clear and redraw the screen.
Basic Movement
The basic vi key bindings are used to move through the files and pop-up windows.
k, gk, or Ctrl-P
move cursor up one line.
j, gj or Ctrl-N
move cursor down one line.
h when 'lsview' is off move up one directory (moves to parent directory node in tree
view), otherwise move left one file.
l when 'lsview' is off move into a directory or launch a file, otherwise move right
one file. See "Selection" section below.
gg move to the first line of the file list.
G move to the last line in the file list.
gh go up one directory regardless of view representation (regular, ls-like). Also can
be used to leave custom views including tree view.
gl or Enter
enter directory or launch a file. See "Selection" section below.
H move to the first file in the window.
M move to the file in the middle of the window.
L move to the last file in the window.
Ctrl-F or Page Down
move forward one page.
Ctrl-B or Page Up
move back one page.
Ctrl-D jump back one half page.
Ctrl-U jump forward one half page.
n% move to the file that is n percent from the top of the list (for example 25%).
0 or ^ move cursor to the first column. See 'lsview' option description.
$ move cursor to the last column. See 'lsview' option description.
Space switch file lists.
gt switch to the next tab (wrapping around).
{n}gt switch to the tab number {n} (wrapping around).
gT switch to the previous tab (wrapping around).
{n}gT switch to {n}-th previous tab.
Movement with Count
Most movement commands also accept a count, 12j would move down 12 files.
[count]%
move to percent of the file list.
[count]j
move down [count] files.
[count]k
move up [count] files.
[count]G or [count]gg
move to list position [count].
[count]h
go up [count] directories.
Scrolling panes
zt redraw pane with file in top of list.
zz redraw pane with file in center of list.
zb redraw pane with file in bottom of list.
Ctrl-E scroll pane one line down.
Ctrl-Y scroll pane one line up.
Pane manipulation
Second character can be entered with or without Control key.
Ctrl-W H
move the pane to the far left.
Ctrl-W J
move the pane to the very bottom.
Ctrl-W K
move the pane to the very top.
Ctrl-W L
move the pane to the far right.
Ctrl-W h
switch to the left pane.
Ctrl-W j
switch to the pane below.
Ctrl-W k
switch to the pane above.
Ctrl-W l
switch to the right pane.
Ctrl-W b
switch to bottom-right window.
Ctrl-W t
switch to top-left window.
Ctrl-W p
switch to previous window.
Ctrl-W w
switch to other pane.
Ctrl-W o
leave only one pane.
Ctrl-W s
split window horizontally.
Ctrl-W v
split window vertically.
Ctrl-W x
exchange panes.
Ctrl-W z
quit preview pane or view modes.
Ctrl-W -
decrease size of the view by count.
Ctrl-W +
increase size of the view by count.
Ctrl-W <
decrease size of the view by count.
Ctrl-W >
increase size of the view by count.
Ctrl-W |
set current view size to count.
Ctrl-W _
set current view size to count.
Ctrl-W =
make size of two views equal.
For Ctrl-W +, Ctrl-W -, Ctrl-W <, Ctrl-W >, Ctrl-W | and Ctrl-W _ commands count can be
given before and/or after Ctrl-W. The resulting count is a multiplication of those two.
So "2 Ctrl-W 2 -" decreases window size by 4 lines or columns.
Ctrl-W | and Ctrl-W _ maximise current view by default.
Marks
Marks are set the same way as they are in vi.
You can use these characters for marks [a-z][A-Z][0-9].
m[a-z][A-Z][0-9]
set a mark for the file at the current cursor position.
'[a-z][A-Z][0-9]
navigate to the file set for the mark.
There are also several special marks that can't be set manually:
- ' (single quote) - previously visited directory of the view, thus hitting '' allows
switching between two last locations
- < - the first file of the last visually selected block
- > - the last file of the last visually selected block
Searching
/regular expression pattern
search for files matching regular expression in forward direction and advance
cursor to next match.
/ perform forward search with top item of search pattern history.
?regular expression pattern
search for files matching regular expression in backward direction and advance
cursor to previous match.
? perform backward search with top item of search pattern history.
Trailing slash for directories is taken into account, so /\/ searches for directories and
symbolic links to directories. At the moment // works too, but this can change in the
future, so consider escaping the slash if not typing pattern by hand.
Matches are automatically selected if 'hlsearch' is set. Enabling 'incsearch' makes
search interactive. 'ignorecase' and 'smartcase' options affect case sensitivity of
search queries as well as local filter and other things detailed in the description of
'caseoptions'.
[count]n
go to the next file matching last search pattern. Takes last search direction into
account.
[count]N
go to the previous file matching last search pattern. Takes last search direction
into account.
If 'hlsearch' option is set, hitting n/N to perform search and go to the first matching
item resets current selection in normal mode. It is not the case if search was already
performed on files in the directory, thus selection is not reset after clearing selection
with escape key and hitting n/N key again.
Note: vifm uses extended regular expressions for / and ?.
[count]f[character]
search forward for file with [character] as first character in name. Search wraps
around the end of the list.
[count]F[character]
search backward for file with [character] as first character in name. Search wraps
around the end of the list.
[count];
find the next match of f or F.
[count],
find the previous match of f or F.
Note: f, F, ; and , wrap around list beginning and end when they are used alone and they
don't wrap when they are used as selectors.
File Filters
There are three basic file filters:
- dot files filter (does not affect "." and ".." special directories, whose appearance
is controlled by the 'dotdirs' option), see 'dotfiles' option;
- permanent filter;
- local filter (see description of the "=" normal mode command).
Permanent filter essentially allows defining a group of files names which are not
desirable to be seen by default, like temporary or backup files, which might be created
alongside normal ones. Just like you don't usually need to see hidden dot files (files
starting with a dot). Local filter on the other hand is for temporary immediate filtering
of file list at hand, to get rid of uninterested files in the view or to make it possible
to use % range in a :command.
For the purposes of more deterministic editing permanent filter is split into two parts:
- one edited explicitly via :filter command;
- another one which is edited implicitly via zf shortcut.
Files are tested against both parts and a match counts if at least one of the parts
matched.
Each file list has its own copy of each filter.
Filtered files are not checked in / search or :commands.
Files and directories are filtered separately. This is done by appending a slash to a
directory name before testing whether it matches the filter. Examples:
" filter directories which names end with '.files'
:filter /^.*\.files\/$/
" filter files which names end with '.d'
:filter {*.d}
" filter files and directories which names end with '.o'
:filter /^.*\.o\/?$/
Note: vifm uses extended regular expressions.
The basic vim folding key bindings are used for managing filters.
za toggle visibility of dot files.
zo show dot files.
zm hide dot files.
zf add selected files to permanent filter.
zO reset permanent filter.
zR save and reset all filters.
zr clear local filter.
zM restore all filters (undoes last zR).
zd exclude selection or current file from a custom view. Does nothing for regular
view. For tree view excluding directory excludes that sub-tree. For compare views
zd hides group of adjacent identical files, count can be specified as 1 to exclude
just single file or selected items instead. Files excluded this way are not
counted as filtered out and can't be returned unless view is reloaded.
=regular expression pattern
filter out files that don't match regular expression. Whether view is updated as
regular expression is changed depends on the value of the 'incsearch' option. This
kind of filter is automatically reset when directory is changed.
Tree-related Keys
While some of the keys make sense outside of tree-view, they are most useful in trees.
[z go to first sibling of current entry.
]z go to last sibling of current entry.
zj go to next directory sibling of current entry or do nothing.
zk go to previous directory sibling of current entry or do nothing.
zx toggle fold under the cursor or parent entry of the current file if cursor is not
on a directory.
Other Normal Mode Keys
[count]:
enter command line mode. [count] generates range.
q: open external editor to prompt for command-line command. See "Command line
editing" section for details.
q/ open external editor to prompt for search pattern to be searched in forward
direction. See "Command line editing" section for details.
q? open external editor to prompt for search pattern to be searched in backward
direction. See "Command line editing" section for details.
q= open external editor to prompt for filter pattern. See "Command line editing"
section for details. Unlike other q{x} commands this one doesn't work in Visual
mode.
[count]!! and [count]!<selector>
enter command line mode with entered ! command. [count] modifies range.
Ctrl-O go backwards through directory history of current view. Nonexistent directories
are automatically skipped.
Ctrl-I if 'cpoptions' contains "t" flag, <tab> and <c-i> switch active pane just like
<space> does, otherwise it goes forward through directory history of current view.
Nonexistent directories are automatically skipped.
Ctrl-G show a dialog with detailed information about current file. See "Menus and
dialogs" section for controls.
Shift-Tab
enter view mode (works only after activating view pane with :view command).
ga calculate directory size. Uses cached directory sizes when possible for better
performance. As a special case calculating size of ".." entry results in
calculation of size of current directory.
gA like ga, but force update. Ignores old values of directory sizes.
If file under cursor is selected, each selected item is processed, otherwise only current
file is updated.
gf find link destination (like l with 'followlinks' off, but also finds directories).
On Windows additionally follows .lnk-files.
gF Same as gf, but resolves final path of the chain of symbolic links.
gr only for MS-Windows
same as l key, but tries to run program with administrative privileges.
av go to visual mode into selection amending state preserving current selection.
gv go to visual mode restoring last selection.
[reg]gs
when no register is specified, restore last t selection (similar to what gv does
for visual mode selection). If register is present, then all files listed in that
register and which are visible in current view are selected.
gu<selector>
make names of selected files lowercase.
[count]guu and [count]gugu
make names of [count] files starting from the current one lowercase. Without
[count] only current file is affected.
gU<selector>
make names of selected files uppercase.
[count]gUU and [count]gUgU
make names of [count] files starting from the current one uppercase. Without
[count] only current file is affected.
e explore file in the current pane.
i handle file (even if it's an executable and 'runexec' option is set).
cw change word is used to rename a file or files. If multiple files are selected,
behaves as :rename command run without arguments.
cW change WORD is used to change only name of file (without extension).
cl change link target.
co only for *nix
change file owner.
cg only for *nix
change file group.
[count]cp
change file attributes (permission on *nix and properties on Windows). If [count]
is specified, it's treated as numerical argument for non-recursive `chmod` command
(of the form [0-7]{3,4}). See "Menus and dialogs" section for controls.
[count]C
clone file [count] times.
[count]dd or d[count]selector
move selected file or files to trash directory (if 'trash' option is set, otherwise
delete). See "Trash directory" section below.
[count]DD or D[count]selector
like dd and d<selector>, but omitting trash directory (even when 'trash' option is
set).
Y, [count]yy or y[count]selector
yank selected files.
p copy yanked files to the current directory or move the files to the current
directory if they were deleted with dd or :d[elete] or if the files were yanked
from trash directory. See "Trash directory" section below.
P move the last yanked files. The advantage of using P instead of d followed by p is
that P moves files only once. This isn't important in case you're moving files in
the same file system where your home directory is, but using P to move files on
some other file system (or file systems, in case you want to move files from fs1 to
fs2 and your home is on fs3) can save your time.
al put symbolic links with absolute paths.
rl put symbolic links with relative paths.
t select or unselect (tag) the current file.
u undo last change.
Ctrl-R redo last change.
dp in compare view of "ofboth grouppaths" kind, makes corresponding entry of the other
pane equal to the current one. The semantics is as follows:
- nothing done for identical entries
- if file is missing in current view, its pair gets removed
- if file is missing or differs in other view, it's replaced
- file pairs are defined by matching relative paths
File removal obeys 'trash' option. When the option is enabled, the operation can
be undone/redone (although results won't be visible automatically).
Unlike in Vim, this operation is performed on a single line rather than a set of
adjacent changes.
do same as dp, but applies changes in the opposite direction.
v or V enter visual mode, clears current selection.
[count]Ctrl-A
increment first number in file name by [count] (1 by default).
[count]Ctrl-X
decrement first number in file name by [count] (1 by default).
ZQ same as :quit!.
ZZ same as :quit.
. repeat last command-line command (not normal mode command) of this run (does
nothing right after startup or :restart command). The command doesn't depend on
command-line history and can be used with completely disabled history.
( go to previous group. Groups are defined by primary sorting key. For name and
iname members of each group have same first letter, for all other sorting keys vifm
uses size, uid, ...
) go to next group. See ( key description above.
{ speeds up navigation to closest previous entry of the opposite type by moving to
the first file backwards when cursor is on a directory and to the first directory
backwards when cursor is on a file. This is essentially a special case of ( that
is locked on "dirs".
} same as {, but in forward direction.
[c go to previous mismatched entry in directory comparison view or do nothing.
]c go to next mismatched entry in directory comparison view or do nothing.
[d go to previous directory entry or do nothing.
]d go to next directory entry or do nothing.
[r same as :siblprev.
]r same as :siblnext.
[R same as :siblprev!.
]R same as :siblnext!.
[s go to previous selected entry or do nothing.
]s go to next selected entry or do nothing.
Using Count
You can use count with commands like yy.
[count]yy
yank count files starting from current cursor position downward.
Or you can use count with motions passed to y, d or D.
d[count]j
delete (count + 1) files starting from current cursor position upward.
Registers
vifm supports multiple registers for temporary storing list of yanked or deleted files.
Registers should be specified by hitting double quote key followed by a register name.
Count is specified after register name. By default commands use unnamed register, which
has double quote as its name.
Though all commands accept registers, most of commands ignores them (for example H or
Ctrl-U). Other commands can fill register or append new files to it.
Presently vifm supports ", _, a-z and A-Z characters as register names.
As mentioned above " is unnamed register and has special meaning of the default register.
Every time when you use named registers (a-z and A-Z) unnamed register is updated to
contain same list of files as the last used register.
_ is black hole register. It can be used for writing, but its list is always empty.
Registers with names from a to z and from A to Z are named ones. Lowercase registers are
cleared before adding new files, while uppercase aren't and should be used to append new
files to the existing file list of appropriate lowercase register (A for a, B for b, ...).
Registers can be changed on :empty command if they contain files under trash directory
(see "Trash directory" section below).
Registers do not contain one file more than once.
Example:
"a2yy
puts names of two files to register a (and to the unnamed register),
"Ad
removes one file and append its name to register a (and to the unnamed register),
p or "ap or "Ap
inserts previously yanked and deleted files into current directory.
Selectors
y, d, D, !, gu and gU commands accept selectors. You can combine them with any of
selectors below to quickly remove or yank several files.
Most of selectors are like vi motions: j, k, gg, G, H, L, M, %, f, F, ;, comma, ', ^, 0
and $. But there are some additional ones.
a all files in current view.
s selected files.
S all files except selected.
Examples:
- dj - delete file under cursor and one below;
- d2j - delete file under cursor and two below;
- y6gg - yank all files from cursor position to 6th file in the list.
When you pass a count to whole command and its selector they are multiplied. So:
- 2d2j - delete file under cursor and four below;
- 2dj - delete file under cursor and two below;
- 2y6gg - yank all files from cursor position to 12th file in the list.
Visual Mode
Visual mode has two generic operating submodes:
- plain selection as it is in Vim;
- selection editing submode.
Both modes select files in range from cursor position at which visual mode was entered to
current cursor position (let's call it "selection region"). Each of two borders can be
adjusted by swapping them via "o" or "O" keys and updating cursor position with regular
cursor motion keys. Obviously, once initial cursor position is altered this way, real
start position becomes unavailable.
Plain Vim-like visual mode starts with cleared selection, which is not restored on
rejecting selection ("Escape", "Ctrl-C", "v", "V"). Contrary to it, selection editing
doesn't clear previously selected files and restores them after reject. Accepting
selection by performing an operation on selected items (e.g. yanking them via "y") moves
cursor to the top of current selection region (not to the top most selected file of the
view).
In turn, selection editing supports three types of editing (look at statusbar to know
which one is currently active):
- append - amend selection by selecting elements in selection region;
- remove - amend selection by deselecting elements in selection region;
- invert - amend selection by inverting selection of elements in selection region.
No matter how you activate selection editing it starts in "append". One can switch type
of operation (in the order given above) via "Ctrl-G" key.
Almost all normal mode keys work in visual mode, but instead of accepting selectors they
operate on selected items.
Enter save selection and go back to normal mode not moving cursor.
av leave visual mode if in amending mode (restores previous selection), otherwise
switch to amending selection mode.
gv restore previous visual selection.
v, V, Ctrl-C or Escape
leave visual mode if not in amending mode, otherwise switch to normal visual
selection.
Ctrl-G switch type of amending by round robin scheme: append -> remove -> invert.
: enter command line mode. Selection is cleared on leaving the mode.
o switch active selection bound.
O switch active selection bound.
gu, u make names of selected files lowercase.
gU, U make names of selected files uppercase.
cw same as running :rename command without arguments.
View Mode
This mode tries to imitate the less program. List of builtin shortcuts can be found
below. Shortcuts can be customized using :qmap, :qnoremap and :qunmap command-line
commands.
Shift-Tab, Tab, q, Q, ZZ
return to normal mode.
[count]e, [count]Ctrl-E, [count]j, [count]Ctrl-N, [count]Enter
scroll forward one line (or [count] lines).
[count]y, [count]Ctrl-Y, [count]k, [count]Ctrl-K, [count]Ctrl-P
scroll backward one line (or [count] lines).
[count]f, [count]Ctrl-F, [count]Ctrl-V, [count]Space
scroll forward one window (or [count] lines).
[count]b, [count]Ctrl-B, [count]Alt-V
scroll backward one window (or [count] lines).
[count]z
scroll forward one window (and set window to [count]).
[count]w
scroll backward one window (and set window to [count]).
[count]Alt-Space
scroll forward one window, but don't stop at end-of-file.
[count]d, [count]Ctrl-D
scroll forward one half-window (and set half-window to [count]).
[count]u, [count]Ctrl-U
scroll backward one half-window (and set half-window to [count]).
r, Ctrl-R, Ctrl-L
repaint screen.
R reload view preserving scroll position.
F toggle automatic forwarding. Roughly equivalent to periodic file reload and
scrolling to the bottom. The behaviour is similar to `tail -F` or F key in less.
a switch to the next viewer. Does nothing for preview constructed via %q macro.
A switch to the previous viewer. Does nothing for preview constructed via %q macro.
i toggle raw mode (ignoring of defined viewers). Does nothing for preview
constructed via %q macro.
[count]/pattern
search forward for ([count]‐th) matching line.
[count]?pattern
search backward for ([count]‐th) matching line.
[count]n
repeat previous search (for [count]‐th occurrence).
[count]N
repeat previous search in reverse direction (for [count]‐th occurrence).
[count]g, [count]<, [count]Alt-<
scroll to the first line of the file (or line [count]).
[count]G, [count]>, [count]Alt->
scroll to the last line of the file (or line [count]).
[count]p, [count]%
scroll to the beginning of the file (or N percent into file).
v invoke an editor to edit the current file being viewed. The command for editing is
taken from the 'vicmd' or 'vixcmd' option value and extended with middle line
number prepended by a plus sign and name of the current file.
All "Ctrl-W x" keys work the same was as in Normal mode. Active mode is automatically
changed on navigating among windows. When less-like mode activated on file preview is
left using one by "Ctrl-W x" keys, its state is stored until another file is displayed
using preview (it's possible to leave the mode, hide preview pane, do something else, then
get back to the file and show preview pane again with previously stored state in it).
Command line Mode
These keys are available in all submodes of the command line mode: command, search, prompt
and filtering.
Down, Up, Left, Right, Home, End and Delete are extended keys and they are not available
if vifm is compiled with --disable-extended-keys option.
Esc, Ctrl-C
leave command line mode, cancels input. Cancelled input is saved into appropriate
history and can be recalled later.
Ctrl-M, Enter
execute command and leave command line mode.
Ctrl-I, Tab
complete command or its argument.
Shift-Tab
complete in reverse order.
Ctrl-_ stop completion and return original input.
Ctrl-B, Left
move cursor to the left.
Ctrl-F, Right
move cursor to the right.
Ctrl-A, Home
go to line beginning.
Ctrl-E, End
go to line end.
Alt-B go to the beginning of previous word.
Alt-F go to the end of next word.
Ctrl-U remove characters from cursor position till the beginning of line.
Ctrl-K remove characters from cursor position till the end of line.
Ctrl-H, Backspace
remove character before the cursor.
Ctrl-D, Delete
remove character under the cursor.
