Provided by: initramfs-tools-core_0.142ubuntu15.1_all 
NAME
initramfs-tools - an introduction to writing scripts for mkinitramfs
DESCRIPTION
initramfs-tools has one main script and two different sets of subscripts which will be
used during different phases of execution. Each of these will be discussed separately
below with the help of an imaginary tool which performs a frobnication of a lvm partition
prior to mounting the root partition.
Kernel Command Line
The root filesystem used by the kernel is specified by the boot loader as always. The
traditional root=/dev/sda1 style device specification is allowed. If a label is used, as
in root=LABEL=rootPart the initrd will search all available devices for a filesystem with
the appropriate label, and mount that device as the root filesystem. root=UUID=uuidnumber
will mount the partition with that UUID as the root filesystem.
Standard
init= "<path to real init>"
the binary to hand over execution to on the root fs after the initramfs scripts are
done.
initramfs.clear
clear screen at the beginning
initramfs.runsize
The size of the /run tmpfs mount point in bytes (suffixes are supported) or as
percentage of your physical RAM. This parameter is used as the value of the size
mount option to tmpfs. See
https://www.kernel.org/doc/Documentation/filesystems/tmpfs.txt for details. The
default is 10%.
root= "<path to blockdevice>"
the device node to mount as the root file system. The recommended usage is to
specify the UUID as followed "root=UUID=xxx".
rootfstype
set the root file system type.
roottimeout
set timeout in seconds. Determines how long mountroot waits for root to appear.
The default is 30 seconds.
rootdelay
alias for roottimeout.
rootflags
set the file system mount option string.
loop= "<path to image>"
path within the original root file system to loop-mount and use as the real root
file system.
loopfstype
set the loop file system type, if applicable.
loopflags
set the loop file system mount option string, if applicable.
nfsroot
can be either "auto" to try to get the relevant information from DHCP or a string
of the form NFSSERVER:NFSPATH or NFSSERVER:NFSPATH:NFSOPTS. Use root=/dev/nfs for
NFS to kick to in. NFSOPTS can be looked up in nfs(5).
ip tells how to configure the ip address. Allows one to specify an different NFS
server than the DHCP server. See Documentation/filesystems/nfsroot.txt in any
recent Linux source for details. Optional parameter for NFS root.
vlan tells to create a VLAN tagged device. Allows one to configure one or multiple VLAN
tagged devices using the "vlan=$name.$id:$parent" syntax. E.g. "vlan=eth0.1:eth0"
Optional parameter for NFS root.
BOOTIF
is a mac address in pxelinux format with leading "01-" and "-" as separations.
pxelinux passes mac address of network card used to PXE boot on with this bootarg.
boot either local or NFS (affects which initramfs scripts are run, see the
"Subdirectories" section under boot scripts).
resume
The resume hook tries to autodetect the resume partition and uses the first swap
partition as valid guess. It is possible to set the RESUME variable in
/etc/initramfs-tools/conf.d/resume. The boot variable noresume overrides it.
resume_offset
Specify the offset from the partition given by "resume=" at which the swap header
of the swap file is located.
quiet reduces the amount of text output to the console during boot.
ro mounts the rootfs read-only.
rw mounts the rootfs read-write.
blacklist
disables load of specific modules. Use blacklist=module1,module2,module3
bootparameter.
Debug
panic sets an timeout on panic. panic=<sec> is a documented security feature: it
disables the debug shell.
debug generates lots of output. It writes a log to /run/initramfs/initramfs.debug.
Instead when invoked with an arbitrary argument output is written to console. Use
for example "debug=vc".
break spawns a shell in the initramfs image at the chosen phase (top, modules, premount,
mount, mountroot, bottom, init) before actually executing the corresponding scripts
(see the "Boot scripts" section) or action. Multiple phases may be specified,
delimited by commas. The default, if no phase is specified, is "premount". Beware
that if both "panic" and "break" are present, initramfs will not spawn any shells
but reboot instead.
netconsole
loads netconsole linux modules with the chosen args.
all_generic_ide
loads generic IDE/ATA chipset support on boot.
