Provided by: perl-tk_804.036-1build1_amd64 bug

NAME

       Tk::place - Geometry manager for fixed or rubber-sheet placement

SYNOPSIS

          $widget->place?(-option=>value?, -option=>value, ...)?

          $widget->placeForget

          $widget->placeInfo

          $master->placeSlaves

DESCRIPTION

       The placer is a geometry manager for Tk.  It provides simple fixed placement of windows,
       where you specify the exact size and location of one window, called the slave, within
       another window, called the master.  The placer also provides rubber-sheet placement, where
       you specify the size and location of the slave in terms of the dimensions of the master,
       so that the slave changes size and location in response to changes in the size of the
       master.  Lastly, the placer allows you to mix these styles of placement so that, for
       example, the slave has a fixed width and height but is centered inside the master.

       $slave->place?(-option=>value?, -option=>value, ...?)?
           The place method arranges for the placer to manage the geometry of $slave.  The
           remaining arguments consist of one or more -option=>value pairs that specify the way
           in which $slave's geometry is managed. -option may have any of the values accepted by
           the placeConfigure method.

           The place method returns $slave.

       $slave->placeConfigure?(-option=>value?, -option=>value, ...?)?
           Query or modify the geometry options of the $slave. If no option is specified, this
           method returns a list describing the available options (see Tk_ConfigureInfo for
           information on the format of this list). If option is specified with no value, then
           the command returns a list describing the one named option (this list will be
           identical to the corresponding sublist of the value returned if no option is
           specified). If one or more option-value pairs are specified, then the method modifies
           the given option(s) to have the given value(s); in this case the command returns
           "undef".

           The following -option=>value pairs are supported:

           -anchor => where
                   Where specifies which point of $slave is to be positioned at the (x,y)
                   location selected by the -x, -y, -relx, and -rely options.  The anchor point
                   is in terms of the outer area of $slave including its border, if any.  Thus if
                   where is se then the lower-right corner of $slave's border will appear at the
                   given (x,y) location in the master.  The anchor position defaults to nw.

           -bordermode => mode
                   Mode determines the degree to which borders within the master are used in
                   determining the placement of the slave.  The default and most common value is
                   inside.  In this case the placer considers the area of the master to be the
                   innermost area of the master, inside any border: an option of -x=>0
                   corresponds to an x-coordinate just inside the border and an option of
                   -relwidth=>1.0 means $slave will fill the area inside the master's border.  If
                   mode is outside then the placer considers the area of the master to include
                   its border; this mode is typically used when placing $slave outside its
                   master, as with the options -x=>0, -y=>0, -anchor=>ne.  Lastly, mode may be
                   specified as ignore, in which case borders are ignored:  the area of the
                   master is considered to be its official X area, which includes any internal
                   border but no external border.  A bordermode of ignore is probably not very
                   useful.

           -height => size
                   Size specifies the height for $slave in screen units (i.e. any of the forms
                   accepted by Tk_GetPixels).  The height will be the outer dimension of $slave
                   including its border, if any.  If size is an empty string, or if no -height or
                   -relheight option is specified, then the height requested internally by the
                   window will be used.

           -in => $master
                   $master is the reference to the window relative to which $slave is to be
                   placed.  $master must either be $slave's parent or a descendant of $slave's
                   parent.  In addition, $master and $slave must both be descendants of the same
                   top-level window.  These restrictions are necessary to guarantee that $slave
                   is visible whenever $master is visible.  If this option isn't specified then
                   the master defaults to $slave's parent.

           -relheight => size
                   Size specifies the height for $slave.  In this case the height is specified as
                   a floating-point number relative to the height of the master: 0.5 means $slave
                   will be half as high as the master, 1.0 means $slave will have the same height
                   as the master, and so on.  If both -height and -relheight are specified for a
                   slave, their values are summed.  For example, -relheight=>1.0, -height=>-2
                   makes the slave 2 pixels shorter than the master.

           -relwidth => size
                   Size specifies the width for $slave.  In this case the width is specified as a
                   floating-point number relative to the width of the master: 0.5 means $slave
                   will be half as wide as the master, 1.0 means $slave will have the same width
                   as the master, and so on.  If both -width and -relwidth are specified for a
                   slave, their values are summed.  For example, -relwidth=>1.0, -width=>5 makes
                   the slave 5 pixels wider than the master.

