Provided by: libmoose-perl_2.2206-1_amd64 bug

NAME

       Moose::Meta::Attribute - The Moose attribute metaclass

VERSION

       version 2.2206

DESCRIPTION

       This class is a subclass of Class::MOP::Attribute that provides additional Moose-specific
       functionality.

       To really understand this class, you will need to start with the Class::MOP::Attribute
       documentation. This class can be understood as a set of additional features on top of the
       basic feature provided by that parent class.

INHERITANCE

       "Moose::Meta::Attribute" is a subclass of Class::MOP::Attribute.

METHODS

       Many of the documented below override methods in Class::MOP::Attribute and add Moose
       specific features.

   Creation
       Moose::Meta::Attribute->new($name, %options)
           This method overrides the Class::MOP::Attribute constructor.

           Many of the options below are described in more detail in the
           Moose::Manual::Attributes document.

           It adds the following options to the constructor:

           •       is => 'ro', 'rw', 'bare'

                   This provides a shorthand for specifying the "reader", "writer", or "accessor"
                   names. If the attribute is read-only ('ro') then it will have a "reader"
                   method with the same attribute as the name.

                   If it is read-write ('rw') then it will have an "accessor" method with the
                   same name. If you provide an explicit "writer" for a read-write attribute,
                   then you will have a "reader" with the same name as the attribute, and a
                   "writer" with the name you provided.

                   Use 'bare' when you are deliberately not installing any methods (accessor,
                   reader, etc.) associated with this attribute; otherwise, Moose will issue a
                   warning when this attribute is added to a metaclass.

           •       isa => $type

                   This option accepts a type. The type can be a string, which should be a type
                   name. If the type name is unknown, it is assumed to be a class name.

                   This option can also accept a Moose::Meta::TypeConstraint object.

                   If you also provide a "does" option, then your "isa" option must be a class
                   name, and that class must do the role specified with "does".

           •       does => $role

                   This is short-hand for saying that the attribute's type must be an object
                   which does the named role.

           •       coerce => $bool

                   This option is only valid for objects with a type constraint ("isa") that
                   defined a coercion. If this is true, then coercions will be applied whenever
                   this attribute is set.

                   You cannot make both this and the "weak_ref" option true.

           •       trigger => $sub

                   This option accepts a subroutine reference, which will be called after the
                   attribute is set.

           •       required => $bool

                   An attribute which is required must be provided to the constructor. An
                   attribute which is required can also have a "default" or "builder", which will
                   satisfy its required-ness.

                   A required attribute must have a "default", "builder" or a non-"undef"
                   "init_arg"

           •       lazy => $bool

                   A lazy attribute must have a "default" or "builder". When an attribute is
                   lazy, the default value will not be calculated until the attribute is read.

           •       weak_ref => $bool

                   If this is true, the attribute's value will be stored as a weak reference.

           •       documentation

                   An arbitrary string that can be retrieved later by calling
                   "$attr->documentation".

           •       auto_deref => $bool

                   Note that in cases where you want this feature you are often better served by
                   using a Moose::Meta::Attribute::Native trait instead.

                   If this is true, then the reader will dereference the value when it is called.
                   The attribute must have a type constraint which defines the attribute as an
                   array or hash reference.

           •       lazy_build => $bool

                   Note that use of this feature is strongly discouraged. Some documentation used
                   to encourage use of this feature as a best practice, but we have changed our
                   minds.

                   Setting this to true makes the attribute lazy and provides a number of default
                   methods.

                     has 'size' => (
                         is         => 'ro',
                         lazy_build => 1,
                     );

                   is equivalent to this:

                     has 'size' => (
                         is        => 'ro',
                         lazy      => 1,
                         builder   => '_build_size',
                         clearer   => 'clear_size',
                         predicate => 'has_size',
                     );

                   If your attribute name starts with an underscore ("_"), then the clearer and
                   predicate will as well:

                     has '_size' => (
                         is         => 'ro',
                         lazy_build => 1,
                     );

                   becomes:

                     has '_size' => (
                         is        => 'ro',
                         lazy      => 1,
                         builder   => '_build__size',
                         clearer   => '_clear_size',
                         predicate => '_has_size',
                     );

                   Note the doubled underscore in the builder name. Internally, Moose simply
                   prepends the attribute name with "_build_" to come up with the builder name.

           •       role_attribute => $role_attribute

                   If provided, this should be a Moose::Meta::Role::Attribute object.

       $attr->clone(%options)
           This creates a new attribute based on attribute being cloned. You must supply a "name"
           option to provide a new name for the attribute.

           The %options can only specify options handled by Class::MOP::Attribute.

   Value management
       $attr->initialize_instance_slot($meta_instance, $instance, $params)
           This method is used internally to initialize the attribute's slot in the object
           $instance.

           This overrides the Class::MOP::Attribute method to handle lazy attributes, weak
           references, and type constraints.

       get_value
       set_value
             eval { $point->meta->get_attribute('x')->set_value($point, 'forty-two') };
             if($@) {
               print "Oops: $@\n";
             }

           Attribute (x) does not pass the type constraint (Int) with 'forty-two'

           Before setting the value, a check is made on the type constraint of the attribute, if
           it has one, to see if the value passes it. If the value fails to pass, the set
           operation dies.

