Provided by: inadyn_2.10.0-1_amd64 
NAME
inadyn.conf — inadyn DDNS client configuration file
SYNOPSIS
/etc/inadyn.conf
DESCRIPTION
inadyn is configured using a simple configuration file. The “#” character marks start of a
comment to end of line. The \ character can be used as an escape character.
verify-address = <true | false>
By default inadyn verifies both IPv4 and IPv6 addresses, making sure the address is a
valid Internet address. Invalid addresses are, e.g., link local, loopback, multicast
and known experimental addresses. For more information, see RFC3330.
IP address validation can be disabled by setting this option to false.
fake-address = <true | false>
When using SIGUSR1, to do a forced update, this option can be used to fake an address
update with a “random” address in the 203.0.113.0/24 range, example address range from
RFC5737, before updating with the actual IP address. This is completely outside
spec., but can be useful for people who very rarely, if ever, get an IP address
change. Because some DDNS service providers will not register even a forced update if
the IP is the same. As a result the user could be deregistered as an inactive user.
allow-ipv6 = <true | false>
Inadyn can get an IPv6 address from an interface, or with an external checkip script.
This option controls if IPv6 addresses should be allowed or discarded. By default
this option is false, i.e. any IPv6 addresses found are discarded.
iface = IFNAME
Use network interface IFNAME as source of IP address changes instead of querying an
external server. With this option is enabled, the external IP check is disabled and
inadyn will send DDNS updates using the IP address of the IFNAME network interface to
all DDNS providers listed in the configuration file. This can be useful to register
LAN IP addresses, or, when connected directly to a public IP address, to speed up the
IP check if the DDNS provider's check-ip servers are slow to respond.
This option can also be given as a command line option to inadyn(8), both serve a
purpose, use whichever one works for you.
iterations = <NUM | 0>
Set the number of DNS updates. The default is 0, which means infinity.
period = SEC
How often the IP is checked, in seconds. Default: apxrox. 1 minute. Max: 10 days.
forced-update = SEC
How often the IP should be updated even if it is not changed. The time should be given
in seconds. Default is equal to 30 days.
secure-ssl = < true | false >
If the HTTPS certificate validation fails for a provider inadyn aborts the DDNS update
before sending any credentials. When this setting is disabled, i.e. false, then
inadyn will only issue a warning. By default this setting is enabled, because
security matters.
broken-rtc = < true | false >
HTTPS certificates are only valid within specified time windows, so on systems without
hardware real-time clock and default bootup time far in the past, false-positive
validation fail is expected. When this setting is enabled, i.e. true, then inadyn
will only issue a warning that the certificate is not valid yet. By default this
setting is disabled, because security matters.
ca-trust-file = FILE
By default inadyn uses the built-in path to the system's trusted CA certificates, both
GnuTLS and Open/LibreSSL support this. As a fall-back, in case the API's to load CA
certificates from the built-in path fails, inadyn also supports common default paths
to Debian and RedHat CA bundles.
This setting overrides the built-in paths and fallback locations and provides a way to
specify the path to a trusted set of CA certificates, in PEM format, bundled into one
file.
user-agent = STRING
Specify the User-Agent string to send to the DDNS provider on checkip and update
requests. Some providers require this field to be set to a specific string, some may
be OK with "Mozilla/4.0". The default is to send "inadyn/VERSION SUPPORTURL", where
VERSION is the current inadyn version, and SUPPORTURL is the upstream support URL.
This can also be set on a per-provider basis, see below custom and provider section
description.
custom some@identifier {}
The custom{} and provider{} sections are very similar, except that the custom section
allows customizing the DDNS update server details. For more details, see the
description for provider{}, below.
provider email@ddns-service.tld[:ID] {}
The custom{} and provider{} sections are very similar, except that the custom section
allows customizing the DDNS update server details. See below list for supported DDNS
providers and their email@ddns-service.tld identifiers.