           -relx => location
                   Location specifies the x-coordinate within the master window of the anchor
                   point for $slave widget.  In this case the location is specified in a relative
                   fashion as a floating-point number:  0.0 corresponds to the left edge of the
                   master and 1.0 corresponds to the right edge of the master.  Location need not
                   be in the range 0.0-1.0.  If both -x and -relx are specified for a slave then
                   their values are summed.  For example, "-relx=>0.5, -x=-2" positions the left
                   edge of the slave 2 pixels to the left of the center of its master.

           -rely => location
                   Location specifies the y-coordinate within the master window of the anchor
                   point for $slave widget.  In this case the value is specified in a relative
                   fashion as a floating-point number:  0.0 corresponds to the top edge of the
                   master and 1.0 corresponds to the bottom edge of the master.  Location need
                   not be in the range 0.0-1.0.  If both -y and -rely are specified for a slave
                   then their values are summed.  For example, -rely=>0.5, -x=>3 positions the
                   top edge of the slave 3 pixels below the center of its master.

           -width => size
                   Size specifies the width for $slave in screen units (i.e. any of the forms
                   accepted by Tk_GetPixels).  The width will be the outer width of $slave
                   including its border, if any.  If size is an empty string, or if no -width or
                   -relwidth option is specified, then the width requested internally by the
                   window will be used.

           -x => location
                   Location specifies the x-coordinate within the master window of the anchor
                   point for $slave widget.  The location is specified in screen units (i.e. any
                   of the forms accepted by Tk_GetPixels) and need not lie within the bounds of
                   the master window.

           -y => location
                   Location specifies the y-coordinate within the master window of the anchor
                   point for $slave widget.  The location is specified in screen units (i.e. any
                   of the forms accepted by Tk_GetPixels) and need not lie within the bounds of
                   the master window.

           If the same value is specified separately with two different options, such as -x and
           -relx, then the most recent option is used and the older one is ignored.

       $slave->placeForget
           The placeForget method causes the placer to stop managing the geometry of $slave.  As
           a side effect of this method call $slave will be unmapped so that it doesn't appear on
           the screen.  If $slave isn't currently managed by the placer then the method call has
           no effect.  placeForget returns an empty string as result.

       $slave->placeInfo
           The placeInfo method returns a list giving the current configuration of $slave.  The
           list consists of -option=>value pairs in exactly the same form as might be specified
           to the place method.

       $slave->placeSlaves
           The placeSlaves method returns a list of all the slave windows for which $master is
           the master.  If there are no slaves for $master then an empty list is returned.

       If the configuration of a window has been retrieved with placeInfo, that configuration can
       be restored later by first using placeForget to erase any existing information for the
       window and then invoking place with the saved information.

FINE POINTS

       It is not necessary for the master window to be the parent of the slave window.  This
       feature is useful in at least two situations.  First, for complex window layouts it means
       you can create a hierarchy of subwindows whose only purpose is to assist in the layout of
       the parent.  The ``real children'' of the parent (i.e. the windows that are significant
       for the application's user interface) can be children of the parent yet be placed inside
       the windows of the geometry-management hierarchy.  This means that the path names of the
       ``real children'' don't reflect the geometry-management hierarchy and users can specify
       options for the real children without being aware of the structure of the geometry-
       management hierarchy.

       A second reason for having a master different than the slave's parent is to tie two
       siblings together.  For example, the placer can be used to force a window always to be
       positioned centered just below one of its siblings by specifying the configuration

           -in=>$sibling, -relx=>0.5, -rely=>1.0, -anchor=>'n', -bordermode=>'outside'

       Whenever the $sibling widget is repositioned in the future, the slave will be repositioned
       as well.

       Unlike many other geometry managers (such as the packer) the placer does not make any
       attempt to manipulate the geometry of the master windows or the parents of slave windows
       (i.e. it doesn't set their requested sizes).  To control the sizes of these windows, make
       them windows like frames and canvases that provide configuration options for this purpose.

SEE ALSO

       Tk::form, Tk::grid, Tk::pack

KEYWORDS

       geometry manager, height, location, master, place, rubber sheet, slave, width