Provided by: manpages-dev_6.7-2_all 
NAME
readv, writev, preadv, pwritev, preadv2, pwritev2 - read or write data into multiple
buffers
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <sys/uio.h>
ssize_t readv(int fd, const struct iovec *iov, int iovcnt);
ssize_t writev(int fd, const struct iovec *iov, int iovcnt);
ssize_t preadv(int fd, const struct iovec *iov, int iovcnt,
off_t offset);
ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt,
off_t offset);
ssize_t preadv2(int fd, const struct iovec *iov, int iovcnt,
off_t offset, int flags);
ssize_t pwritev2(int fd, const struct iovec *iov, int iovcnt,
off_t offset, int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
preadv(), pwritev():
Since glibc 2.19:
_DEFAULT_SOURCE
glibc 2.19 and earlier:
_BSD_SOURCE
DESCRIPTION
The readv() system call reads iovcnt buffers from the file associated with the file
descriptor fd into the buffers described by iov ("scatter input").
The writev() system call writes iovcnt buffers of data described by iov to the file
associated with the file descriptor fd ("gather output").
The pointer iov points to an array of iovec structures, described in iovec(3type).
The readv() system call works just like read(2) except that multiple buffers are filled.
The writev() system call works just like write(2) except that multiple buffers are written
out.
Buffers are processed in array order. This means that readv() completely fills iov[0]
before proceeding to iov[1], and so on. (If there is insufficient data, then not all
buffers pointed to by iov may be filled.) Similarly, writev() writes out the entire
contents of iov[0] before proceeding to iov[1], and so on.
The data transfers performed by readv() and writev() are atomic: the data written by
writev() is written as a single block that is not intermingled with output from writes in
other processes; analogously, readv() is guaranteed to read a contiguous block of data
from the file, regardless of read operations performed in other threads or processes that
have file descriptors referring to the same open file description (see open(2)).
preadv() and pwritev()
The preadv() system call combines the functionality of readv() and pread(2). It performs
the same task as readv(), but adds a fourth argument, offset, which specifies the file
offset at which the input operation is to be performed.
The pwritev() system call combines the functionality of writev() and pwrite(2). It
performs the same task as writev(), but adds a fourth argument, offset, which specifies
the file offset at which the output operation is to be performed.
The file offset is not changed by these system calls. The file referred to by fd must be
capable of seeking.
preadv2() and pwritev2()
These system calls are similar to preadv() and pwritev() calls, but add a fifth argument,
flags, which modifies the behavior on a per-call basis.
Unlike preadv() and pwritev(), if the offset argument is -1, then the current file offset
is used and updated.
The flags argument contains a bitwise OR of zero or more of the following flags:
RWF_DSYNC (since Linux 4.7)
Provide a per-write equivalent of the O_DSYNC open(2) flag. This flag is
meaningful only for pwritev2(), and its effect applies only to the data range
written by the system call.
RWF_HIPRI (since Linux 4.6)
High priority read/write. Allows block-based filesystems to use polling of the
device, which provides lower latency, but may use additional resources.
(Currently, this feature is usable only on a file descriptor opened using the
O_DIRECT flag.)
RWF_SYNC (since Linux 4.7)
Provide a per-write equivalent of the O_SYNC open(2) flag. This flag is meaningful
only for pwritev2(), and its effect applies only to the data range written by the
system call.
RWF_NOWAIT (since Linux 4.14)
Do not wait for data which is not immediately available. If this flag is
specified, the preadv2() system call will return instantly if it would have to read
data from the backing storage or wait for a lock. If some data was successfully
read, it will return the number of bytes read. If no bytes were read, it will
return -1 and set errno to EAGAIN (but see BUGS). Currently, this flag is
meaningful only for preadv2().
RWF_APPEND (since Linux 4.16)
Provide a per-write equivalent of the O_APPEND open(2) flag. This flag is
meaningful only for pwritev2(), and its effect applies only to the data range
written by the system call. The offset argument does not affect the write
operation; the data is always appended to the end of the file. However, if the
offset argument is -1, the current file offset is updated.
RETURN VALUE
On success, readv(), preadv(), and preadv2() return the number of bytes read; writev(),
pwritev(), and pwritev2() return the number of bytes written.
Note that it is not an error for a successful call to transfer fewer bytes than requested
(see read(2) and write(2)).
On error, -1 is returned, and errno is set to indicate the error.
ERRORS
The errors are as given for read(2) and write(2). Furthermore, preadv(), preadv2(),
pwritev(), and pwritev2() can also fail for the same reasons as lseek(2). Additionally,
the following errors are defined:
EINVAL The sum of the iov_len values overflows an ssize_t value.
EINVAL The vector count, iovcnt, is less than zero or greater than the permitted maximum.
EOPNOTSUPP
An unknown flag is specified in flags.
VERSIONS
C library/kernel differences
The raw preadv() and pwritev() system calls have call signatures that differ slightly from
that of the corresponding GNU C library wrapper functions shown in the SYNOPSIS. The
final argument, offset, is unpacked by the wrapper functions into two arguments in the
system calls:
unsigned long pos_l, unsigned long pos
These arguments contain, respectively, the low order and high order 32 bits of offset.
STANDARDS
readv()
writev()
POSIX.1-2008.
preadv()
pwritev()
BSD.
preadv2()
pwritev2()
Linux.
HISTORY
readv()
writev()
POSIX.1-2001, 4.4BSD (first appeared in 4.2BSD).
preadv(), pwritev(): Linux 2.6.30, glibc 2.10.
preadv2(), pwritev2(): Linux 4.6, glibc 2.26.
Historical C library/kernel differences
To deal with the fact that IOV_MAX was so low on early versions of Linux, the glibc
wrapper functions for readv() and writev() did some extra work if they detected that the
underlying kernel system call failed because this limit was exceeded. In the case of
readv(), the wrapper function allocated a temporary buffer large enough for all of the
items specified by iov, passed that buffer in a call to read(2), copied data from the
buffer to the locations specified by the iov_base fields of the elements of iov, and then
freed the buffer. The wrapper function for writev() performed the analogous task using a
temporary buffer and a call to write(2).
The need for this extra effort in the glibc wrapper functions went away with Linux 2.2 and
later. However, glibc continued to provide this behavior until glibc 2.10. Starting with
glibc 2.9, the wrapper functions provide this behavior only if the library detects that
the system is running a Linux kernel older than Linux 2.6.18 (an arbitrarily selected
kernel version). And since glibc 2.20 (which requires a minimum of Linux 2.6.32), the
glibc wrapper functions always just directly invoke the system calls.
NOTES
POSIX.1 allows an implementation to place a limit on the number of items that can be
passed in iov. An implementation can advertise its limit by defining IOV_MAX in
<limits.h> or at run time via the return value from sysconf(_SC_IOV_MAX). On modern Linux
systems, the limit is 1024. Back in Linux 2.0 days, this limit was 16.
BUGS
Linux 5.9 and Linux 5.10 have a bug where preadv2() with the RWF_NOWAIT flag may return 0
even when not at end of file.
EXAMPLES
The following code sample demonstrates the use of writev():
char *str0 = "hello ";
char *str1 = "world\n";
ssize_t nwritten;
struct iovec iov[2];
iov[0].iov_base = str0;
iov[0].iov_len = strlen(str0);
iov[1].iov_base = str1;
iov[1].iov_len = strlen(str1);
nwritten = writev(STDOUT_FILENO, iov, 2);
SEE ALSO
pread(2), read(2), write(2)