SCRIPTS
Valid boot and hook scripts names consist solely of alphabetics, numerics, dashes and
underscores. Other scripts are discarded.
Configuration hook scripts
These are used to override the user configuration where necessary, for example to force
use of busybox instead of klibc utilities.
Hook scripts
These are used when an initramfs image is created and not included in the image itself.
They can however cause files to be included in the image. Hook scripts are executed under
errexit. Thus a hook script can abort the mkinitramfs build on possible errors (exitcode
!= 0).
Boot scripts
These are included in the initramfs image and normally executed during kernel boot in the
early user-space before the root partition has been mounted.
CONFIGURATION HOOK SCRIPTS
Configuration hook scripts can be found in /usr/share/initramfs-tools/conf-hooks.d. They
are sourced by mkinitramfs after the configuration files in /etc and before running any
hook scripts. They can override any of the variables documented in initramfs.conf(5), but
this should be done only if absolutely necessary. For example, if a package's boot script
requires commands not provided by klibc-utils, it should also install a configuration hook
that sets BUSYBOX=y.
HOOK SCRIPTS
Hooks can be found in two places: /usr/share/initramfs-tools/hooks and /etc/initramfs-
tools/hooks. They are executed during generation of the initramfs-image and are
responsible for including all the necessary components in the image itself. No guarantees
are made as to the order in which the different scripts are executed unless the prereqs
are setup in the script. Please notice that PREREQ is only honored inside a single
directory. So first the scripts in /usr/share/initramfs-tools are ordered according to
their PREREQ values and executed. Then all scripts in /etc/initramfs-tools are ordered
according to their PREREQ values and executed. This mean that currently there is no
possibility to have a local script (/etc/initramfs-tools) get executed before one from the
package (/usr/share/initramfs-tools).
If a hook script requires configuration beyond the exported variables listed below, it
should read a private configuration file that is separate from the /etc/initramfs-tools
directory. It must not read initramfs-tools configuration files directly.
Header
In order to support prereqs, each script should begin with the following lines:
#!/bin/sh
PREREQ=""
prereqs()
{
echo "$PREREQ"
}
case $1 in
prereqs)
prereqs
exit 0
;;
esac
. /usr/share/initramfs-tools/hook-functions
# Begin real processing below this line
For example, if you are writing a new hook script which relies on lvm, the line starting
with PREREQ should be changed to PREREQ="lvm" which will ensure that the lvm hook script
is run before your custom script.
Help functions
/usr/share/initramfs-tools/hook-functions contains a number of functions which deal with
some common tasks in a hook script:
manual_add_modules adds a module (and any modules which it depends on) to the
initramfs image.
Example: manual_add_modules isofs
add_modules_from_file reads a file containing a list of modules (one per line) to
be added to the initramfs image. The file can contain comments (lines starting with
#) and arguments to the modules by writing the arguments on the same line as the
name of the module.
Example: add_modules_from_file /tmp/modlist
force_load adds a module (and its dependencies) to the initramfs image and also
unconditionally loads the module during boot. Also supports passing arguments to
the module by listing them after the module name.
Example: force_load cdrom debug=1
copy_modules_dir copies an entire module directory from /lib/modules/KERNELVERSION/
into the initramfs image.
Example: copy_modules_dir kernel/drivers/ata
Including binaries
If you need to copy an executable or shared library to the initramfs module, use a command
like this:
copy_exec /sbin/mdadm /sbin
mkinitramfs will automatically detect which libraries it depends on and copy them to the
initramfs. This means that most executables, unless compiled with klibc, will
automatically include glibc in the image which will increase its size by several hundred
kilobytes.
Including a system firmware preimage (early initramfs)
If you need to prepend data to the initramfs image, you need to prepare it in a file, and
call the prepend_earlyinitramfs function. The file can be disposed of as soon as the
function returns.