Ctrl-W remove characters from cursor position till the beginning of previous word.
Alt-D remove characters from cursor position till the beginning of next word.
Ctrl-T swap the order of current and previous character and move cursor forward or, if
cursor past the end of line, swap the order of two last characters in the line.
Alt-. insert last part of previous command to current cursor position. Each next call
will insert last part of older command.
Ctrl-G edit command-line content in external editor. See "Command line editing" section
for details.
Ctrl-N recall more recent command-line from history.
Ctrl-P recall older command-line from history.
Up recall more recent command-line from history, that begins as the current command-
line.
Down recall older command-line from history, that begins as the current command-line.
Ctrl-] trigger abbreviation expansion.
Pasting special values
The shortcuts listed below insert specified values into current cursor position. Last key
of every shortcut references value that it inserts:
- c - [c]urrent file
- d - [d]irectory path
- e - [e]xtension of a file name
- r - [r]oot part of a file name
- t - [t]ail part of directory path
- a - [a]utomatic filter
- m - [m]anual filter
- = - local filter, which is bound to "=" in normal mode
Values related to filelist in current pane are available through Ctrl-X prefix, while
values from the other pane have doubled Ctrl-X key as their prefix (doubled Ctrl-X is
presumably easier to type than uppercase letters; it's still easy to remap the keys to
correspond to names of similar macros).
Ctrl-X c
name of the current file of the active pane.
Ctrl-X d
path to the current directory of the active pane.
Ctrl-X e
extension of the current file of the active pane.
Ctrl-X r
name root of current file of the active pane.
Ctrl-X t
the last component of path to the current directory of the active pane.
Ctrl-X Ctrl-X c
name of the current file of the inactive pane.
Ctrl-X Ctrl-X d
path to the current directory of the inactive pane.
Ctrl-X Ctrl-X e
extension of the current file of the inactive pane.
Ctrl-X Ctrl-X r
name root of current file of the inactive pane.
Ctrl-X Ctrl-X t
the last component of path to the current directory of the inactive pane.
Ctrl-X a
value of implicit permanent filter (old name "automatic") of the active pane.
Ctrl-X m
value of explicit permanent filter (old name "manual") of the active pane.
Ctrl-X =
value of local filter of the active pane.
Ctrl-X /
last pattern from search history.
Command line editing
vifm provides a facility to edit several kinds of data, that is usually edited in command-
line mode, in external editor (using command specified by 'vicmd' or 'vixcmd' option).
This has at least two advantages over built-in command-line mode:
- one can use full power of Vim to edit text;
- finding and reusing history entries becomes possible.
The facility is supported by four input submodes of the command-line:
- command;
- forward search;
- backward search;
- file rename (see description of cw and cW normal mode keys).
Editing command-line using external editor is activated by the Ctrl-G shortcut. It's also
possible to do almost the same from Normal and Visual modes using q:, q/ and q? commands.
Temporary file created for the purpose of editing the line has the following structure:
1. First line, which is either empty or contains text already entered in command-line.
2. 2nd and all other lines with history items starting with the most recent one.
Altering this lines in any way won't change history items stored by vifm.
After editing application is finished the first line of the file is taken as the result of
operation, when the application returns zero exit code. If the application returns an
error (see :cquit command in Vim), all the edits made to the file are ignored, but the
initial value of the first line is saved in appropriate history.
More Mode
This is the mode that appears when status bar content is so big that it doesn't fit on the
screen. One can identify the mode by "-- More --" message at the bottom.
The following keys are handled in this mode:
Enter, Ctrl-J, j or Down
scroll one line down.
Backspace, k or Up
scroll one line up.
d scroll one page (half of a screen) down.
u scroll one page (half of a screen) up.
Space, f or PageDown
scroll down a screen.
b or PageUp
scroll up a screen.
G scroll to the bottom.
g scroll to the top.
q, Escape or Ctrl-C
quit the mode.
: switch to command-line mode.
Commands
Commands are executed with :command_name<Enter>
Commented out lines should start with the double quote symbol ("), which may be preceded
by whitespace characters intermixed with colons. Inline comments can be added at the end
of the line after double quote symbol, only last line of a multi-line command can contain
such comment. Not all commands support inline comments as their syntax conflicts with
names of registers and fields where double quotes are allowed.
Most of the commands have two forms: complete and the short one. Example:
:noh[lsearch]
This means the complete command is nohlsearch, and the short one is noh.
Most of command-line commands completely reset selection in the current view. However,
there are several exceptions:
- `:invert s` most likely leaves some files selected;
- :normal command (when it doesn't leave command-line mode);
- :if and :else commands don't affect selection on successful execution.
'|' can be used to separate commands, so you can give multiple commands in one line. If
you want to use '|' in an argument, precede it with '\'.
These commands see '|' as part of their arguments even when it's escaped:
:[range]!
:autocmd
:cabbrev
:cmap
:cnoreabbrev
:cnoremap
:command
:dmap
:dnoremap
:filetype
:fileviewer
:filextype
:map
:mmap
:mnoremap
:nmap
:nnoremap
:noremap
:normal
:qmap
:qnoremap
:vmap
:vnoremap
:wincmd
:windo
:winrun
To be able to use another command after one of these, wrap it with the :execute command.
An example:
if filetype('.') == 'reg' | execute '!!echo regular file' | endif
:[count]
:number
move to the file number.
:12 would move to the 12th file in the list.
:0 move to the top of the list.
:$ move to the bottom of the list.
:[count]command
The only builtin :[count]command are :[count]d[elete] and :[count]y[ank].
:d3 would delete three files starting at the current file position moving down.
:3d would delete one file at the third line in the list.
:command [args]
:[range]!program
execute command via shell. Accepts macros.
:[range]!command &
same as above, but the command is run in the background using vifm's means.
Programs that write to stderr create error dialogs showing errors of the command.
Note the space before ampersand symbol, if you omit it, command will be run in the
background using job control of your shell.
Accepts macros.
:!!
:[range]!!command
same as :!, but pauses before returning.
:!! repeat the last command.
:alink
:[range]alink[!?]
create absolute symbolic links to files in directory of inactive view. With "?"
prompts for destination file names in an editor. "!" forces overwrite.
:[range]alink[!] path
create absolute symbolic links to files in directory specified by the path
(absolute or relative to directory of inactive view).
:[range]alink[!] name1 name2...
create absolute symbolic links of files in directory of other view giving each next
link a corresponding name from the argument list.
:apropos
:apropos keyword...
create a menu of items returned by the apropos command. Selecting an item in the
menu opens corresponding man page. By default the command relies on the external
"apropos" utility, which can be customized by altering value of the 'aproposprg'
option. See "Menus and dialogs" section for controls.
:autocmd
:au[tocmd] {event} {pat} {cmd}
register autocommand for the {event}, which can be:
- DirEnter - triggered after directory is changed
Event name is case insensitive.
{pat} is a comma-separated list of modified globs patterns, which can contain tilde
or environment variables. All paths use slash ('/') as directory separator. The
pattern can start with a '!', which negates it. Patterns that do not contain
slashes are matched against the last item of the path only (e.g. "dir" in
"/path/dir"). Literal comma can be entered by doubling it. Two modifications to
globs matching are as follows:
- * - never matches a slash (i.e., can signify single directory level)
- ** - matches any character (i.e., can match path of arbitrary depth)
{cmd} is a :command or several of them separated with '|'.
Examples of patterns:
- conf.d - matches conf.d directory anywhere
- *.d - matches directories ending with ".d" anywhere
- **.git - matches something.git, but not .git anywhere
- **/.git/** - matches /path/.git/objects, but not /path/.git
- **/.git/**/ - matches /path/.git/ only (because of trailing slash)
- /etc/* - matches /etc/conf.d/, /etc/X11, but not /etc/X11/fs
- /etc/**/*.d - matches /etc/conf.d, /etc/X11/conf.d, etc.
- /etc/**/* - matches /etc/ itself and any file below it
- /etc/**/** - matches /etc/ itself and any file below it
:au[tocmd] [{event}] [{pat}]
list those autocommands that match given event-pattern combination.
{event} and {pat} can be omitted to list all autocommands. To list any
autocommands for specific pattern one can use * placeholder in place of {event}.
:au[tocmd]! [{event}] [{pat}]
remove autocommands that match given event-pattern combination. Syntax is the same
as for listing above.
:apropos
repeat last :apropos command.
:bmark
:bmark tag1 [tag2 [tag3...]]
bookmark current directory with specified tags.
:bmark! path tag1 [tag2 [tag3...]]
same as :bmark, but allows bookmarking specific path instead of current directory.
This is for use in vifmrc and for bookmarking files.
Path can contain macros that expand to single path (%c, %C, %d, %D) or those that
can expand to multiple paths, but contain only one (%f, %F, %rx). The latter is
done for convenience on using the command interactively. Complex macros that
include spaces (e.g. "%c:gs/ /_") should be escaped.
:bmarks
:bmarks
display all bookmarks in a menu.
:bmarks [tag1 [tag2...]]
display menu of bookmarks that include all of the specified tags. See "Menus and
dialogs" section for controls.
:bmgo
:bmgo [tag1 [tag2...]]
when there are more than one match acts exactly like :bmarks, otherwise navigates
to single match immediately (and fails if there is no match).
:cabbrev
:ca[bbrev]
display menu of command-line mode abbreviations. See "Menus and dialogs" section
for controls.
:ca[bbrev] lhs-prefix
display command-line mode abbreviations which left-hand side starts with specified
prefix.
:ca[bbrev] lhs rhs
register new or overwrites existing abbreviation for command-line mode. rhs can
contain spaces and any special sequences accepted in rhs of mappings (see
"Mappings" section below). Abbreviations are expanded non-recursively.
:cnoreabbrev
:cnorea[bbrev]
display menu of command-line mode abbreviations. See "Menus and dialogs" section
for controls.
:cnorea[bbrev] lhs-prefix
display command-line mode abbreviations which left-hand side starts with specified
prefix.
:cnorea[bbrev] lhs rhs
same as :cabbrev, but mappings in rhs are ignored during expansion.
:cd
:cd or :cd ~ or :cd $HOME
change to home directory.
:cd - go to the last visited directory.
:cd ~/dir
change directory to ~/dir.
:cd /curr/dir /other/dir
change directory of the current pane to /curr/dir and directory of the other pane
to /other/dir. Relative paths are assumed to be relative to directory of current
view. Command won't fail if one of directories is invalid. All forms of the
command accept macros.
:cd! /dir
same as :cd /dir /dir.
:cds
:cds[!] pattern string
navigate to path obtained by substituting first match in current path. Arguments
can include slashes, but starting first argument with a separator will activate
below form of the command. Specifying "!" changes directory of both panes.
Available flags:
- i - ignore case (the 'ignorecase' and 'smartcase' options are not used)
- I - don't ignore case (the 'ignorecase' and 'smartcase' options are not used)
:cds[!]/pattern/string/[flags]
same as above, but with :substitute-like syntax. Other punctuation characters can
be used as separators.
:change
:c[hange]
show a dialog to alter properties of files.
:chmod
:[range]chmod
display file attributes (permission on *nix and properties on Windows) change
dialog.
:[range]chmod[!] arg...
only for *nix
change permissions for files. See `man 1 chmod` for arg format. "!" means set
permissions recursively.
:chown
:[range]chown
only for *nix
same as co key in normal mode.
:[range]chown [user][:][group]
only for *nix
change owner and/or group of files. Operates on directories recursively.
:clone
:[range]clone[!?]
clones files in current directory. With "?" vifm will open vi to edit file names.
"!" forces overwrite. Macros are expanded.
:[range]clone[!] path
clones files to directory specified with the path (absolute or relative to current
directory). "!" forces overwrite. Macros are expanded.
:[range]clone[!] name1 name2...
clones files in current directory giving each next clone a corresponding name from
the argument list. "!" forces overwrite. Macros are expanded.
:colorscheme
:colo[rscheme]?
print current color scheme name on the status bar.
:colo[rscheme]
display a menu with a list of available color schemes. You can choose primary
color scheme here. It is used for view if no directory specific colorscheme fits
current path. It's also used to set border color (except view titles) and colors
in menus and dialogs. See "Menus and dialogs" section for controls.
:colo[rscheme] color_scheme_name
change primary color scheme to color_scheme_name. In case of errors (e.g. some
colors are not supported by terminal) either nothing is changed or color scheme is
reset to builtin colors to ensure that TUI is left in a usable state.
:colo[rscheme] color_scheme_name directory
associate directory with the color scheme. The directory argument can be either
absolute or relative path when :colorscheme command is executed from command line,
but mandatory should be an absolute path when the command is executed in scripts
loaded at startup (until vifm is completely loaded).
:colo[rscheme] color_scheme_name color_scheme_name...
loads the first color scheme in the order given that exists and is supported by the
terminal. If none matches, current one remains unchanged. For example:
" use a separate color scheme for panes which are inside FUSE mounts
execute 'colorscheme in-fuse' &fusehome
:comclear
:comc[lear]
remove all user defined commands.
:command
:com[mand]
display a menu of user commands. See "Menus and dialogs" section for controls.
:com[mand] prefix
display user defined commands that start with the prefix.
:com[mand] name action[ &]
set or redefine a user command.
Use :com[mand]! to overwrite a previously set command of the same name. Builtin
commands can't be redefined.
User commands must start with an upper or lower case letter. Command name can't
contain special symbols except for a single trailing '?' or '!'. Numbers are
allowed provided that they don't cause parsing ambiguity (no command name prefix
that precedes a digit can match an existing command unless it has a digit in the
same place), for example:
" good
:command mp3 command
" good
:command mp4 command
:command mp3! command
:command mp4? command
" bad
:command mp command
:command mp44 command
" good
:command mp4c command
User commands are run in a shell by default (see below for syntax of other
options). To run a command in the background you must mark it as a background
command by adding " &" after the command's action (e.g., `:com rm rm %f &`).
User commands of all kinds have macros expanded in them. See "Command macros"
section for more information.
:com[mand] name /pattern
set search pattern.
:com[mand] name =pattern
set local filter value.
:com[mand] name filter{:filter args}
set file name filter (see :filter command description). For example:
" display only audio files
:command onlyaudio filter/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i
" display everything except audio files
:command noaudio filter!/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i
:com[mand] name :commands
set kind of an alias for internal commands (like in a shell). Passes range given
to alias to an aliased command, so running :%cp after
:command cp :copy %a
equals
:%copy
:compare
:compare [byname | bysize | bycontents | listall | listunique | listdups | ofboth | ofone
| groupids | grouppaths | skipempty]...
compare files in one or two views according to the arguments. The default is
"bycontents listall ofboth grouppaths". See "Compare views" section below for
details. Diff structure is incompatible with alternative representations, so
values of 'lsview' and 'millerview' options are ignored.
:copen
:cope[n]
opens menu with contents of the last displayed menu with navigation to files by
default, if any.
:copy
:[range]co[py][!?][ &]
copy files to directory of other view. With "?" prompts for destination file names
in an editor. "!" forces overwrite.
:[range]co[py][!] path[ &]
copy files to directory specified with the path (absolute or relative to directory
of other view). "!" forces overwrite.
:[range]co[py][!] name1 name2...[ &]
copy files to directory of other view giving each next file a corresponding name
from the argument list. "!" forces overwrite.
:cquit
:cq[uit][!]
same as :quit, but also aborts directory choosing via --choose-dir (empties output
file) and returns non-zero exit code.
:cunabbrev
:cuna[bbrev] lhs
unregister command-line mode abbreviation by its lhs.
:cuna[bbrev] rhs
unregister command-line mode abbreviation by its rhs, so that abbreviation could be
removed even after expansion.
:delbmarks
:delbmarks
remove bookmarks from current directory.
:delbmarks tag1 [tag2 [tag3...]]
remove set of bookmarks that include all of the specified tags.
:delbmarks!
remove all bookmarks.
:delbmarks! path1 [path2 [path3...]]
remove bookmarks of listed paths.
:delcommand
:delc[ommand] user_command
remove user defined command named user_command.
:delete
:[range]d[elete][!][ &]
delete selected file or files. "!" means complete removal (omitting trash).
:[range]d[elete][!] [reg] [count][ &]
delete selected or [count] files to the reg register. "!" means complete removal
(omitting trash).
:delmarks
:delm[arks]!
delete all marks.
:delm[arks] marks ...
delete specified marks, each argument is treated as a set of marks.
:delsession
:delsession
delete specified session if it was stored previously. Deleting current session
doesn't detach it.
:display
:di[splay]
display menu with registers content.
:di[splay] list ...
display the contents of the numbered and named registers that are mentioned in list
(for example "az to display "", "a and "z content).
:dirs
:dirs display directory stack in a menu. See "Menus and dialogs" section for controls.
:echo
:ec[ho] [<expr>...]
evaluate each argument as an expression and output them separated with a space.
See help on :let command for a definition of <expr>.
:edit
:[range]e[dit] [file...]
open selected or passed file(s) in editor. Macros and environment variables are
expanded.
:else
:el[se]
execute commands until next matching :endif if all other conditions didn't match.
See also help on :if and :endif commands.
:elseif
:elsei[f] {expr1}
execute commands until next matching :elseif, :else or :endif if conditions of
previous :if and :elseif branches were evaluated to zero. See also help on :if and
:endif commands.
:empty
:empty permanently remove files from all existing non-empty trash directories (see "Trash
directory" section below). Trash directories which are specified via %r and/or %u
also get deleted completely. Also remove all operations from undolist that have no
sense after :empty and remove all records about files located inside directories
from all registers. Removal is performed as background task with undetermined
amount of work and can be checked via :jobs menu.
:endif
:en[dif]
end conditional block. See also help on :if and :else commands.
:execute
:exe[cute] [<expr>...]
evaluate each argument as an expression and join results separated by a space to
get a single string which is then executed as a command-line command. See help on
:let command for a definition of <expr>.
:exit
:exi[t][!]
same as :quit.
:file
:f[ile][ &]
display menu of programs set for the file type of the current file. " &" forces
running associated program in background. See "Menus and dialogs" section for
controls.
:f[ile] arg[ &]
run associated command that begins with the arg skipping opening menu. " &" forces
running associated program in background.
:filetype
:filet[ype] pattern-list [{descr}]def_prog[ &],[{descr}]prog2[ &],...
associate given program list to each of the patterns. Associated program (command)
is used by handlers of l and Enter keys (and also in the :file menu). If you need
to insert comma into command just double it (",,"). Space followed by an ampersand
as two last characters of a command means running of the command in the background.
Optional description can be given to each command to ease understanding of what
command will do in the :file menu. Vifm will try the rest of the programs for an
association when the default isn't found. When program entry doesn't contain any
of vifm macros, name of current file is appended as if program entry ended with %c
macro on *nix and %"c on Windows. On Windows path to executables containing spaces
can (and should be for correct work with such paths) be double quoted. See
"Patterns" section below for pattern definition and "Selection" section for how
selection is handled. See also "Automatic FUSE mounts" section below. Example for
zip archives and several actions:
filetype *.zip,*.jar,*.war,*.ear
\ {Mount with fuse-zip}
\ FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR,
\ {View contents}
\ zip -sf %c | less,
\ {Extract here}
\ tar -xf %c,
Note that on OS X when `open` is used to call an app, vifm is unable to check
whether that app is actually available. So if automatic skipping of programs that
aren't there is desirable, `open` should be replaced with an actual command.
:filet[ype] filename
list (in menu mode) currently registered patterns that match specified file name.
Same as ":filextype filename".
:filextype
:filex[type] pattern-list [{ description }] def_program,program2,...
same as :filetype, but this command is ignored if not running in X. In X
:filextype is equal to :filetype. See "Patterns" section below for pattern
definition and "Selection" section for how selection is handled. See also
"Automatic FUSE mounts" section below.
For example, consider the following settings (the order might seem strange, but
it's for the demonstration purpose):
filetype *.html,*.htm
\ {View in lynx}
\ lynx
filextype *.html,*.htm
\ {Open with dwb}
\ dwb %f %i &,
filetype *.html,*.htm
\ {View in links}
\ links
filextype *.html,*.htm
\ {Open with firefox}
\ firefox %f &,
\ {Open with uzbl}
\ uzbl-browser %f %i &,
If you're using vifm inside a terminal emulator that is running in graphical
environment (when X is used on *nix; always on Windows), vifm attempts to run
application in this order:
1. lynx
2. dwb
3. links
4. firefox
5. uzbl
If there is no graphical environment (checked by presence of non-empty $DISPLAY or
$WAYLAND_DISPLAY environment variable on *nix; never happens on Windows), the list
will look like:
1. lynx
2. links
Just as if all :filextype commands were not there.
