Provided by: libpam-modules_1.5.2-6ubuntu1.1_amd64 bug

NAME

       pam_unix - Module for traditional password authentication

SYNOPSIS

       pam_unix.so [...]

DESCRIPTION

       This is the standard Unix authentication module. It uses standard calls from the system's
       libraries to retrieve and set account information as well as authentication. Usually this
       is obtained from the /etc/passwd and the /etc/shadow file as well if shadow is enabled.

       The account component performs the task of establishing the status of the user's account
       and password based on the following shadow elements: expire, last_change, max_change,
       min_change, warn_change. In the case of the latter, it may offer advice to the user on
       changing their password or, through the PAM_AUTHTOKEN_REQD return, delay giving service to
       the user until they have established a new password. The entries listed above are
       documented in the shadow(5) manual page. Should the user's record not contain one or more
       of these entries, the corresponding shadow check is not performed.

       The authentication component performs the task of checking the users credentials
       (password). The default action of this module is to not permit the user access to a
       service if their official password is blank.

       A helper binary, unix_chkpwd(8), is provided to check the user's password when it is
       stored in a read protected database. This binary is very simple and will only check the
       password of the user invoking it. It is called transparently on behalf of the user by the
       authenticating component of this module. In this way it is possible for applications like
       xlock(1) to work without being setuid-root. The module, by default, will temporarily turn
       off SIGCHLD handling for the duration of execution of the helper binary. This is generally
       the right thing to do, as many applications are not prepared to handle this signal from a
       child they didn't know was fork()d. The noreap module argument can be used to suppress
       this temporary shielding and may be needed for use with certain applications.

       The maximum length of a password supported by the pam_unix module via the helper binary is
       PAM_MAX_RESP_SIZE - currently 512 bytes. The rest of the password provided by the
       conversation function to the module will be ignored.

       The password component of this module performs the task of updating the user's password.
       The default encryption hash is taken from the ENCRYPT_METHOD variable from /etc/login.defs

       The session component of this module logs when a user logins or leave the system.

       Remaining arguments, supported by others functions of this module, are silently ignored.
       Other arguments are logged as errors through syslog(3).

OPTIONS

       debug
           Turns on debugging via syslog(3).

       audit
           A little more extreme than debug.

       quiet
           Turns off informational messages namely messages about session open and close via
           syslog(3).

       nullok
           The default action of this module is to not permit the user access to a service if
           their official password is blank. The nullok argument overrides this default.

       nullresetok
           Allow users to authenticate with blank password if password reset is enforced even if
           nullok is not set. If password reset is not required and nullok is not set the
           authentication with blank password will be denied.

       try_first_pass
           Before prompting the user for their password, the module first tries the previous
           stacked module's password in case that satisfies this module as well.

       use_first_pass
           The argument use_first_pass forces the module to use a previous stacked modules
           password and will never prompt the user - if no password is available or the password
           is not appropriate, the user will be denied access.

       nodelay
           This argument can be used to discourage the authentication component from requesting a
           delay should the authentication as a whole fail. The default action is for the module
           to request a delay-on-failure of the order of two second.

       use_authtok
           When password changing enforce the module to set the new password to the one provided
           by a previously stacked password module (this is used in the example of the stacking
           of the pam_passwdqc module documented below).

       authtok_type=type
           This argument can be used to modify the password prompt when changing passwords to
           include the type of the password. Empty by default.

       nis
           NIS RPC is used for setting new passwords.

       remember=n
           The last n passwords for each user are saved in /etc/security/opasswd in order to
           force password change history and keep the user from alternating between the same
           password too frequently. The MD5 password hash algorithm is used for storing the old
           passwords. Instead of this option the pam_pwhistory module should be used.

       shadow
           Try to maintain a shadow based system.

       md5
           When a user changes their password next, encrypt it with the MD5 algorithm.

       bigcrypt
           When a user changes their password next, encrypt it with the DEC C2 algorithm.

       sha256
           When a user changes their password next, encrypt it with the SHA256 algorithm. The
           SHA256 algorithm must be supported by the crypt(3) function.

       sha512
           When a user changes their password next, encrypt it with the SHA512 algorithm. The
           SHA512 algorithm must be supported by the crypt(3) function.

       blowfish
           When a user changes their password next, encrypt it with the blowfish algorithm. The
           blowfish algorithm must be supported by the crypt(3) function.

       gost_yescrypt
           When a user changes their password next, encrypt it with the gost-yescrypt algorithm.
           The gost-yescrypt algorithm must be supported by the crypt(3) function.

       yescrypt
           When a user changes their password next, encrypt it with the yescrypt algorithm. The
           yescrypt algorithm must be supported by the crypt(3) function.

       rounds=n
           Set the optional number of rounds of the SHA256, SHA512, blowfish, gost-yescrypt, and
           yescrypt password hashing algorithms to n.

       broken_shadow
           Ignore errors reading shadow information for users in the account management module.

       minlen=n
           Set a minimum password length of n characters. The default value is 6. The maximum for
           DES crypt-based passwords is 8 characters.

       obscure
           Enable some extra checks on password strength. These checks are based on the "obscure"
           checks in the original shadow package. The behavior is similar to the pam_cracklib
           module, but for non-dictionary-based checks. The following checks are implemented:

           Palindrome
               Verifies that the new password is not a palindrome of (i.e., the reverse of) the
               previous one.

           Case Change Only
               Verifies that the new password isn't the same as the old one with a change of
               case.

           Similar
               Verifies that the new password isn't too much like the previous one.

           Simple
               Is the new password too simple? This is based on the length of the password and
               the number of different types of characters (alpha, numeric, etc.) used.

           Rotated
               Is the new password a rotated version of the old password? (E.g., "billy" and
               "illyb")

       no_pass_expiry
           When set ignore password expiration as defined by the shadow entry of the user. The
           option has an effect only in case pam_unix was not used for the authentication or it
           returned authentication failure meaning that other authentication source or method
           succeeded. The example can be public key authentication in sshd. The module will
           return PAM_SUCCESS instead of eventual PAM_NEW_AUTHTOK_REQD or PAM_AUTHTOK_EXPIRED.

       Invalid arguments are logged with syslog(3).

MODULE TYPES PROVIDED

       All module types (account, auth, password and session) are provided.

RETURN VALUES

       PAM_IGNORE
           Ignore this module.

EXAMPLES

       An example usage for /etc/pam.d/login would be:

           # Authenticate the user
           auth       required   pam_unix.so
           # Ensure users account and password are still active
           account    required   pam_unix.so
           # Change the user's password, but at first check the strength
           # with pam_passwdqc(8)
           password   required   pam_passwdqc.so config=/etc/passwdqc.conf
           password   required   pam_unix.so use_authtok nullok yescrypt
           session    required   pam_unix.so

SEE ALSO

       login.defs(5), pam.conf(5), pam.d(5), pam(7)

AUTHOR

       pam_unix was written by various people.