Provided by: avahi-daemon_0.8-10ubuntu1.1_amd64 
NAME
avahi-daemon.conf - avahi-daemon configuration file
SYNOPSIS
/etc/avahi/avahi-daemon.conf
DESCRIPTION
avahi-daemon.conf is the configuration file for avahi-daemon.
SECTION [SERVER]
host-name= Set the host name avahi-daemon tries to register on the LAN. If omited defaults
to the system host name as set with the sethostname() system call.
host-name-from-machine-id= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-
daemon will use the machine-id as name on the LAN.
domain-name= Set the default domain name avahi-daemon tries to register its host name and
services on the LAN in. If omitted defaults to ".local".
browse-domains= Set a comma separated list of browsing domains (in addition to the default
one and those announced inside the default browsing domain). Please note that the user may
specify additional browsing domains on the client side, either by setting
$AVAHI_BROWSE_DOMAINS to a list of colon separated domains or by adding them to the XDG
config file ~/.config/avahi/browse-domains (separated by newlines).
use-ipv4= Takes a boolean value ("yes" or "no"). If set to "no" avahi-daemon will not use
IPv4 sockets. Default is "yes".
use-ipv6= Takes a boolean value ("yes" or "no"). If set to "no" avahi-daemon will not use
IPv6 sockets. Default is "yes".
allow-interfaces= Set a comma separated list of allowed network interfaces that should be
used by the avahi-daemon. Traffic on other interfaces will be ignored. If set to an empty
list all local interfaces except loopback and point-to-point will be used.
deny-interfaces= Set a comma separated list of network interfaces that should be ignored
by avahi-daemon. Other not specified interfaces will be used, unless allow-interfaces= is
set. This option takes precedence over allow-interfaces=.
check-response-ttl= Takes a boolean value ("yes" or "no"). If set to "yes", an additional
security check is activated: incoming IP packets will be ignored unless the IP TTL is 255.
Earlier mDNS specifications required this check. Since this feature may be incompatible
with newer implementations of mDNS it defaults to "no". On the other hand it provides
extra security.
use-iff-running= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon
monitors the IFF_RUNNING flag bit which is used by some (modern) network drivers to tell
user space if a network cable is plugged in (in case of copper ethernet), or the network
card is associated with some kind of network (in case of WLAN). If IFF_RUNNING is set
avahi-daemon will automatically announce its services on that network. Unfortunately far
too many network drivers do not support this flag or support it in a broken way. Therefore
this option defaults to "no".
enable-dbus= Takes either "yes", "no" or "warn". If set to "yes" avahi-daemon connects to
D-Bus, offering an object oriented client API. It is only available if Avahi has been
compiled with --enable-dbus in which case it defaults to "yes". "warn" behaves like "yes",
but the daemon starts up even when it fails to connect to a D-Bus daemon. In addition, if
the connection to the D-Bus daemon is terminated we try to reconnect. (Unless we are in a
chroot() environment where this definitely will fail.)
disallow-other-stacks= Takes a boolean value ("yes" or "no"). If set to "yes" no other
process is allowed to bind to UDP port 5353. This effectively impedes other mDNS stacks
from running on the host. Use this as a security measure to make sure that only Avahi is
responsible for mDNS traffic. Please note that we do not recommend running multiple mDNS
stacks on the same host simultaneously. This hampers reliability and is a waste of
resources. However, to not annoy people this option defaults to "no".
allow-point-to-point= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon
will make use of interfaces with the POINTOPOINT flag set. This option defaults to "no" as
it might make mDNS unreliable due to usually large latencies with such links and opens a
potential security hole by allowing mDNS access from Internet connections. Use with care
and YMMV!
cache-entries-max= Takes an unsigned integer specifying how many resource records are
cached per interface. Bigger values allow mDNS work correctly in large LANs but also
increase memory consumption.
clients-max= Takes an unsigned integer. The maximum number of concurrent D-Bus clients
allowed. If the maximum number is reached further clients will be refused until at least
one existing client disconnects.
objects-per-client-max= Takes an unsigned integer. The maximum number of objects (entry
groups, browsers, resolvers) that may be registered per D-Bus client at a time. If the
maximum number is reached further object creation will be refused until at least one
object is freed.
entries-per-entry-group-max= Takes an unsigned integer. The maximum number of entries
(resource records) per entry group registered by a D-Bus client at a time. If the maximum
number is reached further resource records may not be added to an entry group.
ratelimit-interval-usec= Takes an unsigned integer. Sets the per-interface packet rate-
limiting interval parameter. Together with ratelimit-burst= this may be used to control
the maximum number of packets Avahi will generated in a specific period of time on an
interface.
ratelimit-burst= Takes an unsigned integer. Sets the per-interface packet rate-limiting
burst parameter. Together with ratelimit-interval-usec= this may be used to control the
maximum number of packets Avahi will generated in a specific period of time on an
interface.
SECTION [WIDE-AREA]
enable-wide-area= Takes a boolean value ("yes" or "no"). Enable wide-area DNS-SD, aka DNS-
SD over unicast DNS. If this is enabled only domains ending in .local will be resolved on
mDNS, all other domains are resolved via unicast DNS. If you want to maintain multiple
different multicast DNS domains even with this option enabled we encourage you to use
subdomains of .local, such as "kitchen.local". This option defaults to "yes".
