Ubuntu Manpage: fi_verbs - The Verbs Fabric Provider

Provided by: libfabric-dev_1.17.0-3_amd64

NAME

       fi_verbs - The Verbs Fabric Provider

OVERVIEW

       The  verbs  provider  enables  applications  using  OFI  to be run over any verbs hardware
       (Infiniband, iWarp, etc).  It uses the Linux Verbs API for network transport and  provides
       a  translation  of  OFI  calls  to  appropriate  verbs  API  calls.  It uses librdmacm for
       communication management and libibverbs for other control and data transfer operations.

REQUIREMENTS

       To successfully build and install verbs provider  as  part  of  libfabric,  it  needs  the
       following packages: * libibverbs * libibverbs-devel * librdmacm * librdmacm-devel

       You  may also want to look into any OS specific instructions for enabling RDMA.  e.g. RHEL
       has instructions on their documentation for enabling RDMA.

       The IPoIB interface should be configured with a valid IP address.  This is  a  requirement
       from librdmacm.

SUPPORTED FEATURES

The verbs provider supports a subset of OFI features.

Endpoint types
FI_EP_MSG, FI_EP_DGRAM (beta), FI_EP_RDM.

FI_EP_RDM is supported via OFI RxM and RxD utility providers which are layered on top of
verbs. To the app, the provider name string would appear as “verbs;ofi_rxm” or
“verbs;ofi_rxd”. Please refer the man pages for RxM (fi_rxm.7) and RxD (fi_rxd.7) to know
about the capabilities and limitations for the FI_EP_RDM endpoint.

Endpoint capabilities and features
MSG endpoints
FI_MSG, FI_RMA, FI_ATOMIC and shared receive contexts.

DGRAM endpoints
FI_MSG

Modes
Verbs provider requires applications to support the following modes:

FI_EP_MSG endpoint type
• FI_LOCAL_MR / FI_MR_LOCAL mr mode.

• FI_RX_CQ_DATA for applications that want to use RMA. Applications must take
responsibility of posting receives for any incoming CQ data.

Addressing Formats
Supported addressing formats include * MSG and RDM (internal - deprecated) EPs support:
FI_SOCKADDR, FI_SOCKADDR_IN, FI_SOCKADDR_IN6, FI_SOCKADDR_IB * DGRAM supports:
FI_ADDR_IB_UD

Progress
Verbs provider supports FI_PROGRESS_AUTO: Asynchronous operations make forward progress
automatically.

Operation flags
Verbs provider supports FI_INJECT, FI_COMPLETION, FI_REMOTE_CQ_DATA, FI_TRANSMIT_COMPLETE.

Msg Ordering
Verbs provider support the following message ordering:

• Read after Read

• Read after Write

• Read after Send

• Write after Write

• Write after Send

• Send after Write

• Send after Send

and the following completion ordering:

• TX contexts: FI_ORDER_STRICT

• RX contexts: FI_ORDER_DATA

Fork
Verbs provider does not provide fork safety by default. Fork safety can be requested by
setting IBV_FORK_SAFE, or RDMAV_FORK_SAFE. If the system configuration supports the use
of huge pages, it is recommended to set RDMAV_HUGEPAGES_SAFE. See ibv_fork_init(3) for
additional details.

Memory Registration Cache
The verbs provider uses the common memory registration cache functionality that’s part of
libfabric utility code. This speeds up memory registration calls from applications by
caching registrations of frequently used memory regions. Please refer to fi_mr(3): Memory
Registration Cache section for more details.

LIMITATIONS

Memory Regions
Only FI_MR_BASIC mode is supported. Adding regions via s/g list is supported only up to a
s/g list size of 1. No support for binding memory regions to a counter.

Wait objects
Only FI_WAIT_FD wait object is supported only for FI_EP_MSG endpoint type. Wait sets are
not supported.

Resource Management
Application has to make sure CQs are not overrun as this cannot be detected by the
provider.

Unsupported Features
The following features are not supported in verbs provider:

Unsupported Capabilities
FI_NAMED_RX_CTX, FI_DIRECTED_RECV, FI_TRIGGER, FI_RMA_EVENT

Other unsupported features
Scalable endpoints, FABRIC_DIRECT

Unsupported features specific to MSG endpoints
• Counters, FI_SOURCE, FI_TAGGED, FI_PEEK, FI_CLAIM, fi_cancel, fi_ep_alias, shared TX
context, cq_readfrom operations.

• Completion flags are not reported if a request posted to an endpoint completes in error.

Fork
The support for fork in the provider has the following limitations:

• Fabric resources like endpoint, CQ, EQ, etc. should not be used in the forked process.