           Any coercion to convert values is done before checking the type constraint.

           To check a value against a type constraint before setting it, fetch the attribute
           instance using "find_attribute_by_name" in Class::MOP::Class, fetch the
           type_constraint from the attribute using "type_constraint" in Moose::Meta::Attribute
           and call "check" in Moose::Meta::TypeConstraint. See
           Moose::Cookbook::Basics::Company_Subtypes for an example.

   Attribute Accessor generation
       $attr->install_accessors
           This method overrides the parent to also install delegation methods.

           If, after installing all methods, the attribute object has no associated methods, it
           throws an error unless "is => 'bare'" was passed to the attribute constructor.
           (Trying to add an attribute that has no associated methods is almost always an error.)

       $attr->remove_accessors
           This method overrides the parent to also remove delegation methods.

       $attr->inline_set($instance_var, $value_var)
           This method return a code snippet suitable for inlining the relevant operation. It
           expect strings containing variable names to be used in the inlining, like '$self' or
           '$_[1]'.

       $attr->install_delegation
           This method adds its delegation methods to the attribute's associated class, if it has
           any to add.

       $attr->remove_delegation
           This method remove its delegation methods from the attribute's associated class.

       $attr->accessor_metaclass
           Returns the accessor metaclass name, which defaults to Moose::Meta::Method::Accessor.

       $attr->delegation_metaclass
           Returns the delegation metaclass name, which defaults to
           Moose::Meta::Method::Delegation.

   Additional Moose features
       These methods are not found in the superclass. They support features provided by Moose.

       $attr->does($role)
           This indicates whether the attribute itself does the given role. The role can be given
           as a full class name, or as a resolvable trait name.

           Note that this checks the attribute itself, not its type constraint, so it is checking
           the attribute's metaclass and any traits applied to the attribute.

       Moose::Meta::Class->interpolate_class_and_new($name, %options)
           This is an alternate constructor that handles the "metaclass" and "traits" options.

           Effectively, this method is a factory that finds or creates the appropriate class for
           the given "metaclass" and/or "traits".

           Once it has the appropriate class, it will call "$class->new($name, %options)" on that
           class.

       $attr->clone_and_inherit_options(%options)
           This method supports the "has '+foo'" feature. It does various bits of processing on
           the supplied %options before ultimately calling the "clone" method.

           One of its main tasks is to make sure that the %options provided does not include the
           options returned by the "illegal_options_for_inheritance" method.

       $attr->illegal_options_for_inheritance
           This returns a blacklist of options that can not be overridden in a subclass's
           attribute definition.

           This exists to allow a custom metaclass to change or add to the list of options which
           can not be changed.

       $attr->type_constraint
           Returns the Moose::Meta::TypeConstraint object for this attribute, if it has one.

       $attr->has_type_constraint
           Returns true if this attribute has a type constraint.

       $attr->verify_against_type_constraint($value)
           Given a value, this method returns true if the value is valid for the attribute's type
           constraint. If the value is not valid, it throws an error.

       $attr->handles
           This returns the value of the "handles" option passed to the constructor.

       $attr->has_handles
           Returns true if this attribute performs delegation.

       $attr->is_weak_ref
           Returns true if this attribute stores its value as a weak reference.

       $attr->is_required
           Returns true if this attribute is required to have a value.

       $attr->is_lazy
           Returns true if this attribute is lazy.

       $attr->is_lazy_build
           Returns true if the "lazy_build" option was true when passed to the constructor.

       $attr->should_coerce
           Returns true if the "coerce" option passed to the constructor was true.

       $attr->should_auto_deref
           Returns true if the "auto_deref" option passed to the constructor was true.

       $attr->trigger
           This is the subroutine reference that was in the "trigger" option passed to the
           constructor, if any.

       $attr->has_trigger
           Returns true if this attribute has a trigger set.

       $attr->documentation
           Returns the value that was in the "documentation" option passed to the constructor, if
           any.

       $attr->has_documentation
           Returns true if this attribute has any documentation.

       $attr->role_attribute
           Returns the Moose::Meta::Role::Attribute object from which this attribute was created,
           if any. This may return "undef".

       $attr->has_role_attribute
           Returns true if this attribute has an associated role attribute.

       $attr->applied_traits
           This returns an array reference of all the traits which were applied to this
           attribute. If none were applied, this returns "undef".

       $attr->has_applied_traits
           Returns true if this attribute has any traits applied.

BUGS

       See "BUGS" in Moose for details on reporting bugs.

AUTHORS

       •   Stevan Little <stevan@cpan.org>

       •   Dave Rolsky <autarch@urth.org>

       •   Jesse Luehrs <doy@cpan.org>

       •   Shawn M Moore <sartak@cpan.org>

       •   יובל קוג'מן (Yuval Kogman) <nothingmuch@woobling.org>

       •   Karen Etheridge <ether@cpan.org>

       •   Florian Ragwitz <rafl@debian.org>

       •   Hans Dieter Pearcey <hdp@cpan.org>

       •   Chris Prather <chris@prather.org>

       •   Matt S Trout <mstrout@cpan.org>

COPYRIGHT AND LICENSE

       This software is copyright (c) 2006 by Infinity Interactive, Inc.

       This is free software; you can redistribute it and/or modify it under the same terms as
       the Perl 5 programming language system itself.