To support multiple users of the same DDNS provider, append [:ID] to the provider
name. The ID can be any free form string or number as long as the combination is
unique.
Common settings in custom{} and provider{} sections are:
include("/path/to/file")
Include settings from another file, supports tilde expansion, e.g.
~/.freedns.pw. Any custom{} or provider{} setting can be included, and any
amount of include statements may be used.
ssl = <true | false>
Use HTTPS, both when checking for IP changes and updating the DNS record.
Default is to use HTTPS (true).
username = USERNAME.
The username, if applicable. This might be referred to as hash by some
providers.
password = PASSWORD
The password, if applicable.
iface = IFNAME
Same as the global setting, but only for this provider. For more information,
see above.
checkip-server = <default | checkip.example.com[:port]>
This setting allows you to override the default checkip server with either the
string default, to use In-a-dyn's built-in default, api.ipify.org, or the
complete name of the server to use for periodic IP address changes. The
optional port argument defaults to 80.
This is an optional setting. For provider{} sections it defaults to a pre-
defined checkip-server and checkip-path for the given DDNS provider. For custom
DDNS setups it defaults to api.ipify.org, which is a really great and free
service that even support HTTPS, see checkip-ssl setting, below. When set in a
provider{} section it overrides the provider's default checkip-server.
checkip-path = /some/checkip/url
Optional server path for check IP server, defaults to "/". When the
checkip-server is set to default, this setting is ignored.
checkip-ssl = <true | false>
This setting usually follows the ssl setting, but can be used to disable HTTPS
for the IP address check. This might be needed for some providers that only
support HTTPS for the DNS record update.
However, when a custom checkip-server is defined for a provider, this setting
does not follow the ssl setting. Default is to use HTTPS (true).
checkip-command = /path/to/shell/command [optional args]
Shell command, or script, for IP address update checking. The command must
output a text with the IP address to its standard output. The following
environment variables are set:
INADYN_PROVIDER
contains the DDNS provider's full name in form email@ddns-service.tld
INADYN_USER
contains user's name
Example:
checkip-command = "/sbin/ifconfig eth0 | grep 'inet addr'"
Inadyn will use the first occurrence in the command's output that looks like an
address. Both IPv4 and IPv6 addresses are supported.
hostname = HOSTNAME
hostname = { HOSTNAME1.name.tld, HOSTNAME2.name.tld }
Your hostname alias. To list multiple names, use the second form.
user-agent = STRING
Same as the global setting, but only for this provider. If omitted it defaults
to the global setting, which if unset uses the default inadyn user agent string.
For more information, see above.
wildcard = <true | false>
Enable domain name wildcarding of your domain name, for DDNS providers that
support this, e.g. easydns.com and loopia.com. This means that anything typed
before your hostname, e.g. www. or ftp., is also updated when your IP changes.
Default: disabled. For inadyn < 1.96.3 wildcarding was enabled by default.
ttl = SEC
Time to live of your domain name. Only works with supported DDNS providers,
e.g. cloudflare.com.
proxied = <true | false>
Proxy DNS origin via provider's CDN network. Only works with supported DDNS
providers, e.g. cloudflare.com. Default: false
provider [email@]ddns-service[.tld] {}
Either a unique substring matching the provider, or or one of the exact matches to the
following unique provider names:
default@freedns.afraid.org
⟨https://freedns.afraid.org⟩
ipv4@nsupdate.info
⟨https://nsupdate.info⟩
default@duckdns.org
⟨https://duckdns.org⟩
default@freemyip.com
⟨https://freemyip.com⟩
default@loopia.com
⟨https://www.loopia.com⟩
default@dyndns.org
Connect to ⟨https://www.dyndns.org⟩, i.e., ⟨https://dyn.com⟩
default@noip.com
⟨https://www.noip.com⟩
default@no-ip.com
Handled by default@noip.com plugin.
