Provided by: puppet-agent_7.23.0-1_all 
NAME
puppet-agent - The puppet agent daemon
SYNOPSIS
Retrieves the client configuration from the Puppet master and applies it to the local
host.
This service may be run as a daemon, run periodically using cron (or something similar),
or run interactively for testing purposes.
USAGE
puppet agent [--certname NAME] [-D|--daemonize|--no-daemonize] [-d|--debug]
[--detailed-exitcodes] [--digest DIGEST] [--disable [MESSAGE]] [--enable] [--fingerprint]
[-h|--help] [-l|--logdest syslog|eventlog|ABS FILEPATH|console] [--serverport PORT]
[--noop] [-o|--onetime] [--sourceaddress IP_ADDRESS] [-t|--test] [-v|--verbose]
[-V|--version] [-w|--waitforcert SECONDS]
DESCRIPTION
This is the main puppet client. Its job is to retrieve the local machine's configuration
from a remote server and apply it. In order to successfully communicate with the remote
server, the client must have a certificate signed by a certificate authority that the
server trusts; the recommended method for this, at the moment, is to run a certificate
authority as part of the puppet server (which is the default). The client will connect and
request a signed certificate, and will continue connecting until it receives one.
Once the client has a signed certificate, it will retrieve its configuration and apply it.
USAGE NOTES
'puppet agent' does its best to find a compromise between interactive use and daemon use.
If you run it with no arguments and no configuration, it goes into the background,
attempts to get a signed certificate, and retrieves and applies its configuration every 30
minutes.
Some flags are meant specifically for interactive use -- in particular, 'test', 'tags' and
'fingerprint' are useful.
'--test' runs once in the foreground with verbose logging, then exits. It also exits if it
can't get a valid catalog. --test includes the '--detailed-exitcodes' option by default
and exits with one of the following exit codes:
○ 0: The run succeeded with no changes or failures; the system was already in the
desired state.
○ 1: The run failed, or wasn't attempted due to another run already in progress.
○ 2: The run succeeded, and some resources were changed.
○ 4: The run succeeded, and some resources failed.
○ 6: The run succeeded, and included both changes and failures.
'--tags' allows you to specify what portions of a configuration you want to apply. Puppet
elements are tagged with all of the class or definition names that contain them, and you
can use the 'tags' flag to specify one of these names, causing only configuration elements
contained within that class or definition to be applied. This is very useful when you are
testing new configurations -- for instance, if you are just starting to manage 'ntpd', you
would put all of the new elements into an 'ntpd' class, and call puppet with '--tags
ntpd', which would only apply that small portion of the configuration during your testing,
rather than applying the whole thing.
'--fingerprint' is a one-time flag. In this mode 'puppet agent' runs once and displays on
the console (and in the log) the current certificate (or certificate request) fingerprint.
Providing the '--digest' option allows you to use a different digest algorithm to generate
the fingerprint. The main use is to verify that before signing a certificate request on
the master, the certificate request the master received is the same as the one the client
sent (to prevent against man-in-the-middle attacks when signing certificates).
'--skip_tags' is a flag used to filter resources. If this is set, then only resources not
tagged with the specified tags will be applied. Values must be comma-separated.
OPTIONS
Note that any Puppet setting that's valid in the configuration file is also a valid long
argument. For example, 'server' is a valid setting, so you can specify '--server
servername' as an argument. Boolean settings accept a '--no-' prefix to turn off a
behavior, translating into '--setting' and '--no-setting' pairs, such as --daemonize and
--no-daemonize.
See the configuration file documentation at
https://puppet.com/docs/puppet/latest/configuration.html for the full list of acceptable
settings. A commented list of all settings can also be generated by running puppet agent
with '--genconfig'.
○ --certname: Set the certname (unique ID) of the client. The master reads this unique
identifying string, which is usually set to the node's fully-qualified domain name, to
determine which configurations the node will receive. Use this option to debug setup
problems or implement unusual node identification schemes. (This is a Puppet setting,
and can go in puppet.conf.)
○ --daemonize: Send the process into the background. This is the default. (This is a
Puppet setting, and can go in puppet.conf. Note the special 'no-' prefix for boolean
settings on the command line.)
○ --no-daemonize: Do not send the process into the background. (This is a Puppet
setting, and can go in puppet.conf. Note the special 'no-' prefix for boolean settings
on the command line.)
○ --debug: Enable full debugging.
○ --detailed-exitcodes: Provide extra information about the run via exit codes; works
only if '--test' or '--onetime' is also specified. If enabled, 'puppet agent' uses the
following exit codes:
0: The run succeeded with no changes or failures; the system was already in the
desired state.
1: The run failed, or wasn't attempted due to another run already in progress.
2: The run succeeded, and some resources were changed.
4: The run succeeded, and some resources failed.
