Provided by: diod_1.0.24-5_amd64 
NAME
mount.diod - mount diod file systems
SYNOPSIS
mount.diod [OPTIONS] host[:aname] dir [-o options]
DESCRIPTION
mount.diod is the mount utility for the distributed I/O daemon, which is an I/O forwarding
service for Linux clusters built upon the Linux 9p file system.
mount.diod performs two main tasks: 1) connect and authenticate to the diod server, and 2)
issue the mount(2) system call with appropriate mount options.
Authentication with the diod server takes place in user space. The connected (and
authenticated) file descriptor is passed as a mount option to the kernel 9p file system
This command requires root to execute the mount(2) system call.
The 9p file system must support the 9P2000.L protocol variant, e.g. kernel 2.6.38 or
above.
The host portion of the mount spec may optionally be supplied in hostlist format, e.g.
host1,host2,host3:aname or host[1-3]:aname, in which case hosts are tried in order until a
successful connection is obtained. Post-connect mount errors are immediately fatal.
If the host portion of the mount spec begins with a forward-slash (/), it refers to the
path to a UNIX domain socket.
COMMAND LINE OPTIONS
-f, --fake-mount
Do everything except the mount system call.
-n, --no-mtab
Do not update the system mtab.
-v, --verbose
Set verbose mode.
-o, --options opt[,opt,...]
Set mount options (see below).
MOUNT OPTIONS
The following file system specific mount options are handled by mount.diod.
aname=name
The aname is the path of the exported file system on the server. It can be
specified in the mount spec in host:aname format like NFS, or it can be specified
with this option. diod will not allow an attach to an empty aname. diod has a
built-in synthetic control file system that can be mounted with aname of ctl. Note
that "ctl" must be explicitly exported.
uname=name
The user name to authenticate to the diod server. The default is uname=root.
access=mode
Select the access mode. access=user (default) causes the mount to support multiple
users, and requires root authentication. access=<uid> restricts access at the
client to only the specified user.
port=n Connect to the diod server on the specified port. The default is the IANA-assigned
9pfs port 564.
trans=name
Select a transport. mount.diod only supports trans=fd because of its strategy for
authentication.
rfdno=n,wfdno=n
The file descriptor for reading and writing with trans=fd. If set, mount.diod
assumes this file descriptor is already connected to a diod server and ignores host
in the device specification, and the port=n option.
msize=n
The msize is the max 9P packet payload size. The default is 65512 (65536-24)
version=name
Select 9P protocol version. diod only supports 9p2000.L.
cache=mode
Specify a caching policy. By default, no caches are used. If cache=loose, no
attempts are made at consistency. This mode is intended for exclusive, read-only
mounts. If cache=fscache, use FS-Cache for a persistent, read-only cache backend.
cachetag
In the context of cache=fscache, select the cache tag to use for this session.
Cache tags for existing cache sessions are listed in /sys/fs/9p/caches.
nodevmap
Do not map special files. Represent them as normal files. This can be used to
share devices/named pipes/sockets between hosts.
debug=n
Specifies debug level for the kernel 9p module. The debug level is a bitmask.
0x01 = display verbose error messages
0x02 = developer debug (DEBUG_CURRENT)
0x04 = display 9p trace
0x08 = display VFS trace
0x10 = display Marshalling debug
0x20 = display RPC debug
0x40 = display transport debug
0x80 = display allocation debug
0x100 = display protocol message debug
0x200 = display Fid debug
0x400 = display packet debug
0x800 = display fscache tracing debug
The debug level is global, i.e. it applies to all 9P file systems and it remains
set after the file system is unmounted. The default is debug=0.
SEE ALSO
diod (8)