Example:
TEMP_FILE=$(mktemp ...)
...
prepend_earlyinitramfs ${TEMP_FILE}
rm -f ${TEMP_FILE}
Exported variables
mkinitramfs sets several variables for the hook scripts environment.
MODULESDIR
corresponds to the linux modules dir.
version
is the $(uname -r) linux version against mkinitramfs is run.
CONFDIR
is the path of the used initramfs-tools configurations.
DESTDIR
is the root path of the newly build initramfs.
DPKG_ARCH
allows arch specific hook additions.
verbose
corresponds to the verbosity of the update-initramfs run.
BUSYBOX, MODULES
are as described in initramfs.conf(5).
BUSYBOXDIR
is the directory where busybox utilities should be installed from, or empty if
busybox is not being used.
BOOT SCRIPTS
Similarly to hook scripts, boot scripts can be found in two places /usr/share/initramfs-
tools/scripts/ and /etc/initramfs-tools/scripts/. There are a number of subdirectories to
these two directories which control the boot stage at which the scripts are executed.
Header
Like for hook scripts, there are no guarantees as to the order in which the different
scripts in one subdirectory (see "Subdirectories" below) are executed. In order to define
a certain order, a similar header as for hook scripts should be used:
#!/bin/sh
PREREQ=""
prereqs()
{
echo "$PREREQ"
}
case $1 in
prereqs)
prereqs
exit 0
;;
esac
Where PREREQ is modified to list other scripts in the same subdirectory if necessary.
Help functions
A number of functions (mostly dealing with output) are provided to boot scripts in
/scripts/functions :
log_success_msg Logs a success message
Example: log_success_msg "Frobnication successful"
log_failure_msg Logs a failure message
Example: log_failure_msg "Frobnication component froobz missing"
log_warning_msg Logs a warning message
Example: log_warning_msg "Only partial frobnication possible"
log_begin_msg Logs a message that some processing step has begun
log_end_msg Logs a message that some processing step is finished
Example:
log_begin_msg "Frobnication begun"
# Do something
log_end_msg
panic Logs an error message and executes a shell in the initramfs image to allow
the user to investigate the situation.
Example: panic "Frobnication failed"
add_mountroot_fail_hook NN-name Deprecated: This function is now a stub which is
effectively a no-op. It will be removed in a future version; please remove
mountroot failure hooks from existing packages accordingly.
Subdirectories
Both /usr/share/initramfs-tools/scripts and /etc/initramfs-tools/scripts contains the
following subdirectories.
init-top the scripts in this directory are the first scripts to be executed after
sysfs and procfs have been mounted. It also runs the udev hook for populating the
/dev tree (udev will keep running until init-bottom).
init-premount happens after modules specified by hooks and /etc/initramfs-
tools/modules have been loaded.
local-top OR nfs-top After these scripts have been executed, the root device node
is expected to be present (local) or the network interface is expected to be usable
(NFS).
local-block These scripts are called with the name of a local block device. After
these scripts have been executed, that device node should be present. If the
local-top or local-block scripts fail to create the wanted device node, the local-
block scripts will be called periodically to try again.
local-premount OR nfs-premount are run after the sanity of the root device has been
verified (local) or the network interface has been brought up (NFS), but before the
actual root fs has been mounted.
local-bottom OR nfs-bottom are run after the rootfs has been mounted (local) or the
NFS root share has been mounted.
init-bottom are the last scripts to be executed before procfs and sysfs are moved
to the real rootfs and execution is turned over to the init binary which should now
be found in the mounted rootfs. udev is stopped.
Boot parameters
/conf/param.conf allows boot scripts to change exported variables that are listed
on top of init. Write the new values to it. It will be sourced after an boot script
run if it exists.