The purpose of such differentiation is to allow comfortable use of vifm with same
settings in desktop environment/through remote connection (SSH)/in native console.
Note that on OS X $DISPLAY isn't defined unless you define it, so :filextype should
be used only if you set $DISPLAY in some way.
:filext[ype] filename
list (in menu mode) currently registered patterns that match specified file name.
Same as ":filetype filename".
:fileviewer
:filev[iewer] pattern-list command1,command2,...
register specified list of commands as viewers for each of the patterns. Viewer is
a command which output is captured and displayed in one of the panes of vifm after
pressing "e" or running :view command. When the command doesn't contain any of
vifm macros, name of current file is appended as if command ended with %c macro.
Comma escaping and missing commands processing rules as for :filetype apply to this
command. See "Patterns" section below for pattern definition. Supports Lua
handlers.
Example for zip archives:
fileviewer *.zip,*.jar,*.war,*.ear zip -sf %c, echo "No zip to preview:"
:filev[iewer] filename
list (in menu mode) currently registered patterns that match specified filename.
:filter
:filter[!] {pattern}
filter files matching the pattern out of directory listings. '!' controls state of
filter inversion after updating filter value (see also 'cpoptions' description).
Filter is matched case sensitively on *nix and case insensitively on Windows. See
"File Filters" and "Patterns" sections.
Example:
" filter all files ending in .o from the filelist.
:filter /.o$/
:filter[!] {empty-pattern}
same as above, but use last search pattern as pattern value.
Example:
:filter //I
:filter
reset filter (set it to an empty string) and show all files.
:filter!
same as :invert.
:filter?
show information on local, name and auto filters.
:find
:[range]fin[d] pattern
display results of find command in the menu. Searches among selected files if any.
Accepts macros. By default the command relies on the external "find" utility,
which can be customized by altering value of the 'findprg' option.
:[range]fin[d] -opt...
same as :find above, but user defines all find arguments. Searches among selected
files if any.
:[range]fin[d] path -opt...
same as :find above, but user defines all find arguments. Ignores selection and
range.
:[range]fin[d]
repeat last :find command.
:finish
:fini[sh]
stop sourcing a script. Can only be used in a vifm script file. This is a quick way
to skip the rest of the file.
:goto
:go[to]
change directory if necessary and put specified path under the cursor. The path
should be existing non-root path. Macros and environment variables are expanded.
:grep
:[range]gr[ep][!] pattern
will show results of grep command in the menu. Add "!" to request inversion of
search (look for lines that do not match pattern). Searches among selected files
if any and no range given. Ignores binary files by default. By default the
command relies on the external "grep" utility, which can be customized by altering
value of the 'grepprg' option.
:[range]gr[ep][!] -opt...
same as :grep above, but user defines all grep arguments, which are not escaped.
Searches among selected files if any.
:[range]gr[ep][!]
repeat last :grep command. "!" of this command inverts "!" in repeated command.
:help
:h[elp]
show the help file.
:h[elp] argument
is the same as using ':h argument' in vim. Use vifm-<something> to get help on
vifm (tab completion works). This form of the command doesn't work when 'vimhelp'
option is off.
:hideui
:hideui
hide interface to show previous commands' output.
:highlight
:hi[ghlight]
display information about all highlight groups active at the moment.
:hi[ghlight] clear
reset all highlighting to builtin defaults and removed all filename-specific rules.
:hi[ghlight] clear ( {pat1,pat2,...} | /regexp/ )
remove specified rule.
:hi[ghlight] ( group-name | {pat1,pat2,...} | /regexp/ )
display information on given highlight group or file name pattern of color scheme
used in the active view.
:hi[ghlight] ( group-name | {pat1,pat2,...} | /regexp/[iI] ) cterm=style | ctermfg=color |
ctermbg=color | gui=style | guifg=color | guibg=color
set style (cterm, gui), foreground (ctermfg, guifg) and/or background (ctermbg,
guibg) parameters of highlight group or file name pattern for color scheme used in
the active view.
All style values as well as color names are case insensitive.
Available style values (some of them can be combined):
- bold
- underline
- reverse or inverse
- standout
- italic (on unsupported systems becomes reverse)
- combine - add attributes of current group to attributes of the parent in group
hierarchy (see below) instead of replacing them
- none
Available group-name values:
- Win - color of all windows (views, dialogs, menus) and default color for their content
(e.g. regular files in views)
- AuxWin - color of auxiliary areas of windows
- OtherWin - color of inactive pane
- Border - color of vertical parts of the border
- TabLine - tab line color (for 'tabscope' set to "global")
- TabLineSel - color of the tip of selected tab (regardless of 'tabscope')
- TopLine - top line color of the other pane
- TopLineSel - top line color of the current pane
- CmdLine - the command line/status bar color
- ErrorMsg - color of error messages in the status bar
- StatusLine - color of the line above the status bar
- JobLine - color of job line that appears above the status line
- WildMenu - color of the wild menu items
- SuggestBox - color of key suggestion box
- CurrLine - line at cursor position in active view
- OtherLine - line at cursor position in inactive view
- OddLine - color of every second entry line in a pane
- LineNr - line number column of views
- Selected - color of selected files
- Directory - color of directories
- Link - color of symbolic links in the views
- BrokenLink - color of broken symbolic links
- HardLink - color of regular files with more than one hard link
- Socket - color of sockets
- Device - color of block and character devices
- Executable - color of executable files
- Fifo - color of fifo pipes
- CmpMismatch - color of mismatched files in side-by-side comparison by path
- User1..User9 - 9 colors which can be used via %* 'statusline' macro
Available colors:
- -1 or default or none - default or transparent
- black and lightblack
- red and lightred
- green and lightgreen
- yellow and lightyellow
- blue and lightblue
- magenta and lightmagenta
- cyan and lightcyan
- white and lightwhite
- 0-255 - corresponding colors from 256-color palette (for ctermfg and ctermbg)
- #rrggbb - direct ("gui", "true", 24-bit) color in hex-notation, each of the three
compontents are in the range 0x00 to 0xff (for guifg and guibg)
Light versions of colors are regular colors with bold attribute set automatically in
terminals that have less than 16 colors. So order of arguments of :highlight command is
important and it's better to put "cterm" in front of others to prevent it from overwriting
attributes set by "ctermfg" or "ctermbg" arguments.
For convenience of color scheme authors xterm-like names for 256 color palette is also
supported. The mapping is taken from
http://vim.wikia.com/wiki/Xterm256_color_names_for_console_Vim
Duplicated entries were altered by adding an underscore followed by numerical suffix.
0 Black 86 Aquamarine1 172 Orange3
1 Red 87 DarkSlateGray2 173 LightSalmon3_2
2 Green 88 DarkRed_2 174 LightPink3
3 Yellow 89 DeepPink4_2 175 Pink3
4 Blue 90 DarkMagenta 176 Plum3
5 Magenta 91 DarkMagenta_2 177 Violet
6 Cyan 92 DarkViolet 178 Gold3_2
7 White 93 Purple 179 LightGoldenrod3
8 LightBlack 94 Orange4_2 180 Tan
9 LightRed 95 LightPink4 181 MistyRose3
10 LightGreen 96 Plum4 182 Thistle3
11 LightYellow 97 MediumPurple3 183 Plum2
12 LightBlue 98 MediumPurple3_2 184 Yellow3_2
13 LightMagenta 99 SlateBlue1 185 Khaki3
14 LightCyan 100 Yellow4 186 LightGoldenrod2
15 LightWhite 101 Wheat4 187 LightYellow3
16 Grey0 102 Grey53 188 Grey84
17 NavyBlue 103 LightSlateGrey 189 LightSteelBlue1
18 DarkBlue 104 MediumPurple 190 Yellow2
19 Blue3 105 LightSlateBlue 191 DarkOliveGreen1
20 Blue3_2 106 Yellow4_2 192 DarkOliveGreen1_2
21 Blue1 107 DarkOliveGreen3 193 DarkSeaGreen1_2
22 DarkGreen 108 DarkSeaGreen 194 Honeydew2
23 DeepSkyBlue4 109 LightSkyBlue3 195 LightCyan1
24 DeepSkyBlue4_2 110 LightSkyBlue3_2 196 Red1
25 DeepSkyBlue4_3 111 SkyBlue2 197 DeepPink2
26 DodgerBlue3 112 Chartreuse2_2 198 DeepPink1
27 DodgerBlue2 113 DarkOliveGreen3_2 199 DeepPink1_2
28 Green4 114 PaleGreen3_2 200 Magenta2_2
29 SpringGreen4 115 DarkSeaGreen3 201 Magenta1
30 Turquoise4 116 DarkSlateGray3 202 OrangeRed1
31 DeepSkyBlue3 117 SkyBlue1 203 IndianRed1
32 DeepSkyBlue3_2 118 Chartreuse1 204 IndianRed1_2
33 DodgerBlue1 119 LightGreen_2 205 HotPink
34 Green3 120 LightGreen_3 206 HotPink_2
35 SpringGreen3 121 PaleGreen1 207 MediumOrchid1_2
36 DarkCyan 122 Aquamarine1_2 208 DarkOrange
37 LightSeaGreen 123 DarkSlateGray1 209 Salmon1
38 DeepSkyBlue2 124 Red3 210 LightCoral
39 DeepSkyBlue1 125 DeepPink4_3 211 PaleVioletRed1
40 Green3_2 126 MediumVioletRed 212 Orchid2
41 SpringGreen3_2 127 Magenta3 213 Orchid1
42 SpringGreen2 128 DarkViolet_2 214 Orange1
43 Cyan3 129 Purple_2 215 SandyBrown
44 DarkTurquoise 130 DarkOrange3 216 LightSalmon1
45 Turquoise2 131 IndianRed 217 LightPink1
46 Green1 132 HotPink3 218 Pink1
47 SpringGreen2_2 133 MediumOrchid3 219 Plum1
48 SpringGreen1 134 MediumOrchid 220 Gold1
49 MediumSpringGreen 135 MediumPurple2 221 LightGoldenrod2_2
50 Cyan2 136 DarkGoldenrod 222 LightGoldenrod2_3
51 Cyan1 137 LightSalmon3 223 NavajoWhite1
52 DarkRed 138 RosyBrown 224 MistyRose1
53 DeepPink4 139 Grey63 225 Thistle1
54 Purple4 140 MediumPurple2_2 226 Yellow1
55 Purple4_2 141 MediumPurple1 227 LightGoldenrod1
56 Purple3 142 Gold3 228 Khaki1
57 BlueViolet 143 DarkKhaki 229 Wheat1
58 Orange4 144 NavajoWhite3 230 Cornsilk1
59 Grey37 145 Grey69 231 Grey100
60 MediumPurple4 146 LightSteelBlue3 232 Grey3
61 SlateBlue3 147 LightSteelBlue 233 Grey7
62 SlateBlue3_2 148 Yellow3 234 Grey11
63 RoyalBlue1 149 DarkOliveGreen3_3 235 Grey15
64 Chartreuse4 150 DarkSeaGreen3_2 236 Grey19
65 DarkSeaGreen4 151 DarkSeaGreen2 237 Grey23
66 PaleTurquoise4 152 LightCyan3 238 Grey27
67 SteelBlue 153 LightSkyBlue1 239 Grey30
68 SteelBlue3 154 GreenYellow 240 Grey35
69 CornflowerBlue 155 DarkOliveGreen2 241 Grey39
70 Chartreuse3 156 PaleGreen1_2 242 Grey42
71 DarkSeaGreen4_2 157 DarkSeaGreen2_2 243 Grey46
72 CadetBlue 158 DarkSeaGreen1 244 Grey50
73 CadetBlue_2 159 PaleTurquoise1 245 Grey54
74 SkyBlue3 160 Red3_2 246 Grey58
75 SteelBlue1 161 DeepPink3 247 Grey62
76 Chartreuse3_2 162 DeepPink3_2 248 Grey66
77 PaleGreen3 163 Magenta3_2 249 Grey70
78 SeaGreen3 164 Magenta3_3 250 Grey74
79 Aquamarine3 165 Magenta2 251 Grey78
80 MediumTurquoise 166 DarkOrange3_2 252 Grey82
81 SteelBlue1_2 167 IndianRed_2 253 Grey85
82 Chartreuse2 168 HotPink3_2 254 Grey89
83 SeaGreen2 169 HotPink2 255 Grey93
84 SeaGreen1 170 Orchid
85 SeaGreen1_2 171 MediumOrchid1
There are two colors (foreground and background) and only one bold attribute. Thus single
bold attribute affects both colors when "reverse" attribute is used in vifm run inside
terminal emulator. At the same time linux native console can handle boldness of
foreground and background colors independently, but for consistency with terminal
emulators this is available only implicitly by using light versions of colors. This
behaviour might be changed in the future.
Although vifm supports 256 colors in a sense they are supported by UI drawing library,
whether you will be able to use all of them highly depends on your terminal. To set up
terminal properly, make sure that $TERM in the environment you run vifm is set to name of
256-color terminal (on *nixes it can also be set via X resources), e.g. xterm-256color.
One can find list of available terminal names by listing /usr/lib/terminfo/. Number of
colors supported by terminal with current settings can be checked via "tput colors"
command.
In order to use 24-bit colors one needs a terminal that supports them, corresponding
terminfo record (probably ends in "-direct" like in "xterm-direct") and $TERM pointing to
it. When vifm detects direct color support "cterm*" values are ignored for groups which
have at least one of "gui*" values set, otherwise they are used after translating via a
builtin palette.
Here is the hierarchy of highlight groups, which you need to know for using transparency:
JobLine
SuggestBox
StatusLine
WildMenu
User1..User9
Border
CmdLine
ErrorMsg
Win
OtherWin
AuxWin
OddLine
File name specific highlights
Directory
Link
BrokenLink
HardLink
Socket
Device
Fifo
Executable
Selected
CurrLine
LineNr (in active pane)
OtherLine
LineNr (in inactive pane)
TopLine
TopLineSel
TabLineSel (for pane tabs)
User1..User9
TabLine
TabLineSel
User1..User9
"none" means default terminal color for highlight groups at the first level of the
hierarchy and transparency for all others.
Here file name specific highlights mean those configured via globs ({}) or regular
expressions (//). At most one of them is applied per file entry, namely the first that
matches file name, hence order of :highlight commands might be important in certain cases.
:history
:his[tory]
display a menu with list of visited directories. See "Menus and dialogs" section
for controls.
:his[tory] x
x can be:
d[ir] or . show directory history.
c[md] or : show command line history.
s[earch] or / show search history and search forward on l key.
f[search] or / show search history and search forward on l key.
b[search] or ? show search history and search backward on l key.
i[nput] or @ show prompt history (e.g. on one file renaming).
fi[lter] or = show filter history (see description of the "=" normal mode
command).
See "Menus and dialogs" section for controls.
:histnext
:histnext
same as <c-i>. The main use case for this command is to work around the common
pain point of <tab> and <c-i> being the same ASCII character: one could alter the
terminal emulator settings to emit, for example, the `F1` keycode when Ctrl-I is
pressed, then `:noremap <f1> :histnext<cr>` in vifm, add "t" flag to the
'cpoptions', and thus have both <c-i> and <tab> working as expected.
:histprev
:histprev
same as <c-o>.
:if
:if {expr1}
start conditional block. Commands are executed until next matching :elseif, :else
or :endif command if {expr1} evaluates to non-zero, otherwise they are ignored.
See also help on :else and :endif commands.
Example:
if $TERM == 'screen.linux'
highlight CurrLine ctermfg=lightwhite ctermbg=lightblack
elseif $TERM == 'tmux'
highlight CurrLine cterm=reverse ctermfg=black ctermbg=white
else
highlight CurrLine cterm=bold,reverse ctermfg=black ctermbg=white
endif
:invert
:invert [f]
invert file name filter.
:invert? [f]
show current filter state.
:invert s
invert selection.
:invert o
invert sorting order of the primary sorting key.
:invert? o
show sorting order of the primary sorting key.
:jobs
:jobs display menu of current backgrounded processes. See "Menus and dialogs" section
for controls.
:let
:let $ENV_VAR = <expr>
set an environment variable. Warning: setting environment variable to an empty
string on Windows removes it.
:let $ENV_VAR .= <expr>
append value to environment variable.
:let &[l:|g:]opt = <expr>
sets option value.
:let &[l:|g:]opt .= <expr>
append value to string option.
:let &[l:|g:]opt += <expr>
increasing option value, adding sub-values.
:let &[l:|g:]opt -= <expr>
decreasing option value, removing sub-values.
Where <expr> could be a single-quoted string, double-quoted string, an environment
variable, function call or a concatanation of any of them in any order using the '.'
operator. Any whitespace is ignored.
:locate
:locate filename
use "locate" command to create a menu of filenames. Selecting a file from the menu
will reload the current file list in vifm to show the selected file. By default
the command relies on the external "locate" utility (it's assumed that its database
is already built), which can be customized by altering value of the 'locateprg'
option. See "Menus and dialogs" section for controls.
:locate
repeat last :locate command.
:ls
:ls lists windows of active terminal multiplexer (only when terminal multiplexer is
used). This is achieved by issuing proper command for active terminal multiplexer,
thus the list is not handled by vifm.
:lstrash
:lstrash
display a menu with list of files in trash. Each element of the list is original
path of a deleted file, thus the list can contain duplicates. See "Menus and
dialogs" section for controls.
:mark
:[range]ma[rk][?] x [/full/path] [filename]
Set mark x (a-zA-Z0-9) at /full/path and filename. By default current directory is
being used. If no filename was given and /full/path is current directory then last
file in [range] is used. Using of macros is allowed. Question mark will stop
command from overwriting existing marks.
:marks
:marks create a pop-up menu of marks. See "Menus and dialogs" section for controls.
:marks list ...
display the contents of the marks that are mentioned in list.
:media
:media only for *nix
display media management menu. See "Menus and dialogs" section for controls. See
also 'mediaprg' option.
:messages
:mes[sages]
shows previously given messages (up to 50).
:mkdir
:[line]mkdir[!] dir ...
create directories at specified paths. The [line] can be used to pick node in a
tree-view. "!" means make parent directories as needed. Macros are expanded.
:move
:[range]m[ove][!?][ &]
move files to directory of other view. With "?" prompts for destination file names
in an editor. "!" forces overwrite.
:[range]m[ove][!] path[ &]
move files to directory specified with the path (absolute or relative to directory
of other view). "!" forces overwrite.
:[range]m[ove][!] name1 name2...[ &]
move files to directory of other view giving each next file a corresponding name
from the argument list. "!" forces overwrite.
:nohlsearch
:noh[lsearch]
clear selection in current pane.
:normal
:norm[al][!] commands
execute normal mode commands. If "!" is used, user defined mappings are ignored.
Unfinished last command is aborted as if <esc> or <c-c> was typed. A ":" should be
completed as well. Commands can't start with a space, so put a count of 1 (one)
before it.
:only
:on[ly]
switch to a one window view.
:plugin
:plugin load
loads all plugins. To be used in configuration file to manually load plugins at an
earlier point. The plugins can be loaded only once, additional calls will do
nothing.
:plugin blacklist {plugin}
adds {plugin} to the list of plugins to be ignored.
:plugin whitelist {plugin}
adds {plugin} to the list of plugins to be loaded while ignoring all other plugins.
This list should normally be empty.
:plugins
:plugins
open plugins menu. See "Menus and dialogs" section for controls.
:popd
:popd remove pane directories from stack.
:pushd
:pushd[!] /curr/dir [/other/dir]
add pane directories to stack and process arguments like :cd command.
:pushd exchange the top two items of the directory stack.
:put
:[line]pu[t][!] [reg] [ &]
put files from specified register (" by default) into current directory. The
[line] can be used to pick node in a tree-view. "!" moves files "!" moves files
from their original location instead of copying them. During this operation no
confirmation dialogs will be shown, all checks are performed beforehand.
:pwd
:pw[d] show the present working directory.
:qall
:qa[ll][!]
exit vifm (add ! to skip saving changes and checking for active backgrounded
commands).