6: The run succeeded, and included both changes and failures.
○ --digest: Change the certificate fingerprinting digest algorithm. The default is
SHA256. Valid values depends on the version of OpenSSL installed, but will likely
contain MD5, MD2, SHA1 and SHA256.
○ --disable: Disable working on the local system. This puts a lock file in place,
causing 'puppet agent' not to work on the system until the lock file is removed. This
is useful if you are testing a configuration and do not want the central configuration
to override the local state until everything is tested and committed.
Disable can also take an optional message that will be reported by the 'puppet agent'
at the next disabled run.
'puppet agent' uses the same lock file while it is running, so no more than one
'puppet agent' process is working at a time.
'puppet agent' exits after executing this.
○ --enable: Enable working on the local system. This removes any lock file, causing
'puppet agent' to start managing the local system again However, it continues to use
its normal scheduling, so it might not start for another half hour.
'puppet agent' exits after executing this.
○ --evaltrace: Logs each resource as it is being evaluated. This allows you to
interactively see exactly what is being done. (This is a Puppet setting, and can go in
puppet.conf. Note the special 'no-' prefix for boolean settings on the command line.)
○ --fingerprint: Display the current certificate or certificate signing request
fingerprint and then exit. Use the '--digest' option to change the digest algorithm
used.
○ --help: Print this help message
○ --job-id: Attach the specified job id to the catalog request and the report used for
this agent run. This option only works when '--onetime' is used. When using Puppet
Enterprise this flag should not be used as the orchestrator sets the job-id for you
and it must be unique.
○ --logdest: Where to send log messages. Choose between 'syslog' (the POSIX syslog
service), 'eventlog' (the Windows Event Log), 'console', or the path to a log file. If
debugging or verbosity is enabled, this defaults to 'console'. Otherwise, it defaults
to 'syslog' on POSIX systems and 'eventlog' on Windows. Multiple destinations can be
set using a comma separated list (eg: /path/file1,console,/path/file2)"
A path ending with '.json' will receive structured output in JSON format. The log file
will not have an ending ']' automatically written to it due to the appending nature of
logging. It must be appended manually to make the content valid JSON.
A path ending with '.jsonl' will receive structured output in JSON Lines format.
○ --masterport: The port on which to contact the Puppet Server. (This is a Puppet
setting, and can go in puppet.conf. Deprecated in favor of the 'serverport' setting.)
○ --noop: Use 'noop' mode where the daemon runs in a no-op or dry-run mode. This is
useful for seeing what changes Puppet would make without actually executing the
changes. (This is a Puppet setting, and can go in puppet.conf. Note the special 'no-'
prefix for boolean settings on the command line.)
○ --onetime: Run the configuration once. Runs a single (normally daemonized) Puppet run.
Useful for interactively running puppet agent when used in conjunction with the
--no-daemonize option. (This is a Puppet setting, and can go in puppet.conf. Note the
special 'no-' prefix for boolean settings on the command line.)
○ --serverport: The port on which to contact the Puppet Server. (This is a Puppet
setting, and can go in puppet.conf.)
○ --sourceaddress: Set the source IP address for transactions. This defaults to
automatically selected. (This is a Puppet setting, and can go in puppet.conf.)
○ --test: Enable the most common options used for testing. These are 'onetime',
'verbose', 'no-daemonize', 'no-usecacheonfailure', 'detailed-exitcodes', 'no-splay',
and 'show_diff'.
○ --trace Prints stack traces on some errors. (This is a Puppet setting, and can go in
puppet.conf. Note the special 'no-' prefix for boolean settings on the command line.)
○ --verbose: Turn on verbose reporting.
○ --version: Print the puppet version number and exit.
○ --waitforcert: This option only matters for daemons that do not yet have certificates
and it is enabled by default, with a value of 120 (seconds). This causes 'puppet
agent' to connect to the server every 2 minutes and ask it to sign a certificate
request. This is useful for the initial setup of a puppet client. You can turn off
waiting for certificates by specifying a time of 0. (This is a Puppet setting, and can
go in puppet.conf.)
○ --write_catalog_summary After compiling the catalog saves the resource list and
classes list to the node in the state directory named classes.txt and resources.txt
(This is a Puppet setting, and can go in puppet.conf.)
EXAMPLE
$ puppet agent --server puppet.domain.com
DIAGNOSTICS
Puppet agent accepts the following signals:
SIGHUP Restart the puppet agent daemon.
SIGINT and SIGTERM
Shut down the puppet agent daemon.
SIGUSR1
Immediately retrieve and apply configurations from the puppet master.
SIGUSR2
Close file descriptors for log files and reopen them. Used with logrotate.
AUTHOR
Luke Kanies
COPYRIGHT
Copyright (c) 2011 Puppet Inc., LLC Licensed under the Apache 2.0 License