• The memory registered using fi_mr_reg has to be page aligned since ibv_reg_mr marks the
entire page that a memory region belongs to as not to be re-mapped when the process is
forked (MADV_DONTFORK).

XRC Transport
The XRC transport is intended to be used when layered with the RXM provider and requires
the use of shared receive contexts. See fi_rxm(7). To enable XRC, the following
environment variables must usually be set: FI_VERBS_PREFER_XRC and FI_OFI_RXM_USE_SRX.

RUNTIME PARAMETERS

       The verbs provider checks for the following environment variables.

   Common variables:
       FI_VERBS_TX_SIZE
              Default maximum tx context size (default: 384)

       FI_VERBS_RX_SIZE
              Default maximum rx context size (default: 384)

       FI_VERBS_TX_IOV_LIMIT
              Default maximum tx iov_limit (default: 4).  Note: RDM (internal  -  deprecated)  EP
              type supports only 1

       FI_VERBS_RX_IOV_LIMIT
              Default  maximum  rx  iov_limit (default: 4).  Note: RDM (internal - deprecated) EP
              type supports only 1

       FI_VERBS_INLINE_SIZE
              Default maximum inline size.  Actual inject size returned in fi_info may be greater
              (default: 64)

       FI_VERBS_MIN_RNR_TIMER
              Set min_rnr_timer QP attribute (0 - 31) (default: 12)

       FI_VERBS_CQREAD_BUNCH_SIZE
              The  number  of  entries  to  be  read  from  the  verbs completion queue at a time
              (default: 8).

       FI_VERBS_PREFER_XRC
              Prioritize XRC transport fi_info  before  RC  transport  fi_info  (default:  0,  RC
              fi_info will be before XRC fi_info)

       FI_VERBS_GID_IDX
              The GID index to use (default: 0)

       FI_VERBS_DEVICE_NAME
              Specify a specific verbs device to use by name

       FI_VERBS_USE_DMABUF
              If  supported, try to use ibv_reg_dmabuf_mr first to register dmabuf-based buffers.
              Set it to “no” to always use ibv_reg_mr  which  can  be  helpful  for  testing  the
              functionality  of the dmabuf_peer_mem hooking provider and the corresponding kernel
              driver.  (default: yes)

   Variables specific to MSG endpoints
       FI_VERBS_IFACE
              The prefix or the full name of the network  interface  associated  with  the  verbs
              device (default: ib)

   Variables specific to DGRAM endpoints
       FI_VERBS_DGRAM_USE_NAME_SERVER
              The  option that enables/disables OFI Name Server thread.  The NS thread is used to
              resolve   IP-addresses   to   provider   specific   addresses   (default:   1,   if
              “OMPI_COMM_WORLD_RANK” and “PMI_RANK” environment variables aren’t defined)

       FI_VERBS_NAME_SERVER_PORT
              The  port  on  which  Name  Server thread listens incoming connections and requests
              (default: 5678)

   Environment variables notes
       The fi_info utility would  give  the  up-to-date  information  on  environment  variables:
       fi_info -p verbs -e

Troubleshooting / Known issues

fi_getinfo returns -FI_ENODATA
• Set FI_LOG_LEVEL=info or FI_LOG_LEVEL=debug (if debug build of libfabric is available)
and check if there any errors because of incorrect input parameters to fi_getinfo.

• Check if “fi_info -p verbs” is successful. If that fails the following checklist may
help in ensuring that the RDMA verbs stack is functional:

• If libfabric was compiled, check if verbs provider was built. Building verbs provider
would be skipped if its dependencies (listed in requirements) aren’t available on the
system.

• Verify verbs device is functional:

• Does ibv_rc_pingpong (available in libibverbs) test work?

• Does ibv_devinfo (available in libibverbs) show the device with PORT_ACTIVE
status?

• Check if Subnet Manager (SM) is running on the switch or on one of the nodes in
the cluster.

• Is the cable connected?

• Verify librdmacm is functional:

• Does ucmatose test (available in librdmacm) work?

• Is the IPoIB interface (e.g. ib0) up and configured with a valid IP address?

Other issues
When running an app over verbs provider with Valgrind, there may be reports of memory leak
in functions from dependent libraries (e.g. libibverbs, librdmacm). These leaks are safe
to ignore.

The provider protects CQ overruns that may happen because more TX operations were posted
to endpoints than CQ size. On the receive side, it isn’t expected to overrun the CQ. In
case it happens the application developer should take care not to post excess receives
without draining the CQ. CQ overruns can make the MSG endpoints unusable.

AUTHORS

       OpenFabrics.