:quit
:q[uit][!]
if there is more than one tab, close the current one, otherwise exit vifm (add ! to
skip saving state and checking for active backgrounded commands).
:redraw
:redr[aw]
redraw the screen immediately.
:registers
:reg[isters]
display menu with registers content.
:reg[isters] list ...
display the contents of the numbered and named registers that are mentioned in list
(for example "az to display "", "a and "z content).
:regular
:regular
switch to regular view leaving custom view.
:rename
:[range]rename[!]
rename files by editing their names in an editor. "!" renames files recursively in
subdirectories. See "External Renaming" section.
:[range]rename name1 name2...
rename each of selected files to a corresponding name.
:restart
:restart
free a lot of things (histories, commands, etc.), reread vifminfo, vifmrc and
session files and run startup commands passed in the argument list, thus losing all
unsaved changes (e.g. recent history or keys mapped after starting this instance).
Session that wasn't yet stored gets reset.
While many things get reset, some basic UI state and current locations are
preserved, including tabs.
:restart full
variation of :restart that makes no attempt to preserve anything.
:restore
:[range]restore
restore file from trash directory, doesn't work outside one of trash directories.
See "Trash directory" section below.
:rlink
:[range]rlink[!?]
create relative symbolic links to files in directory of other view. With "?"
prompts for destination file names in an editor. "!" forces overwrite.
:[range]rlink[!] path
create relative symbolic links of files in directory specified with the path
(absolute or relative to directory of other view). "!" forces overwrite.
:[range]rlink[!] name1 name2...
create relative symbolic links of files in directory of other view giving each next
link a corresponding name from the argument list. "!" forces overwrite.
:screen
:screen
toggle whether to use the terminal multiplexer or not.
A terminal multiplexer uses pseudo terminals to allow multiple windows to be used
in the console or in a single xterm. Starting vifm from terminal multiplexer with
appropriate support turned on will cause vifm to open a new terminal multiplexer
window for each new file edited or program launched from vifm.
This requires screen version 3.9.9 or newer for the screen -X argument or tmux (1.8
version or newer is recommended).
:screen!
enable integration with terminal multiplexers.
:screen?
display whether integration with terminal multiplexers is enabled.
Note: the command is called screen for historical reasons (when tmux wasn't yet supported)
and might be changed in future releases, or get an alias.
:select
:[range]select
select files in the given range (current file if no range is given).
:select {pattern}
select files that match specified pattern. Possible {pattern} forms are described
in "Patterns" section below. Trailing slash for directories is taken into account,
so `:select! */ | invert s` selects only files.
:select //[iI]
same as item above, but reuses last search pattern.
:select !{external command}
select files from the list supplied by external command. Files are matched by full
paths, relative paths are converted to absolute ones beforehand.
:[range]select! [{pattern}]
same as above, but resets previously selected items before proceeding.
:session
:session?
print name of the current session.
:session
detach current session without saving it. Resets v:session.
:session name
create or load and switch to a session with the specified name. Name can't contain
slashes. Session active at the moment is saved before the switch. Session is also
automatically saved when quiting the application in usual ways. Sets v:session.
:set
:se[t] display all options that differ from their default value.
:se[t] all
display all options.
:se[t] opt1=val1 opt2='val2' opt3="val3" ...
sets given options. For local options both values are set.
You can use following syntax:
- for all options - option, option? and option&
- for boolean options - nooption, invoption and option!
- for integer options - option=x, option+=x and option-=x
- for string options - option=x and option+=x
- for string list options - option=x, option+=x, option-=x and option^=x
- for enumeration options - option=x, option+=x and option-=x
- for set options - option=x, option+=x, option-=x and option^=x
- for charset options - option=x, option+=x, option-=x and option^=x
the meaning:
- option - turn option on (for boolean) or print its value (for all others)
- nooption - turn option off
- invoption - invert option state
- option! - invert option state
- option? - print option value
- option& - reset option to its default value
- option=x or option:x - set option to x
- option+=x - add/append x to option
- option-=x - remove (or subtract) x from option
- option^=x - toggle x presence among values of the option
Option name can be prepended and appended by any number of whitespace characters.
:setglobal
:setg[lobal]
display all global options that differ from their default value.
:setg[lobal] all
display all global options.
:setg[lobal] opt1=val1 opt2='val2' opt3="val3" ...
same as :set, but changes/prints only global options or global values of local
options. Changes to the latter might be not visible until directory is changed.
:setlocal
:setl[ocal]
display all local options that differ from their default value.
:setl[ocal] all
display all local options.
:setl[ocal] opt1=val1 opt2='val2' opt3="val3" ...
same as :set, but changes/prints only local values of local options.
:shell
:sh[ell][!]
start a shell in current directory. "!" suppresses spawning dedicated window of
terminal multiplexer for a shell. To make vifm adaptive to environment it uses
$SHELL if it's defined, otherwise 'shell' value is used.
:siblnext
:[count]siblnext[!]
change directory to [count]th next sibling directory after current path using value
of global sort option of current pane. "!" enables wrapping.
For example, say, you're at /boot and root listing starts like this:
bin/
boot/
dev/
...
Issuing :siblnext will navigate to /dev.
:siblprev
:[count]siblprev[!]
same as :siblnext, but in the opposite direction.
:sort
:sor[t]
display dialog with different sorting methods, where one can select the primary
sorting key. When 'viewcolumns' options is empty and 'lsview' is off, changing
primary sorting key will also affect view look (in particular the second column of
the view will be changed). See "Menus and dialogs" section for controls.
:source
:so[urce] file
read command-line commands from the file.
:split
:sp[lit]
switch to a two window horizontal view.
:sp[lit]!
toggle horizontal window splitting.
:sp[lit] path
splits the window horizontally to show both file directories. Also changes other
pane to path (absolute or relative to current directory of active pane).
:stop
:st[op]
suspend vifm (same as pressing Ctrl-Z). Does nothing if this instance isn't
running in a shell. The command exists to allow mapping to the action of Ctrl-Z.
:substitute
:[range]s[ubstitute]/pattern/string/[flags]
for each file in range replace a match of pattern with string.
String can contain \0...\9 to link to capture groups (\0 - all match, \1 - first group,
etc.).
Pattern is stored in search history.
Available flags:
- i - ignore case (the 'ignorecase' and 'smartcase' options are not used)
- I - don't ignore case (the 'ignorecase' and 'smartcase' options are not used)
- g - substitute all matches in each file name (each g toggles this)
:[range]s[ubstitute]/pattern
substitute pattern with an empty string.
:[range]s[ubstitute]//string/[flags]
use last pattern from search history.
:[range]s[ubstitute]
repeat previous substitution command.
:sync
:sync [relative path]
change the other pane to the current pane directory or to some path relative to the
current directory. Using macros is allowed.
:sync! change the other pane to the current pane directory and synchronize cursor
position. If current pane displays custom list of files, position before entering
it is used (current one might not make any sense).
:sync! [location | cursorpos | localopts | filters | filelist | tree | all]...
change enumerated properties of the other pane to match corresponding properties of
the current pane. Arguments have the following meanings:
- location - current directory of the pane;
- cursorpos - cursor position (doesn't make sense without "location");
- localopts - all local options;
- filters - all filters;
- filelist - list of files for custom view (implies "location");
- tree - tree structure for tree view (implies "location");
- all - all of the above.
:tabclose
:tabc[lose]
close current tab, unless it's the only one open at current scope.
:tabmove
:tabm[ove] [N]
without the argument or with `$` as the argument, current tab becomes the last tab.
With the argument, current tab is moved after the tab with the specified number.
Argument of `0` moves current tab to the first position.
:tabname
:tabname [name]
set, update or reset (when no argument is provided) name of the current tab.
:tabnew
:tabnew [path]
create new tab. Accepts optional path for the new tab. Macros and environment
variables are expanded.
:tabnext
:tabn[ext]
switch to the next tab (wrapping around).
:tabn[ext] {n}
go to the tab number {n}. Tab numeration starts with 1.
:tabonly
:tabo[nly]
close all tabs but the current one. Closes pane tabs only at the active side.
:tabprevious
:tabp[revious]
switch to the previous tab (wrapping around).
:tabp[revious] {n}
go to the {n}-th previous tab. Note that :tabnext handles its argument
differently.
:touch
:[line]touch file...
create files at specified paths. Aborts on errors. Doesn't update time of
existing files. The [line] can be used to pick node in a tree-view. Macros are
expanded.
:tr
:[range]tr/pattern/string/
for each file in range transliterate the characters which appear in pattern to the
corresponding character in string. When string is shorter than pattern, it's
padded with its last character.
:trashes
:trashes
lists all valid trash directories in a menu. Only non-empty and writable trash
directories are shown. This is exactly the list of directories that are cleared
when :empty command is executed.
:trashes?
same as :trashes, but also displays size of each trash directory.
:tree
:tree turn pane into tree view with current directory as its root. The tree view is
implemented on top of a custom view, but is automatically kept in sync with file
system state and considers all the filters. Thus the structure corresponds to what
one would see on visiting the directories manually. As a special case for trees
built out of custom view file-system tracking isn't performed.
To leave tree view go up from its root or use gh at any level of the tree. Any
command that changes directory will also do, in particular, `:cd ..`.
Tree structure is incompatible with alternative representations, so values of
'lsview' and 'millerview' options are ignored.
The "depth" argument specifies nesting level on which loading of subdirectories
won't happen (they will be folded). Values start at 1.
:tree! toggle current view in and out of tree mode.
:undolist
:undol[ist]
display list of latest changes. Use "!" to see actual commands. See "Menus and
dialogs" section for controls.
:unlet
:unl[et][!] $ENV_VAR1 $ENV_VAR2 ...
remove environment variables. Add ! to omit displaying of warnings about
nonexistent variables.
:unselect
:[range]unselect
unselect files in the given range (current file if no range is given).
:unselect {pattern}
unselect files that match specified pattern. Possible {pattern} forms are
described in "Patterns" section below. Trailing slash for directories is taken
into account, so `:unselect */` unselects directories.
:unselect !{external command}
unselect files from the list supplied by external command. Files are matched by
full paths, relative paths are converted to absolute ones beforehand.
:unselect //[iI]
same as item above, but reuses last search pattern.
:version
:ve[rsion]
show menu with version information.
:vifm
:vifm same as :version.
:view
:vie[w]
toggle on and off the quick file view (preview of file's contents). See also
'quickview' option.
:vie[w]!
turn on quick file view if it's off.
:volumes
:volumes
only for MS-Windows
display menu with volume list. Hitting l (or Enter) key opens appropriate volume
in the current pane. See "Menus and dialogs" section for controls.
:vsplit
:vs[plit]
switch to a two window vertical view.
:vs[plit]!
toggle window vertical splitting.
:vs[plit] path
split the window vertically to show both file directories. And changes other pane
to path (absolute or relative to current directory of active pane).
:wincmd
:[count]winc[md] {arg}
same as running Ctrl-W [count] {arg}.
:windo
:windo [command...]
execute command for each pane (same as :winrun % command).
:winrun
:winrun type [command...]
execute command for pane(s), which is determined by type argument:
- ^ - top-left pane
- $ - bottom-right pane
- % - all panes
- . - current pane
- , - other pane
:write
:w[rite]
write current state to vifminfo and session files (if a session is active).
:wq
:wq[!] same as :quit, but ! disables only the check of backgrounded commands, while state
of the application is always written.
:wqall
:wqa[ll][!]
same as :qall, but ! disables only the check of backgrounded commands, while state
of the application is always written.
:xall
:xa[ll][!]
same as :qall.
:xit
:x[it][!]
same as :quit.
:yank
:[range]y[ank] [reg] [count]
will yank files to the reg register.
:map lhs rhs
:map lhs rhs
map lhs key sequence to rhs in normal and visual modes.
:map! lhs rhs
map lhs key sequence to rhs in command line mode.
:cmap :dmap :mmap :nmap :qmap :vmap
:cm[ap] lhs rhs
map lhs to rhs in command line mode.
:dm[ap] lhs rhs
map lhs to rhs in dialog modes.
:mm[ap] lhs rhs
map lhs to rhs in menu mode.
:nm[ap] lhs rhs
map lhs to rhs in normal mode.
:qm[ap] lhs rhs
map lhs to rhs in view mode.
:vm[ap] lhs rhs
map lhs to rhs in visual mode.
:*map
:cm[ap]
list all maps in command line mode.
:dm[ap]
list all maps in dialog modes.
:mm[ap]
list all maps in menu mode.
:nm[ap]
list all maps in normal mode.
:qm[ap]
list all maps in view mode.
:vm[ap]
list all maps in visual mode.
:*map beginning
:cm[ap] beginning
list all maps in command line mode that start with the beginning.
:dm[ap] beginning
list all maps in dialog modes that start with the beginning.
:mm[ap] beginning
list all maps in menu mode that start with the beginning.
:nm[ap] beginning
list all maps in normal mode that start with the beginning.
:qm[ap] beginning
list all maps in view mode that start with the beginning.
:vm[ap] beginning
list all maps in visual mode that start with the beginning.
:noremap
:no[remap] lhs rhs
map the key sequence lhs to rhs for normal and visual modes, but don't expand user
mappings in rhs.
:no[remap]! lhs rhs
map the key sequence lhs to rhs for command line mode, but don't expand user
mappings in rhs.
:cnoremap :dnoremap :mnoremap :nnoremap :qnoremap :vnoremap
:cno[remap] lhs rhs
map the key sequence lhs to rhs for command line mode, but don't expand user
mappings in rhs.
:dn[oremap] lhs rhs
map the key sequence lhs to rhs for dialog modes, but don't expand user mappings in
rhs.
:mn[oremap] lhs rhs
map the key sequence lhs to rhs for menu mode, but don't expand user mappings in
rhs.
:nn[oremap] lhs rhs
map the key sequence lhs to rhs for normal mode, but don't expand user mappings in
rhs.
:qn[oremap] lhs rhs
map the key sequence lhs to rhs for view mode, but don't expand user mappings in
rhs.
:vn[oremap] lhs rhs
map the key sequence lhs to rhs for visual mode, but don't expand user mappings in
rhs.
:unmap
:unm[ap] lhs
remove user mapping of lhs from normal and visual modes.
:unm[ap]! lhs
remove user mapping of lhs from command line mode.
:cunmap :dunmap :munmap :nunmap :qunmap :vunmap
:cu[nmap] lhs
remove user mapping of lhs from command line mode.
:du[nmap] lhs
remove user mapping of lhs from dialog modes.
:mu[nmap] lhs
remove user mapping of lhs from menu mode.
:nun[map] lhs
remove user mapping of lhs from normal mode.
:qun[map] lhs
remove user mapping of lhs from view mode.
:vu[nmap] lhs
remove user mapping of lhs from visual mode.
Ranges
The ranges implemented include:
2,3 - from second to third file in the list (including it)
% - the entire directory.
. - the current position in the filelist.
$ - the end of the filelist.
't - the mark position t.
Examples:
:%delete
would delete all files in the directory.
:2,4delete
would delete the files in the list positions 2 through 4.
:.,$delete
would delete the files from the current position to the end of the filelist.
:3delete4
would delete the files in the list positions 3, 4, 5, 6.
If a backward range is given :4,2delete - an query message is given and user can chose
what to do next.
The builtin commands that accept a range are :d[elete] and :y[ank].
Command macros
The command macros may be used in user commands.
%a User arguments. When user arguments contain macros, they are expanded before
preforming substitution of %a.
%c %"c The current file under the cursor.
%C %"C The current file under the cursor in the other directory.
%f %"f All of the selected files, but see "Selection" section below.
%F %"F All of the selected files in the other directory list, but see "Selection" section
below.
%b %"b Same as %f %F.
%d %"d Full path to current directory.
%D %"D Full path to other file list directory.
%rx %"rx
Full paths to files in the register {x}. In case of invalid symbol in place of
{x}, it's processed with the rest of the line and default register is used.
%m Show command output in a menu.
%M Same as %m, but l (or Enter) key is handled like for :locate and :find commands.
%u Process command output as list of paths and compose custom view out of it.
%U Same as %u, but implies less list updates inside vifm, which is absence of sorting
at the moment.
%Iu Same as %u, but gives up terminal before running external command.
%IU Same as %U, but gives up terminal before running external command.
%S Show command output in the status bar.
%q Redirect command output to quick view, which is activated if disabled.
%s Execute command in horizontally split window of active terminal multiplexer
(ignored if not running inside one).
%v Same as %s, but splits vertically.
%n Forbid use of terminal multiplexer to run the command.
%i Completely ignore command output. For background jobs this suppresses error
dialogs, while still storing errors internally for viewing via :jobs menu.
%Pl Pipe list of files to standard input of a command.
%Pz Same as %Pz, but separates paths by null ('\0') character.
%pc Marks the end of the main command and the beginning of the clear command for
graphical preview, which is invoked on closing preview of a file.
%pd Marks a preview command as one that directly communicates with the terminal.
Beware that this is for things like sixel which are self-contained sequences that
depend only on current cursor position, using this with anything else is likely to
mangle terminal state.
The following dimensions and coordinates are in characters:
%px x coordinate of top-left corner of preview area.
%py y coordinate of top-left corner of preview area.
%pw width of preview area.
%ph height of preview area.
Use %% if you need to put a percent sign in your command.
Note that %i, %Iu, %IU, %m, %M, %n, %q, %s, %S, %u, %U and %v macros are mutually
exclusive. Only the last one of them on the command will take effect.
Note that %Pl and %Pz are mutually exclusive. Only the last one of them on the command
will take effect.
You can use file name modifiers after %c, %C, %f, %F, %b, %d and %D macros. Supported
modifiers are:
- :p - full path
- :u - UNC name of path (e.g. "\\server" in "\\server\share"), Windows only.
Expands to current computer name for not UNC paths.
- :~ - relative to the home directory
- :. - relative to current directory
- :h - head of the file name
- :t - tail of the file name
- :r - root of the file name (without last extension)
- :e - extension of the file name (last one)
- :s?pat?sub? - substitute the first occurrence of pat with sub. You can use any
character for '?', but it must not occur in pat or sub.
- :gs?pat?sub? - like :s, but substitutes all occurrences of pat with sub.
See ':h filename-modifiers' in Vim's documentation for the detailed description.
Using %x means expand corresponding macro escaping all characters that have special
meaning. And %"x means using of double quotes and escape only backslash and double quote
characters, which is more useful on Windows systems.
Position and quantity (if there is any) of %m, %M, %S or %s macros in the command is
unimportant. All their occurrences are removed from the resulting command.
%c and %f macros are expanded to file names only, when %C and %F are expanded to full
paths. %f and %F follow this in %b too.
:com move mv %f %D
set the :move command to move all of the files selected in the current directory to
the other directory.
The %a macro is replaced with any arguments given to an alias command. All arguments are
considered optional.
:com lsl !!ls -l %a - set the lsl command to execute ls -l with or without an
argument.
:lsl<Enter>
will list the directory contents of the current directory.
:lsl filename<Enter>
will list only the given filename.
The macros can also be used in directly executing commands. ":!mv %f %D" would move the
current directory selected files to the other directory.
Appending & to the end of a command causes it to be executed in the background. Typically
you want to run two kinds of external commands in the background:
- GUI applications that doesn't fork thus block vifm (:!sxiv %f &);
- console tools that do not work with terminal (:!mv %f %D &).
You don't want to run terminal commands, which require terminal input or output something
in background because they will mess up vifm's TUI. Anyway, if you did run such a
command, you can use Ctrl-L key to update vifm's TUI.
Rewriting the example command with macros given above with backgrounding:
%m, %M, %s, %S, %u and %U macros cannot be combined with background mark (" &") as it
doesn't make much sense.
Command backgrounding
Copy and move operation can take a lot of time to proceed. That's why vifm supports
backgrounding of this two operations. To run :copy, :move or :delete command in the
background just add " &" at the end of a command.
For each background operation a new thread is created. Job cancellation can be requested
in the :jobs menu via dd shortcut.
You can see if command is still running in the :jobs menu. Backgrounded commands have
progress instead of process id at the line beginning.
Background operations cannot be undone.
Cancellation
Note that cancellation works somewhat different on Windows platform due to different
mechanism of break signal propagation. One also might need to use Ctrl-Break shortcut
instead of Ctrl-C.