SECTION [PUBLISH]
disable-publishing= Takes a boolean value ("yes" or "no"). If set to "yes", no record will
be published by Avahi, not even address records for the local host. Avahi will be started
in a querying-only mode. Use this is a security measure. This option defaults to "no"
disable-user-service-publishing= Takes a boolean value ("yes" or "no"). If set to "yes",
Avahi will still publish address records and suchlike but will not allow user applications
to publish services. Use this is a security measure. This option defaults to "no"
add-service-cookie= Takes a boolean value ("yes" or "no"). If set to "yes" an implicit TXT
entry will be added to all locally registered services, containing a cookie value which is
chosen randomly on daemon startup. This can be used to detect if two services on two
different interfaces/protocols are actually identical. Defaults to "no".
publish-addresses= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon
will register mDNS address records for all local IP addresses. Unless you want to use
avahi-daemon exclusively for browsing it's recommended to enable this. If you plan to
register local services you need to enable this option. Defaults to "yes".
publish-hinfo= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon will
register an mDNS HINFO record on all interfaces which contains information about the local
operating system and CPU, which might be useful for administrative purposes. This is
recommended by the mDNS specification but not required. For the sake of privacy you might
choose to disable this feature. Defaults to "no".
publish-workstation= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon
will register a service of type "_workstation._tcp" on the local LAN. This might be useful
for administrative purposes (i.e. browse for all PCs on the LAN), but is not required or
recommended by any specification. Newer MacOS X releases register a service of this type.
Defaults to "no".
publish-domain= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon will
announce the locally used domain name (see above) for browsing by other hosts. Defaults to
"yes".
publish-dns-servers= Takes a comma separated list of IP addresses for unicast DNS servers.
You can use this to announce unicast DNS servers via mDNS. When used in conjunction with
avahi-dnsconfd on the client side this allows DHCP-like configuration of unicast DNS
servers.
publish-resolv-conf-dns-servers= Takes a boolean value ("yes" or "no"). If set to "yes"
avahi-daemon will publish the unicast DNS servers specified in /etc/resolv.conf in
addition to those specified with publish-dns-servers. Send avahi-daemon a SIGHUP to have
it reload this file. Defaults to "no".
publish-aaaa-on-ipv4= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon
will publish an IPv6 AAAA record via IPv4, i.e. the local IPv6 addresses can be resolved
using an IPv4 transport. Only useful when IPv4 is enabled with use-ipv4=true. Defaults to
"yes".
publish-a-on-ipv6= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon
will publish an IPv4 A record via IPv6, i.e. the local IPv4 addresses can be resolved
using an IPv6 transport. Only useful when IPv6 is enabled with use-ipv6=true. Defaults to
"no".
SECTION [REFLECTOR]
enable-reflector= Takes a boolean value ("yes" or "no"). If set to "yes" avahi-daemon will
reflect incoming mDNS requests to all local network interfaces, effectively allowing
clients to browse mDNS/DNS-SD services on all networks connected to the gateway. The
gateway is somewhat intelligent and should work with all kinds of mDNS traffic, though
some functionality is lost (specifically the unicast reply bit, which is used rarely
anyway). Make sure to not run multiple reflectors between the same networks, this might
cause them to play Ping Pong with mDNS packets. Defaults to "no".
reflect-ipv= Takes a boolean value ("yes" or "no"). If set to "yes" and enable-reflector
is enabled, avahi-daemon will forward mDNS traffic between IPv4 and IPv6, which is usually
not recommended. Defaults to "no".
reflect-filters= Set a comma separated list of allowed service names to be reflected. Each
service that is seen must match an entry in this list to be reflected to other networks.
This list can match the type of service or the name of the machine providing the service.
Defaults to allowing all services.
SECTION [RLIMITS]
This section is used to define system resource limits for the daemon. See setrlimit(2) for
more information. If any of the options is not specified in the configuration file, avahi-
daemon does not change it from the system defaults.
rlimit-as= Value in bytes for RLIMIT_AS (maximum size of the process's virtual memory).
Sensible values are heavily system dependent.
rlimit-core= Value in bytes for RLIMIT_CORE (maximum core file size). Unless you want to
debug avahi-daemon, it is safe to set this to 0.
rlimit-data= Value in bytes for RLIMIT_DATA (maximum size of the process's data segment).
Sensible values are heavily system dependent.
rlimit-fsize= Value for RLIMIT_FSIZE (maximum size of files the process may create). Since
avahi-daemon shouldn't write any files to disk, it is safe to set this to 0.
rlimit-nofile= Value for RLIMIT_NOFILE (open file descriptors). avahi-daemon shouldn't
need more than 15 to 20 open file descriptors concurrently.
rlimit-stack= Value in bytes for RLIMIT_STACK (maximum size of the process stack).
Sensible values are heavily system dependent.
rlimit-nproc= Value for RLIMIT_NPROC (max number of processes a user can launch). avahi-
daemon forks of a helper process on systems where chroot(2) is available therefore this
value should not be set below 2. Note that while the process limit only applies to this
process, the total count of processes to reach that limit includes all processes on the
system with the same UID, including any containers without UID remapping (such as lxd
containers with security.privileged=true). The default configuration of 3 was removed to
prevent problems in this scenario.
AUTHORS
The Avahi Developers <avahi (at) lists (dot) freedesktop (dot) org>; Avahi is available
from http://avahi.org/
SEE ALSO
avahi-daemon(8), avahi-dnsconfd(8)
COMMENTS
This man page was written using xml2man(1) by Oliver Kurth.