NAME

       Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Brightness
       Set the initial brightness  Optional. Type integer.

       upstream_default value :
           1000

   Contrast
       Set the initial contrast  Optional. Type integer.

       upstream_default value :
           560

   Device
       Select the output device to use  Optional. Type uniline.

       upstream_default value :
           /dev/lcd

   Model
       Select the LCD model  Optional. Type enum. choice: '533', '631', '633', '635'.

       upstream_default value :
           633

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched
       off in case LCDd is inactive.  Optional. Type integer.

       upstream_default value :
           0

   OldFirmware
       Very old 633 firmware versions do not support partial screen updates using 'Send Data to
       LCD' command (31). For those devices it may be necessary to enable this flag.  Optional.
       Type boolean.

       upstream_default value :
           no

   Reboot
       Reinitialize the LCD's BIOS on driver start.  Optional. Type boolean.

       upstream_default value :
           no

   Size
       Override the LCD size known for the selected model. Usually setting this value should not
       be necessary.  Optional. Type uniline.

       upstream_default value :
           20x4

   Speed
       Override the default communication speed known for the selected model.  Default value
       depends on model  Optional. Type enum. choice: '19200', '115200'.

   USB
       Enable the USB flag if the device is connected to an USB port. For serial ports leave it
       disabled.  Optional. Type boolean.

       upstream_default value :
           no

SEE ALSO

       •   cme

perl v5.36.0                                2022-10Config::Model::models::LCDd::CFontzPacket(3pm)