There are two types of operations that can be cancelled:
- file system operations;
- mounting with FUSE (but not unmounting as it can cause loss of data);
- calls of external applications.
Note that vifm never terminates applications, it sends SIGINT signal and lets the
application quit normally.
When one of set of operations is cancelled (e.g. copying of 5th file of 10 files), further
operations are cancelled too. In this case undo history will contain only actually
performed operations.
Cancelled operations are indicated by "(cancelled)" suffix appended to information message
on statusbar.
File system operations
Currently the following commands can be cancelled: :alink, :chmod, :chown, :clone, :copy,
:delete, :mkdir, :move, :restore, :rlink, :touch. File putting (on p/P key) can be
cancelled as well. It's not hard to see that these are mainly long-running operations.
Cancelling commands when they are repeated for undo/redo operations is allowed for
convenience, but is not recommended as further undo/redo operations might get blocked by
side-effects of partially cancelled group of operations.
These commands can't be cancelled: :empty, :rename, :substitute, :tr.
Mounting with FUSE
It's not considered to be an error, so only notification on the status bar is shown.
External application calls
Each of this operations can be cancelled: :apropos, :find, :grep, :locate.
Selection
If there is a selection, it's stashed before proceeding further unless file under the
cursor is part of that selection. This means that when macros are expanded for :filetype
or :filextype programs, `%f` and `%F` become equivalent to `%c` and `%C` respectively if
current file is not selected. So you run selection by running one of selected files,
otherwise you're running a single file even if there are other selected entries.
When running a selection it must not include broken symbolic links, has to be consistent
and set of file handlers must be compatible. Consistency means that selection contains
either only directories (including links to them) or only files, but not their mix.
Compatibility is a more sophisticated check, but it's defined in a natural way so that you
get what you'd expect. The following properties of selection are taken into account while
checking it for compatibility and deciding how to handle it:
1. If there any files for which handler isn't defined, then all files are opened using
'vicmd' or 'vixcmd'.
2. If all handlers match the following criteria:
- backgrounded
- include `%c` and/or `%C`
- include neither `%f` nor `%F`
then each file is executed independently of the rest.
3. If all handlers are equal, the common handler is executed. This handler might ignore
selection and process only file under the cursor.
4. Otherwise, an error is reported, because handlers differ and they don't support
parallel execution.
Patterns
:highlight, :filetype, :filextype, :fileviewer commands and 'classify' option support
globs, regular expressions and mime types to match file names or their paths.
There are six possible ways to write a single pattern:
1. [!]{comma-separated-name-globs}
2. [!]{{comma-separated-path-globs}}
3. [!]/name-regular-expression/[iI]
4. [!]//path-regular-expression//[iI]
5. [!]<comma-separated-mime-type-globs>
6. undecorated-pattern
First five forms can include leading exclamation mark that negates pattern matching.
The last form is implicitly refers to one of others. :highlight does not accept
undecorated form, while :filetype, :filextype, :fileviewer, :select, :unselect and
'classify' treat it as list of name globs.
Path patterns receive absolute path of the file that includes its name component as well.
To combine several patterns (AND them), make sure you're using one of the first five forms
and write patterns one after another, like this:
<text/plain>{*.vifm}
Mind that if you make a mistake the whole string will be treated as the sixth form.
:filetype, :filextype and :fileviewer commands accept comma-separated list of patterns
instead of a single pattern, thus effectively handling OR operation on them:
<text/plain>{*.vifm},<application/pdf>{*.pdf}
Forms that accept comma-separated lists of patterns also process them as lists of
alternatives.
Patterns with regular expressions
Regular expression patterns are case insensitive by default, see description of commands,
which might override default behaviour.
Flags of regular expressions mean the following:
- "i" makes filter case insensitive;
- "I" makes filter case sensitive. They can be repeated multiple times, but the later
one takes precedence (e.g. "iiiI" is equivalent to "I" and "IiIi" is the same as "i").
There are no implicit `^` or `$`, so make sure to specify them explicitly if the pattern
should match the whole name or path.
Patterns with globs
"Globs" section below provides short overview of globs and some important points that one
needs to know about them.
Patterns with mime-types
Mime type matching is essentially globs matching applied to mime type of a file instead of
its name/path. Note: mime types aren't detected on Windows.
Examples
Associate `evince` to PDF-files only inside `/home/user/downloads/` directory (excluding
its subdirectories):
:filextype //^/home/user/downloads/[^/]*.pdf$// evince %f
Globs
Globs are always case insensitive as it makes sense in general case.
`*`, `?`, `[` and `]` are treated as special symbols in the pattern. E.g.
:filetype * less %c
matches all files. One can use character classes for escaping, so
:filetype [*] less %c
matches only one file name, the one which contains only asterisk symbol.
`*` means any number of any characters (possibly an empty substring), with one exception:
asterisk at the pattern beginning doesn't match dot in the first position. E.g.
:fileviewer *.zip,*.jar zip -sf %c
associates using of `zip` program to preview all files with `zip` or `jar` extensions as
listing of their content, but `.file.zip` won't be matched.
`?` means any character at this position. E.g.
:fileviewer ?.out file %c
calls `file` tool for all files which have exactly one character before their extension
(e.g. a.out, b.out).
Square brackets designate character class, which means that whole character class matches
against any of characters listed in it. For example
:fileviewer *.[ch] highlight -O xterm256 -s dante --syntax c %c
makes vifm call `highlight` program to colorize source and header files in C language for
a 256-color terminal. Equal command would be
:fileviewer *.c,*.h highlight -O xterm256 -s dante --syntax c %c
Inside square brackets `^` or `!` can be used for symbol class negotiation and the `-`
symbol to set a range. `^` and `!` should appear right after the opening square bracket.
For example
:filetype *.[!d]/ inspect_dir
associates `inspect_dir` as additional handler for all directories that have one character
extension unless it's "d" letter. And
:filetype [0-9].jpg sxiv
associates `sxiv` picture viewer only for JPEG-files that contain single digit in their
name.
If you need to include literal comma, which is normally separates multiple globs, double
it.
:set options
Local options
These are kind of options that are local to a specific view. So you can set
ascending sorting order for left pane and descending order for right pane.
In addition to being local to views, each such option also has two values:
- local to current directory (value associated with current location);
- global to current directory (value associated with the pane).
The idea is that current directory can be made a temporary exception to regular
configuration of the view, until directory change. Use :setlocal for that.
:setglobal changes view value not affecting settings until directory change. :set
applies changes immediately to all values.
'aproposprg'
type: string
default: "apropos %a"
Specifies format for an external command to be invoked by the :apropos command.
The format supports expanding of macros, specific for a particular *prg option, and
%% sequence for inserting percent sign literally. This option should include the
%a macro to specify placement of arguments passed to the :apropos command. If the
macro is not used, it will be implicitly added after a space to the value of this
option.
'autochpos'
type: boolean
default: true
When disabled vifm will set cursor to the first line in the view after :cd and
:pushd commands instead of saved cursor position. Disabling this will also make
vifm clear information about cursor position in the view history on :cd and :pushd
commands (and on startup if 'autochpos' is disabled in the vifmrc). l key in the
":history ." and ":trashes" menus are treated like :cd command. This option also
affects marks so that navigating to a mark doesn't restore cursor position.
When this option is enabled, more fine grained control over cursor position is
available via 'histcursor' option.
'columns' 'co'
type: integer
default: terminal width on startup
Terminal width in characters.
'caseoptions'
type: charset
default: ""
This option gives additional control over case sensitivity by allowing overriding
default behaviour to either always be case sensitive or always be case insensitive.
Possible values form pairs of lower and upper case letters that configure specific
aspect of behaviour:
p - always ignore case of paths during completion.
P - always match case of paths during completion.
g - always ignore case of characters for f/F/;/,.
G - always match case of characters for f/F/;/,.
At most one item of each pair takes affect, if both or more are present, only the
last one matters. When none of pair's elements are present, the behaviour is
default (depends on operating system for path completion and on values of
'ignorecase' and 'smartcase' options for file navigation).
'cdpath' 'cd'
type: string list
default: value of $CDPATH with commas instead of colons
Specifies locations to check on changing directory with relative path that doesn't
start with "./" or "../". When non-empty, current directory is examined after
directories listed in the option.
This option doesn't affect completion of :cd command.
Example:
set cdpath=~
This way ":cd bin" will switch to "~/bin" even if directory named "bin" exists in
current directory, while ":cd ./bin" command will ignore value of 'cdpath'.
'chaselinks'
type: boolean
default: false
When enabled path of view is always resolved to real path (with all symbolic links
expanded).
'classify'
type: string list
default: ":dir:/"
Specifies file name prefixes and suffixes depending on file type or name. The
format is either of:
- [{prefix}]:{filetype}:[{suffix}]
- [{prefix}]::{pattern}::[{suffix}]
Possible {pattern} forms are described in "Patterns" section above.
Priority rules:
- file name patterns have priority over type patterns
- file name patterns are matched in left-to-right order of their appearance in
this option
Either {prefix} or {suffix} or both can be omitted (which is the default for all
unspecified file types), this means empty {prefix} and/or {suffix}. {prefix} and
{suffix} should consist of at most eight characters. Elements are separated by
commas. Neither prefixes nor suffixes are part of file names, so they don't affect
commands which operate on file names in any way. Comma (',') character can be
inserted by doubling it. List of file type names can be found in the description
of filetype() function.
'confirm' 'cf'
type: set
default: delete,permdelete
Defines which operations require confirmation:
- delete - moving files to trash (on d or :delete);
- permdelete - permanent deletion of files (on D or :delete! command or on
undo/redo operation).
'cpoptions' 'cpo'
type: charset
default: "fst"
Contains a sequence of single-character flags. Each flag enables behaviour of
older versions of vifm. Flags:
- f - when included, running :filter command results in not inverted (matching
files are filtered out) and :filter! in inverted (matching files are left) filter,
when omitted, meaning of the exclamation mark changes to the opposite;
- s - when included, yy, dd and DD normal mode commands act on selection,
otherwise they operate on current file only;
- t - when included, <tab> (thus <c-i>) behave as <space> and switches active
pane, otherwise <tab> and <c-i> go forward in the view history. It's possible to
make both <tab> and <c-i> to work as expected by setting up the terminal to emit a
custom sequence when <c-i> is pressed; see :histnext for details.
'cvoptions'
type: set
default:
Specifies whether entering/leaving custom views triggers events that normally
happen on entering/leaving directories:
- autocmds - trigger autocommands on entering/leaving custom views;
- localopts - reset local options on entering/leaving custom views;
- localfilter - reset local filter on entering/leaving custom views.
'deleteprg'
type: string
default: ""
Specifies program to run on files that are permanently removed. When empty, files
are removed as usual, otherwise this command is invoked on each file by appending
its name. If the command doesn't remove files, they will remain on the file
system.
'dirsize'
type: enumeration
default: size
Controls how size of directories is displayed in file views. The following values
are possible:
- size - size of directory (i.e., size used to store list of files)
- nitems - number of entries in the directory (excluding . and ..)
Size obtained via ga/gA overwrites this setting so seeing count of files and
occasionally size of directories is possible.
'dotdirs'
type: set
default: nonrootparent,treeleafsparent
Controls displaying of dot directories. The following values are possible:
- rootparent - show "../" in root directory of file system
- nonrootparent - show "../" in non-root directories of file system
- treeleafsparent - show "../" in empty directories of tree view
Note that empty directories always contain "../" entry regardless of value of this
option. "../" disappears at the moment at least one file is created.
'dotfiles'
type: boolean
default: false
Whether dot files are shown in the view. Can be controlled with z* bindings.
'fastrun'
type: boolean
default: false
With this option turned on you can run partially entered commands with unambiguous
beginning using :! (e.g. :!Te instead of :!Terminal or :!Te<tab>).
'fillchars' 'fcs'
type: string list
default: ""
Sets characters used to fill borders.
item default used for
vborder:c ' ' left, middle and right vertical borders
If value is omitted, its default value is used. Example:
set fillchars=vborder:.
'findprg'
type: string
default: "find %s %a -print , -type d \( ! -readable -o ! -executable \) -prune"
Specifies format for an external command to be invoked by the :find command. The
format supports expansion of macros specific for this particular option and %%
sequence for inserting percent sign literally. The macros are:
macro value/meaning
%s literal arguments of :find or
list of paths to search in
%A empty or
literal arguments of :find
%a empty or
literal arguments of :find or
predicate followed by escaped arguments of :find
%p empty or
literal arguments of :find or
escaped arguments (parameters) of :find
%u redirect output to custom view instead of showing a menu
%U redirect output to unsorted custom view instead of showing a menu
Predicate in %a is "-name" on *nix and "-iname" on Windows.
If both %u and %U are specified, %U is chosen.
Some macros can be added implicitly:
- if %s isn't present, it's appended
- if neither of %a, %A and %p is present, %a is appended
- if neither of %s, %a, %A and %p is present, %s and %a are appended in this order
The macros slightly change their meaning depending on format of :find's arguments:
- if the first argument points to an existing directory, %s is assigned all
arguments while %a, %A and %p are left empty
- otherwise:
- %s is assigned a dot (".") meaning current directory or list of selected file
names, if any
- %a, %A and %p are assigned literal arguments when first argument starts with
a dash ("-"), otherwise %a gets an escaped version of the arguments with a
predicate and %p contains escaped version of the arguments
Starting with Windows Server 2003 a `where` command is available. One can
configure vifm to use it in the following way:
set findprg="where /R %s %A"
As the syntax of this command is rather limited, one can't use :find command with
selection of more than one item because the command ignores all directory paths
except for the last one.
When using find port on Windows, another option is to setup 'findprg' like this:
set findprg="find %s %a"
'followlinks'
type: boolean
default: true
Follow links on l or Enter. That is navigate to destination file instead of
treating the link as if it were target file. Doesn't affects links to directories,
which are always entered (use gf key for directories).
'fusehome'
type: string
default: "($XDG_DATA_HOME/.local/share | $VIFM)/fuse/"
Directory to be used as a root dir for FUSE mounts. Value of the option can
contain environment variables (in form "$envname"), which will be expanded (prepend
it with a slash to prevent expansion). The value should expand to an absolute
path.
If you change this option, vifm won't remount anything. It affects future mounts
only. See "Automatic FUSE mounts" section below for more information.
'gdefault' 'gd'
type: boolean
default: false
When on, 'g' flag is on for :substitute by default.
'grepprg'
type: string
default: "grep -n -H -I -r %i %a %s"
Specifies format for an external command to be invoked by the :grep command. The
format supports expanding of macros, specific for a particular *prg option, and %%
sequence for inserting percent sign literally. This option should include the %i
macro to specify placement of "-v" string when inversion of results is requested,
%a or %A macro to specify placement of arguments passed to the :grep command and
the %s macro to specify placement of list of files to search in. If some of the
macros are not used, they will be implicitly added after a space to the value of
the 'grepprg' option in the following order: %i, %a, %s. Note that when neither %a
nor %A are specified, it's %a which is added implicitly.
Optional %u or %U macro could be used (if both specified %U is chosen) to force
redirection to custom or unsorted custom view respectively.
See 'findprg' option for description of difference between %a and %A.
Example of setup to use ack (http://beyondgrep.com/) instead of grep:
set grepprg='ack -H -r %i %a %s'
or The Silver Searcher (https://github.com/ggreer/the_silver_searcher):
set grepprg='ag --line-numbers %i %a %s'
'histcursor'
type: set
default: startup,dirmark,direnter
Defines situations when cursor should be moved according to directory history:
- startup - on loading file lists during startup
- dirmark - after navigating to a mark that doesn't specify file
- direnter - on opening directory from a file list
This option has no effect when 'autochpos' is disabled.
Note that the list is not exhaustive and there are other situations when cursor is
positioned automatically.
'history' 'hi'
type: integer
default: 15
Maximum number of stored items in all histories.
'hlsearch' 'hls'
type: boolean
default: true
Automatically select files that are search matches.
'iec' type: boolean
default: false
Use KiB, MiB, ... suffixes instead of K, M, ... when printing size in human-
friendly format.
'ignorecase' 'ic'
type: boolean
default: false
Ignore case in search patterns (:substitute, / and ? commands), local filter (but
not the rest of filters) and other things detailed in the description of
'caseoptions'.
'incsearch' 'is'
type: boolean
default: false
When this option is set, search and view update for local filter is be performed
starting from initial cursor position each time search pattern is changed.
'iooptions'
type: set
default:
Controls details of file operations. The following values are available:
- fastfilecloning - perform fast file cloning (copy-on-write), when available
(available on Linux and btrfs file system).
'laststatus' 'ls'
type: boolean
default: true
Controls if status bar is visible.
'lines'
type: integer
default: terminal height on startup
Terminal height in lines.
'locateprg'
type: string
default: "locate %a"
Specifies format for an external command to be invoked by the :locate command. The
format supports expanding of macros, specific for a particular *prg option, and %%
sequence for inserting percent sign literally. This option should include the %a
macro to specify placement of arguments passed to the :locate command. If the
macro is not used, it will be implicitly added after a space to the value of this
option.
Optional %u or %U macro could be used (if both specified %U is chosen) to force
redirection to custom or unsorted custom view respectively.
'mediaprg'
type: string
default: path to bundled script that supports udevil, udisks and udisks2
(using udisks2 requires python with dbus module installed)
OS X: path points to a python script that uses diskutil
{only for *nix}
Specifies command to be used to manage media devices. Used by :media command.
The command can be passed the following parameters:
- list -- list media
- mount {device} -- mount a device
- unmount {path} -- unmount given mount point
The output of `list` subcommand is parsed in search of lines that start with one of
the following prefixes:
- device= - specifies device path (e.g., "/dev/sde")
- label= - specifies optional device label (e.g., "Memory card")
- info= - specifies arbitrary text to display next to device (by
default "[label]" is used, if label is provided)
- mount-point= - specifies a mount point (can be absent or appear more than once)
All other lines are ignored. Each `device=` starts a new section describing a
device which should include two other possible prefixes.
`list` subcommand is assumed to always succeed, while exit code of `mount` and
`unmount` is taken into account to determine whether operation was performed
successfully.
'lsoptions'
type: string list
default: ""
scope: local
Configures ls-like view.
item used for
transposed filling view grid by columns rather than by lines
'lsview'
type: boolean
default: false
scope: local
When this option is set, directory view will be displayed in multiple columns with
file names similar to output of `ls -x` command. See "ls-like view" section below
for format description. This option has no effect if 'millerview' is on.
'milleroptions'
type: string list
default: "lsize:1,csize:1,rsize:1,rpreview:dirs"
scope: local
Configures miller view.
item default used for
lsize:num 0 left column
csize:num 1 center column (can't be disabled)
rsize:num 0 right column
rpreview:str dirs right column
*size specifies ratios of columns. Each ratio is in the range from 0 to 100 and
values are adjusted to fit the limits. Zero disables a column, but central (main)
column can't be disabled.
rpreview specifies what file-system objects should be previewed in the right column
and can take two values: dirs (only directories) or all. Both options don't
include parent directory ("..").
Example of two-column mode which is useful in combination with :view command:
set milleroptions=lsize:1,csize:2
'millerview'
type: boolean
default: false
scope: local
When this option is set, directory view will be displayed in multiple cascading
columns. Ignores 'lsview'.
'mintimeoutlen'
type: integer
default: 150
The fracture of 'timeoutlen' in milliseconds that is waited between subsequent
input polls, which affects various asynchronous operations (detecting changes made
by external applications, monitoring background jobs, redrawing UI). There are no
strict guarantees, however the higher this value is, the less is CPU load in idle
mode.
'number' 'nu'
type: boolean
default: false
scope: local
Print line number in front of each file name when 'lsview' option is turned off.
Use 'numberwidth' to control width of line number. Also see 'relativenumber'.
'numberwidth' 'nuw'
type: integer
default: 4
scope: local
Minimal number of characters for line number field.
'previewoptions'
type: string list
default: "graphicsdelay:50000"
Tweaks how previewing is done (in quick view, miller view's column and view mode).
item default meaning
graphicsdelay:num 0 delay before drawing graphics (microseconds)
hardgraphicsclear unset redraw screen to get rid of graphics
toptreestats unset show file counts before the tree
graphicsdelay is needed if terminal requires some timeout before it can draw
graphics (otherwise it gets lost).
hardgraphicsclear seems to be necessary to get rid of sixel graphics in some
terminals, where it otherwise lingers. This can cause flicker on the screen due to
erasure followed by redrawing.
