NAME

       swtpm_bios - BIOS simulation tool for swtpm

SYNOPSIS

       swtpm_bios [OPTIONS]

DESCRIPTION

       swtpm_bios is a tool that can send the commands to the TPM (swtpm program) that typically
       are used by the BIOS to initialize the TPM.  The user can choose among several command
       line options to choose the state the TPM should be set to.

       This command requires the environment variable TCSD_USE_TCP_DEVICE to be set for
       communication via TCP. Otherwise it will use the device set in the environment variable
       TPM_DEVICE or fall back to use /dev/tpm0 to send the commands to. In TCP mode, the
       environment variable TCSD_TCP_DEVICE_HOSTNAME is used to indicate the host to send the
       commands to. By default localhost is assumed. The default TCP port is 6545 unless the
       environment variable TCSD_TCP_DEVICE_PORT indicates another port.

       In case of success 0 will be returned. In case a TPM error was encountered the return code
       will be 128. In case of communcation failure 255 is returned. In case the TPM needs to be
       reset to become activated, 129 will be returned.

       This command will send the following sequence of commands to the TPM.

       TPM_Startup(chosen mode) -- startup TPM
       TSC_PhysicalPresence(0x20) -- PhysicalPresenceCMDEnable
       TSC_PhysicalPresence(0x08) -- turn on physical presence
       TPM_GetCapability -- get permanent flags
       TPM_PhysicalEnable -- enable the TPM
       TPM_PhysicalSetDeactivated(0x0) -- activate TPM
       TPM_ContinueSelfTest -- continue self test
       TSC_PhysicalPresence(0x20) -- PhysicalPresenceCMDEnable
       TSC_PhysicalPresence(0x14) -- turn off physical presence & lock it

       The following options are supported:

       --tpm-device <device>
           Use the given device rather than the default /dev/tpm0. This option overrides the
           TPM_DEVICE environment variable.

       --tcp <server>:<port>
           Connect to the given server and port; if no server is given, 127.0.0.1 is used; if
           port is not given, the default port 6545 is used.

       --unix <path>
           Connect to the given UnixIO path.

       -tpm2
           The device is a TPM 2.

       -c  Send TPM_Startup(ST_CLEAR) (default). This instructs the TPM to start with clear
           state.

       -s  Send TPM_Startup(ST_STATE). This instructs the TPM to start by restoring previously
           saved state.

       -d  Send TPM_Startup(ST_DEACTIVATED). This instructs the TPM to start in deactivated mode.
           This option has no effect on a TPM 2.

       -n  Don't send a TPM_Startup command.

       -o  Only send the startup command and nothing else.

       -ea Make sure that the TPM is activated; if the TPM requires a reset, the program will
           exist and return a return code of 129.

       -cs Send a TPM_ContinueSelfTest command to a TPM 1.2 and a TPM2_IncrementalSelfTest
           command to a TPM 2.

       -u  Give up physical presence on a TPM 1.2. In case of a TPM 2 set the platform hierarchy
           to a random password.

       -v  Display version and exit.

       -h  Display the help screen and exit.

SEE ALSO

REPORTING BUGS

       Report bugs to Stefan Berger <stefanb@linux.vnet.ibm.com>