default@easydns.com
⟨https://www.easydns.com⟩
default@dnsomatic.com
⟨https://www.dnsomatic.com⟩
dyndns@he.net
⟨https://dns.he.net⟩
default@tunnelbroker.net
IPv6 ⟨https://www.tunnelbroker.net⟩ by Hurricane Electric.
default@sitelutions.com
⟨https://www.sitelutions.com⟩
default@dnsexit.com
⟨https://www.dnsexit.com⟩
default@zoneedit.com
⟨https://zoneedit.com⟩
default@changeip.com
⟨https://www.changeip.com⟩
default@dhis.org
⟨https://www.dhis.org⟩
default@domains.google.com
⟨https://domains.google⟩
default@ovh.com
⟨https://www.ovh.com⟩
default@gira.de
⟨https://giradns.com⟩
default@duiadns.net
⟨https://www.duiadns.net⟩
default@ddnss.de
⟨https://ddnss.de⟩
default@dynv6.com
⟨https://dynv6.com⟩
default@ipv4.dynv6.com
⟨https://ipv4.dynv6.com⟩
default@spdyn.de
⟨https://spdyn.de⟩
default@strato.com
⟨https://www.strato.com⟩
default@cloudxns.net
⟨https://www.cloudxns.net⟩
dyndns@3322.org
⟨https://www.3322.org⟩
default@dnspod.cn
⟨https://www.dnspod.cn⟩
default@dynu.com
⟨https://www.dynu.com⟩
default@selfhost.de
⟨https://www.selfhost.de⟩
default@pdd.yandex.ru
⟨https://connect.yandex.ru⟩
default@cloudflare.com
⟨https://www.cloudflare.com⟩
custom some@identifier {}
Specific to the custom provider section are the following settings:
ddns-server = update.example.com
DDNS server name, not the full URL.
ddns-path = /update?domain=
DDNS server path. By default the hostname is appended to the path, unless
append-myip=true is set. Alternatively, printf(3) like format specifiers may be
used for a fully customizable HTTP GET update request. The following format
specifiers are currently supported:
%u username
%p password, if HTTP basic auth is not used
%h hostname
%i IP address
With the following example:
username = myuser
password = mypass
ddns-path = "/update?user=%u&password=%p&domain=%h&myip=%i"
hostname = YOURDOMAIN.TLD
the resulting update URL would be expanded to
/update?user=myuser&password=mypass&domain=YOURDOMAIN.TLD&myip=1.2.3.4
However, the password is usually never sent in clear text in the HTTP GET URL.
Most DDNS providers instead rely on HTTP basic auth., which inadyn always relays
to the server in the HTTP header of update requests. inadyn.conf v2.1 and later
defaults to HTTPS to protect your credentials, but some providers still do not
support HTTPS.
append-myip = true
Append your current IP to the the DDNS server update path. By default this
setting is false and the hostname is appended. Unless the ddns-path is given
with format specifiers, in which case this setting is unused.
EXAMPLES
Worth noting below is how two different user accounts can use the same DDNS provider, No-
IP.com, by using the concept of instances ':N'.
period = 300
# Dyn.com
provider dyndns.org {
username = account1
password = secret1
hostname = { "my.example.com", "other.example.org" }
}
# FreeDNS. Remember the username must be in lower case
# and password (max 16 chars) is case sensitive.
provider freedns {
username = lower-case-username
password = case-sensitive-pwd
hostname = some.example.com
}
# No-IP.com #1
# With multiple usernames at the same provider, index with :#
provider no-ip.com:1 {
checkip-server = "dynamic.zoneedit.com"
checkip-path = "/checkip.html"
