Ubuntu Manpage: nsd-control, nsd-control-setup - NSD remote server control utility.

NAME

       nsd-control, nsd-control-setup - NSD remote server control utility.

SYNOPSIS

       nsd-control [-c cfgfile] [-s server] command

DESCRIPTION

       nsd-control  performs  remote  administration  on  the  nsd(8)  DNS  server.  It reads the
       configuration file, contacts the nsd server over SSL, sends the command and  displays  the
       result.

       The available options are:

       -h     Show the version and commandline option help.

       -c cfgfile
              The  config  file  to  read  with  settings.   If not given the default config file
              /etc/nsd/nsd.conf is used.

       -s server[@port]
              IPv4 or IPv6 address of the server to contact.  If not given, the address  is  read
              from the config file.

COMMANDS

There are several commands that the server understands.

start Start the server. Simply execs nsd(8). The nsd executable is not searched for in
the PATH set in the environment. Instead the default location relative to the
installation prefix specified at compile-time. The executable location can be
overridden by setting NSD_PATH in the environment. It is started with the config
file specified using -c or the default config file.

stop Stop the server. The server daemon exits.

reload [<zone>]
Reload zonefiles and reopen logfile. Without argument reads changed zonefiles.
With argument reads the zonefile for the given zone and loads it.

reconfig
Reload nsd.conf and apply changes to TSIG keys and configuration patterns, and
apply the changes to add and remove zones that are mentioned in the config. Other
changes are not applied, such as listening ip address and port and chroot, also
per-zone statistics are not applied. The pattern updates means that the
configuration options for zones (request-xfr, zonefile, notify, ...) are updated.
Also new patterns are available for use with the addzone command.

repattern
Same as the reconfig option.

log_reopen
Reopen the logfile, for log rotate that wants to move the logfile away and create a
new logfile. The log can also be reopened with kill -HUP (which also reloads all
zonefiles).

status Display server status. Exit code 3 if not running (the connection to the port is
refused), 1 on error, 0 if running.

stats Output a sequence of name=value lines with statistics information, requires NSD to
be compiled with this option enabled.

stats_noreset
Same as stats, but does not zero the counters.

addzone <zone name> <pattern name>
Add a new zone to the running server. The zone is added to the zonelist file on
disk, so it stays after a restart. The pattern name determines the options for the
new zone. For slave zones a zone transfer is immediately attempted. For zones
with a zonefile, the zone file is attempted to be read in.

delzone <zone name>
Remove the zone from the running server. The zone is removed from the zonelist
file on disk, from the nsd.db file and from the memory. If it had a zonefile, this
remains (but may be outdated). Zones configured inside nsd.conf itself cannot be
removed this way because the daemon does not write to the nsd.conf file, you need
to add such zones to the zonelist file to be able to delete them with the delzone
command.

changezone <zone name> <pattern name>
Change a zone to use the pattern for options. The zone is deleted and added in one
operation, changing it to use the new pattern for the zone options. Zones
configured in nsd.conf cannot be changed like this, instead edit the nsd.conf (or
the included file in nsd.conf) and reconfig.

addzones
Add zones read from stdin of nsd-control. Input is read per line, with name space
patternname on a line. For bulk additions.

delzones
Remove zones read from stdin of nsd-control. Input is one name per line. For bulk
removals.

write [<zone>]
Write zonefiles to disk, or the given zonefile to disk. Zones that have changed
(via AXFR or IXFR) are written, or if the zonefile has not been created yet then it
is created. Directory components of the zonefile path are created if necessary.
With argument that zone is written if it was modified, without argument, all
modified zones are written.

notify [<zone>]
Send NOTIFY messages to slave servers. Sends to the IP addresses configured in the
'notify:' lists for the master zones hosted on this server. Usually NSD sends
NOTIFY messages right away when a master zone serial is updated. If a zone is
given, notifies are sent for that zone. These slave servers are supposed to
initiate a zone transfer request later (to this server or another master), this can
be allowed via the 'provide-xfr:' acl list configuration. With argument that zone
is processed, without argument, all zones are processed.

transfer [<zone>]
Attempt to update slave zones that are hosted on this server by contacting the
masters. The masters are configured via 'request-xfr:' lists. If a zone is given,
that zone is updated. Usually NSD receives a NOTIFY from the masters (configured
via 'allow-notify:' acl list) that a new zone serial has to be transferred. For
zones with no content, NSD may have backed off from asking often because the
masters did not respond, but this command will reset the backoff to its initial
timeout, for frequent retries. With argument that zone is transferred, without
argument, all zones are transferred.

force_transfer [<zone>]
Force update slave zones that are hosted on this server. Even if the master hosts
the same serial number of the zone, a full AXFR is performed to fetch it. If you
want to use IXFR and check that the serial number increases, use the 'transfer'
command. With argument that zone is transferred, without argument, all zones are
transferred.

zonestatus [<zone>]
Print state of the zone, the serial numbers and since when they have been acquired.
Also prints the notify action (to which server), and zone transfer (and from which
master) if there is activity right now. The state of the zone is printed as:
'master' (master zones), 'ok' (slave zone is up-to-date), 'expired' (slave zone has
expired), 'refreshing' (slave zone has transfers active). The serial numbers
printed are the 'served-serial' (currently active), the 'commit-serial' (is in
reload), the 'notified-serial' (got notify, busy fetching the data). The serial
numbers are only printed if such a serial number is available. With argument that
zone is printed, without argument, all zones are printed.