'previewprg'
type: string
default: ""
scope: local
External command to be used instead of preview programs configured via :fileviewer
command.
Example:
" always show git log in preview of files inside some repository
au DirEnter '~/git-repo/**/*' setl previewprg='git log --color -- %c 2>&1'
'quickview'
type: boolean
default: false
Whether quick view (:view) is currently active or not.
'relativenumber' 'rnu'
type: boolean
default: false
scope: local
Print relative line number in front of each file name when 'lsview' option is
turned off. Use 'numberwidth' to control width of line number. Various
combinations of 'number' and 'relativenumber' lead to such results:
nonumber number
norelativenumber | first | 1 first
| second | 2 second
| third | 3 third
relativenumber | 1 first | 1 first
| 0 second |2 second
| 1 third | 1 third
'rulerformat' 'ruf'
type: string
default: "%l/%S "
Determines the content of the ruler. Its minimal width is 13 characters and it's
right aligned. Following macros are supported:
%= - separation point between left and right aligned halves of the line
%l - file number
%L - total number of files in view (including filtered out ones)
%x - number of files excluded by filters
%0- - old name for %x macro
%P - percentage through file list (All, Top, xx% or Bot), always 3 in length
%S - number of displayed files
%= - separation point between left and right align items
%% - literal percent sign
%[ - designates beginning of an optional block
%] - designates end of an optional block
Percent sign can be followed by optional minimum field width. Add '-' before
minimum field width if you want field to be right aligned.
Optional blocks are ignored unless at least one macro inside of them is expanded to
a non-empty value.
Example:
set rulerformat='%2l-%S%[ +%x%]'
'runexec'
type: boolean
default: false
Run executable file on Enter, l or Right Arrow key. Behaviour of the last two
depends on the value of the 'lsview' option.
'scrollbind' 'scb'
type: boolean
default: false
When this option is set, vifm will try to keep difference of scrolling positions of
two windows constant.
'scrolloff' 'so'
type: integer
default: 0
Minimal number of screen lines to keep above and below the cursor. If you want
cursor line to always be in the middle of the view (except at the beginning or end
of the file list), set this option to some large value (e.g. 999).
'sessionoptions' 'ssop'
sessionoptions ssop
type: set
default: tui,state,tabs,savedirs,dhistory
An equivalent of 'vifminfo' for sessions, uses the same values. When both options
include the same value, data from session file has higher priority (data from
vifminfo isn't necessarily completely discarded, instead it's merged with the state
of a session the same way state of multiple instances is merged on exit).
'shell' 'sh'
type: string
default: $SHELL or "/bin/sh" or "cmd" (on MS-Windows)
Full path to the shell to use to run external commands. On *nix a shell argument
can be supplied.
'shellcmdflag' 'shcf'
type: string
default: "-c" or "/C" (for cmd.exe on MS-Windows)
Command-line option used to pass a command to 'shell'. It's used in contexts where
command comes from the user.
Note that using this option to force interactive mode of the shell is most likely a
BAD IDEA. In general interactive host and interactive child shell can't share the
same terminal session. You can't even run such a shell in background. Consider
writing a wrapper for your shell that preloads aliases and commands without making
the shell interactive and ending up using it in a way it was not meant to be used.
Note that this option is ignored when 'shell' is set to PowerShell due to the
internal use of `-encodedCommand`.
'shortmess' 'shm'
type: charset
default: "p"
Contains a sequence of single-character flags. Each flag enables shortening of
some message displayed by vifm in the TUI. Flags:
- L - display only last directory in tab line instead of full path.
- M - shorten titles in windows of terminal multiplexers created by vifm down to
file name instead of using full path.
- T - truncate status-bar messages in the middle if they are too long to fit on
the command line. "..." will appear in the middle.
- p - use tilde shortening in view titles.
'showtabline' 'stal'
type: enumeration
default: multiple
Specifies when tab line should be displayed. Possible values:
- never - never display tab line
- multiple - show tab line only when there are at least two tabs
- always - display tab line always
Alternatively 0, 1 and 2 Vim-like values are also accepted and correspond to
"never", "multiple" and "always" respectively.
'sizefmt'
type: string list
default: "units:iec"
Configures the way size is formatted in human-friendly way.
item value meaning
units: iec Use 1024 byte units (K or KiB, etc.).
See 'iec' option.
si Use 1000 byte units (KB, etc.).
precision: i > 0 How many fraction digits to consider.
{not set} Precision of 1 for integer part < 10,
0 otherwise (provides old behaviour).
space {present} Insert space before unit symbols.
This is the default.
nospace {present} Do not insert space before unit symbols.
Numbers are rounded from zero. Trailing zeros are dropped.
Example:
set sizefmt=units:iec,precision:2,nospace
'slowfs'
type: string list
default: ""
only for *nix
A list of mounter fs name beginnings (first column in /etc/mtab or /proc/mounts) or
paths prefixes for fs/directories that work too slow for you. This option can be
used to stop vifm from making some requests to particular kinds of file systems
that can slow down file browsing. Currently this means don't check if directory
has changed, skip check if target of symbolic links exists, assume that link target
located on slow fs to be a directory (allows entering directories and navigating to
files via gf). If you set the option to "*", it means all the systems are
considered slow (useful for cygwin, where all the checks might render vifm very
slow if there are network mounts).
Example for autofs root /mnt/autofs:
set slowfs+=/mnt/autofs
'smartcase' 'scs'
type: boolean
default: false
Overrides the ignorecase option if a pattern contains at least one upper case
character. Only used when 'ignorecase' option is enabled.
'sort' type: string list
default: +name on *nix and +iname on Windows
scope: local
Sets list of sorting keys (first item is primary key, second is secondary key,
etc.):
[+-]ext - extension of files and directories
[+-]fileext - extension of files only
[+-]name - name (including extension)
[+-]iname - name (including extension, ignores case)
[+-]type - file type (dir/reg/exe/link/char/block/sock/fifo)
[+-]dir - directory grouping (directory < file)
[+-]gid - group id (*nix only)
[+-]gname - group name (*nix only)
[+-]mode - file type derived from its mode (*nix only)
[+-]perms - permissions string (*nix only)
[+-]uid - owner id (*nix only)
[+-]uname - owner name (*nix only)
[+-]nlinks - number of hard links (*nix only)
[+-]inode - inode number (*nix only)
[+-]size - size
[+-]nitems - number of items in a directory (zero for files)
[+-]groups - groups extracted via regexps from 'sortgroups'
[+-]target - symbolic link target (empty for other file types)
[+-]atime - time accessed (e.g., read, executed)
[+-]ctime - time changed (changes in metadata, like mode)
[+-]mtime - time modified (when file contents is changed)
Note: look for st_atime, st_ctime and st_mtime in "man 2 stat" for more information
on time keys.
'+' means ascending sort for this key, and '-' means descending sort.
"dir" key is somewhat similar in this regard but it's added implicitly: when "dir"
is not specified, sorting behaves as if it was the first key in the list. That's
why if one wants sorting algorithm to mix directories and files, "dir" should be
appended to sorting option, for example like this:
set sort+=dir
or
set sort=-size,dir
Value of the option is checked to include dir key and default sorting key (name on
*nix, iname on Windows). Here is what happens if one of them is missing:
- type key is added at the beginning;
- default key is added at the end;
all other keys are left untouched (at most they are moved).
This option also changes view columns according to primary sorting key set, unless
'viewcolumns' option is not empty.
'sortnumbers'
type: boolean
default: false
scope: local
Natural sort of (version) numbers within text.
'sortgroups'
type: string
default: ""
scope: local
Sets comma-separated list of regular expressions for group type of sorting. Double
the comma to insert it literally.
The regular expressions are used to extract substrings of file names to serve as
keys for sorting. It is essentially a way to ignore uninteresting parts of file
names during sorting by name.
Each expression should contain at least one group or its value will be considered
to be always empty. Also, only the first match of regular expression is processed.
The first group divides list of files into sub-groups, each of which is then sorted
by substrings extracted using second regular expression and so on recursively.
Example:
set sortgroups=-(todo|done).*
this would group files with "-done" in their names and files with "-todo"
separately. On ascending sorting, group containing "-done" would appear before the
other one.
'sortorder'
type: enumeration
default: ascending
Sets sort order for primary key: ascending, descending.
'statusline' 'stl'
type: string
default: ""
Determines the content of the status line (the line right above command-line).
Empty string means use same format like in previous versions. Following macros are
supported:
- %N - line break (increases height of the status line accordingly), ignores %[ %]
blocks
- %t - file name (considering value of the 'classify' option)
- %T - symbolic link target (empty for other filetypes)
- %f - file name relative to current directory (considers 'classify')
- %A - file attributes (permissions on *nix or properties on Windows)
- %u - user name or uid (if it cannot be resolved)
- %g - group name or gid (if it cannot be resolved)
- %s - file size in human readable format
- %E - size of selected files in human readable format, same as %s when no files
are selected, except that it will never show size of ../ in visual mode, since it
cannot be selected
- %d - file modification date (uses 'timefmt' option)
- %D - path of the other pane for single-pane layout
- %a - amount of free space available on current FS
- %c - size of current FS
- %z - short tips/tricks/hints that chosen randomly after one minute period
- %{<expr>} - evaluate arbitrary vifm expression '<expr>', e.g. '&sort'
- %* - resets or applies one of User1..User9 highlight groups; reset happens when
width field is 0 or not specified, one of groups gets picked when width field is
in the range from 1 to 9
- all 'rulerformat' macros
Percent sign can be followed by optional minimum field width. Add '-' before
minimum field width if you want field to be right aligned.
On Windows file properties include the following flags (upper case means flag is
on):
A - archive
H - hidden
I - content isn't indexed
R - readonly
S - system
C - compressed
D - directory
E - encrypted
P - reparse point (e.g. symbolic link)
Z - sparse file
Example without colors:
set statusline=" %t%= %A %10u:%-7g %15s %20d %{&sort} "
Example with colors:
highlight User1 ctermbg=yellow
highlight User2 ctermbg=blue ctermfg=white cterm=bold
set statusline="%1* %-26t %2* %= %1* %A %2* %7u:%-7g %1* %-5s %2* %d "
'suggestoptions'
type: string list
default:
Controls when, for what and how suggestions are displayed. The following values
are available:
- normal - in normal mode;
- visual - in visual mode;
- view - in view mode;
- otherpane - use other pane to display suggestions, when available;
- delay[:num] - display suggestions after a small delay (to do not annoy if
you just want to type a fast shortcut consisting of multiple keys), num specifies
the delay in ms (500 by default), 'timeoutlen' at most;
- keys - include shortcuts (commands and selectors);
- foldsubkeys - fold multiple keys with common prefix;
- marks - include marks;
- registers[:num] - include registers, at most num files (5 by default).
'syncregs'
type: string
default:
Specifies identifier of group of instances that share registers between each other.
When several instances of vifm have this option set to identical value, they
automatically synchronize contents of their registers on operations which use them.
'syscalls'
type: boolean
default: false
When disabled, vifm will rely on external applications to perform file-system
operations, otherwise system calls are used instead (much faster and supports
progress tracking). The option should eventually be removed. Mostly *nix-like
systems are affected.
'tablabel'
type: string
default: ""
When non-empty, determines format of the main part of a single tab's label.
When empty, tab label is set to either tab name for named tabs or to view title
(usually current path) for unnamed tabs.
The following macros can appear in the format (see below for what a flag is):
- %C - flag of a current tab
- %N - number of the tab
- %T - flag of a tree mode
- %c - description of a custom view
- %n - name of the tab
- %p - path of the view (handles filename modifiers)
- %t - title of the view (affected by 'shortmess' flags)
- %% - literal percent sign
- %[ - designates beginning of an optional block
- %] - designates end of an optional block
- %*, %0* - resets highlighting
- %1-%9 - applies one of User1..User9 highlight groups
In global tabs the view in bullets above refers to currently active view of that
tab.
Flag macros are a special kind of macros that always expand to an empty value and
are ment to be used inside optional blocks to control their visibility.
Optional blocks are ignored unless at least one macro inside of them is expanded to
a non-empty value or is a set flag macro.
" %[(%n)%] -- optional name of the tab
" %[ -- optional description of the view
" %[%T{tree}%] -- mark of tree mode
" %[{%c}%] -- description of custom view
" @ -- just an extra separator before the path
' %]
" %p:t -- tail part of view's location
set tablabel=%[(%n)%]%[%[%T{tree}%]%[{%c}%]@%]%p:t
'tabprefix'
type: string
default: "[%N:"
Determines prefix of a tab's label. Formatting is done as for 'tablabel' option.
'tabscope'
type: enumeration
default: global
Picks style of tabs, which defines what a single tab contains. Possible values:
- global - tab describes complete UI of two views and how they are arranged
- pane - tab is located "inside" a pane and manages it and quick view
'tabstop' 'ts'
type: integer
default: value from curses library
Number of spaces that a Tab in the file counts for.
'tabsuffix'
type: string
default: "]"
Determines suffix of a tab's label. Formatting is done as for 'tablabel' option.
'timefmt'
type: string
default: "%m/%d %H:%M"
Format of time in file list. See "man 1 date" or "man 3 strftime" for details.
'timeoutlen' 'tm'
type: integer
default: 1000
The time in milliseconds that is waited for a mapped key in case of already typed
key sequence is ambiguous.
'title'
type: boolean
default: true when title can be restored, false otherwise
When enabled, title of the terminal or terminal multiplexer's window is updated
according to current location. Because not all terminals support setting title,
this works only if `$TERM` value matches one of the following conditions:
- equals "xterm" or starts with "xterm-"
- equals "rxvt" or starts with "rxvt-"
- equals "screen" or starts with "screen-"
- equals "aterm"
- equals "Eterm"
'trash'
type: boolean
default: true
Use trash directory. See "Trash directory" section below.
'trashdir'
type: string
default: on *nix:
"%r/.vifm-Trash-%u,$VIFM/Trash,%r/.vifm-Trash"
or if $VIFM/Trash doesn't exist
"%r/.vifm-Trash-%u,$XDG_DATA_HOME/vifm/Trash,%r/.vifm-Trash"
on Windows:
"%r/.vifm-Trash,$XDG_DATA_HOME/vifm/Trash"
List of trash directory path specifications, separated with commas. Each list item
either defines an absolute path to trash directory or a path relative to a mount
point root when list element starts with "%r/". Value of the option can contain
environment variables (of form "$envname"), which will be expanded (prepend $ with
a slash to prevent expansion). Environment variables are expanded when the option
is set.
On *nix, if element ends with "%u", the mark is replaced with real user ID and
permissions are set so that only that only owner is able to use it.
Note that even this setup is not completely secure when combined with "%r/" and
it's overall safer to keep files in home directory, but that implies cost of
copying files between partitions.
When new file gets cut (deleted) vifm traverses each element of the option in the
order of their appearance and uses first trash directory that it was able to create
or that is already writable.
Default value tries to use trash directory per mount point and falls back to
~/.vifm/Trash on failure.
Will attempt to create the directory if it does not exist. See "Trash directory"
section below.
'tuioptions' 'to'
type: charset
default: "psv"
Each flag configures some aspect of TUI appearance. The flags are:
p - when included:
* file list inside a pane gets additional single character padding on left and
right sides;
* quick view and view mode get single character padding.
s - when included, left and right borders (side borders, hence "s" character) are
visible.
u - use Unicode characters in the TUI (Unicode ellipsis instead of "...").
v - vary width of middle border to equalize view sizes.
Each pane title contains the path of the listed directory. If too large, the path
is truncated on the left for the active pane and on the right for the other pane.
This can be modified with:
l - truncation is always on the left.
r - truncation is always on the right.
'undolevels' 'ul'
type: integer
default: 100
Maximum number of changes that can be undone. Note that here single file operation
is used as a unit, not operation, i.e. deletion of 101 files will exceed default
limit.
'vicmd'
type: string
default: "vim"
Command used to edit files in various contexts. Ampersand sign at the end
(regardless whether it's preceded by space or not) means backgrounding of command.
Background flag is ignored in certain context where vifm waits for the editor to
finish. Such contexts include any command that spawns editor to change list of
file names or a command, with :rename being one example. `-f` is also appended to
prevent forking in such cases, so the command needs to handle the flag.
Additionally `+{num}` and `+'call cursor()'` arguments are used to position cursor
when location is known.
'viewcolumns'
type: string
default: ""
scope: local
Format string containing list of columns in the view. When this option is empty,
view columns to show are chosen automatically using sorting keys (see 'sort') as a
base. Value of this option is ignored if 'lsview' is set. See "Column view"
section below for format description.
An example of setting the options for both panes (note :windo command):
windo set viewcolumns=-{name}..,6{size},11{perms}
'vixcmd'
type: string
default: value of 'vicmd'
Same as 'vicmd', but takes precedence over it when running inside a graphical
environment.
'vifminfo'
type: set
default: bookmarks,bmarks
Controls what will be saved in the $VIFM/vifminfo file.
bmarks - named bookmarks (see :bmark command)
bookmarks - marks, except special ones like '< and '>
tui - state of the user interface (sorting, number of windows, quick
view state, active view)
dhistory - directory history
state - file name and dot filters and terminal multiplexers integration
state
cs - primary color scheme
savedirs - save last visited directory
chistory - command line history
shistory - search history (/ and ? commands)
phistory - prompt history
fhistory - history of local filter (see description of the "=" normal mode
command)
dirstack - directory stack overwrites previous stack, unless stack of
current instance is empty
registers - registers content
tabs - global or pane tabs
options - all options that can be set with the :set command (obsolete)
filetypes - associated programs and viewers (obsolete)
commands - user defined commands (see :command description) (obsolete)
'vimhelp'
type: boolean
default: false
Use vim help format.
'wildmenu' 'wmnu'
type: boolean
default: false
Controls whether possible matches of completion will be shown above the command
line.
'wildstyle'
type: enumeration
default: bar
Picks presentation style of wild menu. Possible values:
- bar - one-line with left-to-right cursor
- popup - multi-line with top-to-bottom cursor
'wordchars'
type: string list
default: "1-8,14-31,33-255" (that is all non-whitespace characters)
Specifies which characters in command-line mode should be considered as part of a
word. Value of the option is comma-separated list of ranges. If both endpoints of
a range match, single endpoint is enough (e.g. "a" = "a-a"). Both endpoints are
inclusive. There are two accepted forms: character representing itself or number
encoding character according to ASCII table. In case of ambiguous characters
(dash, comma, digit) use numeric form. Accepted characters are in the range from 0
to 255. Any Unicode character with code greater than 255 is considered to be part
of a word.
The option affects Alt-D, Alt-B and Alt-F, but not Ctrl-W. This is intentionally
to allow two use cases:
- Moving by WORDS and deletion by words.
- Moving by words and deletion by WORDS.
To get the latter use the following mapping:
cnoremap <c-w> <a-b><a-d>
Also used for abbreviations.
'wrap' type: boolean
default: true
Controls whether to wrap text in quick view.
'wrapscan' 'ws'
type: boolean
default: true
Searches wrap around end of the list.
Mappings
Map arguments
LHS of mappings can be preceded by arguments which take the form of special sequences:
<silent>
Postpone UI updates until RHS is completely processed.
<wait> In case of builtin mapping causing conflict for a user-defined mapping (e.g., `t`
builtin to a partially typed `ta` user-defined mapping), ignore the builtin mapping
and wait for input indefinitely as opposed to default behaviour of triggering the
builtin mapping after a delay defined by 'timeoutlen'. Example:
nnoremap <wait> tw :set wrap!<cr>
nnoremap <wait> tn :set number!<cr>
nnoremap <wait> tr :set relativenumber!<cr>
Special sequences
Since it's not easy to enter special characters there are several special sequences that
can be used in place of them. They are:
<cr> Enter key.
<esc> Escape key.
<space>
Space key.
<lt> Less-than character (<).
<nop> provides a way to disable a mapping (by mapping it to <nop>).
<bs> Backspace key (see key conflict description below).
<tab> <s-tab>
Tabulation and Shift+Tabulation keys.
<home> <end>
Home/End.
<left> <right> <up> <down>
Arrow keys.
<pageup> <pagedown>
PageUp/PageDown.