checkip-ssl = false
username = account21
password = secret21
hostname = example.no-ip.com
}
# No-IP.com #2
provider no-ip.com:2 {
username = account22
password = secret22
hostname = another.no-ip.com
}
# Google Domains - notice use of '@' to update root entry
provider domains.google.com:1 {
hostname = @.mydomain.com
username = your_username
password = your_password
}
# Wildcard subdomains - notice the quoutes (required!)
provider domains.google.com:2 {
hostname = "*.mydomain.com"
username = your_username
password = your_password
}
# Loopia
provider loopia.com {
wildcard = true
username = account3
password = secret3
hostname = example.com
}
# ddnss.de
provider ddnss.de {
username = your_username
password = your_password
hostname = your_host.ddnss.de
}
# spdyn.de
provider spdyn.de {
username = your_username
password = your_password
hostname = your_host.spdyn.de
}
# www.strato.com
provider strato.com {
username = your_username
password = your_password
hostname = example.com
}
# dynv6.com update using a custom checkip-command, which works
# if you have access to an Internet-connected interface. Make
# sure to verify the command works on your system first
allow-ipv6 = true # required option for IPv6 atm.
provider default@dynv6.com {
username = your_token
password = not_used
hostname = { my.dynv6.net } # second host with comma
checkip-command = "/sbin/ip -6 addr | grep inet6 | awk -F '[ ]+|/' '{print $3}' | grep -v ^::1 | grep -v ^fe80"
}
# IPv6 account at https://tunnelbroker.net
provider tunnelbroker.net {
username = xyzzy
password = update-key-in-advanced-tab
hostname = tunnel-id
}
# www.freemyip.com
provider freemyip.com {
password = your_token
hostname = your_hostname.freemyip.com
}
# www.cloudxns.net
provider cloudxns.net {
username = your_api_key
password = your_secret_key
hostname = yourhost.example.com
}
# www.dnspod.cn
provider dnspod.cn {
username = your_api_id
password = your_api_token
hostname = yourhost.example.com
}
# www.cloudflare.com
provider cloudflare.com {
username = zone.name
password = api_token # Create a unique custom api token with the following permissions: Zone.Zone - Read, Zone.DNS - Edit.
hostname = hostname.zone.name
ttl = 1 # optional, value of 1 is 'automatic'.
proxied = false # optional.
}
# www.namecheap.com
custom namecheap {
username = YOURDOMAIN.TLD
password = mypass
ddns-server = dynamicdns.park-your-domain.com
ddns-path = "/update?domain=%u&password=%p&host=%h"
hostname = { "@", "www", "test" }
}
# Generic example, check all details for your provider!
custom example {
username = myuser
password = mypass
checkip-server = checkip.example.com
checkip-path = /
checkip-ssl = false
ddns-server = update.example.com
ddns-path = "/update?hostname="
hostname = myhostname.example.net
}
As of Inadyn 1.99.14 the generic plugin can also be used with providers that require the
client's IP in the update request, which for example ⟨https://dyn.com⟩ requires:
# This emulates dyndns.org
custom dyn.com {
username = DYNUSERNAME
password = DYNPASSWORD
ddns-server = members.dyndns.org
ddns-path = "/nic/update?hostname=YOURHOST.dyndns.org&myip="
append-myip = true
hostname = YOURHOST
}
Notice the use of append-myip which differs from above previous examples. Without this
option set the default (backwards compatible) behavior is to append the hostname.
An alternative, and perhaps more intuitive approach introduced in Inadyn v2.0, is to use the
printf(3) like format specifiers mentioned previously. The same example look like this:
# This emulates dyndns.org
custom dyn.com {
ssl = false
username = DYNUSERNAME
password = DYNPASSWORD
ddns-server = members.dyndns.org
ddns-path = "/nic/update?hostname=%h.dyndns.org&myip=%i"
hostname = YOURHOST
}
SEE ALSO
inadyn(8)
The inadyn home page is ⟨https://github.com/troglobit/inadyn⟩
AUTHORS
This manual page was initially written for the Debian GNU/Linux system by Shaul Karl
<mailto:shaul@debian.org>. Currently maintained by Joachim Wiberg
<mailto:troglobit@gmail.com>.