serverpid
Prints the PID of the server process. This is used for statistics (and only works
when NSD is compiled with statistics enabled). This pid is not for sending unix
signals, use the pid from nsd.pid for that, that pid is also stable.

verbosity <number>
Change logging verbosity.

print_tsig [<key_name>]
print the secret and algorithm for the TSIG key with that name. Or list all the
tsig keys with their name, secret and algorithm.

update_tsig <name> <secret>
Change existing TSIG key with name to the new secret. The secret is a base64
encoded string. The changes are only in-memory and are gone next restart, for
lasting changes edit the nsd.conf file or a file included from it.

add_tsig <name> <secret> [algo]
Add a new TSIG key with the given name, secret and algorithm. Without algorithm a
default (hmac-sha256) algorithm is used. The secret is a base64 encoded string.
The changes are only in-memory and are gone next restart, for lasting changes edit
the nsd.conf file or a file included from it.

assoc_tsig <zone> <key_name>
Associate the zone with the given tsig. The access control lists for notify,
allow-notify, provide-xfr and request-xfr are adjusted to use the given key.

del_tsig <key_name>
Delete the TSIG key with the given name. Prints error if the key is still in use
by some zone. The changes are only in-memory and are gone next restart, for
lasting changes edit the nsd.conf file or a file included from it.

add_cookie_secret <secret>
Add or replace a cookie secret persistently. <secret> needs to be an 128 bit hex
string.

Cookie secrets can be either active or staging. Active cookie secrets are used to
create DNS Cookies, but verification of a DNS Cookie succeeds with any of the
active or staging cookie secrets. The state of the current cookie secrets can be
printed with the print_cookie_secrets command.

When there are no cookie secrets configured yet, the <secret> is added as active.
If there is already an active cookie secret, the <secret> is added as staging or
replacing an existing staging secret.

To "roll" a cookie secret used in an anycast set. The new secret has to be added as
staging secret to all nodes in the anycast set. When all nodes can verify DNS
Cookies with the new secret, the new secret can be activated with the
activate_cookie_secret command. After all nodes have the new secret active for at
least one hour, the previous secret can be dropped with the drop_cookie_secret
command.

Persistence is accomplished by writing to a file which if configured with the
cookie-secret-file option in the server section of the config file. The default
value for that is: /etc/nsd/nsd_cookiesecrets.txt .

drop_cookie_secret
Drop the staging cookie secret.

activate_cookie_secret
Make the current staging cookie secret active, and the current active cookie secret
staging.

print_cookie_secrets
Show the current configured cookie secrets with their status.

EXIT CODE

       The nsd-control program exits with status code 1 on error, 0 on success.

SET UP

       The setup requires a self-signed certificate and private keys  for  both  the  server  and
       client.   The  script  nsd-control-setup  generates these in the default run directory, or
       with -d in another directory.  If you change the access control  permissions  on  the  key
       files  you  can  decide  who  can  use nsd-control, by default owner and group but not all
       users.  The script preserves private keys present in the directory.

STATISTIC COUNTERS

The stats command shows a number of statistic counters.

num.queries
number of queries received (the tls, tcp and udp queries added up).

serverX.queries
number of queries handled by the server process. The number of server processes is
set with the config statement server-count.

time.boot
uptime in seconds since the server was started. With fractional seconds.

time.elapsed
time since the last stats report, in seconds. With fractional seconds. Can be
zero if polled quickly and the previous stats command resets the counters, so that
the next gets a fully zero, and zero elapsed time, report.

size.db.disk
size of nsd.db on disk, in bytes.

size.db.mem
size of the DNS database in memory, in bytes.

size.xfrd.mem
size of memory for zone transfers and notifies in xfrd process, excludes TSIG data,
in bytes.

size.config.disk
size of zonelist file on disk, excludes the nsd.conf size, in bytes.

size.config.mem
size of config data in memory, kept twice in server and xfrd process, in bytes.

num.type.X
number of queries with this query type.

num.opcode.X
number of queries with this opcode.

num.class.X
number of queries with this query class.

num.rcode.X
number of answers that carried this return code.

num.edns
number of queries with EDNS OPT.

num.ednserr
number of queries which failed EDNS parse.

num.udp
number of queries over UDP ip4.

num.udp6
number of queries over UDP ip6.

num.tcp
number of connections over TCP ip4.

num.tcp6
number of connections over TCP ip6.

num.tls
number of connections over TLS ip4. TLS queries are not part of num.tcp.

num.tls6
number of connections over TLS ip6. TLS queries are not part of num.tcp6.

num.answer_wo_aa
number of answers with NOERROR rcode and without AA flag, this includes the
referrals.

num.rxerr
number of queries for which the receive failed.

num.txerr
number of answers for which the transmit failed.

num.raxfr
number of AXFR requests from clients (that got served with reply).

num.rixfr
number of IXFR requests from clients (that got served with reply).

num.truncated
number of answers with TC flag set.

num.dropped
number of queries that were dropped because they failed sanity check.

zone.master
number of master zones served. These are zones with no 'request-xfr:' entries.

zone.slave
number of slave zones served. These are zones with 'request-xfr' entries.

FILES

       /etc/nsd/nsd.conf
              nsd configuration file.

       /etc/nsd
              directory  with  private  keys (nsd_server.key and nsd_control.key) and self-signed
              certificates (nsd_server.pem and nsd_control.pem).