<del> <delete>
Delete key. <del> and <delete> mean different codes, but <delete> is more common.
<insert>
Insert key.
<c-a>,<c-b>,...,<c-z>,<c-[>,<c->,<c-]>,<c-^>,<c-_>
Control + some key (see key conflict description below).
<c-@> only for *nix
Control + Space.
<a-a>,<a-b>,...,<a-z>
<m-a>,<m-b>,...,<m-z> Alt + some key.
<a-c-a>,<a-c-b>,...,<a-c-z>
<m-c-a>,<m-c-b>,...,<m-c-z> only for *nix
Alt + Ctrl + some key.
<f0> - <f63>
Functional keys.
<c-f1> - <c-f12>
only for MS-Windows
functional keys with Control key pressed.
<a-f1> - <a-f12>
only for MS-Windows
functional keys with Alt key pressed.
<s-f1> - <s-f12>
only for MS-Windows
functional keys with Shift key pressed.
Note that due to the way terminals process their input, several keyboard keys might be
mapped to single key code, for example:
- <cr> and <c-m>;
- <tab> and <c-i>;
- <c-h> and <bs>;
- etc.
Most of the time they are defined consistently and don't cause surprises, but <c-h> and
<bs> are treated differently in different environments (although they match each other all
the time), that's why they correspond to different keys in vifm. As a consequence, if you
map <c-h> or <bs> be sure to repeat the mapping with the other one so that it works in all
environments. Alternatively, provide your mapping in one form and add one of the
following:
" if mappings with <c-h> in the LHS work
map <c-h> <bs>
" if mappings with <bs> in the LHS work
map <bs> <c-h>
Whitespace
vifm removes whitespace characters at the beginning and end of commands. That's why you
may want to use <space> at the end of rhs in mappings. For example:
cmap <f1> man<space>
will put "man " in line when you hit the <f1> key in the command line mode.
Expression syntax
Supported expressions is a subset of what VimL provides.
Expression syntax summary, from least to most significant:
expr1 expr2
expr2 || expr2 .. logical OR
expr2 expr3
expr3 && expr3 .. logical AND
expr3 expr4
expr4 == expr4 equal
expr4 != expr4 not equal
expr4 > expr4 greater than
expr4 >= expr4 greater than or equal
expr4 < expr4 smaller than
expr4 <= expr4 smaller than or equal
expr4 expr5
expr5 + expr5 .. number addition
expr5 - expr5 .. number subtraction
expr5 expr6
expr6 . expr6 .. string concatenation
expr6 expr7
- expr6 unary minus
+ expr6 unary plus
! expr6 logical NOT
expr7 number number constant
"string" string constant, \ is special
'string' string constant, ' is doubled
&option option value
$VAR environment variable
v:var builtin variable
function(expr1, ...) function call
(expr1) nested expression
".." indicates that the operations in this level can be concatenated.
expr1
-----
expr2 || expr2
Arguments are converted to numbers before evaluation.
Result is non-zero if at least one of arguments is non-zero.
It's right associative and with short-circuiting, so sub-expressions are evaluated from
left to right until result of whole expression is determined (i.e., until first non-zero)
or end of the expression.
expr2
-----
expr3 && expr3
Arguments are converted to numbers before evaluation.
Result is non-zero only if both arguments are non-zero.
It's right associative and with short-circuiting, so sub-expressions are evaluated from
left to right until result of whole expression is determined (i.e., until first zero) or
end of the expression.
expr3
-----
expr4 {cmp} expr4
Compare two expr4 expressions, resulting in a 0 if it evaluates to false or 1 if it
evaluates to true.
equal ==
not equal !=
greater than >
greater than or equal >=
smaller than <
smaller than or equal <=
Examples:
'a' == 'a' == 1
'a' > 'b' == 1
'a' == 'b' == 0
'2' > 'b' == 0
2 > 'b' == 1
2 > '1b' == 1
2 > '9b' == 0
-1 == -'1' == 1
0 == '--1' == 1
expr4
-----
expr5 + expr5 .. number addition expr5 - expr5 .. number subtraction
Examples:
1 + 3 - 3 == 1
1 + '2' == 3
expr5
-----
expr6 . expr6 .. string concatenation
Examples:
'a' . 'b' == 'ab'
'aaa' . '' . 'c' == 'aaac'
expr6
-----
- expr6 unary minus
+ expr6 unary plus
! expr6 logical NOT
For '-' the sign of the number is changed.
For '+' the number is unchanged.
For '!' non-zero becomes zero, zero becomes one.
A String will be converted to a Number first.
These operations can be repeated and mixed. Examples:
--9 == 9
---9 == -9
-+9 == 9
!-9 == 0
!'' == 1
!'x' == 0
!!9 == 1
expr7
-----
number number constant
-----
Decimal number. Examples:
0 == 0
0000 == 0
01 == 1
123 == 123
10000 == 10000
string
------
"string" string constant
Note that double quotes are used.
A string constant accepts these special characters:
\b backspace <bs>
\e escape <esc>
\n newline
\r return <cr>
\t tab <tab>
\\ backslash
\" double quote
Examples:
"\"Hello,\tWorld!\""
"Hi,\nthere!"
literal-string
--------------
'string' string constant
Note that single quotes are used.
This string is taken as it is. No backslashes are removed or have a special meaning. The
only exception is that two quotes stand for one quote.
Examples:
'All\slashes\are\saved.'
'This string contains doubled single quotes ''here'''
option
------
&option option value (local one is preferred, if exists) &g:option
global option value &l:option local option value
Examples:
echo 'Terminal size: '.&columns.'x'.&lines
if &columns > 100
Any valid option name can be used here (note that "all" in ":set all" is a pseudo option).
See ":set options" section above.
environment variable
--------------------
$VAR environment variable
The String value of any environment variable. When it is not defined, the result is an
empty string.
Examples:
'This is my $PATH env: ' . $PATH
'vifmrc at ' . $MYVIFMRC . ' is used.'
builtin variable
--------------------
v:var builtin variable
Information exposed by vifm for use in scripting.
v:count
count passed to : command, 0 by default. Can be used in mappings to passthe count to a
different command.
v:count1
same as v:count, but 1 by default.
v:jobcount
number of active jobs (as can be seen in the :jobs menu).
v:session
name of the current session or empty string.
v:servername
See below.
function call
-------------
function(expr1, ...) function call
See "Functions" section below.
Examples:
"'" . filetype('.') . "'"
filetype('.') == 'reg'
expression nesting
------------------
(expr1) nested expression
Groups any other expression of arbitrary complexity enforcing order in which operators are
applied.
Functions
USAGE RESULT DESCRIPTION
chooseopt({opt}) String Queries choose parameters passed on startup.
executable({expr}) Integer Checks whether {expr} command available.
expand({expr}) String Expands special keywords in {expr}.
extcached({cache}, {path}, {extcmd})
String Caches output of {extcmd} per {cache} and
{path} combination.
filetype({fnum} [, {resolve}])
String Returns file type from position.
fnameescape({expr}) String Escapes {expr} for use in a :command.
getpanetype() String Returns type of current pane.
has({property}) Integer Checks whether instance has {property}.
layoutis({type}) Integer Checks whether layout is of type {type}.
paneisat({loc}) Integer Checks whether current pane is at {loc}.
system({command}) String Executes shell command and returns its output.
tabpagenr([{arg}]) Integer Returns number of current or last tab.
term({command}) String Like system(), but for interactive commands.
chooseopt({opt})
Retrieves values of options related to file choosing. {opt} can be one of:
files returns argument of --choose-files or empty string
dir returns argument of --choose-dir or empty string
cmd returns argument of --on-choose or empty string
delimiter returns argument of --delimiter or the default one (\n)
executable({expr})
If {expr} is absolute or relative path, checks whether path destination exists and refers
to an executable, otherwise checks whether command named {expr} is present in directories
listed in $PATH. Checks for various executable extensions on Windows. Returns boolean
value describing result of the check.
Example:
" use custom default viewer script if it's available and installed
" in predefined system directory, otherwise try to find it elsewhere
if executable('/usr/local/bin/defviewer')
fileview * /usr/local/bin/defviewer %c
else
if executable('defviewer')
fileview * defviewer %c
endif
endif
expand({expr})
Expands environment variables and macros in {expr} just like it's done for command-line
commands. Returns a string. See "Command macros" section above.
Examples:
" percent sign
:echo expand('%%')
" the last part of directory name of the other pane
:echo expand('%D:t')
" $PATH environment variable (same as `:echo $PATH`)
:echo expand('$PATH')
extcached({cache}, {path}, {extcmd})
Caches value of {extcmd} external command automatically updating it as necessary based on
monitoring change date of a {path}. The cache is invalidated when file or its meta-data
is updated. A single path can have multiple caches associated with it.
{path} value is normalized, but symbolic links in it aren't resolved.
Example:
" display number and size of blocks actually used by a file or directory
set statusline+=" Uses: %{ extcached('uses',
expand('%c'),
expand('stat --format=%%bx%%B %c')) }"
filetype({fnum} [, {resolve}])
The result is a string, which represents file type and is one of the list:
exe executables
reg regular files
link symbolic links
broken broken symbolic links (appears only when resolving)
dir directories
char character devices
block block devices
fifo pipes
sock *nix domain sockets
? unknown file type (should not normally happen) or
non-file (pseudo-entries in compare view)
The result can also be an empty string in case of invalid argument.
Parameter {fnum} can have following values:
- '.' to get type of file under the cursor in the active pane
- numerical value base 1 to get type of file on specified line number
Optional parameter {resolve} is treated as a boolean and specifies whether symbolic links
should be resolved.
fnameescape({expr})
Escapes parameter to make it suitable for use as an argument of a :command. List of
escaped characters includes %, which is doubled.
Usage example:
" navigate to most recently modified file in current directory
execute 'goto' fnameescape(system('ls -t | head -1'))
getpanetype()
Retrieves string describing type of current pane. Possible return values:
regular regular file listing of some directory
custom custom file list (%u)
very-custom very custom file list (%U)
tree tree view
has({property})
Allows examining internal parameters from scripts to e.g. figure out environment in which
application is running. Returns 1 if property is true/present, otherwise 0 is returned.
Currently the following properties are supported (anything else will yield 0):
unix runs in *nix-like environment (including Cygwin)
win runs on Windows
Usage example:
" skip user/group on Windows
if !has('win')
let $RIGHTS = '%10u:%-7g '
endif
execute 'set' 'statusline=" %t%= %A '.$RIGHTS.'%15E %20d "'
layoutis({type})
Checks whether current interface layout is {type} or not, where {type} can be:
only single-pane mode
split double-pane mode (either vertical or horizontal split)
vsplit vertical split (left and right panes)
hsplit horizontal split (top and bottom panes)
Usage example:
" automatically split vertically before enabling preview
:nnoremap w :if layoutis('only') | vsplit | endif | view!<cr>
paneisat({loc})
Checks whether position of active pane in current layout matches one of the following
locations:
top pane reaches top border
bottom pane reaches bottom border
left pane reaches left border
right pane reaches right border
system({command})
Runs the command in shell and returns its output (joined standard output and standard
error streams). All trailing newline characters are stripped to allow easy appending to
command output. Ctrl-C should interrupt the command.
Use this function to consume output of external commands that don't require user
interaction and term() for interactive commands that make use of terminal and are capable
of handling stream redirection.
Usage example:
" command to enter .git/ directory of git-repository (when ran inside one)
command! cdgit :execute 'cd' fnameescape(system('git rev-parse --git-dir'))
tabpagenr([{arg}])
When called without arguments returns number of current tab page base one.
When called with "$" as an argument returns number of the last tab page base one, which is
the same as number of tabs.
term({command})
Same as system() function, but user interface is shutdown during the execution of the
command, which makes sure that external interactive applications won't affect the way
terminal is used by vifm.
Usage example:
" command to change directory by picking it via fzf
command! fzfcd :execute 'cd'
fnameescape(term('find -type d | fzf 2> /dev/tty'))
Menus and dialogs
When navigating to some path from a menu there is a difference in end location depending
on whether path has trailing slash or not. Files normally don't have trailing slashes so
"file/" won't work and one can only navigate to a file anyway. On the other hand with
directories there are two options: navigate to a directory or inside of it. To allow both
use cases, the first one is used on paths like "dir" and the second one for "dir/".
Commands
:range navigate to a menu line.
:exi[t][!] :q[uit][!] :x[it][!]
leave menu mode.
:noh[lsearch]
reset search match highlighting.
:w[rite] {dest}
write all menu lines into file specified by {dest}.
General
j, Ctrl-N - move down.
k, Ctrl-P - move up.
Enter, l - select and exit the menu.
Ctrl-L - redraw the menu.
Escape, Ctrl-C, ZZ, ZQ, q - quit.
In all menus
The following set of keys has the same meaning as in normal mode.
Ctrl-B, Ctrl-F
Ctrl-D, Ctrl-U
Ctrl-E, Ctrl-Y
/, ?
n, N
[count]G, [count]gg
H, M, L
zb, zt, zz
zh - scroll menu items [count] characters to the right.
zl - scroll menu items [count] characters to the left.
zH - scroll menu items half of screen width characters to the right.
zL - scroll menu items half of screen width characters to the left.
: - enter command line mode for menus (currently only :exi[t], :q[uit], :x[it] and
:{range} are supported).
b - interpret content of the menu as list of paths and use it to create custom view in
place of previously active pane. See "Custom views" section below.
B - same as above, but creates unsorted view.
v - load menu content into quickfix list of the editor (Vim compatible by assumption) or
if list doesn't have separators after file names (colons) open each line as a file name.
Below is description of additional commands and reaction on selection in some menus and
dialogs.
Apropos menu
Selecting menu item runs man on a given topic. Menu won't be closed automatically to
allow view several pages one by one.
Command-line mode abbreviations menu
Type dd on an abbreviation to remove it.
c leaves menu preserving file selection and inserts right-hand side of selected command
into command-line.
Color scheme menu
Selecting name of a color scheme applies it the same way as if ":colorscheme <name>" was
executed on the command-line.
Commands menu
Selecting command executes it with empty arguments (%a).
dd on a command to remove.
Marks menu
Selecting mark navigates to it.
dd on a mark to remove it.
Bookmarks menu
Selecting a bookmark navigates to it.
Type dd on a bookmark to remove it.
gf and e also work to make it more convenient to bookmark files.
Trash (:lstrash) menu
r on a file name to restore it from trash.
dd deletes file under the cursor.
Trashes (:trashes) menu
dd empties selected trash in background.
Directory history and Trashes menus
Selecting directory name will change directory of the current view as if :cd command was
used.
Directory stack menu
Selecting directory name will rotate stack to put selected directory pair at the top of
the stack.
File (:file) menu
Commands from vifmrc or typed in command-line are displayed above empty line. All
commands below empty line are from .desktop files.
c leaves menu preserving file selection and inserts command after :! in command-line mode.
Grep, find, locate, bookmarks and user menu with navigation (%M macro)
gf - navigate previously active view to currently selected item. Leaves menu mode except
for grep menu. Pressing Enter key has the same effect.
e - open selected path in the editor, stays in menu mode.
c - leave menu preserving file selection and insert file name after :! in command-line
mode.
User menu without navigation (%m macro)
c leaves menu preserving file selection and inserts whole line after :! in command-line
mode.
Grep menu
Selecting file (via Enter or l key) opens it in editor set by 'vicmd' at given line
number. Menu won't be closed automatically to allow viewing more than one result.
See above for "gf" and "e" keys description.
Command-line history menu
Selecting an item executes it as command-line command, search query or local filter.
c leaves menu preserving file selection and inserts line into command-line of appropriate
kind.
Volumes menu
Selecting a drive navigates previously active pane to the root of that drive.
Fileinfo dialog
Enter, q - close dialog
Sort dialog
h, Space - switch ascending/descending.
q - close dialog
One shortcut per sorting key (see the dialog).
Attributes (permissions or properties) dialog
h, Space - check/uncheck.
q - close dialog
r - (*nix only) (un)set all read bits
w - (*nix only) (un)set all write bits
x - (*nix only) (un)set all execute bits
s - (*nix only) (un)set all special (SetUID, SetGID, Sticky) bits
e - (*nix only) (un)set recursion (for directories only)
Item states:
- * - checked flag.
- X - means that it has different value for files in selection.
- d (*nix only) - (only for execute flags) means u-x+X, g-x+X or o-x+X argument for the
chmod program. If you're not on OS X and want to remove execute permission bit from all
files, but preserve it for directories, set all execute flags to 'd' and check 'Set
Recursively' flag.
Jobs menu
dd requests cancellation of job under cursor. The job won't be removed from the list, but
marked as being cancelled (if cancellation was successfully requested). A message will
pop up if the job has already stopped. Note that on Windows cancelling external programs
like this might not work, because their parent shell doesn't have any windows.
e key displays errors of selected job if any were collected. They are displayed in a new
menu, but you can get back to jobs menu by pressing h.
Undolist menu
r - reset undo position to group under the cursor.
Media menu
Selecting a device either mounts (if it wasn't mounted yet) or navigates to its first
mount point.
Selecting a mount point navigates to it.
Selecting "not mounted" line causes mounting.
Selecting any other line does nothing.
r - reload the list.
m - mount/unmount device (cursor should be positioned on lines under device information).
[ - put cursor on the previous device.
] - put cursor on the next device.
Plugins menu
e - display log messages of selected plugin if any were collected. They are displayed in
a new menu, but you can get back to plugins menu by pressing h.
gf - navigate previously active view to the location of selected plugin. Leaves menu
mode.
Custom views
Definition
Normally file views contain list of files from a single directory, but sometimes it's
useful to populate them with list of files that do not belong to the same directory, which
is what custom views are for.
Presentation
Custom views are still related to directory they were in before custom list was loaded.
Path to that directory (original directory) can be seen in the title of a custom view.
Files in same directory have to be named differently, this doesn't hold for custom views
thus seeing just file names might be rather confusing. In order to give an idea where
files come from and when possible, relative paths to original directory of the view is
displayed, otherwise full path is used instead.
Custom views normally don't contain any inexistent files.
Navigation
Custom views have some differences related to navigation in regular views.
gf - acts similar to gf on symbolic links and navigates to the file at its real
location.
h - go to closes parent node in tree view, otherwise return to the original directory.
gh - return to the original directory.
Opening ".." entry also causes return to the original directory.
History
Custom list exists only while it's visible, once left one can't return to it, so there is
no appearances of it in any history.
Filters
Only local filter affects content of the view. This is intentional, presumably if one
loads list, precisely that list should be displayed (except for inexistent paths, which
are ignored).
Search
Although directory names are visible in listing, they are not searchable. Only file names
are taken into account (might be changed in future, searching whole lines seems quite
reasonable).
Sorting
Contrary to search sorting by name works on whole visible part of file path.
Highlight
Whole file name is highlighted as one entity, even if there are directory elements.
Updates
Reloads can occur, though they are not automatic due to files being scattered among
different places. On a reload, inexistent files are removed and meta-data of all other
files is updated.
Once custom view forgets about the file, it won't add it back even if it's created again.
So not seeing file previously affected by an operation, which was undone is normal.
Operations
All operations that add files are forbidden for custom views. For example,
moving/copying/putting files into a custom view doesn't work, because it doesn't make much
sense.
On the other hand, operations that use files of a custom view as a source (e.g. yanking,
copying, moving file from custom view, deletion) and operations that modify names are all
allowed.
Compare views
Kinds
:compare can produce four different results depending on arguments:
- single compare view (ofone and either listall or listdups);
- single custom view (ofone and listunique);
- two compare views (ofboth and either listall or listdups);
- two custom views (ofboth and listunique).
The first two display files of one file system tree. Here duplicates are files that have
at least one copy in the same tree. The other two kinds of operation compare two trees,
in which duplicates are files that are found in both trees.
Lists of unique files are presented in custom views because there is no file grouping to
preserve as all file ids are guaranteed to be distinct.
Creation
Arguments passed to :compare form four categories each with its own prefix and is
responsible for particular property of operation.
Which files to compare:
- ofboth - compares files of two panes against each other;
- ofone - compares files of the same directory.
How files are compared:
- byname - by their name only;
- bysize - only by their size;
- bycontents - by data they contain (combination of size and hash of small chunk of
contents is used as first approximation, so don't worry too much about large files).