EXAMPLES
Hook script
An example hook script would look something like this (and would usually be placed in
/etc/initramfs-tools/hooks/frobnicate):
#!/bin/sh
# Example frobnication hook script
PREREQ="lvm"
prereqs()
{
echo "$PREREQ"
}
case $1 in
prereqs)
prereqs
exit 0
;;
esac
. /usr/share/initramfs-tools/hook-functions
# Begin real processing below this line
if [ ! -x "/sbin/frobnicate" ]; then
exit 0
fi
force_load frobnicator interval=10
copy_exec /sbin/frobnicate /sbin
exit 0
Boot script
An example boot script would look something like this (and would usually be placed in
/etc/initramfs-tools/scripts/local-top/frobnicate):
#!/bin/sh
# Example frobnication boot script
PREREQ="lvm"
prereqs()
{
echo "$PREREQ"
}
case $1 in
prereqs)
prereqs
exit 0
;;
esac
. /scripts/functions
# Begin real processing below this line
if [ ! -x "/sbin/frobnicate" ]; then
panic "Frobnication executable not found"
fi
if [ ! -e "/dev/mapper/frobb" ]; then
panic "Frobnication device not found"
fi
log_begin_msg "Starting frobnication"
/sbin/frobnicate "/dev/mapper/frobb" || panic "Frobnication failed"
log_end_msg
exit 0
Exported variables
init sets several variables for the boot scripts environment.
ROOT corresponds to the root boot option. Advanced boot scripts like cryptsetup or
live-initramfs need to play tricks. Otherwise keep it alone.
ROOTDELAY, ROOTFLAGS, ROOTFSTYPE, IP
corresponds to the rootdelay, rootflags, rootfstype or ip boot option. Use of
ROOTDELAY is deprecated; you should implement a local-block boot script rather than
delaying or polling.
DPKG_ARCH
allows arch specific boot actions.
blacklist, panic, quiet, resume, noresume, resume_offset
set according relevant boot option.
break Useful for manual intervention during setup and coding an boot script.
REASON
Argument passed to the panic helper function. Use to find out why you landed in
the initramfs shell.
init passes the path to init(8) usually /sbin/init.
readonly
is the default for mounting the root corresponds to the ro bootarg. Overridden by
rw bootarg.
rootmnt
is the path where root gets mounted usually /root.
debug indicates that a debug log is captured for further investigation.
UPDATING THE INITRAMFS FROM ANOTHER PACKAGE
Package maintainer scripts should not run update-initramfs directly. A package that
installs hooks for initramfs-tools should include a triggers file containing:
activate-noawait update-initramfs
Kernel packages must call the kernel hooks as documented in the Debian Kernel Handbook.
A package that requires an initramfs to function, but is not a kernel package, should
include a triggers file containing:
activate-await update-initramfs
KERNEL HOOKS
initramfs-tools includes hook scripts that are called by kernel packages on installation
and removal, so that an initramfs is automatically created, updated or deleted as
necessary. The hook scripts do nothing if the environment variable INITRD is set to No.
This will be the case for kernel packages built with make deb-pkg and with
CONFIG_BLK_DEV_INITRD not set in the kernel config, or built with make-kpkg and not using
the --initrd option.
DEBUG
It is easy to check the generated initramfs for its content. One may need to double-check
if it contains the relevant binaries, libs or modules:
lsinitramfs /boot/initrd.img-3.16-3-amd64
FILES
/run/initramfs/fsck.log
Log of fsck commands run within the initramfs, with their output.
/run/initramfs/fsck-root
Exists only if fsck ran successfully for the root filesystem.
/run/initramfs/fsck-usr
Exists only if fsck ran successfully for the /usr filesystem.
AUTHOR
The initramfs-tools are written by Maximilian Attems <maks@debian.org>, Jeff Bailey
<jbailey@raspberryginger.com> and numerous others.
This manual was written by David Härdeman <david@hardeman.nu>, updated by Maximilian
Attems <maks@debian.org>.
SEE ALSO
initramfs.conf(5), mkinitramfs(8), update-initramfs(8), lsinitramfs(8).