Which files to display:
- listall - all files;
- listunique - unique files only;
- listdups - only duplicated files.
How results are grouped (has no effect if "ofone" specified):
- groupids - files considered identical are always adjacent in output;
- grouppaths - file system ordering is preferred (this also enables displaying
identically named files as mismatches).
Which files to omit:
- skipempty - ignore empty files.
Each argument can appear multiple times, the rightmost one of the group is considered.
Arguments alter default behaviour instead of substituting it.
Examples
The defaults corresponds to probably the most common use case of comparing files in two
trees with grouping by paths, so the following are equivalent:
:compare
:compare bycontents grouppaths
:compare bycontents listall ofboth grouppaths
Another use case is to find duplicates in the current sub-tree:
:compare listdups ofone
The following command lists files that are unique to each pane:
:compare listunique
Look
The view can't switch to ls-like view as it's unable to display diff-like data.
Comparison views have second column displaying id of the file, files with same id are
considered to be equal. The view columns configuration is predefined.
Behaviour
When two views are being compared against each other the following changes to the regular
behaviour apply:
- views are scrolled synchronously (as if 'scrollbind' was set);
- views' cursors are synchronized;
- local filtering is disabled (its results wouldn't be meaningful);
- zd excludes groups of adjacent identical files, 1zd gives usual behaviour;
- sorting is permanently disabled (ordering is fixed);
- removed files hide their counter pairs;
- exiting one of the views terminates the other immediately;
- renaming files isn't blocked, but isn't taken into account and might require
regeneration of comparison;
- entries which indicate absence of equivalent file have empty names and can be matched
as such;
- when unique files of both views are listed custom views can be empty, this absence of
unique files is stated clearly.
One compare view has similar properties (those that are applicable for single pane).
Files are gathered in this way:
- recursively starting at current location of the view;
- dot files are excluded if view hides them at the moment of comparison, file name
filters are obeyed as well so you end up comparing what you see;
- directories are not taken into account;
- symbolic links to directories are ignored.
Startup
On startup vifm determines several variables that are used during execution. They are
determined in the order they appear below.
On *nix systems $HOME is normally present and used as is. On Windows systems vifm tries
to find correct home directory in the following order:
- $HOME variable;
- $USERPROFILE variable (on Windows only);
- a combination of $HOMEDRIVE and $HOMEPATH variables (on Windows only).
vifm tries to find correct configuration directory by checking the following places:
- $VIFM variable;
- parent directory of the executable file (on Windows only);
- $HOME/.vifm directory;
- $APPDATA/Vifm directory (on Windows only);
- $XDG_CONFIG_HOME/vifm directory;
- $HOME/.config/vifm directory.
vifm tries to find correct configuration file by checking the following places:
- $MYVIFMRC variable;
- vifmrc in parent directory of the executable file (on Windows only);
- $VIFM/vifmrc file.
Configure
See "Startup" section above for the explanations on $VIFM and $MYVIFMRC.
The vifmrc file contains commands that will be executed on vifm startup. There are two
such files: global and local. Global one is at {prefix}/etc/vifm/vifmrc, see $MYVIFMRC
variable description for the search algorithm used to find local vifmrc. Global vifmrc is
loaded before the local one, so that the later one can redefine anything configured
globally.
Use vifmrc to set settings, mappings, filetypes etc. To use multi line commands precede
each next line with a slash (whitespace before slash is ignored, but all spaces at the end
of the lines are saved). For example:
set
\smartcase
equals "setsmartcase". When
set<space here>
\ smartcase
equals "set smartcase".
The $VIFM/vifminfo file contains generic state of the application. You can control what
is stored in vifminfo by setting 'vifminfo' option. Vifm always writes this file on exit
unless 'vifminfo' option is empty. Marks, bookmarks, commands, histories, filetypes,
fileviewers and registers in the file are merged with vifm configuration (which has bigger
priority).
Generally, runtime configuration has bigger priority during merging, but there are some
exceptions:
- directory stack stored in the file is not overwritten unless something is changed in
vifm instance that performs merge;
- each mark or bookmark is marked with a timestamp, so that newer value is not
overwritten by older one, thus no matter from where it comes, the newer one wins;
- all histories are marked with timestamps on storing, this means that last instance to
quit puts its elements on top of the list;
- tabs are merged only if both current instance and stored state contain exactly one tab
of any kind.
The $VIFM/scripts directory can contain shell scripts. vifm modifies its PATH environment
variable to let user run those scripts without specifying full path. All subdirectories
of the $VIFM/scripts will be added to PATH too. Script in a subdirectory overlaps script
with the same name in all its parent directories.
The $VIFM/colors/ and {prefix}/etc/vifm/colors/ directories contain color schemes.
Available color schemes are searched in that order, so on name conflict the one in
$VIFM/colors/ wins.
Each color scheme should have ".vifm" extension. This wasn't the case before and for this
reason the following rules apply during lookup:
- if there is no file with .vifm extension, all regular files are listed;
- otherwise only files with .vifm extension are listed (with the extension being
truncated).
Sessions
Sessions provide a way to have multiple persistent runtime configurations. Think of them
as second-level vifminfo files in addition to the first-level one used by all sessions.
In other words, they aren't a replacement for vifminfo file that exists without sessions,
but an addition to it. One can empty 'vifminfo' option and rely solely on sessions, but
in practice one might want to share some state among instances in different sessions or
have an "out-of-sessions" state for tasks that don't deserve a session of their own.
This leads to a two-level structure where data in session files has higher priority than
data in vifminfo files (where this makes sense) following the same rules that merging of
vifminfo file obeys. In addition to that, history items from session files are never
ordered before history items from vifminfo file.
Format
Sessions have the format of vifminfo files, they do not consist of sequence of command-
line commands and are not meant to be sourced via :source command.
Storage and naming
`$VIFM/sessions/` directory serves as a storage for sessions. Consequently names should
be valid filenames. The structure of the storage is flat meaning that there are no
subdirectories, that's why names of sessions can't contain slashes.
Usage model
Contrary to Vim, vifm automates basic management of sessions. You can start, switch, stop
or delete a session using builtin means.
Current session is saved at the same time vifminfo is saved (on normal exits or explicitly
on :write command) and right before switching to another session. To avoid saving in
those cases use :session command to detach (without saving) from a session before
proceeding.
Related topics
Commands: :session, :delsession
Options: 'sessionoptions'
Variables: v:session
Automatic FUSE mounts
vifm has a builtin support of automated FUSE file system mounts. It is implemented using
file associations mechanism. To enable automated mounts, one needs to use a specially
formatted program line in filetype or filextype commands. These use special macros, which
differ from macros in commands unrelated to FUSE. Currently three formats are supported:
1) FUSE_MOUNT This format should be used in case when all information needed for mounting
all files of a particular type is the same. E.g. mounting of tar files don't require any
file specific options.
Format line:
FUSE_MOUNT|mounter %SOURCE_FILE %DESTINATION_DIR [%FOREGROUND]
Example filetype command:
:filetype FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR
2) FUSE_MOUNT2 This format allows one to use specially formatted files to perform mounting
and is useful for mounting remotes, for example remote file systems over ftp or ssh.
Format line:
FUSE_MOUNT2|mounter %PARAM %DESTINATION_DIR [%FOREGROUND]
Example filetype command:
:filetype *.ssh FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR
Example file content:
root@127.0.0.1:/
3) FUSE_MOUNT3
This format is equivalent to FUSE_MOUNT, but omits unmounting. It is useful for cases,
when unmounting isn't needed, like when using AVFS.
Example :filetype command:
:filetype *.tar,*.tar.bz2,*.tbz2,*.tgz,*.tar.gz,*.tar.xz,*.txz,*.deb
\ {Mount with avfs}
\ FUSE_MOUNT3|mount-avfs %DESTINATION_DIR %SOURCE_FILE
Example `mount-avfs` helper script:
#!/bin/sh
dest=$1
file=$2
rmdir "$dest"
ln -s "$HOME/.avfs$file#/" "$dest"
All % macros are expanded by vifm at runtime and have the following meaning:
- %SOURCE_FILE is replaced by full path to selected file;
- %DESTINATION_DIR is replaced by full path to mount directory, which is created by vifm
basing on the value of 'fusehome' option;
- %PARAM value is filled from the first line of file (whole line), though in the future
it can be changed to whole file content;
- %FOREGROUND means that you want to run mount command as a regular command (required to
be able to provide input for communication with mounter in interactive way).
%FOREGROUND is an optional macro. Other macros are not mandatory, but mount commands
likely won't work without them.
%CLEAR is obsolete name of %FOREGROUND, which is still supported, but might be removed in
future. Its use is discouraged.
Unlike macros elsewhere, these are recognized only if they appear at the end of a command
or are followed by a space. There is no way to escape % either. These are historical
limitations, which might be addressed in the future.
The mounted FUSE file systems will be automatically unmounted in two cases:
- when vifm quits (with ZZ, :q, etc. or when killed by signal);
- when you explicitly leave mount point going up to its parent directory (with h, Enter
on "../" or ":cd ..") and other pane is not in the same directory or its child
directories.
View look
vifm supports displaying of file list view in two different ways:
- in a table mode, when multiple columns can be set using 'viewcolumns' option (see
"Column view" section below for details);
- in a multicolumn list manner which looks almost like `ls -x` command output (see "ls-
like view" section below for details).
The look is local for each view and can be chosen by changing value of the 'lsview'
boolean option.
Depending on view look some of keys change their meaning to allow more natural cursor
moving. This concerns mainly h, j, k, l and other similar navigation keys.
Also some of options can be ignored if they don't affect view displaying in selected look.
For example value of 'viewcolumns' when 'lsview' is set.
ls-like view
When this view look is enabled by setting 'lsview' option on, vifm will display files in
multiple columns. Number of columns depends on the length of the longest file name
present in current directory of the view. Whole file list is automatically reflowed on
directory change, terminal or view resize.
View looks close to output of `ls -x` command, so files are listed left to right in rows.
In this mode file manipulation commands (e.g. d) don't work line-wise like they do in Vim,
since such operations would be uncommon for file manipulation tasks. Thus, for example,
dd will remove only current file.
By default the view is filled by lines, 'lsoptions' can be used to get filling by columns.
Note that tree-view and compare view inhibit ls-like view.
Column view
View columns are described by a comma-separated list of column descriptions, each of which
has the following format
[ '-' | '*' ] [ fw ( [ '.' tw ] | '%' ) ] '{' type | literal '}' '.'{0,3}
where fw stands for full width, tw stands for text width, bar is logical or, square
brackets denote optional parts and curly braces define range of repetitions for a symbol
that precedes them.
So it basically consists of four parts:
1. Optional alignment specifier
2. Optional width specifier
3. Mandatory column name
4. Optional cropping specifier
Alignment specifier
It's an optional minus or asterisk sign as the first symbol of the string.
Specifies type of text alignment within a column. Three types are supported:
- left align
set viewcolumns=-{name}
- right align (default)
set viewcolumns={name}
- dynamic align
It's like left alignment, but when the text is bigger than the column, the alignment is
made at the right (so the part of the field is always visible).
set viewcolumns=*{name}
Width specifier
It's a number followed by a percent sign, two numbers (second one should be less than or
equal to the first one) separated with a dot or a single number.
Specifies column width and its units. There are three size types:
- absolute size - column width is specified in characters
set viewcolumns=-100{name},20.15{ext}
results in two columns with lengths of 100 and 20 and a reserved space of five
characters on the left of second column.
- relative (percent) size - column width is specified in percents of view width
set viewcolumns=-80%{name},15%{ext},5%{mtime}
results in three columns with lengths of 80/100, 15/100 and 5/100 of view width.
- auto size (default) - column width is automatically determined
set viewcolumns=-{name},{ext},{mtime}
results in three columns with length of one third of view width. There is no size
adjustment to content, since it will slow down rendering.
Columns of different sizing types can be freely mixed in one view. Though sometimes some
of columns can be seen partly or be completely invisible if there is not enough space to
display them.
Column contents
This is usually a sorting key surrounded with curly braces, e.g.
{name},{ext},{mtime}
{name} and {iname} types are the same and present both for consistency with 'sort' option.
Following types don't have corresponding sorting keys:
- {root} - display name without extension (as a complement for {ext})
- {fileroot} - display name without extension for anything except for directories and
symbolic links to directories (as a complement for {fileext})
Empty curly braces ({}) are replaced with the default secondary column for primary sort
key. So after the next command view will be displayed almost as if 'viewcolumns' is empty,
but adding ellipsis for long file names:
set viewcolumns=-{name}..,6{}.
The last kind of column value is a string literal. The literal is used as a column value
for every row. The syntax is "{#literal}", for example:
3{#},{#|},{# | }
This can be used to draw column separators. Mind that for convenience literals have
different defaults: truncation and automatically determined absolute size, which is what
you usually want for them. Example:
set viewcolumns=*{name}..,{#|},6{}.
Cropping specifier
It's from one to three dots after closing curly brace in column format.
Specifies type of text truncation if it doesn't fit in the column. Currently three types
are supported:
- truncation - text is truncated
set viewcolumns=-{name}.
results in truncation of names that are too long too fit in the view.
- adding of ellipsis - ellipsis on the left or right are added when needed
set viewcolumns=-{name}..
results in that ellipsis are added at the end of too long file names.
- none (default) - text can pass column boundaries
set viewcolumns=-{name}...,{ext}
results in that long file names can partially be written on the ext column.
Color schemes
The color schemes in vifm can be applied in two different ways:
- as the primary color scheme;
- as local to a pane color scheme.
Both types are set using :colorscheme command, but of different forms:
- :colorscheme color_scheme_name - for the primary color scheme;
- :colorscheme color_scheme_name directory - for local color schemes.
Look of different parts of the TUI (Text User Interface) is determined in this way:
- Border, TabLine, TabLineSel, TopLineSel, TopLine, CmdLine, ErrorMsg, StatusLine,
JobLine, SuggestBox and WildMenu are always determined by the primary color scheme;
- CurrLine, Selected, Directory, Link, BrokenLink, Socket, Device, Executable, Fifo,
CmpMismatch, Win, AuxWin and OtherWin are determined by primary color scheme and a set
of local color schemes, which can be empty.
There might be a set of local color schemes because they are structured hierarchically
according to file system structure. For example, having the following piece of file
system:
~
`-- bin
|
`-- my
Two color schemes:
# ~/.vifm/colors/for_bin
highlight Win cterm=none ctermfg=white ctermbg=red
highlight CurrLine cterm=none ctermfg=red ctermbg=black
# ~/.vifm/colors/for_bin_my
highlight CurrLine cterm=none ctermfg=green ctermbg=black
And these three commands in the vifmrc file:
colorscheme Default
colorscheme for_bin ~/bin
colorscheme for_bin_my ~/bin/my
File list will look in the following way for each level:
- ~/ - Default color scheme
black background
cursor with blue background
- ~/bin/ - mix of Default and for_bin color schemes
red background
cursor with black background and red foreground
- ~/bin/my/ - mix of Default, for_bin and for_bin_my color schemes
red background
cursor with black background and green foreground
Trash directory
vifm has support of trash directory, which is used as temporary storage for deleted files
or files that were cut. Using trash is controlled by the 'trash' option, and exact path
to the trash can be set with 'trashdir' option. Trash directory in vifm differs from the
system-wide one by default, because of possible incompatibilities of storing deleted files
among different file managers. But one can set 'trashdir' to "~/.local/share/Trash" to
use a "standard" trash directory.
There are two scenarios of using trash in vifm:
1. As a place for storing files that were cut by "d" and may be inserted to some other
place in file system.
2. As a storage of files, that are deleted but not purged yet.
The first scenario uses deletion ("d") operations to put files to trash and put ("p")
operations to restore files from trash directory. Note that such operations move files to
and from trash directory, which can be long term operations in case of different
partitions or remote drives mounted locally.
The second scenario uses deletion ("d") operations for moving files to trash directory and
:empty command-line command to purge all previously deleted files.
Deletion and put operations depend on registers, which can point to files in trash
directory. Normally, there are no nonexistent files in registers, but vifm doesn't keep
track of modifications under trash directory, so one shouldn't expect value of registers
to be absolutely correct if trash directory was modified not by operation that are meant
for it. But this won't lead to any issues with operations, since they ignore nonexistent
files.
Client-Server
vifm supports remote execution of command-line mode commands, remote changing of
directories and expression evaluation. This is possible using --remote and --remote-expr
command-line arguments.
To execute a command remotely combine --remote argument with -c <command> or +<command>.
For example:
vifm --remote -c 'cd /'
vifm --remote '+cd /'
To change directory not using command-line mode commands one can specify paths right after
--remote argument, like this:
vifm --remote /
vifm --remote ~
vifm --remote /usr/bin /tmp
Evaluating expression remotely might be useful to query information about an instance, for
example its location:
vifm --remote-expr 'expand("%d")'
If there are several running instances, the target can be specified with --server-name
option (otherwise, the first one lexicographically is used):
vifm --server-name work --remote ~/work/project
List of names of running instances can be obtained via --server-list option. Name of the
current one is available via v:servername.
v:servername
server name of the running vifm instance. Empty if client-server feature is
disabled.
External Renaming
When an editor is run to edit list of file names, contents of the temporary file has the
following format:
1. Order of lines correspond to the order of files in a view.
2. Lines that start with a "#" are comments and are ignored.
3. Single backslash at the beginning of a line is ignored, so that a file starting with
a backslash will appear like "\#name".
If an operation was rejected due to issues with file names, next time you'll see the
following in this order:
1. Last error (in comments).
2. Original file names (in comments).
3. Failed list of new names.
Mind that Vim plugin will extract list of original names and show them in a vertical
split.
You can cancel renaming by removing all non-comments from the buffer. This also erases
information about previous edits.
Plugin
Plugin for using vifm in vim as a file selector.
Commands:
:EditVifm select a file or files to open in the current buffer.
:Vifm alias for :EditVifm.
:SplitVifm split buffer and select a file or files to open.
:VsplitVifm vertically split buffer and select a file or files to open.
:DiffVifm select a file or files to compare to the current file with
:vert diffsplit.
:TabVifm select a file or files to open in tabs.
Each command accepts up to two arguments: left pane directory and right pane directory.
After arguments are checked, vifm process is spawned in a special "file-picker" mode. To
pick files just open them either by pressing l, i or Enter keys, or by running :edit
command. If no files are selected, file under the cursor is opened, otherwise whole
selection is passed to the plugin and opened in vim.
The plugin have only two settings. It's a string variable named g:vifm_term to let user
specify command to run GUI terminal. By default it's equal to 'xterm -e'. And another
string variable named g:vifm_exec, which equals "vifm" by default and specifies path to
vifm's executable. To pass arguments to vifm use g:vifm_exec_args, which is empty by
default.
To use the plugin copy the vifm.vim file to either the system wide vim/plugin directory or
into ~/.vim/plugin.
If you would prefer not to use the plugin and it is in the system wide plugin directory
add
let loaded_vifm=1
to your ~/.vimrc file.
Reserved
The following command names are reserved and shouldn't be used for user commands.
g[lobal]
v[global]
ENVIRONMENT
VIFM Points to main configuration directory (usually ~/.vifm/).
MYVIFMRC
Points to main configuration file (usually ~/.vifm/vifmrc).
These environment variables are valid inside vifm and also can be used to configure it by
setting some of them before running vifm.
When $MYVIFMRC isn't set, it's made as $VIFM/vifmrc (exception for Windows: vifmrc in the
same directory as vifm.exe has higher priority than $VIFM/vifmrc).
See "Startup" section above for more details.
VIFM_FUSE_FILE
On execution of external commands this variable is set to the full path of file
used to initiate FUSE mount of the closest mount point from current pane's
directory up. It's not set when outside FUSE mount point. When vifm is used
inside terminal multiplexer, it tries to set this variable as well (it doesn't work
this way on its own).
SEE ALSO
vifm-convert-dircolors(1), vifm-pause(1)
Website: https://vifm.info/
Wiki: https://wiki.vifm.info/
Esperanto translation of the documentation by Sebastian Cyprych:
http://cyprych.neostrada.pl/tekstoj/komputiloj/vifm-help.eo.html
AUTHOR
Vifm was written by ksteen <ksteen@users.sourceforge.net>
And currently is developed by xaizek <xaizek@posteo.net>